An objective method to monitor and quantify texture of salted herring during ripening in barrels at 4°C

Changes in the texture (elastic nature) of the flesh of barrel salted herring during the ripening process at 4°C have been monitored. The method employs the analysis of stress-relaxation curves after compression to half of the sample thickness on an lnstron Model 1112. The parameter 'T/P' for each sample represents the reciprocal of the gradient of a line connecting P and T0.368p. This parameter characteristic of each sample's texture was calculated as the ratio of 'T/P' where, T is the relaxation time and is defined as the time required for a stress at constant strain to decrease to 1/e of its original value, where 'e' is the base of natural logarithms (2.7183). Since 1/e=0.368, the relaxation time is the time required for the force to decay to 36.8% of its original value. P is the peak height of the curve (i.e. the force value at the maximum height). This method was adopted from the bakery industry for testing the degree of gluten development in bread dough. The 'T/P' values obtained over the course of ripening for differently treated salted-herring in barrels ranged between 1 and 12. The trends in 'T/P' value, during ripening period for the different samples, appeared to be parallel changes in texture perceived by sensory observation (subjective measurement), although the heterogeneous nature of the samples gave standard deviations, about the replicate sample mean, around 5%. The method appears promising as an objective measure for monitoring this aspect of the textural quality of barrel salted-herring through ripening if reproducibility of test results can be improved by more careful standardization of sample preparation and test protocol.

Dried fish cakes with improved texture

To overcome the problem of underutilization of marine by-catches, Basu et al. (1985) developed fish cube from minced fish meat. Although the product was acceptable, it had little rubbery texture. An attempt was made to improve the texture of the cake by several methods. It was found that 5% tapioca starch along with 3% texturised soybean protein improved the texture and juiciness of the rehydrated product. Preheating of the minced meat at 70°C for 30 minutes also improved the texture appreciably. It was also found that mixing of the ingredients at low speed (less than 100 rpm) in a dough mixer gave the best texture, higher speed and sharp blades leading to rubbery texture. The dehydrated product (moisture 19-20%) thus prepared had a shelf life of six months at ambient temperature.

Standardization and frozen storage of fish cutlet from bleached and unbleached mackerel mincemeat

In the present study, fish cutlets were prepared from bleached and unbleached mackerel mincemeat. Fish cutlets prepared from bleached meat had scored higher values for taste, flavour and overall acceptability as compared to those from unbleached mincemeat. Fish cutlets prepared with corn flour at the rate of 15% of fish mincemeat had scored higher values for all attributes as compared to other levels. Between the bleached and unbleached mincemeat, the scores for cutlet prepared with bleached mincemeat had higher score than that for the latter. There were no cracks in cutlets prepared with 15% and above corn flour levels as compared to those with lower levels. Fish cutlets prepared from bleached and unbleached mincemeat with spice mixture at 20 and 30% of the fish mince, respectively, had higher scores for taste, flavour, texture and overall acceptability as compared to those with other levels. Organoleptic quality of cutlet prepared from bleached and unbleached mackerel mince did not show changes in the appearance, colour and texture during storage. Changes were more prominent in flavour, taste and overall acceptability. Fish cutlets prepared from bleached mincemeat were acceptable for two months and those from unbleached mincemeat were acceptable up to one month from the point of view of organoleptic and biochemical qualities.

Reconstruction of surfaces of revolution from single uncalibrated views

This paper addresses the problem of recovering the 3D shape of a surface of revolution from a single uncalibrated perspective view. The algorithm introduced here makes use of the invariant properties of a surface of revolution and its silhouette to locate the image of the revolution axis, and to calibrate the focal length of the camera. The image is then normalized and rectified such that the resulting silhouette exhibits bilateral symmetry. Such a rectification leads to a simpler differential analysis of the silhouette, and yields a simple equation for depth recovery. It is shown that under a general camera configuration, there will be a 2-parameter family of solutions for the reconstruction. The first parameter corresponds to an unknown scale, whereas the second one corresponds to an unknown attitude of the object. By identifying the image of a latitude circle, the ambiguity due to the unknown attitude can be resolved. Experimental results on real images are presented, which demonstrate the quality of the reconstruction. © 2004 Elsevier B.V. All rights reserved.

