Análisis del modelo de Internacionalización de e-Tech Simulation según la teoría de redes

La teoría de redes de Johanson y Mattson (1988) explica como las pequeñas empresas, también conocidas como PyMes, utilizan las redes de negocio para desarrollar sus procesos de internacionalización. Es así que a través de las redes pueden superar sus limitaciones de tamaño para encontrar cierto tipo de fluidez y dinamismo en su gestión, con el fin de aprovechar los beneficios de la internacionalización. A partir del desarrollo y fortalecimiento de las relaciones dentro de la red la organización puede posicionarse en una instancia competitiva cada vez más fuerte (Jarillo, 1988). Según Forsgren y Johanson (1992), para los gerentes es importante coordinar la interacción entre los diferentes actores de la red, ya que a través de estas su posición dentro de la red mejora y así mismo el flujo de recursos será mayor. El propósito de este trabajo es analizar el modelo de internacionalización según la teoría de redes, desde una perspectiva cultural, de e-Tech Simulation una PyME “Born to be global” norteamericana. Esta empresa ha minimizado su riesgo de internacionalización, a través del desarrollo de acuerdos entre los diferentes actores. Al mejorar su posición dentro de la red, es decir al fortalecer aún más los lazos existentes y crear nuevas relaciones, la empresa ha obtenido mayores beneficios de la misma y ha logrado ser aún más flexible con sus clientes. Es por esto que a partir de este análisis se planteó una serie de recomendaciones para mejorar los procesos de negociación dentro de la red, bajo un contexto cultural. De igual forma se evidencio la importancia del papel del emprendimiento del gerente en los procesos de internacionalización, así como su habilidad para mezclar los recursos obtenidos de diferentes mercados internacionales para satisfacer las necesidades de los clientes.

El virus de l'hepatitis C i la ribonucleasa Phumana: aspectes biològics i terapèutics

