Desempenho de clones de seringueira de origem amazônica no planalto do Estado de São Paulo

O objetivo deste trabalho foi avaliar a adaptabilidade e expressão fenotípica de caracteres superiores de dez clones amazônicos de seringueira (Hevea spp.) no planalto do Estado de São Paulo em um período de 10 anos, obedecendo ao delineamento de blocos ao acaso com três repetições e parcelas lineares de seis plantas. O clone IAN 3156 foi o mais produtivo, com média de 65,57 g de borracha seca/árvore/sangria, no período de quatro anos, seguido pelo clone RO 45 com 52,29 g de borracha seca/árvore/sangria, enquanto o clone-testemunha, RRIM 600, produziu 41,04 g/árvore/sangria. Todos os clones apresentaram crescimento vigoroso. O perímetro do caule na abertura do painel variou de 37,01 cm (IAN 3193) a 49,41 cm (IAN 4493). A porcentagem de plantas aptas à sangria variou de 30,0% (IAN 3703) a 93,75% (IAN 6323). Exceto os clones IAN 3156 e IAN 4493 com 7,00 mm e 6,32 mm, respectivamente, todos os outros clones apresentaram espessura de casca virgem inferior ao clone RRIM 600, que apresentou 6,18 mm. O clone IAN 3193 apresentou maior incidência de quebra do ponteiro pelo vento. Todos os clones estudados apresentaram baixa incidência de secamento de painel. O bom desempenho dos clones IAN 3156, RO 45, Fx 3899 e IAN 4493 permite que possam ser experimentados em larga escala, envolvendo diferentes ambientes no Estado de São Paulo.

Determinação do ponto de colheita e indução à abertura floral do crisântemo cultivar White Polaris em diferentes concentrações de sacarose

Realizou-se pesquisa objetivando determinar o melhor entre quatro pontos de colheita da haste floral de crisântemos de maço do tipo pompom cv. White Polaris a concentração mais adequada de sacarose para tratamento de pulsing dessas hastes: estas foram colhidas em estufa de produção comercial, nos pontos preestabelecidos e transportadas para laboratório, onde foram totalmente imersas em água de torneira, à sombra, durante três horas. Selecionaram-se as hastes pela uniformidade do seu desenvolvimento e cortaram-nas sob água na base do caule, entre 50 e 60 cm, e identificadas, o que permitiu avaliar as mudanças morfológicas associadas às inflorescências individuais. As hastes foram distribuídas e mantidas nos diferentes tratamentos de pulsing durante 24 horas, à luz branca contínua de 1.500 lux, 60 a 90% de umidade relativa do ar e temperatura ambiente de 25 ± 2°C. Após o tratamento de pulsing, as hastes foram transferidas para água destilada, permanecendo por 10 horas sob luz branca contínua, nas mesmas condições de laboratório citadas. A vida floral em vaso começou a ser avaliada na instalação do experimento, após o tratamento de pulsing, e terminou quando as folhas e pétalas perderam a turgescência e o valor decorativo. As hastes colhidas em estádio de botão (25 e 50% de abertura das inflorescências apicais) não alcançaram o ponto de abertura adequado em nenhuma das seis concentrações de sacarose (0 a 146,07 mol/m³); as concentrações de 116,9 146,1 mol/m³, porém, estimularam, em geral, a abertura de botões. Os pontos de colheita 1 e 2 (100 e 75% de abertura das inflorescências apicais respectivamente) apresentaram bons resultados em todas as concentrações de sacarose.

Manutenção da qualidade e aumento da longevidade floral de crisântemo cv. White polaris

0 objetivo do trabalho foi determinar o melhor tratamento pós-colheita para manutenção floral e aumento da longevidade de crisântemo de maço do tipo pompom (Dendranthema grandiflorum (Ramat.) S. Kitamura) cv. White Polaris. Estabeleceu-se como ponto de colheita o momento em que as hastes apresentavam três inflorescências apicais com as pétalas externas em ângulo de 45° em relação à horizontal. Durante o ensaio em laboratório, as hastes, colhidas em estufa de produção comercial, após totalmente imersas em água de torneira, à sombra, durante três horas, foram cortadas sob água na base do caule entre 50 e 60 cm. As hastes foram distribuídas nos diferentes tratamentos de pulsing durante 24 horas, com luz contínua de 1.500 lux, 60 a 90% de umidade relativa do ar e temperatura ambiente de 25 ± 2°C. No primeiro experimento, testou-se a eficiência de 8-hidroxiquinolina (8-HQ) e tiabendazole (TBZ) como germicidas de manutenção da qualidade na solução de pulsing; testaram-se, também, dois reguladores de crescimento, a saber: ácido giberélico (GA3), 6-benzilaminopurina (6-BA) ou a mistura dos dois, com o objetivo de preservar a cor e a turgidez da folhagem. Os melhores resultados foram com 8-HQ (0,69 mol/m³) e GA3 (0,058 mo1/m³). No segundo experimento, avaliaram-se os seguintes inibidores de etileno: tiossulfato de prata (STS), nitrato de prata (AgNO3) e cloreto de cobalto (COC1(2)). A melhor resposta foi obtida com AgNO3 (2,9 e 4,4 mo1/m³).