Thin film shape memory alloys and microactuators

For Micro-electro-mechanical System (MEMS) applications, TiNi-based thin film Shape Memory Alloys (SMAs) possess many desirable properties, such as high power density, large transformation stress and strain upon heating and cooling, superelasticity and biocompatibility. In this paper, recent development in TiNi-based thin film SMA and microactuator applications is discussed. The topics related to film deposition and characterisation is mainly focused on crystal nucleation and growth during annealing, film thickness effect, film texture, stress induced surface relief, wrinkling and trenches as well as Temperature Memory Effect (TME). The microactuator applications are mainly focused on microvalve and microcage for biological applications, micromirror for optical applications and data storage using nanoindentation method. Copyright © 2009, Inderscience Publishers.

Early developmental stages of two Secutor species (Family: Leiognathidae) collected from the Bak-khali river estuary of the Bay of Bengal, Bangladesh

Early developmental stages of two Secutor species, Secutor insidiator (Bloch) (11.9-36.0 mm standard length, SL) and Secutor ruconius (Hamilton-Buchanan) (14.0-33.0 mm SL) collected by ichthyoplankton net from the Bak-khali river estuary of the Bay of Bengal, Cox's Bazar, Bangladesh are described and illustrated. All of the fins with supporting spines and rays were present in the smallest collected sizes of both species. With growth of the specimens, significant changes in melanophore patterns were found. S. insidiator is similar to S. ruconius in having upward protracting mouth parts and body colouration, but can be distinguished easily by its more elongate body shape (body depth 38-47% of SL compared with 46-52% of SL in Secutor ruconius). Both the species occurred round the year from August 1998 to July 1999. The surface water temperature and salinity during the study period varied from 22.0-32) C and 10-37 ppt respectively.

Learning shape priors for single view reconstruction

In this paper, we aim to reconstruct free-from 3D models from a single view by learning the prior knowledge of a specific class of objects. Instead of heuristically proposing specific regularities and defining parametric models as previous research, our shape prior is learned directly from existing 3D models under a framework based on the Gaussian Process Latent Variable Model (GPLVM). The major contributions of the paper include: 1) a probabilistic framework for prior-based reconstruction we propose, which requires no heuristic of the object, and can be easily generalized to handle various categories of 3D objects, and 2) an attempt at automatic reconstruction of more complex 3D shapes, like human bodies, from 2D silhouettes only. Qualitative and quantitative experimental results on both synthetic and real data demonstrate the efficacy of our new approach. ©2009 IEEE.

An evaluation of volumetric interest points

This paper presents the first performance evaluation of interest points on scalar volumetric data. Such data encodes 3D shape, a fundamental property of objects. The use of another such property, texture (i.e. 2D surface colouration), or appearance, for object detection, recognition and registration has been well studied; 3D shape less so. However, the increasing prevalence of depth sensors and the diminishing returns to be had from appearance alone have seen a surge in shape-based methods. In this work we investigate the performance of several detectors of interest points in volumetric data, in terms of repeatability, number and nature of interest points. Such methods form the first step in many shape-based applications. Our detailed comparison, with both quantitative and qualitative measures on synthetic and real 3D data, both point-based and volumetric, aids readers in selecting a method suitable for their application. © 2011 IEEE.

Utilization of trash fish for human consumption. 3: Studies on the development of fish pickle from Nemipterus japonicus

A method for the preparation of fish pickles from a lean variety of fish namely pink perch (Nemipterus japonicus) is described. Dipping the fish in 10% sodium chloride solution containing 6% acetic acid before pickling, was found desirable for retaining the meaty texture of the product. The product has no fish smell or flavour and has a shelf life of more than six months at ambient temperatures and scored very well in organoleptic tests.

