Monge assignment games

Un juego de asignación se define por una matriz A; donde cada fila representa un comprador y cada columna un vendedor. Si el comprador i se empareja a un vendedor j; el mercado produce aij unidades de utilidad. Estudiamos los juegos de asignación de Monge, es decir, aquellos juegos bilaterales de asignación en los cuales la matriz satisface la propiedad de Monge. Estas matrices pueden caracterizarse por el hecho de que en cualquier submatriz 2x2 un emparejamiento óptimo está situado en la diagonal principal. Para mercados cuadrados, describimos sus núcleos utilizando sólo la parte central tridiagonal de elementos de la matriz. Obtenemos una fórmula cerrada para el reparto óptimo de los compradores dentro del núcleo y para el reparto óptimo de los vendedores dentro del núcleo. Analizamos también los mercados no cuadrados reduciéndolos a matrices cuadradas apropiadas.

Minimal analytical characterisation of engineered nanomaterials need for hazard assessment in biological matrices

The safe and responsible development of engineered nanomaterials (ENM), nanotechnology-based materials and products, together with the definition of regulatory measures and implementation of "nano"-legislation in Europe require a widely supported scientific basis and sufficient high quality data upon which to base decisions. At the very core of such a scientific basis is a general agreement on key issues related to risk assessment of ENMs which encompass the key parameters to characterise ENMs, appropriate methods of analysis and best approach to express the effect of ENMs in widely accepted dose response toxicity tests. The following major conclusions were drawn: Due to high batch variability of ENMs characteristics of commercially available and to a lesser degree laboratory made ENMs it is not possible to make general statements regarding the toxicity resulting from exposure to ENMs. 1) Concomitant with using the OECD priority list of ENMs, other criteria for selection of ENMs like relevance for mechanistic (scientific) studies or risk assessment-based studies, widespread availability (and thus high expected volumes of use) or consumer concern (route of consumer exposure depending on application) could be helpful. The OECD priority list is focussing on validity of OECD tests. Therefore source material will be first in scope for testing. However for risk assessment it is much more relevant to have toxicity data from material as present in products/matrices to which men and environment are be exposed. 2) For most, if not all characteristics of ENMs, standardized methods analytical methods, though not necessarily validated, are available. Generally these methods are only able to determine one single characteristic and some of them can be rather expensive. Practically, it is currently not feasible to fully characterise ENMs. Many techniques that are available to measure the same nanomaterial characteristic produce contrasting results (e.g. reported sizes of ENMs). It was recommended that at least two complementary techniques should be employed to determine a metric of ENMs. The first great challenge is to prioritise metrics which are relevant in the assessment of biological dose response relations and to develop analytical methods for characterising ENMs in biological matrices. It was generally agreed that one metric is not sufficient to describe fully ENMs. 3) Characterisation of ENMs in biological matrices starts with sample preparation. It was concluded that there currently is no standard approach/protocol for sample preparation to control agglomeration/aggregation and (re)dispersion. It was recommended harmonization should be initiated and that exchange of protocols should take place. The precise methods used to disperse ENMs should be specifically, yet succinctly described within the experimental section of a publication. 4) ENMs need to be characterised in the matrix as it is presented to the test system (in vitro/ in vivo). 5) Alternative approaches (e.g. biological or in silico systems) for the characterisation of ENMS are simply not possible with the current knowledge. Contributors: Iseult Lynch, Hans Marvin, Kenneth Dawson, Markus Berges, Diane Braguer, Hugh J. Byrne, Alan Casey, Gordon Chambers, Martin Clift, Giuliano Elia1, Teresa F. Fernandes, Lise Fjellsbø, Peter Hatto, Lucienne Juillerat, Christoph Klein, Wolfgang Kreyling, Carmen Nickel1, and Vicki Stone.

