A study of the phosphate mineral kapundaite NaCa(Fe3+)4(PO4)4(OH)3⋅5(H2O) using SEM/EDX and vibrational spectroscopic methods

Vibrational spectroscopy enables subtle details of the molecular structure of kapundaite to be determined. Single crystals of a pure phase from a Brazilian pegmatite were used. Kapundaite is the Fe3+ member of the wardite group. The infrared and Raman spectroscopy were applied to compare the structure of kapundaite with wardite. The Raman spectrum of kapundaite in the 800–1400 cm−1 spectral range shows two intense bands at 1089 and 1114 cm−1 assigned to the ν1PO43- symmetric stretching vibrations. The observation of two bands provides evidence for the non-equivalence of the phosphate units in the kapundaite structure. The infrared spectrum of kapundaite in the 500–1300 cm−1 shows much greater complexity than the Raman spectrum. Strong infrared bands are found at 966, 1003 and 1036 cm−1 and are attributed to the ν1PO43- symmetric stretching mode and ν3PO43- antisymmetric stretching mode. Raman bands in the ν4 out of plane bending modes of the PO43- unit support the concept of non-equivalent phosphate units in the kapundaite structure. In the 2600–3800 cm−1 spectral range, Raman bands for kapundaite are found at 2905, 3151, 3311, 3449 and 3530 cm−1. These bands are broad and are assigned to OH stretching vibrations. Broad infrared bands are also found at 2904, 3105, 3307, 3453 and 3523 cm−1 and are attributed to water. Raman spectroscopy complimented with infrared spectroscopy has enabled aspects of the structure of kapundaite to be ascertained and compared with that of other phosphate minerals.

Bounded rationality and voting decisions over 160 years : voter behavior and increasing complexity in decision-making

Using a quasi-natural voting experiment encompassing a 160-year period (1848–2009) in Switzerland, we investigate whether a higher level of complexity leads to increased reliance on trusted parliamentary representatives. We find that when more referenda are held on the same day, constituents are more likely to refer to parliamentary recommendations when making their decisions. This finding holds true even when we narrow our focus to referenda with a relatively lower voter turnout on days on which more than one referendum is held. We also demonstrate that when constituents face a higher level of complexity, they follow the parliamentary recommendations rather than those of interest groups. "Viewed as a geometric figure, the ant’s path is irregular, complex, hard to describe. But its complexity is really a complexity in the surface of the beach, not a complexity in the ant." ([1] p. 51)

Rice ragged stunt oryzavirus genome segments S7 and S10 encode non-structural proteins of M(r) 68 025 (Pns7) and M(r) 32364 (Pns10) : brief report

The nucleotide sequences of genome segments S7 and S10 of a Thai-isolate of rice ragged stunt virus (RRSV) were determined. The 1938 bp S7 sequence contains a single large open reading frame (ORF) spanning nucleotides 20 to 1 843 that is predicted to encode a protein of M(r) 68 025. The 1 162 bp S10 sequence has a major ORF spanning nucleotides 142 to 1 032 that is predicted to encode a protein of M(r) 32364. This S10 ORF is preceded by a small ORF (nt 20-55) which is probably a minicistron. Coupled in vitro transcription-translation from the two major ORFs gave protein products of the expected sizes. However, no protein was visualised from S10 when the small ORF sequence was included. Proteins were expressed in Escherichia coli from the full length ORF of S7 (P7) and from a segment of the S10 ORF (P10) fused to the ORF of glutathione S-transferase (GST). Neither fusion protein was recognised by polyclonal antibodies raised against RRSV particles. Furthermore, polyclonal antibodies raised against GST-P7 fusion protein did not recognise any virion structural polypeptides. These data strongly suggest that the proteins P7 and P10 do not form part of RRSV particle. This is further supported by observed sequence homology (though very weak) of predicted.

Structural layers of communication on Twitter

Twitter is used for a range of communicative purposes. These extend from personal tweets that address what used to be Twitter’s default question, “What’s happening?”, through one-on-one @reply conversations between close friends and attempts at getting the attention of celebrities and other public actors, to discussions in communities built around specific issues—and back again to broadcast-style statements from well-known individuals and brands to their potentially very large retinue of followers.

A conceptualization of complexity in IS-driven organizational transformations

Organizational transformations reliant on successful ICT system developments (continue to) fail to deliver projected benefits even when contemporary governance models are applied rigorously. Modifications to traditional program, project and systems development management methods have produced little material improvement to successful transformation as they are unable to routinely address the complexity and uncertainty of dynamic alignment of IS investments and innovation. Complexity theory provides insight into why this phenomenon occurs and is used to develop a conceptualization of complexity in IS-driven organizational transformations. This research-in-progress aims to identify complexity formulations relevant to organizational transformation. Political/power based influences, interrelated business rules, socio-technical innovation, impacts on stakeholders and emergent behaviors are commonly considered as characterizing complexity while the proposed conceptualization accommodates these as connectivity, irreducibility, entropy and/or information gain in hierarchically approximation and scaling, number of states in a finite automata and/or dimension of attractor, and information and/or variety.

