Synthesis of Traffic Calming Techniques in Work Zones, 2009

Nationwide, over 1,000 fatalities and 40,000 injuries occur annually in work zones, which include both construction zones and areas where maintenance is performed. The majority (85%) of work zone accidents result from unsafe driver behavior, and vehicle speed is often a factor in work zone crashes. In order to address speed and driver behavior near work zones, roadway agencies have developed different traffic calming measures. The objective of this research is to summarize the effectiveness of different traffic calming treatments for reducing speeds in work zones. This project 1. identified work zone traffic calming treatments for which information has not been well summarized, 2. identified state of the art and new technologies for work zone traffic calming, and 3. synthesized research related to items 1 and 2

Mesozoic oceanic terranes of southern Central America : geology, geochemistry and gedynamics

Abstract The Northwestern edge of the modern Caribbean Plate, located in central Middle America (S-Guatemala to N-Costa Rica), is characterized by a puzzle of oceanic and continental terranes that belonged originally to the Pacific façade of North America. South of the Motagua Fault Zone, the actual northern strike slip boundary of the Caribbean Plate, three continental slivers (Copán, Chortis s. str. and Patuca) are sandwiched between two complex suture zones that contain HP/LT mafic and ultramafic oceanic rocks: The Motagua Mélanges to the North, extensively studied in the last ten years and the' newly defined Mesquito Composite Oceanic Terrane (MCOT) to the South. No modem geological data were available for the oceanic terrane located in the southern part of the so called continental "Chortis Block". Classically, the southern limit of this block with the Caribbean Large Igneous Province (CLIP) was placed at a hypothetical fault line connecting the main E-W fault in the Santa Elena Peninsula (N-Costa Rica) with the Hess Escarpment. However, our study in eastern Nicaragua and northwestern Costa Rica evidences an extensive assemblage of oceanic upper mantle and crustal rocks outcropping between the Chortis/Patuca continental blocks and the CLIP. They comprise collided and accreted exotic terranes of Pacific origin recording a polyphased tectonic history. We distinguish: 1- The MCOT that comprises a Late Triassic to Early Cretaceous puzzle of oceanic crust and arc-derived rocks set in a serpentinite matrix, and 2- The Manzanillo and Nicoya Terranes that are made of Cretaceous plateau-like rocks associated with oceanic sediments older than the CLIP. This study has been focused on the rocks of the MCOT. The MCOT comprises the southern half of the former "Chortis Block" and is defined by 4 comer localities characterized by ultramafic and mafic oceanic rocks of Late Triassic, Jurassic and Early Cretaceous age: 1- The Siuna Serpentinite Mélange (NE-Nicaragua), 2- The El Castillo Mélange (Nicaragua/Costa Rica border), 3- DSDP Legs 67 and 84 (Guatemala fore-arc basin), and 4- The Santa Elena Peridiotite (NW-Costa Rica). The Siuna Serpentinite Mélange (SSM) is a HP/LT subduction zone mélange set in a serpentinite matrix that contains oceanic crust and arc-related greenschist to blueschist/eclogite facies metamafic and metasedimentary blocks. Middle Jurassic (Bajocian-Bathonian) radiolarites are found in original sedimentary contact with arc-derived greenstones. Late Jurassic black detrital chert possibly formed in a marginal (fore-arc?) basin shortly before subduction. A phengite 40Ar/39Ar -cooling age dates the exhumation of the high pressure rocks as 139 Ma. The El Castillo Mélange (ECM) is composed of serpentinite matrix with OIB metabasalts and Late Triassic (Rhaetian) red and green radiolarite blocks. Recent studies of the DSDP Legs 67/84 show that the Guatemala/Nicaragua fore-arc basin is composed of a pile of ultramafic, mafic (OIB-like) and arc related rocks with ages ranging from Late Triassic to Campanian. Finally, the Santa Elena peridiotites that mark the limit of the MCOT with the Manzanillo/Nicoya Terranes and correspond to an association of ultramafic rocks that comprise peridiotites, dunites and chromites of abyssal and fore-arc origin. The SSM is the result of a collision between a