Brain Connectivity Analysis in Children. Effects of Prematurity. and Prenatal Growth Restriction

Introduction: Survival of children born prematurely or with very low birth weight has increased dramatically, but the long term developmental outcome remains unknown. Many children have deficits in cognitive capacities, in particular involving executive domains and those disabilities are likely to involve a central nervous system deficit. To understand their neurostructural origin, we use DTI. Structurally segregated and functionally regions of the cerebral cortex are interconnected by a dense network of axonal pathways. We noninvasively map these pathways across cortical hemispheres and construct normalized structural connection matrices derived from DTI MR tractography. Group comparisons of brain connectivity reveal significant changes in fiber density in case of children with poor intrauterine grown and extremely premature children (gestational age<28 weeks at birth) compared to control subjects. This changes suggest a link between cortico-axonal pathways and the central nervous system deficit. Methods: Sixty premature born infants (5-6 years old) were scanned on clinical 3T scanner (Magnetom Trio, Siemens Medical Solutions, Erlangen, Germany) at two hospitals (HUG, Geneva and CHUV, Lausanne). For each subject, T1-weighted MPRAGE images (TR/TE=2500/2.91,TI=1100, resolution=1x1x1mm, matrix=256x154) and DTI images (30 directions, TR/TE=10200/107, in-plane resolution=1.8x1.8x2mm, 64 axial, matrix=112x112) were acquired. Parent(s) provided written consent on prior ethical board approval. The extraction of the Whole Brain Structural Connectivity Matrix was performed following (Cammoun, 2009 and Hagmann, 2008). The MPARGE images were registered using an affine registration to the non-weighted-DTI and WM-GM segmentation performed on it. In order to have equal anatomical localization among subjects, 66 cortical regions with anatomical landmarks were created using the curvature information, i.e. sulcus and gyrus (Cammoun et al, 2007; Fischl et al, 2004; Desikan et al, 2006) with freesurfer software (http://surfer.nmr.mgh.harvard.edu/). Tractography was performed in WM using an algorithm especially designed for DTI/DSI data (Hagmann et al., 2007) and both information were then combined in a matrix. Each row and column of the matrix corresponds to a particular ROI. Each cell of index (i,j) represents the fiber density of the bundle connecting the ROIs i and j. Subdividing each cortical region, we obtained 4 Connectivity Matrices of different resolution (33, 66, 125 and 250 ROI/hemisphere) for each subject . Subjects were sorted in 3 different groups, namely (1) control, (2) Intrauterine Growth Restriction (IUGR), (3) Extreme Prematurity (EP), depending on their gestational age, weight and percentile-weight score at birth. Group-to-group comparisons were performed between groups (1)-(2) and (1)-(3). The mean age at examination of the three groups were similar. Results: Quantitative analysis were performed between groups to determine fibers density differences. For each group, a mean connectivity matrix with 33ROI/hemisphere resolution was computed. On the other hand, for all matrix resolutions (33,66,125,250 ROI/hemisphere), the number of bundles were computed and averaged. As seen in figure 1, EP and IUGR subjects present an overall reduction of fibers density in both interhemispherical and intrahemispherical connections. This is given quantitatively in table 1. IUGR subjects presents a higher percentage of missing fiber bundles than EP when compared to control subjects (~16% against 11%). When comparing both groups to control subjects, for the EP subjects, the occipito-parietal regions seem less interhemispherically connected whilst the intrahemispherical networks present lack of fiber density in the lymbic system. Children born with IUGR, have similar reductions in interhemispherical connections than the EP. However, the cuneus and precuneus connections with the precentral and paracentral lobe are even lower than in the case of the EP. For the intrahemispherical connections the IUGR group preset a loss of fiber density between the deep gray matter structures (striatum) and the frontal and middlefrontal poles, connections typically involved in the control of executive functions. For the qualitative analysis, a t-test comparing number of bundles (p-value<0.05) gave some preliminary significant results (figure 2). Again, even if both IUGR and EP appear to have significantly less connections comparing to the control subjects, the IUGR cohort seems to present a higher lack of fiber density specially relying the cuneus, precuneus and parietal areas. In terms of fiber density, preliminary Wilcoxon tests seem to validate the hypothesis set by the previous analysis. Conclusions: The goal of this study was to determine the effect of extreme prematurity and poor intrauterine growth on neurostructural development at the age of 6 years-old. This data indicates that differences in connectivity may well be the basis for the neurostructural and neuropsychological deficit described in these populations in the absence of overt brain lesions (Inder TE, 2005; Borradori-Tolsa, 2004; Dubois, 2008). Indeed, we suggest that IUGR and prematurity leads to alteration of connectivity between brain structures, especially in occipito-parietal and frontal lobes for EP and frontal and middletemporal poles for IUGR. Overall, IUGR children have a higher loss of connectivity in the overall connectivity matrix than EP children. In both cases, the localized alteration of connectivity suggests a direct link between cortico-axonal pathways and the central nervous system deficit. Our next step is to link these connectivity alterations to the performance in executive function tests.

