Immobilization of Catalysts of Biological Interest on Porous Oxidized Silicon Surfaces

The present paper deals with the immobilization of redox mediators and proteins onto protected porous silicon surfaces to obtain their direct electrochemical reactions and to retain their bioactivities. This paper shows that MP-11 and viologens are able to establish chemical bonds with 3-aminopropyltriethoxylsilane-modified porous silicon surface. The functionalization of the surfaces have been fully characterized by energy dispersive X-ray analysis (EDX) and X-ray photoelectron spectroscopy (XPS) to examine the immobilization of these mediators onto the solid surface. Amperometric and open circuit potential measurements have shown the direct electron transfer between glucose oxidase and the electrode in the presence of the viologen mediator covalently linked to the 3-aminopropyltriethoxylsilane (APTES)-modified porous silicon surfaces.

Nanocatalysts for sustainable industrial processses

In Chapter 1, rhodium nanoparticles were supported on multiwalled carbon nanotubes (MWCNTs) and bound to the magnetic core-shell system Fe3O4@TiO2. The composite Fe3O4@TiO2-Rh-MWCNT and the intermediates were characterized by SEM, EDS and TEM. Their catalytic activity was studied using i) the hydrogenation transfer of nitroarenes and cyclohexene in the presence of hydrazine hydrate; ii) the reduction of 2-nitrophenol with NaBH4; and iii) the decoloration of pigments in the presence of hydrogen peroxide. The results were monitored by gas chromatography (i) and UV Visible (ii and iii). In the second chapter, the catalytic activity of six oxidovanadium(V) aroylhydrazone complexes, viz. [VOL1(OEt)][VOL1(OEt)(EtOH)] (1), [VOL2(OEt)] (2), [Et3NH][VO2L1] (3), [VO2(H2L2)]2·EtOH (4), [VOL1(µ -O)VOL1] (5) and [VOL2(µ -O)VOL2] (6) (H2L1 = 3,5-di-tert-butyl-2-hydroxybenzylidene)-2hydroxybenzohydrazide and H2L2 = 3,5-di-tert-butyl-2-hydroxybenzylidene)-2 aminobenzohydrazide), anchored on nanodiamonds with different treatments, was studied towards the microwave-assisted partial oxidation of 1-phenylethanol to acetophenone in the presence of tert-butyl hydroperoxide (TBHP) as oxidant. A high selectivity for acetophenone was achieved for the optimized conditions. The possibility of recycling and reuse the heterogeneous catalysts was also investigated. In chapter 3, the catalytic activity of gold nanoparticles supported at different metal oxides, such as Fe2O3, Al2O3 ZnO or TiO2, was studied for the above reaction. The effect of the support, quantity of the catalyst and temperature was investigated. The recyclability of the gold catalysts was also studied. In the last chapter, a new copper nanocomposite with functionalized mutiwalled carbon nanotubes (Cu-MWCNT) was synthesized using a microwave assisted polyol method. The characterization was performed using XRD and SEM. The catalytic activity of Cu-MWCNT was studied through the degradation of pigments, such as amaranth, brilliant blue, indigo, tartrazine and methylene blue.

Processamento e caracterização de compósitos Poli(METACRILATO DE METILA)/Sílica (PMMA/SiO2)

Currently the search for new materials with properties suitable for specific applications has increased the number of researches that aim to address market needs. The poly (methyl methacrylate) (PMMA) is one of the most important polymers of the family of polyacrylates and polymethacrylates, especially for its unique optical properties and weathering resistance, and exceptional hardness and gloss. The development of polymer composites by the addition of inorganic fillers to the PMMA matrix increases the potential use of this polymer in various fields of application. The most commonly used inorganic fillers are particles of silica (SiO2), modified clays, graphite and carbon nanotubes. The main objective of this work is the development of PMMA/SiO2 composites at different concentrations of SiO2, for new applications as engineering plastics. The composites were produced by extrusion of tubular film, and obtained via solution for application to commercial PMMA plates, and also by injection molding, for improved the abrasion and scratch resistance of PMMA without compromising transparency. The effects of the addition of silica particles in the polymer matrix properties were evaluated by the maximum tensile strength, hardness, abrasion and scratch resistance, in addition to preliminary characterization by torque rheometry and melt flow rate. The results indicated that it is possible to use silica particles in a PMMA matrix, and a higher silica concentration produced an increase of the abrasion and scratch resistance, hardness, and reduced tensile strength