Middle Jurassic island arc and the Patuca Terrane, a fragment of the Western N-American active continental margin. The Siuna Mélange (SSM) and the South Montagna Mélange share common characteristics with the Pacific N-American suture zone (E-Franciscan and Vizcaino mélanges), in particular, the Mesozoic ages of HP/LT metamorphic and the arc-derived blocks. For us, these mélanges imply an originally continuous, but slightly diachronous suture that affected the entire W-American active margin. It may imply the arrival and collision of an exotic intraoceanic arc (Guerrero-Phoenix) related to the origin of the Pacific Plate that initiated as a back arc basin of this arc. The present disposition of the fragments of this suture zone is the result of a northward shift of the active left-lateral strike slip motion between the N-American and the Caribbean Plates. Résumé Le coin nord-ouest de la Plaque Caraïbe moderne se trouve en Amérique Centrale, entre le sud du Guatemala et le nord du Costa Rica. Cette région est composée d'un puzzle de terrains océaniques et continentaux dont les origines se situent sur la façade pacifique de l'Amérique du Nord. Au sud de la faille de Motagua, la limite septentrionale actuelle, décrochante, de la Plaque Caraïbe, se trouvent 3 copeaux continentaux (Copàn, Chortis s. str. et Patuca) coincés entre deux zones de suture complexes à roches mafiques et ultramafiques qui ont subi un métamorphisme de haute pression/basse température (HP/LT). Il s'agit des Mélanges de Motagua au nord, largement étudiés ces dernières années, et du Mesquito Composite Oceanic Terrane (MCOT), récemment défini par nous, au sud. En vue de l'absence de données géologiques modernes concernant les terrains océaniques qui se trouvent dans la partie sud du "Chortis Block" considérée comme continentale, nous avons dédié cette étude à cette région. Classiquement, la limite méridionale entre le "Chortis Block" et la "Caribbean Large Igneous Province" (CLIP) a été associée à une faille hypothétique reliant la faille E-W de Santa Elena (nord du Costa Rica) à l'Escarpement de Hess. Notre étude au Nicaragua oriental et au Costa Rica nord-occidental a révélé l'existence de larges terrains composés d'assemblages de roches mantéliques et océaniques qui se placent entre les blocs continentaux Chortis/Patuca et le CLIP. Ces assemblages révèlent des terrains collisionnés et accrétés d'origine pacifique enregistrant une histoire tectonique polyphasée. Nous distinguons: 1- Le MCOT, un puzzle de roches océaniques d'arc d'âge Triassique supérieur au Crétacée inférieur, 2- Les terrains de Manzanillo et de Nicoya, des morceaux de plateaux océaniques associés à des sédiments océaniques plus âgés que le CLIP. Cette étude se focalisera sur les roches du MCOT. Le MCOT occupe la moitié sud de l'ancien "Chortis Block" et peut se définir par 4 localités de référence qui montrent des roches mafiques et ultramafiques océaniques d'âges compris entre le Trias supérieur et le Crétacée inférieur. 1- Le Siuna Serpentinite Mélange (NE-Nicaragua), 2- Le El Castillo Mélange (Nicaragua/Costa Rica border), 3- Le DSDP Legs 67/84 (Guatemala fore-arc basin) et 4- La Santa Elena Peridiotite (nord-ouest du Costa Rica). Le Siuna Serpentinite Mélange (SSM) est un mélange de subduction HP/BT dans une matrice de serpentinite. On y trouve des éléments de croûte océanique et d'arc insulaire en faciès de schistes verts et schistes bleus. Des radiolarites du Jurassique moyen se trouvent en contact sédimentaire sur des roches vertes d'arc. En revanche, des cherts noirs détritiques datent du Jurassique supérieur et sont probablement issus d'un bassin marginal (fore-arc ?) peu avant leur subduction, car un âge 40Ar/39Ar de refroidissement des phengites date l'exhumation des roches de haute pression à 139 Ma. Le Mélange d'El Castillo (ECM) est constitué d'une matrice serpentinitique et contient des blocs de metabasaltes OIB et des blocs de radiolarites du Trias terminal. Des études récentes ont repris les roches forées lors des DSDP Legs 67 et 84 et montrent que le soubassement du bassin d'avant-arc du Guatemala-Nicaragua est composé de roches ultramafiques et mafiques (OIB et arc), dont les âges isotopiques vont du Trias au Crétacé supérieur. Finalement, les péridiotites de Santa Elena forment la limite sud du MCOT par