El virus de l'hepatitis C (VHC) provoca una hepatitis crònica que afecta a més de 170 milions de persones d'arreu del món. És un virus petit que es classifica dins de la família Flaviviridae i és un virus d'RNA de cadena positiva amb un genoma d'aproximadament 9.600 nucleòtids. A l'extrem 5' del genoma viral s'hi troba una regió no codificant (5'NCR) que comprèn els primers 341 nucleòtids i la seva funció està relaciona amb la traducció. Immediatament després hi ha una pauta de lectura oberta ORF que acaba en un únic codó d'aturada i codifica una poliproteïna de 3.010 aminoàcids. A continuació l'extrem 3' no codificant (3'NCR), que malgrat es desconeixen les seves funcions exactes, s'ha demostrat que és essencial per a la replicació vírica. La única poliproteïna generada és processada co- i postraduccionalment mitjançant proteases de l'hoste i víriques, donant lloc a les proteïnes estructurals (Core, E1 i E2-p7) i no estructurals (NS2-NS5B). Igual que la majoria de virus RNA, el VHC es caracteritza per tenir una taxa de mutació elevada. De fet, el genoma del virus no es pot definir com una única seqüència sinó per una població de variants molt relacionades entre sí. A aquesta manera d'organitzar la informació genètica se l'anomena quasiespècie viral i una de les seves implicacions principals és la facilitat amb què sorgeixen resistents al tractament. Els tractaments disponibles són llargs, cars, provoquen efectes secundaris considerables i només es resolen completament el 40% dels casos. Per aquesta raó es busquen altres solucions terapèutiques per combatre el virus entre les quals s'hi inclouen diferents estratègies. Una de les més innovadores i prometedores és la utilització de ribozims dirigits directament contra el genoma del virus. Aquest treball es centra en l'estudi de les noves estratègies terapèutiques basades en ribozims, concretament la ribonucleasa P. La ribonucleasa P és un ribozim que està present en tots els organismes ja que és l'enzim responsable de la maduració dels precursors d'RNA de transferència. El més interessant a nivell terapèutic és que s'ha demostrat que es pot dirigir la seva activitat cap a qualsevol RNA utilitzant una seqüència guia d'RNA que quan hibrida amb l'RNA diana, l'híbrid imita l'estructura secundària del substrat natural. En el cas del VHC, s'han estudiat ribozims dependents de seqüència (ribozims derivats d'RNAs satèl·lits i de viroides de plantes), sempre dirigits contra la regió més conservada del virus per evitar una disminució de l'eficiència del ribozim deguda a la variació de la diana. La ribonucleasa P és una endonucleasa d'activitat molt específica i es diferencia dels altres ribozims naturals en el sistema de reconeixement del substrat, reconeix elements estructurals i no de seqüència. L'objectiu final del treball és tallar in vitro l'RNA del VHC aprofitant la propietat que presenta aquest ribozim de reconèixer elements estructurals i no de seqüència ja que per a un mateix nombre de seqüències, el nombre d'estructures viables que pot adoptar l'RNA genòmic és molt més petit i per tant la variabilitat de la diana disminueix. S'han estudiat dos models d'RNasa P, la RNasa P humana guiada per seqüència guia externa (EGS) i l'RNA M1 de l'RNasa P d'E.coli unit a la seqüència guia per l'extrem 3' (ribozim M1GS). Abans però de dirigir el ribozim, s'han estudiat l'estructura i la variabilitat d'una regió del genoma del virus ja que s'ha descrit que són factors que poden limitar l'eficiència de qualsevol ribozim. Derivat d'aquests estudis s'aporten dades sobre accessibilitat i variabilitat d'una regió interna del genoma del virus de l'hepatitis C, la zona d'unió de la regió E2/NS2 (regió 2658-2869). L'estudi d'accessibilitat revela que la regió 2658-2869 del genoma del virus conté dominis oberts i tancats i que la transició entre uns i altres no és brusca si es compara amb altres regions d'estructura coneguda (regió 5' no codificant). Els resultats dels assajos in vitro amb els dos models de RNasa P mostren que s'ha aconseguit dirigir tant la ribonucleasa P humana com el ribozim M1GS cap a una zona, predeterminada segons l'estudi d'accessibilitat, com a poc estructurada i tallar l'RNA del virus. De l'anàlisi de mutacions, però, es dedueix que la regió estudiada és variable. Tot i dirigir el ribozim cap a la zona més accessible, la variació de la diana podria afectar la interacció amb la seqüència guia i per tant disminuir l'eficiència de tall. Si es proposés una estratègia terapèutica consistiria en un atac simultani de vàries dianes.D'altra banda i derivat d'un resultat inesperat on s'ha observat en els experiments control que l'extracte de RNasa P humana tallava l'RNA viral en absència de seqüències guia externes, s'ha caracteritzat una nova interacció entre l'RNA del VHC i la RNasa P humana. Per a la identificació de l'enzim responsable dels talls s'han aplicat diferents tècniques que es poden dividir en mètodes directes (RNA fingerprinting) i indirectes (immunoprecipitació i inhibicions competitives). Els resultats demostren que la ribonucleasa P humana, i no un altre enzim contaminant de l'extracte purificat, és la responsable dels dos talls específics observats i que es localitzen, un a l'entrada interna al ribosoma (IRES) i molt a prop del codó AUG d'inici de la traducció i l'altre entre la regió codificant estructural i no estructural. La ribonucleasa P és un dels enzims del metabolisme del tRNA que s'utilitza per identificar estructures similars al tRNA en substrats diferents del substrat natural. Així doncs, el fet que la ribonucleasa P reconegui i talli el genoma del VHC en dues posicions determinades suggereix que, a les zones de tall, el virus conté estructures semblants al substrat natural, és a dir estructures tipus tRNA. A més, tot i que el VHC és molt variable, els resultats indiquen que aquestes estructures poden ser importants per el virus, ja que es mantenen en totes les variants naturals analitzades. Creiem que la seva presència podria permetre al genoma interaccionar amb factors cel·lulars que intervenen en la biologia del tRNA,particularment en el cas de l'estructura tipus tRNA que es localitza a l'element IRES. Independentment però de la seva funció, es converteixen en unes noves dianes terapèutiques per a la RNasa P. S'ha de replantejar però l'estratègia inicial ja que la similitud amb el tRNA les fa susceptibles a l'atac de la ribonucleasa P, directament, en absència de seqüències guia externes.