Volcanic stratigraphy of Hannah Point, Livingston Island, South Shetland Islands, Antarctica

The Upper Cretaceous volcanic succession of Hannah Point is the best exposure of the Antarctic Peninsula Volcanic Group on L ivingston Island. The aim of the present paper is to contribute to the characterisation of the stratigr a p hy and petrogr a p hy of this little studied succession, and briefly discuss some aspects of the eru p t ive style of its volcanism. The succession is about 470 m thick and is here subdivided into five lithostratigraphic units (A to E from base to top). Unit A, approximately 120 m thick, is mainly composed of polymict clast-supported volcaniclastic breccias and also includes a dacitic lava laye r. Interstratified in the breccias of this unit, there is a thin laminated devitrified layer which shows some degree of welding. Unit B, approx imately 70 m thick, is almost entirely composed of volcaniclastic breccias, and includes a volcaniclastic conglomerate laye r. Breccias in this unit can be subdivided into two distinct types; polymict clast-supported breccias, and monomict matrix-supported breccias rich in juvenile components and displaying incipient welding. Unit C, about 65 m thick, is mainly composed of basaltic lavas, which are interlayered with minor vo lcaniclastic breccias. Unit D, approximately 65 m thick, is lithologically similar to unit B, composed of an alternation of polymict clasts upported breccias and matrix-supported breccias, and includes a volcaniclastic conglomerate laye r. Unit E, about 150 m thick, is mainly formed of thick andesitic lava layers. Minor basaltic dykes and a few normal faults cut the succession, and the contact betwe e n units A and B can be interpreted both as an unconformity or a fault. The matrix-supported breccias included in the succession of Hannah Point have high contents of juvenile components and incipient welding, which suggest that part of the succession is the result of pyroclastic fragmentation and emplacement from pyroclastic flows. In contrast, the polymict clast-supported breccias suggest reworking of previous deposits and deposition from cool mass flows. The lavas indicate eff u s ive volcanic eruptions, and the absence of features indicative of subaqueous volcanism suggests that at least these portions of the succession were emplaced in a subaerial environment .

A Different Perspective for Investigation of PCC Pavement Deterioration, HR-2074, 1995

Portland Cement Concrete (PCC) pavement has served the State of Iowa well for many years. The oldest Iowa pavement was placed in LeMars in 1904. Beginning in 1931, many miles of PCC pavement were built to "get out of the mud". Many of these early pavements provided good performance without deterioration for more than 50 years. In the late 1950s, Iowa was faced with severe PCC pavement deterioration called D cracking. Research identified the cause of this deterioration as crushed limestone containing a bad pore system. Selective quarrying and ledge control has alleviated this problem. In 1990, cracking deterioration was identified on a three-year-old pavement on US 20 in central Iowa. The coarse aggregate was a crushed limestone with an excellent history of performance in PCC pavement. Examination of cores showed very few cracks through the coarse aggregate particles. The cracks were predominately confined to the matrix. The deterioration was identified as alkali-silica reactivity (ASR) by a consultant. To investigate the cause of the deterioration, the Iowa DOT and Iowa State University jointly purchased a high resolution, low vacuum Hitachi Scanning Electron Microscope (SEM) with an energy dispersion detector. Subsequent evaluation identified no concentration of silica gel (silicon-Si), but did identify substantial amounts of sulfur-S and aluminum-AL (assumed to be ettringite) in the air voids. Some of these voids have cracks radiating from them leading us to conclude that the ettringite filled voids were a center of pressure causing the crack. The ettringite in the voids, after being subjected to sodium chloride (NaCl), initially swells and then dissolves. This low vacuum SEM research of PCC pavement deterioration supports the following conclusions: (1) A low vacuum SEM and an energy dispersion detector are very important for proper evaluation of PCC pavement deterioration; (2) There are instances today where PCC pavement deterioration is mistakenly identified as ASR; (3) Ettringite initially expands when subjected to NaCl; and the ettringite filled voids are a center-of-pressure that cracks the PCC; and (4) The deterioration of some current premature PCC pavement distress locations is caused by factors related to the formation of excessive ettringite.

Fast analysis of doping agents in urine by ultra-high-pressure liquid chromatography-quadrupole time-of-flight mass spectrometry I. Screening analysis.