rapport aux terrains de Manzanillo et Nicoya. Elles contiennent des serpentinites et localement des dunites et chromites à affinité abyssale et de fore-arc. Le SSM témoigne d'une collision entre un arc insulaire d'âge Jurassique moyen et le Patuca Terrane, un fragment de la marge active nord-américaine. Le SSM et le South Motagua Mélange ont des caractéristiques en commun avec les zones de suture de la façade pacifique de l'Amérique du nord (E-Franciscan et Vizcaino mélanges), notamment les âges Mésozoïques du métamorphisme HP/BT et les blocs de roches d'arc. Ce fait nous conduit à penser qu'il s'agit d'une grande zone de suture qui était à l'origine continue sur toute la marge ouest-américaine, mais légèrement diachrone. Cette suture implique l'arrivée et la collision d'un arc intraocéanique exotique (Guerrero-Phoenix) qui est à l'origine de la Plaque Pacifique qui s'ouvrait en back arc par rapport à celui-ci. La disposition actuelle des fragments de cette suture est due à la migration vers le nord du décrochement actif senestre entre la Plaque nord-américaine et la Plaque Caraïbe. K. Flores, 2009 Mesozoic oceanic terranes of southern central America Résumé Grand Public La présente thèse est le résultat de travaux de terrain effectués de 2005 à 2008 au nord-est et au sud du Nicaragua et au nord du Costa Rica, en Amérique Centrale, des analyses pétrologiques et géochimiques en laboratoire ainsi que de la modélisation de l'évolution géodynamique. La région étudiée se situe en bordure nord - ouest de la Plaque Caraïbe moderne. Dans la majorité des publications récentes cette région est représentée comme un vaste bloc continental (le "Bloc Chortis") qui serait limité, (i) au nord, par la faille décrochante de Motagua, la limite actuelle entre la Plaque Nord-Américaine et la Plaque Caraïbe, et (ii) au sud, par une suture hypothétique qui se trouverait aux confins entre le Nicaragua et le Costa Rica. La région du Costa Rica a été considérée presque entièrement comme une partie du Plateau Caraïbe ("Caribbean Large Igneous Province" (CLIP)). L'étude détaillée des affleurements nous a permis de mettre en évidence : - Au nord-est du Nicaragua (Siuna) : Des roches océaniques datées du Jurassique moyen, grâce aux faunes à radiolaires qui ont été extraites des radiolarites rouges. Ces roches ont subi un métamorphisme de haute pression typique des zones de collision. L'étude radio-isotopique Ar/Ar a permis de dater la collision du Crétacé basal (139 Ma). - Au sud du Nicaragua : Des roches océaniques d'âge Trias terminal (200 millions d'années), également datées à l'aide de faunes à radiolaires. Il s'agit actuellement des roches océaniques les plus anciennes connues de l'Amérique Centrale. - L'étude géochimique et les âges des fossiles démontrent que le tiers septentrional du Costa Rica possède un soubassement construit d'au moins deux terrains (Nicoya et Manzanillo), qui ont des caractéristiques de Plateau océanique (Nicoya) et d'arc volcanique du Crétacé moyen (Manzanillo). Ces deux terrains sont plus anciens que le CLIP. En conclusion, nous constatons que la région étudiée est constituée d'un puzzle de 3 blocs continentaux et d'un vaste terrain océanique composite que nous appelons Mesquito Composite Oceanic Terrane (MCOT). En plus, nous définissons les terrains de Nicoya et de Manzanillo comme plus âgés et distincts du CLIP. Le MCOT est caractérisé par la présence de roches du manteau supérieur (les serpentinites) et de la croûte océanique, ainsi que des morceaux d'arcs, d'âge allant du Trias supérieur au Crétacé. Ce terrain est comparable à d'autres zones de suture de la façade pacifique de l'Amérique du nord, notamment en ce qui concerne les âges Mésozoïques, le métamorphisme de haute pression et l'association de roches mantéliques et crustales océaniques. Ce fait nous conduit à penser qu'il s'agit d'une grande zone de suture qui était à l'origine continue sur toute la marge ouest-américaine. Cette suture implique l'arrivée et la collision d'un arc infra-océanique exotique qui serait à l'origine de la Plaque Pacifique qui se serait ouverte en bassin d'arrière arc par rapport à celui-ci. La disposition actuelle des fragments de cette suture est due à la migration vers le nord du décrochement actif senestre entre la Plaque nord-américaine et la Plaque Caraïbe.