Eliminación de compuestos causantes de olores mediante adsorbentes/catalizadores obtenidos a partir de lodos de depuradora

El aumento de la cantidad de lodos y las dificultades inherentes a su aplicación agrícola y/o disposición en vertederos, hace necesario encontrar nuevas alternativas para su gestión. A nivel europeo, hoy en día se tiende hacia la aplicación de tratamientos térmicos (incineración, pirólisis y gasificación) que permiten una valoración energética de los lodos, si bien generan un residuo sólido que sigue siendo necesario gestionar. El problema medioambiental provocado por (malos) olores resulta difícil de abordar de una manera genérica, teniendo en consideración la propia naturaleza del olor y sus posibles causas. Los olores en las EDARs son provocados básicamente por la degradación de la materia orgánica en condiciones anaeróbicas y se detectan en todas las operaciones unitarias en diferentes niveles de concentración. Esta tesis incidiendo en ambos aspectos, tiene por objeto investigar la valorización de lodos como materiales precursores de adsorbentes/ catalizadores para la eliminación de olores en el entorno de las EDARs, maximizando la reutilización de los lodos. Para la realización de los experimentos se han seleccionado lodos procedentes de tres EDARs situadas en la región de Girona (SC, SB, SL) que difieren en cuanto al tratamiento de los lodos. Ambas muestras han sido caracterizadas con el fin de determinar las diferencias más importantes en los lodos de partida. Los parámetros de caracterización incluyen el análisis de composición química (análisis elemental e inmediato, determinación contenido en cenizas, medida pH, DRX, FT-IR, SEM / EDX) así como análisis de superficie (adsorción de N2 y CO2). En primer lugar los lodos caracterizados han sido sometidos a diferentes tratamientos térmicos de gasificación y pirólisis y los adsorbentes/ catalizadores obtenidos se han probado como adsorbentes para la eliminación de H2S. Como consecuencia de este estudio, se ha desechado el uso de uno de lodos (SC) puesto que se obtenían resultados muy similares a (SB), a continuación el estudio se centró en el lodo de SL. Con este objetivo se han preparado 12 muestras 6 de ellas pirolizadas y 6 gasificadas en el rango de temperaturas que comprende 600-1100 ºC. Posteriormente las muestras han sido caracterizadas y se ha determinado la capacidad de eliminación (x/M) del H2S. Los resultados muestran que hemos sido capaces de obtener unos materiales que si bien, presentan un bajo desarrollo de porosidad dan lugar a valores de capacidades de eliminación elevados y comparables a carbones y materiales adsorbentes comerciales (Centaur, Sorbalit). Las elevadas eficiencias de eliminación se atribuyen básicamente a la presencia de especies catalíticamente activas tales como los óxidos mixtos de calcio y hierro determinados por DRX en las muestras tratadas térmicamente. El segundo bloque de resultados se centra la mejora de las propiedades texturales de estos materiales adsorbentes. Con este objetivo se llevaron acabo procesos de activación física con CO2 y química con H3PO4 e hidróxidos alcalinos (NaOH y KOH), que hasta el momento no se había probado con este tipo de precursores. Los resultados indican que la activación física (CO2) y química (H3PO4) no son unos buenos métodos para la obtención de adsorbentes altamente porosos con este tipo de materia prima bajo las condiciones probadas, sin embargo la activación con hidróxidos alcalinos da lugar a materiales adsorbentes con superficies específicas de hasta 1600 m2g-1. En el caso de la activación con hidróxidos, tanto el incremento de la relación agente activante/ precursor como el incremento de la temperatura producen un descenso del rendimiento, al mismo tiempo que incrementan el valor de SBET. Los materiales resultantes de la activación con hidróxidos alcalinos se han probado como adsorbentes/ catalizadores para la eliminación de H2S. Los resultados indican que un incremento del área superficial no es indicativo de un aumento de la capacidad de eliminación dada la naturaleza ácida de estos materiales obtenidos. Con el fin de contrarrestar el efecto ácido de estos materiales se han realizado los mismos ensayos añadiendo NaOH al lecho de reacción llegando a valores de x/M de hasta 450 mgg-1. Posteriormente también se han realizado ensayos de eliminación de NH3 con algunas de estas muestras, y los resultados obtenidos de x/M son del orden de carbones activados comerciales. Los materiales adsorbentes obtenidos tras la activación con hidróxidos alcalinos se convierten en materiales muy atractivos para ser utilizados como adsorbentes/ catalizadores de múltiples contaminantes (COVs, Hg...).