Dispersed lipid liquid crystalline phases stabilized by a hydrophobically modified cellulose

Aqueous dispersions of monoolein (MO) with a commercial hydrophobically modified ethyl hydroxyethyl cellulose ether (HMEHEC) have been investigated with respect to the morphologies of the liquid crystalline nanoparticles. Only very low proportions of HMEHEC are accepted in the cubic and lamellar phases of the monoolein-water system. Due to the broad variation of composition and size of the commercial polymer, no other single-phase regions were found in the quasi-ternary system. Interactions of MO with different fractions of the HMEHEC sample induced the formation of lamellar and reversed hexagonal phases, identified from SAXD, polarization microscopy, and cryogenic TEM examinations. In excess water (more than 90 wt %) coarse dispersions are formed more or less spontaneously, containing particles of cubic phase from a size visible by the naked eye to small particles observed by cryoTEM. At high polymer/MO ratios, vesicles were frequently observed, often oligo-lamellar with inter-lamellar connections. After homogenization of the coarse dispersions in a microfluidizer, the large particles disappeared, apparently replaced by smaller cubic particles, often with vesicular attachments on the surfaces, and by vesicles or vesicular particles with a disordered interior. At the largest polymer contents no proper cubic particles were found directly after homogenization but mainly single-walled defected vesicles with a peculiar edgy appearance. During storage for 2 weeks, the dispersed particles changed toward more well-shaped cubic particles, even in dispersions with the highest polymer contents. In some of the samples with low polymer/MO ratio, dispersed particles of the reversed hexagonal type were found. A few of the homogenized samples were freeze-dried and rehydrated. Particles of essentially the same types, but with a less well-developed cubic character, were found after this treatment. © 2007 American Chemical Society.

Biomimetic sensor based on 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H- porphyrin iron (III) chloride and MWCNT for selective detection of 2,4-D

Exploitation of the electronic properties of carbon nanotubes for the development of voltammetric and amperometric sensors to monitor analytes of environmental relevance has increased in recent years. This work reports the development of a biomimetic sensor based on a carbon paste modified with 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin iron (III) chloride (a biomimetic catalyst of the P450 enzyme) and multi-wall carbon nanotubes (MWCNT), for the sensitive and selective detection of the herbicide 2,4- dichlorophenoxyacetic acid (2,4-D). The sensor was evaluated using cyclic voltammetry and amperometry, for electrochemical characterization and quantification purposes, respectively. Amperometric analyses were carried out at -100 mV vs. Ag/AgCl(KClsat), using a 0.1 mol L-1 phosphate buffer solution at pH 6.0 as the support electrolyte. Under these optimized analytical conditions, the sensor showed a linear response between 9.9 × 10-6 and 1.4 × 10-4 mol L-1, a sensitivity of 1.8 × 104 (±429) μA L mol -1, and limits of detection and quantification of 2.1 × 10 -6 and 6.8 × 10-6 mol L-1, respectively. The incorporation of functionalized MWCNT in the carbon paste resulted in a 10-fold increase in the response, compared to that of the biomimetic sensor without MWCNT. In addition, the low applied potential (-100 mV) used to obtain high sensitivity also contributed to the excellent selectivity of the proposed sensor. The viability of the application of this sensor for analysis of soil samples was confirmed by satisfactory recovery values, with a mean of 96% and RSD of 2.1% (n = 3). © 2013 Elsevier B.V.

Estudo da cinética de cristalização e de degradação de compósitos nanoestruturados de poliamida 6,6/nanotubos de carbonos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da cinética de cura e das propriedades térmicas da resina benzoxazina e de seus compósitos nanoestruturados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação simultânea de ferro e cobre em etanol combustível utilizando eletrodo de nanotubos de carbono modificados

Pós-graduação em Química - IQ

Eletrônica molecular via método híbrido DFT/FGNE em anéis fenilas acoplados a eletrodos metálicos de nanotubos de carbono: a regra de conformação e quiralidade molecular