The general strategy to perform anti-doping analyses of urine samples starts with the screening for a wide range of compounds. This step should be fast, generic and able to detect any sample that may contain a prohibited substance while avoiding false negatives and reducing false positive results. The experiments presented in this work were based on ultra-high-pressure liquid chromatography coupled to hybrid quadrupole time-of-flight mass spectrometry. Thanks to the high sensitivity of the method, urine samples could be diluted 2-fold prior to injection. One hundred and three forbidden substances from various classes (such as stimulants, diuretics, narcotics, anti-estrogens) were analysed on a C(18) reversed-phase column in two gradients of 9min (including two 3min equilibration periods) for positive and negative electrospray ionisation and detected in the MS full scan mode. The automatic identification of analytes was based on retention time and mass accuracy, with an automated tool for peak picking. The method was validated according to the International Standard for Laboratories described in the World Anti-Doping Code and was selective enough to comply with the World Anti-Doping Agency recommendations. In addition, the matrix effect on MS response was measured on all investigated analytes spiked in urine samples. The limits of detection ranged from 1 to 500ng/mL, allowing the identification of all tested compounds in urine. When a sample was reported positive during the screening, a fast additional pre-confirmatory step was performed to reduce the number of confirmatory analyses.

A general theory of rank testing

This paper develops an approach to rank testing that nests all existing rank tests andsimplifies their asymptotics. The approach is based on the fact that implicit in every ranktest there are estimators of the null spaces of the matrix in question. The approach yieldsmany new insights about the behavior of rank testing statistics under the null as well as localand global alternatives in both the standard and the cointegration setting. The approach alsosuggests many new rank tests based on alternative estimates of the null spaces as well as thenew fixed-b theory. A brief Monte Carlo study illustrates the results.

Cellular and viral factors implicated in persistent infection in canine distemper virus