Subduction of continental crust in the Western Alps

As a result of recent deep reflection and refraction seismology the crustal structure of the Western Alps is now quite well-defined. However, this raises the question of what is present below the Moho, such as a crustal eclogitic root. This study attempts to estimate the volume of this eclogitic root on the basis of palinspastic reconstructions. Even with a minimum estimate of the crustal material involved in the subduction processes which took place during the Alpine orogeny, a significant eclogitized crustal root must be present down to depths of around 100 km below the Po plain. A maximum estimate suggests that a large part of this root could now be recycled in the asthenosphere.

Estimating gene flow across hybrid zones: how reliable are microsatellites?

Due to their high polymorphism, microsatellites have become one of the most valued genetic markers in population biology. We review the first two published studies on hybrid zones of the common shrew based on microsatellites. Both reveal surprisingly high interracial gene flow. It can be shown that these are overestimates. Indeed, in classical population genetics models as F-statistics, mutation is neglected. This constitutes an acceptable assumption as long as migration is higher than mutation. However, in hybrid zones where genetic exchanges can be rare, neglecting mutation will lead to strong overestimates of migration when working with microsatellites which display mutation rates up to 10(-3). As there seems to be no straightforward way to correct for this bias, interracial gene flow estimates based on microsatellites should be taken with caution. This problem should however not conceal the enormous potential of microsatellites to unravel the genetics of hybrid zones.

Capacity of riparian buffer zones to reduce sediment concentrations in discharge from peatlands drained for forestry

Abstract

Traffic Control in Work Zones with Edge Drop-Offs, 2002

Pavement and shoulder edge drop-offs commonly occur in work zones as the result of overlays, pavement replacement, or shoulder construction. The depth of these elevation differentials can vary from approximately one inch when a flexible pavement overlay is applied to several feet where major reconstruction is undertaken. The potential hazards associated with pavement edge differentials depend on several factors including depth of the drop-off, shape of the pavement edge, distance from traveled way, vehicle speed, traffic mix, volume, and other factors. This research was undertaken to review current practices in other states for temporary traffic control strategies addressing lane edge differentials and to analyze crash data and resultant litigation related to edge drop-offs. An objective was to identify cost-effective practices that would minimize the potential for and impacts of edge drop crashes in work zones. Considerable variation in addressing temporary traffic control in work zones with edge drop-off exposure was found among the states surveyed. Crashes related to pavement edge drop-offs in work zones do not commonly occur in the state of Iowa, but some have resulted in significant tort claims and settlements. The use of benefit/cost analysis may provide guidance in selection of an appropriate mitigation and protection of edge drop-off conditions. Development and adoption of guidelines for design of appropriate traffic control for work zones that include edge drop-off exposure, particularly identifying effective use of temporary barrier rail, may be beneficial in Iowa.