Nesta tese, investigamos detalhadamente as propriedades de transporte eletrônico, conformacional e de simetria de estruturas de Nanotubos de Carbono de Parede Simples zigzag (9,0), NCPS zz9, acopladas a anéis fenilas (2, 3, 4 e 5) sob influência de campo elétrico externo (voltagem) via método híbrido da Teoria do Funcional Densidade (DFT) do tipo B3LYP 6-311G(d,p) combinado com Função de Green de Não Equilíbrio (FGNE) e Teoria de Grupo. Verificamos uma boa relação entre: 1- o índice quiral () por Teoria de Grupo e a lei do cos2 (, ângulo diedral) por geometria sob a influência de campo elétrico externo, pois  só depende das posições atômicas (), das conformações, e também está fortemente correlacionada a corrente que passa através do sistema; 2- a condutância normalizada (G/Go) é proporcional a cos2 na região do gap (EHOMO-ELUMO), isto é, nas regiões onde ocorre a ressonância e a resistência diferencial negativa (RDN); 3- o gráfico Fowler-Northeim (FN) exibe mínimo de voltagem (Vmin) que ocorre sempre que a cauda de um pico de transmissão ressonante entra na janela de voltagem, isto é, quando nessas estruturas ocorre uma RDN, pois o número de RDN na curva I-V está associado ao número de Vmin no gráfico FN e pode ser explicado pelo modelo de transporte molecular coerente; 4- a altura da barreira (EF - EHOMO e ELUMO - EF) como função do comprimento molecular; 5- Vmin como função da altura da barreira (EF - EHOMO) e do comprimento molecular. Assim, 1 implica que a conformação molecular desempenha um papel preponderante na determinação das propriedades de transporte da junção; 2 sugere que a lei do cos2 tem uma aplicabilidade mais geral independentemente da natureza dos eletrodos; 3 serve como um instrumento espectroscópico e também para identificar a molécula na junção; 4 e 5 a medida que o comprimento molecular atinge um certo valor (1,3nm) o Vmin permanece praticamente inalterado. Os resultados mostraram que as propriedades estruturais sofrem alterações significativas com o aumento da voltagem que estão em boa concordância com os valores encontrados na literatura. O comportamento das curvas IxV e G/GoxV perdem sua dependência linear para dar origem a um comportamento não linear com aparecimento de RDN. Tal ponto revela a modificação estrutural sofrida pelo sistema. A curva IxV confirmou as afirmações que foram feitas através da análise estrutural para o sistema considerado e mostrou como se dá o fluxo de carga nos sistemas analisados.

Detecção de anilinas substituídas, em filmes de hexacianoferratos, com microbalança de cristal de quartzo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de dispositivos para diagnósticos e genotipagem de Hepatite C

Pós-graduação em Química - IQ

Processamento e caracterização de compósitos de resina fenólica com nanotubos de carbono com aplicações aeroespaciais

Este trabalho de pesquisa consistiu na obtenção de compósitos nanoestruturados utilizando matrizes poliméricas termorrígidas e nanotubos de carbono (CNT) e posterior caracterização de suas propriedades mecânicas, térmicas, elétricas, reológicas e demais características físico-químicas para aplicações aeroespaciais. As atividades experimentais para a realização deste trabalho foram, em sua maioria, conduzidas na Alemanha. Durante o desenvolvimento deste trabalho de pesquisa, foi possível entender melhor como deve ser realizada a purificação, funcionalização e dispersão de CNT em compósitos poliméricos. Desta forma, CNT foram caracterizados e utilizados como reforços para a obtenção de compósitos nanoestruturados em matrizes termorrígidas (resina fenólica). Estes compósitos foram processados, por meio de cura em autoclave e avaliados com relação aos seus desempenhos mecânicos, físico-químicos e morfológicos. Duas metodologias foram utilizadas para permitir a dispersão dos CNT: dispersão em solução aquosa e por calandragem (TRC). Os resultados obtidos mostram que a metodologia mais adequada para dispersar os CNT em resina fenólica é a partir do processo por calandragem e que teores superiores a 0,5% em massa de CNT não resultam em melhorias significativas quanto aos desempenhos viscoelástico, térmico, elétrico e mecânico destes compósitos. Ainda, a partir dos ensaios reológicos e elétricos, foi observado que teores abaixo de 0,2% em massa de CNT já são suficientes para promover a percolação dos CNT na resina fenólica, gerando mudanças significativas no comportamento físico-químico do compósito nanoestruturado. A partir deste trabalho de pesquisa...

Desenvolvimento de eletrodos com materiais nanoestruturados para determinação de corantes de cabelo

Pós-graduação em Química - IQ

Desenvolvimento de sensor baseado em eletrodo modificado com nanotubos de carbono contendo pentacianonitrosilferratos de metais para determinação de antioxidantes em microemulsão de biodiesel

Pós-graduação em Química - IQ

Benzoxazine resin and their nanostructured composites cure kinetic by DSC

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)