Studies on the suitability of producing value-added products from silver carp, Hypophthalmichthys molitrix

Silver carp, Hypophthalmichthys molitrix is contributing significantly to the total production of fish through aquaculture in Bangladesh. However, its low market price has become a serious concern to the fish farmers. The suitability of silver carp mince for the production of various value-added products (VAPs) - surimi, fish sausage, fish burger and fish stick was studied during April-September 2000 to ensure more appropriate and profitable utilization of silver carp. Surimi/frozen mince block was produced by washing the silver carp mince with 0.1% NaCl for 7-8 min (4-5 min agitation and 3-4 min settling). A two-step heating schedule for incubation at 50°C for 2 h and cooking at 95°C for 30 min gave high textured good quality consumer product. With the addition of cryoprotectants, surimi could be kept frozen for 5 months without loosing [sic] much of its textural and sensory qualities. Mince-mix and a batter with different ingredients and spices were formulated to produce fish burger using potato smash as the binding agent. Fish flake-mix and a batter with different ingredients and spices were formulated to prepare fish stick using both potato starch and potato smash as filler ingredients. Unwashed and washed frozen mince block or fresh flesh of silver carp was used to prepare fish sausage by heating at 100°C for 1 h after incubating at 50°C for 2 h. A spice-mix formulated with various local spices at the rate of 1.0-1.2% gave good texture and flavor to the sausage. A good-appeared sausage-pink color was developed by combining three food-grade colors of asthaxanthin. Products prepared with potato starch, potato smash and rice smash had an acceptable bacterial load in refrigeration (5°C) for up to 8 days and in room temperature (28°C) for up to 3 days. No coliform bacteria were found in the products prepared.

Water imbibition and thawing losses from frozen prawn meat

Prawn meat which was never in contact with ice or water prior to freezing was frozen at -30°C and was studied up to six months of storage at -23°C for thawing losses and cooked characteristics of the thawed material. Thawing loss was nil in unwashed samples after three days of storage and it gradually increased to 6.6% after 6 months compared to 6.0 and 18.2% in the washed samples during the same periods. It is inferred that the high thawing losses observed in commercial frozen prawn meat immediately after freezing may be mainly an after effect of the water imbibed during the pre-freezing stages. During frozen storage, the changes in texture observed by sensory methods on the cooked product were more in the washed sample indicating that the imbibed water or constituents washed out of the tissue play an important role in textural changes in prawn meat during frozen storage.

A method to preserve fish muscle pieces and mince from sciaenids

Fish muscle pieces and mince from sciaenids can be preserved for 72 and 48 h respectively at ambient temperature (34°C ± 4.5) in media containing 8% NaCl, 0.2% sodium benzoate and 0.5% potassium sorbate. Incorporation of 0.1% sodium bisulphite in this media slightly improved the texture and flavour of minced fish.

Texturised meat from low cost fish

A comparative study of the suitability of five species of fish, namely, threadfin bream (Nemipterous [sic] japonicus), cat fish (Tachysurus fella), ribbon fish (Trichiurus spp.), barracuda (Sphyraena jello) and jew fish (Pseudosciaena spp.) for the production of texturised meat has indicated that all these species are good source for the purpose. Protein content of the final product from all the species was higher than that prescribed for FPC type A. The product had excellent rehydration capacity and firm and elastic texture. No significant difference was observed in the rehydration capacity of the texturised meat from all the species studied. Salt concentration was found to influence the texture and salt content of 1.5 to 2% was found to result in the desirable firm and elastic texture. Rehydration capacity was not influenced to any significant extent by the salt content.

Species identification of family Lutjanidae and separation of populations of John’s snapper (Lutjanus johnii) in Persian Gulf and Oman Sea based on otolith shape analysis

The anatomical and morphometric (shape indices, contour descriptors and otolith weight) characterizations of sagittal otoliths were investigated in 13 species of Lutjanus spp. inhabiting the Persian Gulf. This is the first study that compares the efficiency of three different image analysis techniques for discriminating species based on the shape of the outer otolith contour, including elliptical Fourier descriptors (EFD), fast Fourier transform (FFT) and wavelet transform (WT). Sagittal otoliths of snappers are morphologically similar with some small specific variations. The use of otolith contour based on wavelets (WT) provided the best results in comparison with the two other methods based on Fourier descriptors, but only the combination of the all three methods (EFD, FFT and WT) was useful to obtain a robust classification of species. The species prediction improved when otolith weight was included. In relation to the shape indices, only the aspect ratio provided a clear grouping of species. Also, another study was carried on to test the possibility of application of shape analysis and comparing otolith contour of otoliths of Lutjanus johnii from Persian Gulf and Oman Sea to identify potential stocks. The results showed the otoliths have differences in contour shape and can be contribute to two different stocks.