Museums and quality, from the concept of the museum that carries out functions to the museum that provides services

Quality management Self-evaluation of the organisation Citizens/customers satisfaction Impact on society evaluation Key performance evaluation Good practices comparison (Benchmarking) Continuous improvement In professional environments, when quality assessment of museums is discussed, one immediately thinks of the honourableness of the directors and curators, the erudition and specialisation of knowledge, the diversity of the gathered material and study of the collections, the collections conservation methods and environmental control, the regularity and notoriety of the exhibitions and artists, the building’s architecture and site, the recreation of environments, the museographic equipment design. We admit that the roles and attributes listed above can contribute to the definition of a specificity of museological good practice within a hierarchised functional perspective (the museum functions) and for the classification of museums according to a scale, validated between peers, based on “installed” appreciation criteria, enforced from above downwards, according to the “prestige” of the products and of those who conceive them, but that say nothing about the effective satisfaction of the citizen/customers and the real impact on society. There is a lack of evaluation instruments that would give us a return of all that the museum is and represents in contemporary society, focused on being and on the relation with the other, in detriment of the ostentatious possession and of the doing in order to meet one’s duties. But it is only possible to evaluate something by measurement and comparison, on the basis of well defined criteria, from a common grid, implicating all of the actors in the self-evaluation, in the definition of the aims to fulfil and in the obtaining of results.

A Generic Deformable Model for Vehicle Recognition

This paper reports the development of a highly parameterised 3-D model able to adopt the shapes of a wide variety of different classes of vehicles (cars, vans, buses, etc), and its subsequent specialisation to a generic car class which accounts for most commonly encountered types of car (includng saloon, hatchback and estate cars). An interactive tool has been developed to obtain sample data for vehicles from video images. A PCA description of the manually sampled data provides a deformable model in which a single instance is described as a 6 parameter vector. Both the pose and the structure of a car can be recovered by fitting the PCA model to an image. The recovered description is sufficiently accurate to discriminate between vehicle sub-classes.

Zinc deficiency in selected cultivars of wheat and barley as tested in solution culture

The relative zinc (Zn) efficiencies of 33 wheat and 3 barley cultivars were determined by growing them in chelate-buffered culture solutions. Zn efficiency, determined by growth in a Zn-deficient solution relative to that in a medium containing an adequate concentration of Zn, was found to vary between 10% and 63% among the cultivars tested. Out of the 36 cultivars tested, 12 proved to be Zn efficient, 10 were Zn inefficient, and the remaining 14 varieties were classed as intermediate. The most Zn-efficient cultivars included Bakhtawar, Gatcher S61, Wilgoyne, and Madrigal, and the most Zn inefficient included Durati, Songlen, Excalibur, and Chakwal-86. Zn-efficient cultivars accumulated greater amounts of Zn in their shoots than inefficient cultivars, but the correlation between shoot Zn and shoot dry matter production was poor. All the cultivars accumulated higher concentrations of iron (Fe), copper (Cu), manganese (Mn), and phosphorus (P) at deficient levels of Zn, compared with adequate Zn concentrations. The Zn-inefficient cultivars accumulated higher concentrations of these other elements compared to efficient cultivars.

