Numerical Analyses of Transonic Fluid/Structure interaction in Aircraft Engineering

Through the coupling between aerodynamic and structural governing equations, a fully implicit multiblock aeroelastic solver was developed for transonic fluid/stricture interaction. The Navier-Stokes fluid equations are solved based on LU-SGS (lower-upper symmetric Gauss-Seidel) Time-marching subiteration scheme and HLLEW (Harten-Lax-van Leer-Einfeldt-Wada) spacing discretization scheme and the same subiteration formulation is applied directly to the structural equations of motion in generalized coordinates. Transfinite interpolation (TFI) is used for the grid deformation of blocks neighboring the flexible surfaces. The infinite plate spline (IPS) and the principal of virtual work are utilized for the data transformation between fluid and structure. The developed code was fort validated through the comparison of experimental and computational results for the AGARD 445.6 standard aeroelastic wing. In the subsonic and transonic range, the calculated flutter speeds and frequencies agree well with experimental data, however, in the supersonic range, the present calculation overpredicts the experimental flutter points similar to other computations. Then the flutter character of a complete aircraft configuration is analyzed through the calculation of the change of structural stiffness. Finally, the phenomenon of aileron buzz is simulated for the weakened model of a supersonic transport wing/body model at Mach numbers of 0.98 and l.05. The calculated unsteady flow shows, on the upper surface, the shock wave becomes stronger as the aileron deflects downward, and the flow behaves just contrary on the lower surface of the wing. Corresponding to general theoretical analysis, the flow instability referred to as aileron buzz is induced by a stronger shock alternately moving on the upper and lower surfaces of wing. For the rigid structural model, the flow is stable at all calculated Mach numbers as observed in experiment

Release of Sulfur and Chlorine during Cofiring RDF and Coal in an Internally Circulating Fluidized Bed

An internally circulating fluidized bed (ICFB) was applied to investigate the behavior of chlorine and sulfur during cofiring RDF and coal. The pollutant emissions in the flue gas were measured by Fourier transform infrared (FTIR) spectrometry (Gasmet DX-3000). In the tests, the concentrations of the species CO, CO2, HCl, and SO2 were measured online. Results indicated when cofiring RDF and char, due to the higher content of chlorine in RDF, the formation of HCl significantly increases. The concentration of SO2 is relatively low because alkaline metal in the fuel ash can absorb SO2. The concentration of CO emission during firing pure RDF is relatively higher and fluctuates sharply. With the CaO addition, the sulfur absorption by calcium quickly increases, and the desulfuration ratio is bigger than the dechlorination ratio. The chemical equilibrium method is applied to predict the behavior of chlorine. Results show that gaseous HCl emission increases with increasing RDF fraction, and gaseous KCl and NaCl formation might occur.

Modeling of Ammonothermal Growth of Gallium Nitride Single Crystals

Ammonothermal growth of GaN crystals with a retrograde solubility has been modeled and simulated here using fluid dynamics, thermodynamics and heat transfer models. The nutrient is considered as a porous media bed and the flow in the porous charge is simulated using the Darcy-Brinkman-Forchheimer model. The resulting governing equations are solved using the finite volume method. For the case of retrograde solubility, the charge is put above the baffle. The temperature difference between the dissolving zone and growth zone is found smaller than that applied on the sidewall of autoclave. The baffle opening has a strong effect on the nutrient transport and supersaturation of GaN species in the growth zone.

Statistics of Turbulence in Benthal Boundary Layers

This paper deals with turbulence behavior inbenthalboundarylayers by means of large eddy simulation (LES). The flow is modeled by moving an infinite plate in an otherwise quiescent water with an oscillatory and a steady velocity components. The oscillatory one aims to simulate wave effect on the flow. A number of large-scale turbulence databases have been established, based on which we have obtained turbulencestatisticsof the boundarylayers, such as Reynolds stress, turbulence intensity, skewness and flatness ofturbulence, and temporal and spatial scales of turbulent bursts, etc. Particular attention is paid to the dependences of those statistics on two nondimensional parameters, namely the Reynolds number and the current-wave velocity ratio defined as the steady current velocity over the oscillatory velocity amplitude. It is found that the Reynolds stress and turbulence intensity profile differently from phase to phase, and exhibit two types of distributions in an oscillatory cycle. One is monotonic occurring during the time when current and wave-induced components are in the same direction, and the other inflectional occurring during the time when current and wave-induced components are in opposite directions. Current component makes an asymmetrical time series of Reynolds stress, as well as turbulence intensity, although the mean velocity series is symmetrical as a sine/cosine function. The skewness and flatness variations suggest that the turbulence distribution is not a normal function but approaches to a normal one with the increasing of Reynolds number and the current-wave velocity ratio as well. As for turbulent bursting, the dimensionless period and the mean area of all bursts per unit bed area tend to increase with Reynolds number and current-wave velocity ratio, rather than being constant as in steady channel flows.