Proposta de avanço para o método Tambor-Pulmão-Corda Simplificado aplicado em ambientes de produção sob encomenda

Recentes aplicações da Teoria das Restrições em Gestão de Operações têm adotado o chamado método Tambor-Pulmão-Corda Simplificado (S-DBR - Simplified Drum-Buffer-Rope) como padrão para planejamento e controle da produção. Contudo, poucas são as referências bibliográficas, especialmente em periódicos nacionais e internacionais, que relatam seus principais conceitos e premissas. Este artigo se propõe a apresentar o método S-DBR para planejamento da produção e sua correspondente abordagem de controle da produção denominado Gerenciamento do Pulmão, aqui abordados em ambientes de produção sob encomenda (MTO - make to order), suas principais características, pressupostos e diferenças em relação ao método DBR clássico. É também apresentada uma proposta complementar ao método S-DBR para estabelecer promessas de entregas urgentes mantendo elevada probabilidade de entrega no prazo.

Avaliação da qualidade do corte florestal com motosserra

Objetivou-se, com esta pesquisa, avaliar a qualidade do corte florestal com motosserra, em propriedades rurais no sul do Espírito Santo, considerando aspectos da qualidade e a perda de madeira retida nas cepas. Foram lançadas parcelas de 250 m², onde foram feitas as observações após o corte com motosserra, avaliando-se a qualidade do corte nos seguintes aspectos: presença de espetos; danos por rachadura; cepas com faixa de ruptura fora do padrão; cepas sem o entalhe direcional e a altura da cepa remanescente, com vistas a mensurar a perda de madeira retida nas cepas. de acordo com os resultados, em média, houve presença de espetos em 21,9% das cepas, de rachaduras em 17,2%, de cepas fora do padrão em 44,6% e de cepas sem entalhe direcional em 34,5% das avaliações. Para verificar a influência da realização do entalhe direcional na altura das cepas, o teste-t, a 5% de probabilidade demonstrou que há contribuição para ocorrer maior altura de cepas, nos casos em que o corte foi feito sem o entalhe direcional. A quantidade de madeira retida nas cepas, acima do máximo recomendado, foi, em média, de 2,43 m³/ha, representando um prejuízo de R$ 172,53/ha. Foi verificada que a perda de madeira remanescente nas cepas de eucalipto foi maior nos locais onde, para a derrubada das árvores, não houve a realização do entalhe direcional. Os itens avaliados demonstraram qualidade irregular, indicando a necessidade de melhoria no corte com motosserras.

Adhesives with different pHs: Effect on the MTBS of chemically activated and light-activated composites to human dentin

Purpose: To evaluate the bond strength between human dentin and composites, using two light-activated single-bottle total-etch adhesive systems with different pHs combined with chemically activated and light-activated-composites. The tested hypothesis was that the dentin bond strength is not influenced by an adhesive system of low pH, combined with chemically activated or light-activated composites. Material and Method: Flat dentin surfaces of twenty-eight human third molars were allocated in 4 groups (n=7), depending on the adhesive system: (One Step Plus-OS and Prime & Bond NT-PB) and composite (light-activated Filtek Z-100 [Z100] and chemically activated Bisfil 2B [B2B]). Each adhesive system was applied on acid-etched dentin and then one of the composites was added to form a 5 mm-high resin block. The specimens were stored in tap water (37 degrees C/24 h) and sectioned into two axes, x and y. This was done with a diamond disk under coolant irrigation to obtain beams with a cross-section area of approximately 0.8 mm(2). Each specimen was then attached to a custom-made device and submitted to the microtensile test (1 mm.min(-1)). Data were analyzed using two-way ANOVA and Tukey's tests (p<0.05). Results: the anticipated hypothesis was not confirmed (p<0.0001). The bond strengths (MPa) were not statistically different between the two adhesive systems when light-activated composite was used (OS+Z100 = 24.7 +/- 7.1(a); PB+Z100 = 23.8 +/- 5.7(a)). However, with use of the chemically activated composite (B2B), PB (7.8 +/- 3.6(b) MPa) showed significantly lower dentin bond strengths than OS (32.2 +/- 7.6(a)). Conclusion: the low pH of the adhesive system can affect the bond of chemically activated composite to dentin. on the other hand, under the present conditions, the low pH did not seem to affect the bond of light-activated composites to dentin significantly.