Effect of acyl chain length on transfection efficiency and toxicity of polyethylenimine

Polyethylenimine (PEI) is an efficient nonviral gene delivery vector because of its high buffering capacity and DNA condensation ability. In our study, the amino groups on the polymeric backbone were acylated using acetic or propionic anhydride to alter the protonation behaviour and the hydrophilic/hydrophobic balance of the polymer. The concentration of acylated primary amines was determined using trinitrobenzene sulphonic acid assay. Results showed that our modified polymers had lower buffering capacities in solutions compared to PEI. The polymers were complexed with plasmid encoding enhanced green fluorescent protein at three different ratios (1:1, 1:2 and 1:10 w/w DNA to polymer) to form polyplexes and their toxicities and transfection efficiencies were evaluated in HEK 293 cells. Acylation reduced the number of primary amines on the polymer and the surface charge, improving haemocompatibility and reducing cytotoxicity. The reduction in the concentration of amino groups helped to optimise DNA compaction and facilitated polyplex dissociation in the cell, which increased transfection efficiency of the modified polymers compared to the parent polymer. Polymers with buffering capacities greater than 50% and less than 80% relative to PEI, showed higher transfection efficiencies than PEI. The propionic anhydride modified polymers had appropriate interactions with DNA which provided both DNA compaction and polyplex dissociation. These systems interacted better with the cell membrane because of their slightly higher lipophilicity and formed polyplexes which were less cytotoxic than polyplexes of acetic anhydride modified polymers. Among the vectors tested, 1:0.3 mol/mol PEI:propionic anhydride in a 1:2 w/w DNA:polymer composition provided the best transfection system with improved transfection efficiency and reduced cytotoxicity.

Vesicular systems for delivering conventional small organic molecules and larger macromolecules to and through human skin

The history of using vesicular systems for drug delivery to and through skin started nearly three decades ago with a study utilizing phospholipid liposomes to improve skin deposition and reduce systemic effects of triamcinolone acetonide. Subsequently, many researchers evaluated liposomes with respect to skin delivery, with the majority of them recording localized effects and relatively few studies showing transdermal delivery effects. Shortly after this, Transfersomes were developed with claims about their ability to deliver their payload into and through the skin with efficiencies similar to subcutaneous administration. Since these vesicles are ultradeformable, they were thought to penetrate intact skin deep enough to reach the systemic circulation. Their mechanisms of action remain controversial with diverse processes being reported. Parallel to this development, other classes of vesicles were produced with ethanol being included into the vesicles to provide flexibility (as in ethosomes) and vesicles were constructed from surfactants and cholesterol (as in niosomes). Thee ultradeformable vesicles showed variable efficiency in delivering low molecular weight and macromolecular drugs. This article will critically evaluate vesicular systems for dermal and transdermal delivery of drugs considering both their efficacy and potential mechanisms of action.

Factors governing cellular convection in orographic precipitation

The development of shallow cellular convection in warm orographic clouds is investigated through idealized numerical simulations of moist flow over topography using a cloud-resolving numerical model. Buoyant instability, a necessary element for moist convection, is found to be diagnosed most accurately through analysis of the moist Brunt–Väisälä frequency (N_m) rather than the vertical profile of θ_e. In statically unstable orographic clouds (N_m^2) < 0), additional environmental and terrain-related factors are shown to have major effects on the amount of cellularity that occurs in 2D simulations. One of these factors, the basic-state wind shear, may suppress convection in 2D yet allow for longitudinal convective roll circulations in 3D. The presence of convective structures within an orographic cloud substantially enhanced the maximum rainfall rates, precipitation efficiencies, and precipitation accumulations in all simulations.

Atmospheric chemistry of C4F9OC2H5 (HFE-7200), C4F9OCH3 (HFE-7100), C3F7OCH3 (HFE-7000) and C3F7CH2OH: temperature dependence of the kinetics of their reactions with OH radicals, atmospheric lifetimes and global warming potentials