Transport Phenomena in Ammonothermal Growth of Gallium Nitride

GaN can be used to fabricate blue/green/UV LEDs and high temperature, high power electronic devices. Ideal substrates are needed for high quality III-nitride epitaxy, which is an essential step for the manufacture of LEDs. GaN substrates are ideal to be lattice matched and isomorphic to nitride-based films. Bulk single crystals of GaN can be grown from supercritical fluids using the ammonothermal method, which utilizes ammonia as fluid rather than water as in the hydrothermal process. In this process, a mineralizer such as amide, imide or azide is used to attack a bulk nitride feedstock at temperatures from 200 - 500癈 and pressures from 1 - 4 kbar. Baffle design is essential for successful growth of GaN crystals. Baffle is used to separate the dissolving zone from the growth zone, and to maintain a temperature difference between the two zones. For solubility curve with a positive coefficient with respect to temperature, the growth zone is maintained at a lower temperature than that in the dissolving zone, thus the nutrient becomes supersaturated in the growth zone. The baffle opening is used to control the mixing of nutrients in the two zones, thus the transfer of nutrient from the lower part to the upper part. Ammonothermal systems have been modeled here using fluid dynamics, thermodynamics and heat transfer models. The nutrient is considered as a porous media bed and the flow is simulated using the Darcy-Brinkman-Forchheimer model. The resulting governing equations are solved using the finite volume method. We investigated the effects of baffle opening and position on the transport phenomena of nutrient from dissolving zone to the growth zone. Simulation data have been compared qualitatively with experimental data.

KEITS Training Services: Moving to Mobile - assessment with Blackberry devices

Work-based learning provider, KEITS has improved efficiencies and institutional effectiveness with the introduction of Blackberry mobile devices to all their assessors. They have saved time and money on paper and travel, diversified evidence capture and improved their overall engagement with learners.

Moving across cultures: translation as intercultural transfer

Santamaría, José Miguel; Pajares, Eterio; Olsen, Vickie; Merino, Raquel; Eguíluz, Federico (eds.)

Application of a new pelletised organic bed for tex biodegradation in conventional biofilters

La problemática de las emisiones de gases contaminados generadas por las actividades humanas ha obligado al desarrollo de distintas tecnologías de tratamiento cuyo objetivo es minimizar el efecto de las mismas sobre el medio ambiente.La biofiltración es una de estas tecnologías de bajo coste que además es respetuosa con el entorno. Básicamente consiste en hacer pasar un gas contaminado a través de un medio poroso donde anida la biomasa que lleva a cabo la degradación de los contaminantes, generando productos no nocivos. El presente estudio se ha centrado en aportar soluciones a una de las principales limitaciones que presentan estos sistemas biológicos: el excesivo tiempo empleado por la biomasa para adaptarse a los contaminantes y degradarlos eficazmente.Se ha desarrollado una sistemática de aclimatación que ha permitido acortar el tiempo de adaptación de la biomasa específica para la eliminación de compuestos orgánicos volátiles (COVs). Estos compuestos, más específicamente los TEX (tolueno, p-xileno y etilbenceno), son uno de los grupos de contaminantes más habituales a nivel industrial, e incluso en ambientes interiores. La optimización de los parámetros de operación que afectan a esta tecnología (el nivel de humedad del soporte, temperatura, la interacción de varios contaminantes presentes en la misma corriente gaseosa, entre otros), ha llevado a la consecución de eficacias de depuración muy elevadas en el biotratamiento en continuo de corrientes gaseosas contaminadas.

Good practice guidance for library and information professionals - moving towards accessible e-book platforms

Good practice guidance for publishers and procurers of e-book platforms based on the benefits and barriers identified by robust testing using real people with disabilities

Crossing the Threshold: Moving e-portfolios into the mainstream

Crossing the Threshold, one of a series of advice and guidance publications, is designed to support use of the online e-Portfolio Implementation Toolkit and video case studies by those involved in wide-scale implementation of e-portfolios in their institutions. As the resources address the needs of both managers and practitioners, the publication has relevance for a wide range of readers in further and higher education and work-based learning. To assist the planning and effective management of a large-scale e-portfolio implementation, Crossing the Threshold follows the stages of an implementation journey with insights and guidance drawn from the toolkit and its supporting case studies. Links are provided throughout the publication to more detailed information in the two online resources.

"Empty bed blues": Terry McMillan's Waiting to Exhale (1992), novel into film

Santamaría, José Miguel; Pajares, Eterio; Olsen, Vickie; Merino, Raquel; Eguíluz, Federico (eds.)

Written words turned into moving Images: Jeanette Winterson translates "Oranges Are Not the Only Fruit for the Screen"

Eterio Pajares, Raquel Merino y José Miguel Santamaría (eds.)

EMBL-EBI: moving, sharing and controlling large datasets

Supporting presentation slides as part of the Janet network end to end performance initiative