Trilled sounds in Brazilian Portuguese: Phonetic and phonological characterization

This paper deals with the phonological definition of trills in Brazilian Portuguese. The phonemic existence of two distinctive R's, one soft the other strong, is taken for granted. After reviewing the ideas of some Portuguese-speaking phoneticians on this matter, 146 occurrences of R's - recorded by two informants - were acoustically analyzed, the formants' general aspect and the length of the R segments were studied in the resulting spectrograms. The phonological table displayed in the conclusion does not include any trill. The soft phoneme /r/, instead, is classified as an interrupted apico-alveolar tap with a retroflex allophone. Naturalization between these two units is discarded.t

Toxic effects of alcohol intake on prostate of rats

BACKGROUND. The present report was carried out to determine whether alcohol intake could induce prostate lesions.METHODS. We tested male rats for 300 days. Animals were divided into three groups: controls received only tap water as liquid diet; the chronic alcohol intake group received only ethanol solution in semivoluntary research; and the withdrawal group received the same treatment as chronic alcohol intake until 240 days, after which they reverted to drinking water.RESULTS. Chronic alcohol intake increased lipoperoxide concentrations and acid phosphatase activities. Cu-Zn superoxide dismutase (SOD) was decreased at 60 days, but approached controls values at 300 days following treatment. The serum increased alkaline phosphatase, and alanine transaminase activities reflected the chronic toxic effect of ethanol.CONCLUSIONS. Since SOD activity was unable to scavenge superoxide radical and lipoperoxide formation, we can conclude that superoxide is an important intermediate in prostate damage of chronic alcohol intake. (C) 1997 Wiley-Liss, Inc.

Evaluation of Ir, Ru, and W as permanent modifiers for the simultaneous determination of As, Bi, Pb, Sb, and Se in natural water by electrothermal atomic absorption spectrometry

Iridium-, Ru-, and W-coated platforms were prepared by thermal treatment of the transversely heated graphite atomizer and investigated for the simultaneous determination of As, Bi, Pb, Sb, and Se in tap water by electrothermal atomic absorption spectrometry. The maximum pyrolysis temperature for As and Bi increased in a modifier sequence W < Ru < Ir. For Pb, Sb, and Se, this sequence was W < Ru, It. Calculated characteristic masses in the presence of It, Ru, and W were 35, 33, and 35 pg for As; 63, 51, and 52 pg for Bi; 50, 32, and 34 pg for Pb; 40, 35, and 31 pg for Sb; and 39, 39, and 93 pg for Se, respectively. Ruthenium was elected as the optimum modifier.Repeatability of the measurements was typically < 6%. Recoveries of As, Bi, Pb, Sb, and Se added to tap water samples varied from 79 to 109%. Accuracy was also checked by analysis of five certified reference materials (CRMs) from the National Institute of Standards and Technology (NIST1640 - Trace Elements in Natural Water; NIST 1643d Trace Elements in Water) and High Purity Standards (Trace Metals in Drinking Water Standards, lots #812708, #591107, and #710710). A paired t-test showed that the results for the CRMs were in agreement at the 95% confidence level with the certified values. The graphite tube lifetime was about 650 firings. multi-element determination is particularly challenging due to the necessity of carefully optimizing compromise conditions.Based on the considerations listed above, the aim of this paper was to evaluate the behavior of Ir, Ru, and W as permanent modifiers for the simultaneous determination of As, Bi, Pb, Sb, and Se. The performance of the proposed procedure was also verified after the ETAAS analysis of tap waters and reference materials.

Electrochemical reduction and determination of Cibacron Blue F3GA at poly-L-lysine modified glassy carbon electrode

The oxidation of a reactive dye, Cibacron Blue F3GA, CB, (C.I. 61211), widely used in the textile industries to color natural fibers, was studied by electrochemical techniques. The oxidation on glassy carbon electrode occurs in two steps at 2.0 < pH < 10 involving one electron transfer each to the amine group leading to the imide derivative. Stable films of poly-L-lysine (PLL) in the presence of glutaraldehyde (GA) 97.5%:2.5% on glassy carbon electrode can be used to detect low levels of dye using its oxidation peak at +0.75V by voltammetry. Linear calibration graphs were obtained for the CB reactive dye, from 1.0 X 10(-6) to 1.0 X 10(-5) mol L-1 in B-R buffer, pH 2.0, using a pre-concentration off-line during 10 min. The detection limit (3 sigma/slope) was calculated to be 4.5 X 10(-8) mol L-1. Films of PLL can readily be applied for the determination of CB dye bearing aminoanthraquinone as chromophore and chlorotriazinyl as reactive group at concentrations at least 100 times lesser than using a glassy carbon electrode without modification. The method described was applied for the determination of CB dye in tap water and raw water collected from the municipal treatment plant with a recovery of 89.2% +/- 5.4 and 88.0% +/- 6.5, respectively. (c) 2005 Elsevier Ltd. All rights reserved.