Summary SLAM (signalling lymphocyte activation molecule, CD150) serves as a cellular receptor for different morbiliviruses, including measles virus and canine distemper virus. Laboratory cell lines that do not express dog SLAM are therefore quite refractory to infection by wildtype CDV. SLAM expression is not only required for CDV virion attachment, but also for the establishment of cytolytic infection characterized by syncytia formation. In order to determine if SLAM has a direct influence on CDV replication, we compared wild-type and mutated SLAM variants for their capacity to influence viral polymerase activity and syncytia formation. Deletion of immunoreceptor tyrosine-based signalling motif (ITSM) in the cytoplasmic tail of SLAM did not seem to influence viral replication, viral polymerase activity or cell-to cell fusion. Instead, it was the level of cell surface expression of SLAM, which was important. Additional experiments corroborated the importance of SLAM for efficient cell-to cell fusion: Both SLAM, as well as viral fusion (F) and attachment (H) glycoproteins, were found to be required for efficient cell-to-cell fusion, which, in turn, enhanced the activity of the viral polymerase and, viral replication. Wild-type A75/17 canine distemper virus (CDV) strain is known to induce a persistent infection in the central nervous system and in dog footpad keratinocytes in vivo. Recently, it has been shown that the A75/17 virus could also infect canine footpad keratinocytes (CFKs) in vitro. CFK infection with A75/17 was initially inefficient and produced very little virus progeny, however, after only three passages the adapted virus produced more progeny and induced limited syncytia formation. Sequence comparison between the A75/17 and the CFKadapted A75/17-K virus revealed three amino acid differences, one in the phosphoprotein (P), one in the matrix protein (M) and one in the H protein. In order to identify viral determinants of A75/17-K adaptation, recombinant viruses containing one, two or three nucleotides substitutions were analyzed. The amino acid substitution in the M protein was without effect on viral particle formation. In contrast, the amino acid substitution in the cytoplasmic tail of H protein was clearly important for syncytia formation. Concerning the mutation in the P protein, it led to an increase in viral replication. However, we cannot rule out that the observed effect is due to the amino acid substitutions in the overlapping accessory proteins C and V, also affected by the P mutation. The adaptation of wild-type CDV strains to cell culture almost always involves modifications of M protein. In order to understand the influence of these modifications, we tested recombinant A75/17 viruses bearing different M proteins. Preliminary results demonstrated that the M protein from the Vero-adapted strain reduced syncytia formation. Future studies will focus on the M mRNA and protein stability, its expression level, localisation and its effect on viral particles formation and on the phenotype of infection. Résumé La protéine SLAM (signalling lymphocyte activation molecule ou CD150) est utilisée comme récepteur cellulaire par les morbillivirus parmi lesquels on trouve le virus de la rougeole (VR) ainsi que le virus de la maladie de Carré (CDV). Les lignées cellulaires qui n'expriment pas la protéine SLAM du chien à leur surface sont réfractaires à l'infection par les souches sauvages de CDV. Le récepteur SLAM n'est pas seulement requis pour l'attachement du virion à la surface de la cellule, mais il participe également de façon active à l'établissement d'une infection cytolytique à travers la formation de syncytia. Afin de déterminer si la protéine SLAM exerce une influence directe sur la réplication virale du virus de la maladie de Carré, nous avons généré différentes protéines tronquées de SLAM et comparé leurs capacités à influencer l'activité de la polymérase ainsi que la formation de syncytia. Nos résultas ont montré que la réplication virale, l'activité de la polymérase ainsi que la fusion cellulaire ne semblent pas être influencées par les délétions dans les régions cytoplasmiques du récepteur SLAM. Cependant, ces délétions agissent sur l'expression de la protéine SLAM à la surface des cellules. Les expériences additionnelles ont permis de souligner l'importance de la protéine SLAM dans le phénomène de fusion entre cellules. En effet, la protéine SLAM ainsi que les deux glycoprotéines virales F et H sont requises pour la formation de syncytia, laquelle induit une augmentation de l'activité de la polymérase ainsi que de la réplication virale. La souche virulente A75/17 du virus, de la Maladie de Carré est connue pour induire une infection persistante au niveau du système nerveux central ainsi que dans les kératinocytes de pattes chez le chien. Des études récentes ont montré que des cultures primaires de kératinocytes de chien pouvaient aussi êtres infectées par la souche A75/17 de CDV. En effet, le virus induit une infection persistante en produisant très peu de progéniture. Cependant, trois passages du virus sauvage A75/17 dans ces cultures aboutissent à la sélection d'un virus produisant plus de progéniture et favorisant la formation limitée de syncytia. La comparaison des séquences génomique entre la souche A75/17 et la souche adaptée A75/17-K montre une différence de trois nucléotides. La première mutation, située dans le gène P, modifie la phosphoprotéine (P) ainsi que les protéines V et C. La deuxième se situe dans le gène de la protéine matricielle (M) et la dernière dans celui de la protéine d'attachement (H). Afin de déterminer les facteurs viraux impliqués lors de l'adaptation virale dans la culture primaire de kératinocytes, des virus recombinants contenant une, deux ou trois de ces mutations ont été analysés. La substitution d'un acide aminé dans la protéine M reste sans effet sur la production de particules virales. En revanche, la substitution d'un acide aminé dans la queue cytoplasmique de la protéine H s'avère clairement importante pour la formation de syncytia. Quant à la mutation dans le gène P, elle permet une augmentation de la réplication virale. Cependant, nous ne pouvons pas écarter l'hypothèse que l'augmentation de la réplication virale soit due aux substitutions d'un acide aminé dans les protéines accessoires V et C qui sont, elles aussi, affectées par la mutation dans le gène P. L'adaptation des souches sauvages de CDV aux cultures de cellules induit presque toujours des modifications de la protéine matricielle M. Afin de comprendre l'influence de ces modifications, nous avons testé 'des virus A75/17 recombinants contenant différentes protéines M. Les résultats préliminaires ont démontré que la protéine M de la souche adaptée aux cellules Vero réduisait la formation de syncytia. Les études futures seront axées sur la stabilité de l'ARN messager, celle de la protéine M, de son niveau d'expression, de sa localisation cellulaire et de son effet sur la formation de particules virale ainsi que sur le phénotype de l'infection.

Knot localization in proteins.

The backbones of proteins form linear chains. In the case of some proteins, these chains can be characterized as forming linear open knots. The knot type of the full chain reveals only limited information about the entanglement of the chain since, for example, subchains of an unknotted protein can form knots and subchains of a knotted protein can form different types of knots than the entire protein. To understand fully the entanglement within the backbone of a given protein, a complete analysis of the knotting within all of the subchains of that protein is necessary. In the present article, we review efforts to characterize the full knotting complexity within individual proteins and present a matrix that conveys information about various aspects of protein knotting. For a given protein, this matrix identifies the precise localization of knotted regions and shows the knot types formed by all subchains. The pattern in the matrix can be considered as a knotting fingerprint of that protein. We observe that knotting fingerprints of distantly related knotted proteins are strongly conserved during evolution and discuss how some characteristic motifs in the knotting fingerprints are related to the structure of the knotted regions and their possible biological role.