Maintenance of Traffic for Innovative Geometric Design Work Zones, 2015

Currently there are no guidelines within the Manual on Uniform Traffic Control Devices (MUTCD) on construction phasing and maintenance of traffic (MOT) for retrofit construction and maintenance projects involving innovative geometric designs. The research presented in this report addressed this gap in existing knowledge by investigating the state of the practice of construction phasing and MOT for several types of innovative geometric designs including the roundabout, single point urban interchange (SPUI), diverging diamond interchange (DDI), restricted-crossing left turn (RCUT), median U-turn (MUT), and displaced left turn (DLT). This report provides guidelines for transportation practitioners in developing construction phasing and MOT plans for innovative geometric designs. This report includes MOT Phasing Diagrams to assist in the development of MOT strategies for innovative designs. The MOT Phasing Diagrams were developed through a review of literature, survey, interviews with practitioners, and review of plans from innovative geometric design projects. These diagrams are provided as a tool to assist in improving work zone safety and mobility through construction of projects with innovative geometric designs. The aforementioned synthesis of existing knowledge documented existing practices for these types of designs.

Traffic Management Strategies for Merge Area in Rural Interstate Work Zones, CTRE 97-12, 1999

The Iowa Department of Transportation, like many other state transportation agencies, is experiencing growing congestion and traffic delays in work zones on rural interstate highways. The congestion results in unproductive and wasteful delays for both motorists and commercial vehicles. It also results in hazardous conditions where vehicle stopped in queues on rural interstate highways are being approached by vehicles upstream at very high speeds. The delays also result in driver frustration, making some drivers willing to take unsafe risks in an effort to bypass delays. To reduce the safety hazards and unproductive delays of congested rural interstate work zones, the Iowa Department of Transportation would like to improve its traffic management strategies at these locations. Applying better management practices requires knowledge of the traffic flow properties and driver behavior in and around work zones, and knowledge of possible management strategies. The project reported here and in a companion report documents research which seeks to better understand traffic flow behavior at rural interstate highway work zones and to estimate the traffic carrying capacity of work zone lane closures. In addition, this document also reports on technology available to better manage traffic in and around work zones.

Construction mechanisms and thermal evolution of upper crustal intrusions : the Saint-Jean-du-Doigt bimodal intrusion (Brittany, France)