Modal flexibility method for structural damage detection in suspension bridges

Suspension bridges meet the steadily growing demand for lighter and longer bridges in today’s infrastructure systems. These bridges are designed to have long life spans, but with age, their main cables and hangers could suffer from corrosion and fatigue. There is a need for a simple and reliable procedure to detect and locate such damage, so that appropriate retrofitting can be carried out to prevent bridge failure. Damage in a structure causes changes in its properties (mass, damping and stiffness) which in turn will cause changes in its vibration characteristics (natural frequencies, modal damping and mode shapes). Methods based on modal flexibility, which depends on both the natural frequencies and mode shapes, have the potential for damage detection. They have been applied successfully to beam and plate elements, trusses and simple structures in reinforced concrete and steel. However very limited applications for damage detection in suspension bridges have been identified to date. This paper examines the potential of modal flexibility methods for damage detection and localization of a suspension bridge under different damage scenarios in the main cables and hangers using numerical simulation techniques. Validated finite element model (FEM) of a suspension bridge is used to acquire mass normalized mode shape vectors and natural frequencies at intact and damaged states. Damage scenarios will be simulated in the validated FE models by varying stiffness of the damaged structural members. The capability of damage index based on modal flexibility to detect and locate damage is evaluated. Results confirm that modal flexibility based methods have the ability to successfully identify damage in suspension bridge main cables and hangers.

Performance-based structural fire design of steel frames using conventional computer software

Fire incident in buildings is common, so the fire safety design of the framed structure is imperative, especially for the unprotected or partly protected bare steel frames. However, software for structural fire analysis is not widely available. As a result, the performance-based structural fire design is urged on the basis of using user-friendly and conventional nonlinear computer analysis programs so that engineers do not need to acquire new structural analysis software for structural fire analysis and design. The tool is desired to have the capacity of simulating the different fire scenarios and associated detrimental effects efficiently, which includes second-order P-D and P-d effects and material yielding. Also the nonlinear behaviour of large-scale structure becomes complicated when under fire, and thus its simulation relies on an efficient and effective numerical analysis to cope with intricate nonlinear effects due to fire. To this end, the present fire study utilizes a second order elastic/plastic analysis software NIDA to predict structural behaviour of bare steel framed structures at elevated temperatures. This fire study considers thermal expansion and material degradation due to heating. Degradation of material strength with increasing temperature is included by a set of temperature-stress-strain curves according to BS5950 Part 8 mainly, which implicitly allows for creep deformation. This finite element stiffness formulation of beam-column elements is derived from the fifth-order PEP element which facilitates the computer modeling by one member per element. The Newton-Raphson method is used in the nonlinear solution procedure in order to trace the nonlinear equilibrium path at specified elevated temperatures. Several numerical and experimental verifications of framed structures are presented and compared against solutions in literature. The proposed method permits engineers to adopt the performance-based structural fire analysis and design using typical second-order nonlinear structural analysis software.

Analysis of interrelationships between critical waste factors in office building retrofit projects using interpretive structural modelling

The number of office building retrofit projects is increasing. These projects are characterised by processes which have a close relationship with waste generation and therefore demand a high level of waste management. In a preliminary study reported separately, we identified seven critical factors of on-site waste generation in office building retrofit projects. Through semi-structured interviews and Interpretive Structural Modelling, this research further investigated the interrelationships among these critical waste factors, to identify each factor’s level of influence on waste generation and propose effective solutions for waste minimization. “Organizational commitment” was identified as the fundamental issue for waste generation in the ISM system. Factors related to plan, design and construction processes were found to be located in the middle levels of the ISM model but still had significant impacts on the system as a whole. Based on the interview findings and ISM analysis results, some practical solutions were proposed for waste minimization in building retrofit projects: (1) reusable and adaptable fit-out design; (2) a system for as-built drawings and building information; (3) integrated planning for retrofitting work process and waste management; and (4) waste benchmarking development for retrofit projects. This research will provide a better understanding of waste issues associated with building retrofit projects and facilitate enhanced waste minimization.