Study of physicochemical, microbial and sensory properties of surimi produced from black mouth croaker (Atrobucca nibe) at freezing condition (-18ºC)

Black mouth croaker (Atrobucca nibe) is considered as a new valuable fish stock in the Oman Sea. In this study, surimi was manufactured from nonmarket size of the fish, manually and different cryoprotectant agents were added to the surimi. Finally changes in physiochemical, microbiological and sensory quality, characteristics of the surimi and kamaboko gel samples were assessed during 6 months at freezing storage (-18ºC). Surimi samples with the addition of Iranian tragacanth gum (TG), xanthan gum (XG), chitosan (CS) and whey protein concentrate (WPC) at 1% (w/w) were prepared to evaluate their impacts as a cryoprotectant on the surimi, individually. The results showed that the whiteness and lightness indexes in all surimi samples were gradually decreased during frozen storage. This trend of decreasing was more intensity in the control sample from 61.08±0.131 to 54.21±0.067 was recorded (p<0.05). Water holding capacity (WHC) in all treatments was decreased during 6 months. The lowest WHC (g/g) was obtained in the surimi without cryoprotectants and maximum WHC was measured in Tcs and Twpc samples, respectively (p<0.05). The lowest breaking force was calculated in Txg (166.00±22.627 g) and Tc (271.50±263.16 g) during 6 months at frozen storage, respectively (p<0.05), while Twpc treatment with slight variations showed the highest breaking force (p<0.05). Also, the lowest gel strength was obtained in Txg (68.22±6.740 g.cm) after 6 month of frozen storage (p<0.05). All Kamaboko surimi gels texture profile analysis parameters decreaced with increasing shelf life. This decreasing trend in the control sample was more severe. Floding results were reduced in all samples during storage (p<0.05). The best protective results probably were obtained in WPC, chitosan and commercial cryoprotectant agents, respectively due to protein stabilization of myofibrillar proteins and the protein-protein network structure, leading to the formation of surimi gel with strong textural properties during frozen conditions. The average number of surimi polygonal structures were significantly decreased (number per mm2) and their area were significantly increased (μm2) in all treatments (p<0.05). With increasing storage time, moisture, protein contents and pH were decreaced. Maximun TVB-N index was calculated in Tc (7.93±0.400 mg/100g) and Txg (7.88±0.477), respectively (p<0.05). TBRAs index was increased in all treatments during frozen storage, while this trend was reached in maximum value in Tc (p<0.05). Sensory evaluation of the fish finger quality characteristics (color, odor, texture and overall acceptability) preapare from frozen black mouth croaker surimi was decreaced during 6 month frozen storage. After the period of frozen storage the highest quality scores were measured in Twpc, Tcs and Tcc samples, respectively (p<0.05). In this study, coliform bacteria were not found in all treatments during frozen storage. The surimi sample containing chitosan showed lower mesophilic and psychrotropic bacteria (log cfu/g) than other treatments during frozen storage (p<0.05). Salt-soluble proteins extractions of all treatments were decreased during frozen storage. This decreacing trend was highest in Tcs (45.74±0.176%) and lowest in Tc treatments after 6 month of frozen storage (29.92±0.224%) (p<0.05). Although commercial cryoprotectant agents were successful in limiting the denaturation of proteins but sugar contents were not accepted for diabetics or those who disagree with the sweet taste and high calorie food. Hence, commercial cryoprotectant agents can be replaced with whey protein concentrate and chitosan at 1% level (w/w) consider that they were showed proper protection of the surimi myofibrillar proteins during storage.