Understanding the emplacement and growth of intrusive bodies in terms of mechanism, duration, ther¬mal evolution and rates are fundamental aspects of crustal evolution. Recent studies show that many plutons grow in several Ma by in situ accretion of discrete magma pulses, which constitute small-scale magmatic reservoirs. The residence time of magmas, and hence their capacities to interact and differentiate, are con¬trolled by the local thermal environment. The latter is highly dependant on 1) the emplacement depth, 2) the magmas and country rock composition, 3) the country rock thermal conductivity, 4) the rate of magma injection and 5) the geometry of the intrusion. In shallow level plutons, where magmas solidify quickly, evi¬dence for magma mixing and/or differentiation processes is considered by many authors to be inherited from deeper levels. This work shows however that in-situ differentiation and magma interactions occurred within basaltic and felsic sills at shallow depth (0.3 GPa) in the St-Jean-du-Doigt (SJDD) bimodal intrusion, France. This intrusion emplaced ca. 347 Ma ago (IDTIMS U/Pb on zircon) in the Precambrian crust of the Armori- can massif and preserves remarkable sill-like emplacement processes of bimodal mafic-felsic magmas. Field evidence coupled to high precision zircon U-Pb dating document progressive thermal maturation within the incrementally built ioppolith. Early m-thick mafic sills (eastern part) form the roof of the intrusion and are homogeneous and fine-grained with planar contacts with neighboring felsic sills; within a minimal 0.8 Ma time span, the system gets warmer (western part). Sills are emplaced by under-accretion under the old east¬ern part, interact and mingle. A striking feature of this younger, warmer part is in-situ differentiation of the mafic sills in the top 40 cm of the layer, which suggests liquids survival in the shallow crust. Rheological and thermal models were performed in order to determine the parameters required to allow this observed in- situ differentiation-accumulation processes. Strong constraints such as total emplacement durations (ca. 0.8 Ma, TIMS date) and pluton thickness (1.5 Km, gravity model) allow a quantitative estimation of the various parameters required (injection rates, incubation time,...). The results show that in-situ differentiation may be achieved in less than 10 years at such shallow depth, provided that: (1) The differentiating sills are injected beneath consolidated, yet still warm basalt sills, which act as low conductive insulating screens (eastern part formation in the SJDD intrusion). The latter are emplaced in a very short time (800 years) at high injection rate (0.5 m/y) in order to create a "hot zone" in the shallow crust (incubation time). This implies that nearly 1/3 of the pluton (400m) is emplaced by a subsequent and sustained magmatic activity occurring on a short time scale at the very beginning of the system. (2) Once incubation time is achieved, the calculations show that a small hot zone is created at the base of the sill pile, where new injections stay above their solidus T°C and may interact and differentiate. Extraction of differentiated residual liquids might eventually take place and mix with newly injected magma as documented in active syn-emplacement shear-zones within the "warm" part of the pluton. (3) Finally, the model show that in order to maintain a permanent hot zone at shallow level, injection rate must be of 0.03 m/y with injection of 5m thick basaltic sills eveiy 130yr, imply¬ing formation of a 15 km thick pluton. As this thickness is in contradiction with the one calculated for SJDD (1.5 Km) and exceed much the average thickness observed for many shallow level plutons, I infer that there is no permanent hot zone (or magma chambers) at such shallow level. I rather propose formation of small, ephemeral (10-15yr) reservoirs, which represent only small portions of the final size of the pluton. Thermal calculations show that, in the case of SJDD, 5m thick basaltic sills emplaced every 1500 y, allow formation of such ephemeral reservoirs. The latter are formed by several sills, which are in a mushy state and may interact and differentiate during a short time.The mineralogical, chemical and isotopic data presented in this study suggest a signature intermediate be¬tween E-MORB- and arc-like for the SJDD mafic sills and feeder dykes. The mantle source involved produced hydrated magmas and may be astenosphere modified by "arc-type" components, probably related to a sub¬ducting slab. Combined fluid mobile/immobile trace elements and Sr-Nd isotopes suggest that such subduc¬tion components are mainly fluids derived from altered oceanic crust with minor effect from the subducted sediments. Close match between the SJDD compositions and BABB may point to a continental back-arc setting with little crustal contamination. If so, the SjDD intrusion is a major witness of an extensional tectonic regime during the Early-Carboniferous, linked to the subduction of the Rheno-Hercynian Ocean beneath the Variscan terranes. Also of interest is the unusual association of cogenetic (same isotopic compositions) K-feldspar A- type granite and albite-granite. A-type granites may form by magma mixing between the mafic magma and crustal melts. Alternatively, they might derive from the melting of a biotite-bearing quartz-feldspathic crustal protolith triggered by early mafic injections at low crustal levels. Albite-granite may form by plagioclase cu¬mulate remelting issued from A-type magma differentiation.