Agentive motility meets structural viscosity: Australian families relocating in educational markets

This paper will develop and illustrate a concept of institutional viscosity to balance the more agentive concept of motility with a theoretical account of structural conditions. The argument articulates with two bodies of work: Archer’s (2007, 2012) broad social theory of reflexivity as negotiating agency and social structures; and Urry’s (2007) sociology of mobility and mobility systems. It then illustrates the concept of viscosity as a variable (low to high viscosity) through two empirical studies conducted in the sociology of education that help demonstrate how degrees of viscosity interact with degrees of motility, and how this interaction can impact on motility over time. The first study explored how Australian Defence Force families cope with their children’s disrupted education given frequent forced relocations. The other study explored how middle class professionals relate to career and educational opportunities in rural and remote Queensland. These two life conditions have produced very different institutional practices to make relocations thinkable and doable, by variously constraining or enabling mobility. In turn, the degrees of viscosity mobile individuals meet with over time can erode or elevate their motility.

Prediction of CO concentrations based on a hybrid Partial Least Square and Support Vector Machine model

Due to the health impacts caused by exposures to air pollutants in urban areas, monitoring and forecasting of air quality parameters have become popular as an important topic in atmospheric and environmental research today. The knowledge on the dynamics and complexity of air pollutants behavior has made artificial intelligence models as a useful tool for a more accurate pollutant concentration prediction. This paper focuses on an innovative method of daily air pollution prediction using combination of Support Vector Machine (SVM) as predictor and Partial Least Square (PLS) as a data selection tool based on the measured values of CO concentrations. The CO concentrations of Rey monitoring station in the south of Tehran, from Jan. 2007 to Feb. 2011, have been used to test the effectiveness of this method. The hourly CO concentrations have been predicted using the SVM and the hybrid PLS–SVM models. Similarly, daily CO concentrations have been predicted based on the aforementioned four years measured data. Results demonstrated that both models have good prediction ability; however the hybrid PLS–SVM has better accuracy. In the analysis presented in this paper, statistic estimators including relative mean errors, root mean squared errors and the mean absolute relative error have been employed to compare performances of the models. It has been concluded that the errors decrease after size reduction and coefficients of determination increase from 56 to 81% for SVM model to 65–85% for hybrid PLS–SVM model respectively. Also it was found that the hybrid PLS–SVM model required lower computational time than SVM model as expected, hence supporting the more accurate and faster prediction ability of hybrid PLS–SVM model.

A Bayesian regression approach to assess uncertainty in pollutant wash-off modelling

Due to knowledge gaps in relation to urban stormwater quality processes, an in-depth understanding of model uncertainty can enhance decision making. Uncertainty in stormwater quality models can originate from a range of sources such as the complexity of urban rainfall-runoff-stormwater pollutant processes and the paucity of observed data. Unfortunately, studies relating to epistemic uncertainty, which arises from the simplification of reality are limited and often deemed mostly unquantifiable. This paper presents a statistical modelling framework for ascertaining epistemic uncertainty associated with pollutant wash-off under a regression modelling paradigm using Ordinary Least Squares Regression (OLSR) and Weighted Least Squares Regression (WLSR) methods with a Bayesian/Gibbs sampling statistical approach. The study results confirmed that WLSR assuming probability distributed data provides more realistic uncertainty estimates of the observed and predicted wash-off values compared to OLSR modelling. It was also noted that the Bayesian/Gibbs sampling approach is superior compared to the most commonly adopted classical statistical and deterministic approaches commonly used in water quality modelling. The study outcomes confirmed that the predication error associated with wash-off replication is relatively higher due to limited data availability. The uncertainty analysis also highlighted the variability of the wash-off modelling coefficient k as a function of complex physical processes, which is primarily influenced by surface characteristics and rainfall intensity.

Diporphyrins linked by two-atom bridges synthestic, structural and theoretical studies

The syntheses, properties and electronic structures of a series of porphyrin dimers connected by two-atom bridges were compared. The study found that an azo linker results in the most efficient electronic communication between the two porphyrin rings, and is the superior connector for dimers, trimers and oligomers in the design of nonlinear optical materials. This has implications for the design of molecular probes and sensors, photodynamic therapy, microfabrication, and three-dimensional optical data storage. The research led to the synthesis of a number of new porphyrin monomers and dimers, which were characterised using structural, spectroscopic and spectrometric techniques.

Carbon nanotube composite sensor for structural health monitoring of bridge structures

Bridges are important infrastructures of all nations and are required for transportation of goods as well as human. A catastrophic failure can result in loss of lives and enormous financial hardship to the nation. Although various kinds of sensors are now available to monitor the health of the structures due to corrosion, they do not provide permanent and long term measurements. This paper investigates the fabrication of Carbon Nanotube (CNT) based composite sensors for corrosion detection of structures. Multi-wall CNT (MWCNT)/Nafion composite sensors were fabricated to evaluate their electrical properties for corrosion detection. The test specimens were subjected to real life corrosion experimental tests and the results confirm that the electrical resistance of the sensor electrode was dramatically changed due to corrosion.