A Different Perspective for Investigation of PCC Pavement Deterioration, HR-2074, Interim Report, 1996

Many early Iowa Portland Cement Concrete (PCC) pavements provided good performance without deterioration for more than 50 years. In the late 1950's, Iowa was faced with severe PCC pavement deterioration called D cracking due to crushed limestone containing a bad pore system. Selective quarrying solved the problem. In 1990, cracking deterioration was identified on a three year old US 20 pavement in central Iowa. The coarse aggregate was a crushed limestone with an excellent history of performance in PCC pavement. Examination of cores showed very few cracks through the coarse aggregate particles. The cracks were predominately confined to the matrix. A high resolution, low vacuum Hitachi Scanning Electron Microscope (SEM) with an energy dispersion detector was used to investigate the deterioration. Subsequent evaluation identified very little concentration of silica gel (silicon-Si), but did identify substantial amounts of sulfur-s and aluminum-Al (assumed to be ettringite) in the air voids. Some of these voids have cracks radiating from them leading us to conclude that the ettringite filled voids were a center of pressure causing the crack. The ettringite in the voids, after being subjected to sodium chloride (NaCl) brine, initially swells and then dissolves. The research has led to the conclusion that the premature deterioration may be due to ettringite and may have been mistakenly identified as Alkali-Silica reactivity (ASR).

Investigation of PCC Pavement Deterioration: A Few Facts are Worth More than 100 Opinions, Interim Report, HR-2074, 1995

Portland Cement Concrete (PCC) pavement has served the State of Iowa well for many years. The oldest Iowa pavement was placed in LeMars in 1904. Beginning in 1931, many miles of PCC pavement were built to "get out of the mud.” Many of these early pavements provided good performance without deterioration for more than 50 years. In the late 1950's, Iowa was faced with severe PCC pavement deterioration referred to as D cracking. Research identified the cause of this deterioration as crushed limestone containing a bad pore system. Selective quarrying and ledge control has alleviated this problem. In 1990, cracking deterioration was identified on a three year old pavement on us 20 in central Iowa. The coarse aggregate was a crushed limestone with an excellent history of performance in PCC pavement. Examination of cores showed very few cracks through the coarse aggregate particles. The cracks were predominately confined to the matrix. The deterioration was identified as alkali-silica reactivity (ASR) by a consultant.

Fluorescence flow cytometer to determine urine particle reference intervals in doping control samples.

Background: Urine is still the matrix of choice to fight against doping, because it can be collected non-invasively during anti-doping tests. Most of the World Anti-Doping Agency's accredited laboratories have more than 20 years experience in analyzing this biological fluid and the majority of the compounds listed in the 2010 Prohibited List - International Standard are eliminated through the urinary apparatus. Storing and transporting urine samples for doping analyses does not include a specific protocol to prevent microbial and thermal degradation. The use of a rapid and reliable screening method could enable determine reference intervals for urine specimens in doping control samples and evaluate notably the prevalence of microbial contamination known to be responsible for the degradation of chemical substances in urine.Methods: The Sysmex(R) UF-500i is a recent urine flow cytometer analyzer capable of quantifying BACT and other urinary particles such as RBC, WBC, EC, DEBRIS, CAST, PATH. CAST, YLC, SRC as well as measuring urine conductivity. To determine urine anti-doping reference intervals, 501 samples received in our laboratory over a period of two months were submitted to an immediate examination. All samples were collected and then transported at room temperature. Analysis of variance was performed to test the effects of factors such as gender, test type [in-competition, out-of-competition] and delivery time.Results: The data obtained showed that most of the urine samples were highly contaminated with bacteria. The other urine particles were also very different according to the factors.Conclusions: The Sysmex(R) UF-500i was capable of providing a snapshot of urine particles present in the samples at the time of the delivery to the laboratory. These particles, BACT in particular, gave a good idea of the possible microbial degradation which had and/or could have occurred in the sample. This information could be used as the first quality control set up in WADA (World Anti-Doping Agency) accredited laboratories to determine if steroid profiles, endogenous and prohibited substances have possibly been altered. (C) 2011 Elsevier Ireland Ltd. All rights reserved.

Isolation and in vitro chondrogenic potential of human foetal spine cells.