The atmospheric chemistry of several gases used in industrial applications, C4F9OC2H5 (HFE-7200), C4F9OCH3 (HFE-7100), C3F7OCH3 (HFE-7000) and C3F7CH2OH, has been studied. The discharge flow technique coupled with mass-spectrometric detection has been used to study the kinetics of their reactions with OH radicals as a function of temperature. The infrared spectra of the compounds have also been measured. The following Arrhenius expressions for the reactions were determined (in units of cm3 molecule-1 s-1): k(OH + HFE-7200) = (6.9+2.3-1.7) × 10-11 exp(-(2030 ± 190)/T); k(OH + HFE-7100) = (2.8+3.2-1.5) × 10-11 exp(-(2200 ± 490)/T); k(OH + HFE-7000) = (2.0+1.2-0.7) × 10-11 exp(-(2130 ± 290)/T); and k(OH + C3F7CH2OH) = (1.4+0.3-0.2) × 10-11 exp(-(1460 ± 120)/T). From the infrared spectra, radiative forcing efficiencies were determined and compared with earlier estimates in the literature. These were combined with the kinetic data to estimate 100-year time horizon global warming potentials relative to CO2 of 69, 337, 499 and 36 for HFE-7200, HFE-7100, HFE-7000 and CF3CF2CF2CH2OH, respectively.

Isolation of lactoperoxidase using different cation exchange resins by batch and column procedures

Lactoperoxidase (LP) was isolated from whey protein by cation-exchange using Carboxymethyl resin (CM-25C) and Sulphopropyl Toyopearl resin (SP-650C). Both batch and column procedures were employed and the adsorption capacities and extraction efficiencies were compared. The resin bed volume to whey volume ratios were 0.96:1.0 for CM-25C and ≤ 0.64:1.0 for SP-650 indicating higher adsorption capacity of SP-650 compared to CM-25C. The effluent LP activity depended on both the enzyme activity in the whey and the amount of whey loaded on the column within the saturation limits of the resin. The percentage recovery was high below the saturation point and fell off rapidly with over-saturation. While effective recovery was achieved with column extraction procedures, the recovery was poor in batch procedures. The whey-resin contact time had little impact on the enzyme adsorption. SDS PAGE and HPLC analyses were also carried out, the purity was examined and the proteins characterised in terms of molecular weights. Reversed phase HPLC provided clear distinction of the LP and lactoferrin (LF) peaks. The enzyme purity was higher in column effluents compared to batch effluents, judged on the basis of the clarity of the gel bands and the resolved peaks in HPLC chromatograms.

Glucosinolate-accumulating S-cells in Arabidopsis leaves and flower stalks undergo programmed cell death at early stages of differentiation

Plant secondary metabolites glucosinolates (GSL) have important functions in plant resistance to herbivores and pathogens. We identified all major GSL that are accumulated in S-cells in Arabidopsis by MALDI-TOF MS, and estimated by LC-MS that the total GSL concentration in these cells is above 130 mM. The precise locations of the S-cells outside phloem bundles in rosette and cauline leaves and in flower stalks were visualised using sulphur mapping by cryo-SEM/EDX. S-cells contain up to 40% of total sulphur in flower stalk tissues. S-cells in emerging flower stalks and developing leaf tissues show typical signs of Programmed Cell Death (PCD) or apoptosis, such as chromatin condensation in the nucleus and blebbing of the membranes. TUNEL staining for DNA double strand breaks confirmed PCD in S-cells in postmeristematic tissues in the flower stalk as well as in the leaf. Our results show that S-cells in postmeristematic tissues proceed to an extreme degree of metabolic specialisation besides PCD. Accumulation and maintenance of a high concentration of GSL in these cells are accompanied by degradation of a number of cell organelles. The substantial changes in the cell composition during S-cell differentiation indicate the importance of this particular GSL-based phloem defence system. The specific anatomy of the S-cells and ability to accumulate specialised secondary metabolites is similar to that of the non-articulated laticifer cells in latex plants and thus indicates a common evolutionary origin.