Logistics Management in China's Development Zones - Finnish Metal Industry Perspective

Alikehittynyt infrastruktuuri, tiukat säädökset ja säädösten tulkitseminen, sekä monimutkaiset verotuskäytännöt ovat aiheuttaneet ongelmia suomalaisille Alikehittynyt infrastruktuuri, tiukat säädökset ja säädösten tulkitseminen, sekä monimutkaiset verotuskäytännöt ovat aiheuttaneet ongelmia suomalaisille yrityksille Kiinassa. Tutkimuksen perusteella yritykset eivät pysty vaikuttamaan infrastruktuurin kehittymiseen tai säädösten implementointiin, mutta ylläpitämällä suhteita ja valitsemalla oikeat partnerit yritykset pystyvät hallitsemaan ongelma-alueitaan. Etenkin ulkomaalaisille yrityksille oikean logistiikkaoperaattorin valinta on tärkeätä ja huomioon ottaen palvelutason, kulttuuritaustan sekä kansainväliset operaatiot on ulkomaalaisten yritysten tehokkaampaa käyttää kansainvälisiä operaattoreita kuin paikallisia toimijoita, jotkaovat usein halvempia, mutta eivät pysty toimimaan kansainvälisellä tasolla. Vientiin keskittyneiden yritysten tulisi sijoittua vapaakauppa-alueille tai vientiin painottuneille teollisuusalueille. Kyseisillä alueilla liiketoiminta mannermaahan on rajoitettu, eivätkä alueet täten sovellu yrityksille, jotka ovat keskittyneet Kiinan markkinoille. Paikallisesti operoivien yritysten tulisi sijoittua normaaleihin teollisuuspuistoihin ja käyttää tullin valvomia varastoja tukemaan kansainvälisiä toimintojaan.Tulisi myös muistaa etteivät kiinalaiset teollisuuspuistot täytä kansainvälisiä kriteerejä, joten säädöksiin on tärkeätä tutustua huolella jamielipiteitä kerätä toisilta yrityksiltä. Kiinassa merkittävimmät logistiikkaongelmat ilmenevät tuonnin ja viennin yhteydessä, jolloin säädökset ja toimintamallit ovat kontrolloidumpia. Etenkin tullaus- ja arvonlisävero ongelmat liittyvät kiinteästi tuonti- ja vientiprosessiin. Tutkimuksen tulokset osoittivat, että tullausprosessi tehostuu yhteistyön ja koulutuksen kautta, mutta arvonlisäverosta aiheutuvien kustannusten minimointi vaatii logistiikkapuistojen käyttöä. Mikäli asiakas haluaa tehdä tullauksen kotiprovinssissaan tai yritys tekee kauppaa ALV -vapautettujen yritysten kanssa, tulisi logistiikkapuistojen käyttöä lisätä. Käytettäessä logistiikkapuistoja yritykset välttävät tuotteiden kuljetukset Hongkongiin jatakaisin säästäen huomattavasti kustannuksissa ja toimitusajoissa. Logistiikkapuistoja on myös mahdollista käyttää ratkaisuna kasvaviin ja viivästyviin ALV palautuksiin. Tutkimuksen tulosten mukaan toimintaympäristö ja vientipainotteinen valmistus ohjaavat 3PL yritysten valintaa ja vaihtoehtoisten logistiikkapalvelujen implementointia. Etabloiduttaessavapaakauppa-alueille vientiin ja tuontiin liittyvät ongelmatekijät vahvistuvat sekä rajoitukset kiinan liiketoimintaan kasvavat, mikä tekee yhteistyönkansainvälisten logistiikkaoperaattoreiden kanssa välttämättömäksi ja kannustaa hyödyntämään logistiikkapuistoja.

Forecasting coal resources and reserves in heterogeneous coal zones using 3D facies models (As Pontes Basin, NW Spain)