Cell therapy for nucleus pulposus (NP) regeneration is an attractive treatment for early disc degeneration as shown by studies using autologous NP cells or stem cells. Another potential source of cells is foetal cells. We investigated the feasibility of isolating foetal cells from human foetal spine tissues and assessed their chondrogenic potential in alginate bead cultures. Histology and immunohistochemistry of foetal tissues showed that the structure and the matrix composition (aggrecan, type I and II collagen) of foetal intervertebral disc (IVD) were similar to adult IVD. Isolated foetal cells were cultured in monolayer in basic media supplemented with 10% Fetal Bovine Serum (FBS) and from each foetal tissue donation, a cell bank of foetal spine cells at passage 2 was established and was composed of around 2000 vials of 5 million cells. Gene expression and immunohistochemistry of foetal spine cells cultured in alginate beads during 28 days showed that cells were able to produce aggrecan and type II collagen and very low level of type I and type X collagen, indicating chondrogenic differentiation. However variability in matrix synthesis was observed between donors. In conclusion, foetal cells could be isolated from human foetal spine tissues and since these cells showed chondrogenic potential, they could be a potential cell source for IVD regeneration.

Intrinsic subspace convergence in TDD MIMO communication

In numerical linear algebra, students encounter earlythe iterative power method, which finds eigenvectors of a matrixfrom an arbitrary starting point through repeated normalizationand multiplications by the matrix itself. In practice, more sophisticatedmethods are used nowadays, threatening to make the powermethod a historical and pedagogic footnote. However, in the contextof communication over a time-division duplex (TDD) multipleinputmultiple-output (MIMO) channel, the power method takes aspecial position. It can be viewed as an intrinsic part of the uplinkand downlink communication switching, enabling estimationof the eigenmodes of the channel without extra overhead. Generalizingthe method to vector subspaces, communication in thesubspaces with the best receive and transmit signal-to-noise ratio(SNR) is made possible. In exploring this intrinsic subspace convergence(ISC), we show that several published and new schemes canbe cast into a common framework where all members benefit fromthe ISC.

Konfiguroituvan tuotteen tuoterakennesystematiikan kehittäminen

Ponsse Oyj:n kaltainen konfiguroituvaa, monimutkaista tuotetta valmistava yhtiö tarvitsee ehdottomasti nykyaikaisen modulaarisuuteen perustuvan tuoterakennesystematiikan. Käyttämällä osioita eri modulaarisuusmalleista ja soveltamalla niitä Ponssen näkökulmasta kaikkein edullisimmalla tavalla, on kehitetty ensimmäinen case - tapaus ja sen myötä mahdollisimman yksinkertainen toimintamalli. Mallissa on otettu huomioon myös useat tuoterakenteen kanssa vuorovaikutuksessa olevat tekijät. Myyntitilanteen valinnat ovat listattu konfigurointimatriisiin ja ne voivat olla itsenäisiä tai sulkea pois joitakin toisia valintoja. Kun sopiva koneyksilö on muodostettu, saadaan matriisista samantien tulostettua valintojen mukainen tuoteyksilö. Tuoteyksilön moduulirakenne toimii kyseisen, yksittäisen koneen työmääräimenä sekä koneenvalmistuksen dokumenttina, sillä luettelon yksi moduuli on yhden valmistettavantyövaiheen moduulipiirustus alimoduuleineen ja osineen. Moduulipiirustusten on siis otettava huomioon tuotannon, oston, suunnittelun ja dokumentoinnin näkökulmat. Piirustuksen laatijan on tiedettävä kyseisen moduulin valmistus eli koottavan komponenttikokoelman laajuus sekä tuotantolinjan että osto-osaston intressien mukaisesti. Piirustuksen on nivouduttava sitä kutsuvaan matriisiin ja kyseisen moduulin valinnan kytköksiin muihin moduuleihin nähden. Kaiken lisäksi piirustuksen on toimittava kokoonpano-ohjeena sekä jälkimarkkinoinnin työkaluna. Tässä työssä muodostettiin metsätraktorin ohjaamosta esimerkkitapaus. Case tapauksessa käytettiin työssä esitettyä uutta tuoterakennesystematiikkaa uuden modulaarisuussäännöstön käytöstä, laskettu sen aiheuttamat muutokset ja sen tuotantoon otosta on kerätty ensimmäiset kommentit. Esimerkillä pyrittiin saavuttamaan modulaarisen tuoterakenteen mahdollistamat edut ja projektia on jatkettu Ponsse Oyj:llä käsittämään muitakin tuotekokonaisuuksia.