A pilot study of the manual force levels required to produce manipulation induced hypoalgesia

Objective. A pilot investigation of the influence of different force levels on a treatment technique's hypoalgesic effect. Design. Randomised single blind repeated measures. Background. Optimisation of such biomechanical treatment variables as the point of force application, direction of force application and the level of applied manual force is classically regarded as the basis of best practice manipulative therapy. Manipulative therapy is frequently used to alleviate pain, a treatment effect that is often studied directly in the neurophysiological, paradigm and seldom in biomechanical research. The relationship between the level of force applied by a technique (e.g. biomechanics) and its hypoalgesic effect was the focus of this study. Method. The experiment involved the application of a lateral glide mobilisation with movement treatment technique to the symptomatic elbow of six subjects with lateral epicondylalgia. Four different levels of force, which were measured with a flexible pressure-sensing mat, were randomly applied while the subject performed a pain free grip strength test. Results. Standardised manual force data varied from 0.76 to 4.54 N/cm, lower-upper limits 95 Cl, respectively. Pain free grip strength expressed as a percentage change from pre-treatment values was significantly greater with manual forces beyond 1.9 N/cm (P = 0.014). Conclusions. This study, albeit a pilot, provides preliminary evidence that in terms of the hypoalgesic effect of a mobilisation with movement treatment technique, there may be an optimal level of applied manual force.

Experimental study of drop-interface coalescence in the presence of polymer stabilisers

An experimental study has been carried out to characterise the performance of polymer stabilisers, partially hydrolysed polyvinyl acetate (PVAc), used in suspension polymerisation processes. The stabilisers are ranked by their ability to stabilise the dispersion characterised by the median coalescence time of a single drop with its homophase at a planar liquid/liquid interface. Results show that the stability of the dispersion relates closely to the molecular properties of the PVAcs. Other conditions being equal, PVAcs with higher molecular weights or lower degrees of hydrolysis can better stabilise a liquid-liquid dispersion. The stability of the dispersion also depends strongly on where the PVAc resides. The presence of a PVAc in the dispersed phase significantly reduces stability. Consistent with results reported in the literature, considerable scatter has been observed on the coalescence times of identical drops under the same conditions. An explanation for the scatter is also proposed in the paper, based on the classical Reynolds model for film thinning. (C) 2002 Elsevier Science B.V. All rights reserved.

Links between attachment orientations and dispositional and diary-based measures of disclosure in dating couples: A study of actor and partner effects

Issues concerning the influence of attachment characteristics on own and partner's disclosure were addressed using a sample of 113 couples in medium-term dating relationships. Individual differences in attachment were assessed in terms of relationship anxiety and avoidance. Disposition to disclose was assessed using questionnaire measures of self-disclosure, relationship-focused disclosure, and the ability to elicit disclosure from the partner; in addition, structured diaries were used to assess aspects of disclosure (amount, intimacy, emotional tone, and satisfaction) in the context of couples' everyday interactions. Couple-level analyses showed that avoidance strongly predicted dispositional measures of disclosure, whereas anxiety (particularly partner's anxiety) was related to negative evaluations of everyday interactions. Interactive effects of attachment dimensions and gender were also obtained, highlighting the complexity of communication behavior. The results are discussed in terms of the goals and strategies associated with working models of attachment.

Close packed transitions in slit-shaped pores: Density functional theory study of methane adsorption capacity in carbon

An important feature of improving lattice gas models and classical isotherms is the incorporation of a pore size dependent capacity, which has hitherto been overlooked. In this paper, we develop a model for predicting the temperature dependent variation in capacity with pore size. The model is based on the analysis of a lattice gas model using a density functional theory approach at the close packed limit. Fluid-fluid and solid-fluid interactions are modeled by the Lennard-Jones 12-6 potential and Steele's 10-4-3, potential respectively. The capacity of methane in a slit-shaped carbon pore is calculated from the characteristic parameters of the unit cell, which are extracted by minimizing the grand potential of the unit cell. The capacities predicted by the proposed model are in good agreement with those obtained from grand canonical Monte Carlo simulation, for pores that can accommodate up to three adsorbed layers. Single particle and pair distributions exhibit characteristic features that correspond to the sequence of buckling and rhombic transitions that occur as the slit pore width is increased. The model provides a useful tool to model continuous variation in the microstructure of an adsorbed phase, namely buckling and rhombic transitions, with increasing pore width. (C) 2002 American Institute of Physics.