Experimental alcoholism and pathogenesis of prostatic diseases in UChB rats

Previous studies have shown that long-term alcohol treatment has negative effects on prostatic stromal-epithelial interaction. Thus, the aim of the present study was to analyze the histochemical, immunohistochemical and ultrastructural alterations that occur in the prostatic stroma and epithelium of rats submitted to chronic alcohol ingestion and alcohol abstinence, as well as to establish the relationship between these changes and prostatic diseases. Thirty male rats (10 Wistar and 20 UChB rats) were divided into three experimental groups: the control group received tap water, the alcoholic group received ethanol diluted to 10 degrees G.L. for 150 days, and the abstinent group received the same liquid diet as the alcoholic group up to 120 days of treatment and only tap water for 30 days thereafter. At the end of treatment, all animals were sacrificed and the ventral lobe of the prostate was removed and processed for histochemical, immunohistochemical and ultrastructural analyses. In addition, plasma testosterone levels were measured. The results showed, prostatic intraepithelial neoplasia, infolding of the epithelium towards the stroma, stromal hypertrophy and the presence of inflammatory cells in alcoholic animals. In the abstinent group, alterations were noted mainly in the stromal area. In conclusion, ethanol triggers alterations in prostatic epithelial and stromal compartments, affecting the stromal microenvironment and predisposing the organ to pathological processes. (C) 2006 International Federation for Cell Biology. Published by Elsevier Ltd. All rights reserved.

Compact disks, a new source for gold electrodes. Application to the quantification of copper by PSA

In this work we describe a versatile and very sensitive way for copper quantification by potentiometric stripping analysis using gold electrodes obtained from recordable compact disks (CDs). This new source of electrodes (CDtrodes) shown similar performance to the commercial gold electrodes with superior versatility and lower cost. Recordable CDs contains a highly pure gold film with thickness between 50 and 100 nm and superficial area of ca. 100 cm(2). The working electrode developed was used successfully in stationary cell and many experimental parameters have been optimized. For copper, the detection limit attained was 30 ng L-1 (600 s deposition time) with remarkable precision (standard deviation of 1.8 % for 20 repetitive measurements using 25 mu gL(-1) of copper with 60 s of deposition time). The gold electrode developed was used for analysis of copper in sugar cane spirits and tap water samples. The results were compared with those obtained by atomic absorption spectroscopy.

Primal-dual logarithmic barrier and augmented Lagrangian function to the loss minimization in power systems

This article presents a new approach to minimize the losses in electrical power systems. This approach considers the application of the primal-dual logarithmic barrier method to voltage magnitude and tap-changing transformer variables, and the other inequality constraints are treated by augmented Lagrangian method. The Lagrangian function aggregates all the constraints. The first-order necessary conditions are reached by Newton's method, and by updating the dual variables and penalty factors. Test results are presented to show the good performance of this approach.

Doxorubicin as an antioxidant: Maintenance of myocardial levels of lycopene under doxorubicin treatment

The mechanism of doxorubicin-induced cardiotoxicity remains controversial. Wistar rats (n=96) were randomly assigned to a control (C), lycopene (L), doxorubicin (D), or doxorubicin+lycopene (DL) group. The L and DL groups received lycopene (5 mg/kg body wt/day by gavage) for 7 weeks. The D and DL groups received doxombicin (4 mg/kg body wt intraperitoneally) at 3, 4, 5, and 6 weeks and were killed at 7 weeks for analyses. Myocardial tissue lycopene levels and total antioxidant performance (TAP) were analyzed by HPLC and fluorometry, respectively. Lycopene metabolism was determined by incubating H-2(10)-lycopene with intestinal mucosa postmitochondrial fraction and lipoxygenase and analyzed with HPLC and APCI mass spectroscopy. Myocardial tissue lycopene levels in DL and L were similar. TAP adjusted for tissue protein were higher in myocardium of D than those of C (P=0.002). Lycopene metabolism study identified a lower oxidative cleavage of lycopene in D as compared to those of C. Our results showed that lycopene was not depleted in myocardium of lycopene-supplemented rats treated with doxorubicin and that higher antioxidant capacity in myocardium and less oxidative cleavage of lycopene in intestinal mucosa of doxorubicin-treated rats suggest an antioxidant role of doxombicin rather than acting as a prooxidant. (c) 2007 Elsevier B.V. All rights reserved.