Comparison of methane produced by straw fed sheep in open-circuit respiration with methane predicted by fermentation characteristics measured by an in vitro gas procedure

Reducing carbon conversion of ruminally degraded feed into methane increases feed efficiency and reduces emission of this potent greenhouse gas into the environment. Accurate, yet simple, predictions of methane production of ruminants on any feeding regime are important in the nutrition of ruminants, and in modeling methane produced by them. The current work investigated feed intake, digestibility and methane production by open-circuit respiration measurements in sheep fed 15 untreated, sodium hydroxide (NaOH) treated and anhydrous ammonia (NH3) treated wheat, barley and oat straws. In vitro fermentation characteristics of straws were obtained from incubations using the Hohenheim gas production system that measured gas production, true substrate degradability, short-chain fatty acid production and efficiency of microbial production from the ratio of truly degraded substrate to gas volume. In the 15 straws, organic matter (OM) intake and in vivo OM digestibility ranged from 563 to 1201 g and from 0.464 to 0.643, respectively. Total daily methane production ranged from 13.0 to 34.4 l, whereas methane produced/kg OM matter apparently digested in vivo varied from 35.0 to 61.8 l. The OM intake was positively related to total methane production (R2 = 0.81, P<0.0001), and in vivo OM digestibility was also positively associated with methane production (R2 = 0.67, P<0.001), but negatively associated with methane production/kg digestible OM intake (R2 = 0.61, P<0.001). In the in vitro incubations of the 15 straws, the ratio of acetate to propionate ranged from 2.3 to 2.8 (P<0.05) and efficiencies of microbial production ranged from 0.21 to 0.37 (P<0.05) at half asymptotic gas production. Total daily methane production, calculated from in vitro fermentation characteristics (i.e., true degradability, SCFA ratio and efficiency of microbial production) and OM intake, compared well with methane measured in the open-circuit respiration chamber (y = 2.5 + 0.86x, R2 = 0.89, P<0.0001, Sy.x = 2.3). Methane production from forage fed ruminants can be predicted accurately by simple in vitro incubations combining true substrate degradability and gas volume measurements, if feed intake is known.

Bayes estimates of distance-to-market: Transactions costs, cooperatives and milk-market development in the Ethiopian highlands

Rationalizing non-participation as a resource deficiency in the household, this paper identifies strategies for milk-market development in the Ethiopian highlands. The additional amounts of covariates required for Positive marketable surplus -'distances-to market'-are computed from a model in which production and sales are correlated; sales are left-censored at some Unobserved thresholds production efficiencies are heterogeneous: and the data are in the form of a panel. Incorporating these features into the modeling exercise ant because they are fundamental to the data-generating environment. There are four reasons. First, because production and sales decisions are enacted within the same household, both decisions are affected by the same exogenous shocks, and production and sales are therefore likely to be correlated. Second. because selling, involves time and time is arguably the most important resource available to a subsistence household, the minimum Sales amount is not zero but, rather, some unobserved threshold that lies beyond zero. Third. the Potential existence of heterogeneous abilities in management, ones that lie latent from the econometrician's perspective, suggest that production efficiencies should be permitted to vary across households. Fourth, we observe a single set of households during multiple visits in a single production year. The results convey clearly that institutional and production) innovations alone are insufficient to encourage participation. Market-precipitating innovation requires complementary inputs, especially improvements in human capital and reductions in risk. Copyright (c) 20 08 John Wiley & Sons, Ltd.

Evaluating the efficiency of sampling methods in assessing soil macrofauna communities in arable systems

The soil fauna is often a neglected group in many large-scale studies of farmland biodiversity due to difficulties in extracting organisms efficiently from the soil. This study assesses the relative efficiency of the simple and cheap sampling method of handsorting against Berlese-Tullgren funnel and Winkler apparatus extraction. Soil cores were taken from grassy arable field margins and wheat fields in Cambridgeshire, UK, and the efficiencies of the three methods in assessing the abundances and species densities of soil macroinver-tebrates were compared. Handsorting in most cases was as efficient at extracting the majority of the soil macrofauna as the Berlese-Tullgren funnel and Winkler bag methods, although it underestimated the species densities of the woodlice and adult beetles. There were no obvious biases among the three methods for the particular vegetation types sampled and no significant differences in the size distributions of the earthworms and beetles. Proportionally fewer damaged earthworms were recorded in larger (25 x 25 cm) soil cores when compared with smaller ones (15 x 15 cm). Handsorting has many benefits, including targeted extraction, minimum disturbance to the habitat and shorter sampling periods and may be the most appropriate method for studies of farmland biodiversity when a high number of soil cores need to be sampled. (C) 2008 Elsevier Masson SAS. All rights reserved.