Transport safety for older people: A study of their experiences, perceptions and management needs

With evidence of increasing accident risk due to age-related declines in health and cognition affecting driver performance, there is a need for research promoting safe mobility of older people. The present study aimed to identify transport options and licensing issues for a group of older people in an Australian community. Ninety-five participants aged 75 and over were interviewed about their driving status and accident record and tested for cognitive ability. After stratification on cognitive level and driver status (current, ex-driver or non-driver), 30 were selected for further in-depth interviews concerning demographics, licence status and impact of change, travel options available and used, and travel characteristics. Considerable reliance on the motor vehicle as the mode of transport and the decision to cease driving were major quality-of-life issues. There was little evidence of planning and support in making the decision to stop driving. Some differences in transport decisions on the basis of cognitive level were evident; however, people with severely compromised cognitive ability (and, therefore, unable to give informed consent) had been excluded. The study suggested the need for resources to assist older people/carers/health professionals to plan for the transition from driver to non-driver and to manage alternative transport options more effectively

What We Don't Know Could Hurt Us: A Single Center Study of Batch-to-Batch Variability of Dietary Fluids and Matched Videofluoroscopy Fluids

This study examines batch-to-batch variability in the production of dietary fluids and videofluoroscopy fluids of a single hospital. The material properties, such as viscosity, yield stress, and density, show significant variations between batches. Also waterbased products (i.e., cordial) provide (a) the most stability from week to week for both dietary and videofluoroscopy fluids and (b) the best dietary and videofluoroscopy fluid matches. The study also highlights the need for further research into how base substances, such as water, juice, and dairy products, react with different thickeners and with barium.

MR image-based measurement of rates of change in volumes of brain structures. Part II: Application to a study of Alzheimer's disease and normal aging

We present global and regional rates of brain atrophy measured on serially acquired T1-weighted brain MR images for a group of Alzheimer's disease (AD) patients and age-matched normal control (NC) subjects using the analysis procedure described in Part I. Three rates of brain atrophy: the rate of atrophy in the cerebrum, the rate of lateral ventricular enlargement and the rate of atrophy in the region of temporal lobes, were evaluated for 14 AD patients and 14 age-matched NC subjects. All three rates showed significant differences between the two groups, However, the greatest separation of the two groups was obtained when the regional rates were combined. This application has demonstrated that rates of brain atrophy, especially in specific regions of the brain, based on MR images can provide sensitive measures for evaluating the progression of AD. These measures will be useful for the evaluation of therapeutic effects of novel therapies for AD. (C) 2002 Elsevier Science Inc. All rights reserved.

A comparative study of carbon gasification with O-2 and CO2 by density functional theory calculations

A comparative study of carbon gasification with O-2 and CO2 was conducted by using density functional theory calculations. It was found that the activation energy and the number of active sites in carbon gasification reactions are significantly affected by both the capacity and manner of gas chemisorption. O-2 has a strong adsorption capacity and the dissociative chemisorption of O-2 is thermodynamically favorable on either bare carbon surface or even isolated edge sites. As a result, a large number of semiquinone and o-quinone oxygen can be formed indicating a significant increase in the number of active sites. Moreover, the weaker o-quinone C-C bonds can also drive the reaction forward at (ca. 30%) lower activation energy. Epoxy oxygen forms under relatively high O-2 pressure, and it can only increase the number of active sites, not further reduce the activation energy. CO2 has a lower adsorption capacity. Dissociative chemisorption of CO2 can only occur on two consecutive edge sites and o-quinone oxygen formed from CO2 chemisorption is negligible, let alone epoxy oxygen. Therefore, CO2-carbon reaction needs (ca 30%) higher activation energy. Furthermore, the effective active sites are also reduced by the manner Of CO2 chemisorption. A combination of the higher activation energy and the fewer active sites leads to the much lower reaction rate Of CO2-carbon.

A population-based study of the biochemical and clinical expression of the H63D hemochromatosis mutation

Background & Aims: Two major mutations are defined within the hemochromatosis gene, HFE. Although the effects of the C282Y mutation have been well characterized, the effects of the H63D mutation remain unclear. We accessed a well-defined population in Busselton, Australia, and determined the frequency of the H63D mutation and its influence on total body iron stores. Methods: Serum transferrin saturation and ferritin levels were correlated with the H63D mutation in 2531 unrelated white subjects who did not possess the C282Y mutation. Results: Sixty-two subjects (2.1%) were homozygous for the H63D mutation, 711 (23.6%) were heterozygous, and 1758 (58.4%) were wild-type for the H63D mutation. Serum transferrin saturation was significantly increased in male and female H63D homozygotes and heterozygotes compared with wild-types. Serum ferritin levels within each gender were not influenced by H63D genotypes. Elevated transferrin saturation greater than or equal to45% was observed in a greater proportion of male H63D carriers than male wild-types. Male H63D homozygotes (9%) and heterozygotes (3%) were more likely to have both elevated transferrin saturation and elevated ferritin greater than or equal to300 ng/mL than male wild-types (0.7%). Homozygosity for H63D was not associated with the development of clinically significant iron overload. Conclusions: Presence of the H63D mutation results in a significant increase in serum transferrin saturation but does hot result in significant iron overload. In the absence of the C282Y mutation, the H63D mutation is not clinically significant.

HRTEM study of orthorhombic zirconia in MgO-PSZ

High-resolution transmission electron microscopy (HRTEM) was used to study the phase of orthorhombic ZrO2 formed in magnesia partially stabilized zirconia (MgO-PSZ) during HRTEM specimen preparation. Based on the three reported crystal structures of orthorhombic ZrO2, with the space groups Pbcm, Pbc2(1) and Pbca, here it is shown that orthorhombic ZrO2 formed in MgO-PSZ has the Pbcm structure.