Forecasting coal resources and reserves is critical for coal mine development. Thickness maps are commonly used for assessing coal resources and reserves; however they are limited for capturing coal splitting effects in thick and heterogeneous coal zones. As an alternative, three-dimensional geostatistical methods are used to populate facies distributionwithin a densely drilled heterogeneous coal zone in the As Pontes Basin (NWSpain). Coal distribution in this zone is mainly characterized by coal-dominated areas in the central parts of the basin interfingering with terrigenous-dominated alluvial fan zones at the margins. The three-dimensional models obtained are applied to forecast coal resources and reserves. Predictions using subsets of the entire dataset are also generated to understand the performance of methods under limited data constraints. Three-dimensional facies interpolation methods tend to overestimate coal resources and reserves due to interpolation smoothing. Facies simulation methods yield similar resource predictions than conventional thickness map approximations. Reserves predicted by facies simulation methods are mainly influenced by: a) the specific coal proportion threshold used to determine if a block can be recovered or not, and b) the capability of the modelling strategy to reproduce areal trends in coal proportions and splitting between coal-dominated and terrigenousdominated areas of the basin. Reserves predictions differ between the simulation methods, even with dense conditioning datasets. Simulation methods can be ranked according to the correlation of their outputs with predictions from the directly interpolated coal proportion maps: a) with low-density datasets sequential indicator simulation with trends yields the best correlation, b) with high-density datasets sequential indicator simulation with post-processing yields the best correlation, because the areal trends are provided implicitly by the dense conditioning data.

Development of fluid conduits in the auriferous shear zones of the Hutti Gold Mine, India: evidence for spatially and temporally heterogeneous fluid flow

The gold mineralization of the Hutti Mine is hosted by nine parallel, N - S trending, steeply dipping, 2 - 10 m wide shear zones, that transect Archaean amphibolites. The shear zones were formed after peak metamorphism during retrograde ductile D, shearing in the lower amphibolite facies. They were reactivated in the lower to mid greenschist facies by brittle-ductile D-3 shearing and intense quartz veining. The development of a S-2-S-3 crenulation cleavage facilitates the discrimination between the two deformation events and contemporaneous alteration and gold mineralization. Ductile D, shearing is associated with a pervasively developed distal chlorite - sed cite alteration assemblage in the outer parts of the shear zones and the proximal biotite-plagioclase alteration in the center of the shear zones. D3 is characterized by development of the inner chlorite-K-feldspar alteration, which forms a centimeter-scale alteration halo surrounding the laminated quartz veins and replaces earlier biotite along S-3. The average size of the laminated vein systems is 30-50 m along strike as well as down-dip and 2-6 m in width. Mass balance calculations suggest strong metasomatic changes for the proximal biotite-plagioclase alteration yielding mass and volume increase of ca. 16% and 12%, respectively. The calculated mass and volume changes of the distal chlorite-sericite alteration (ca. 11%, ca. 8%) are lower. The decrease in 6180 values of the whole rock from around 7.5 parts per thousand for the host rocks to 6-7 parts per thousand for the distal chlorite-sericite and the proximal biotite-plagioclase alteration and around 5 parts per thousand for the inner chlorite-K-feldspar alteration suggests hydrothermal alteration during two-stage deformation and fluid flow. The ductile D-2 deformation in the lower amphibolite facies has provided grain scale porosities by microfracturing. The pervasive, steady-state fluid flow resulted in a disseminated style of gold-sulfide mineralization and a penetrative alteration of the host rocks. Alternating ductile and brittle D3 deformation during lower to mid greenschist facies conditions followed the fault-valve process. Ductile creep in the shear zones resulted in a low permeability environment leading to fluid pressure build-up. Strongly episodic fluid advection and mass transfer was controlled by repeated seismic fracturing during the formation of laminated quartz(-gold) veins. The limitation of quartz veins to the extent of earlier shear zones indicate the importance of preexisting anisotropies for fault-valve action and economic gold mineralization. (C) 2003 Elsevier B.V. All rights reserved.

Determinació de l’estat de seguretat alimentària de dues zones d’Etiòpia i de les variables socioeconòmiques que les afecten

L’objectiu d’aquest estudi ha sigut generar dades especifiques locals de dos zones agroecològiques diferents d’Etiòpia ( el woreda Wukro i el woreda Abaya), mesurar l’estat de seguretat alimentària de la seva població, i els determinants socioeconòmics que els afecten, així com identificar els principals problemes metodològics, interpretatius que afecten a aquestes mesures i, en conseqüència, les intervencions que se’n poden derivar.