Heavy metals as markers for assessing environmental pollution from chemical warehouse and plastics fires

Case histories of large, accidental fires are presented to illustrate that heavy metals may be used as markers to assess the extent of localized environmental contamination resulting from fires. Due to the complexity of fire chemistry with respect to organic pollutants, determination of organic pollutants in the environment following a fire would be time consuming and expensive. Using heavy metals as markers on the other hand is much cheaper and can be done very rapidly. © 1995.

Evaluation of the contamination level and proposal of remediation of soils in the basin of a processing plant of heavy metals, under a tropical climate, in Minas Gerais, Brazil

Indústrias metalúrgicas de produção de ligas metálicas podem por em risco toda a área envolvente, nomeadamente a qualidade das águas (superficiais e subterrâneas), dos solos e do ar, sempre que não existam infraestruturas e planos adequados de gestão destes resíduos. No caso em estudo, a unidade industrial situa-se na bacia do rio São Francisco, no estado brasileiro de Minas Gerais, e nos mais de quarenta anos de funcionamento tem produzido inúmeros problemas ambientais. Este estudo baseia-se nos primeiros resultados referentes aos solos da envolvente, tendo como objetivos a identificação dos principais contaminantes e a definição da área contaminada, de forma a avaliar a eficácia de projetos futuros de recuperação.

Thin mercury film electrodes in dynamic speciation studies of metals

No presente trabalho, foi avaliado o desempenho e a aplicabilidade do eléctrodo de filme fino de mercúrio, em estudos de especiação dinâmica de metais vestigiais. Para tal, foram utilizadas duas técnicas electroanalíticas de redissolução: a clássica Voltametria de Redissolução Anódica (ASV) e a recentemente desenvolvida, Cronopotenciometria de Redissolução com varrimento do potencial de deposição (SSCP). As propriedades de troca-iónica e de transporte de massa de películas mistas preparadas a partir de dois polímeros com características distintas, o Nafion (NA) e o 4-Poliestireno sulfonato de sódio (PSS), foram avaliadas, antes da sua aplicação no âmbito da especiação de metais. Estas películas de NA-PSS demonstraram uma elevada sensibilidade, reprodutibilidade, estabilidade mecânica, bem como, propriedades de anti-bloqueio adequadas na modificação química do eléctrodo de filme fino de mercúrio (TMFE) e, na sua aplicação na determinação de catiões metálicos vestigiais em amostras complexas, por ASV. Para além disso, o desempenho de membranas do polielectrólito PSS em estudos de voltametria de troca-iónica (IEV) foi estudado. O objectivo desta investigação foi reunir as condições ideais na preparação de películas de PSS estáveis e com uma densidade de carga negativa elevada, de modo a aumentar a acumulação electrostática de catiões metálicos no filme polimérico e por conseguinte, conseguir incrementos no sinal voltamétrico. O desempenho e aplicabilidade do TMFE em estudos de especiação de metais vestigiais foram extendidos à SSCP como técnica analítica. Dada a elevada sensibilidade e resolução evidenciada pelo TMFE, este revelou ser uma alternativa adequada aos eléctrodos de mercúrio convencionais, podendo ser utilizado durante um dia de trabalho, sem degradação aparente do sinal analítico de SCP. As curvas de SSCP obtidas experimentalmente utilizando o TMFE estavam em concordância com aquelas previstas pela teoria. Para além disso, a constante de estabilidade (K) calculada a partir do desvio do potencial de meia-onda, para dois sistemas metal-complexo lábeis, aproxima-se não só do valor teórico, como também daquele obtido utilizando o eléctrodo de mercúrio de gota suspensa (HMDE). Adicionalmente, o critério experimental de labilidade inerente a esta técnica foi validado e o grau de labilidade para um dado sistema metal-complexo foi determinado, utilizando o filme fino de mercúrio depositado sob um eléctrodo rotativo (TMF-RDE). Este eléctrodo é muito útil na determinação de parâmetros cinéticos, como é o caso da constante de velocidade de associação (ka), uma vez que as condições hidrodinâmicas, durante a etapa de deposição, se encontram bem definidas.

Toxicity assessment of essential metals in aquatic detritivores

Os contaminantes provenientes quer de fontes naturais quer como consequência da atividade humana, têm contribuído para a degradação dos ecossistemas aquáticos. Entre estes encontram-se os metais que podem, ou não ser essenciais mediante o papel que desempenham no metabolismo dos organismos. O cobre e o zinco são exemplos de metais essenciais, contudo quando atingem concentrações elevadas podem tornar-se tóxicos. Os detritívoros aquáticos desempenham um papel fundamental na decomposição da matéria orgânica, alimentando-se de carcaças e partes de plantas que caem nos cursos de água. Assim, estes organismos permitem que o ciclo dos nutrientes se complete e servem como elo de ligação entre todos os grupos funcionais do ecossistema mantendo o seu equilíbrio estrutural e funcional. Sendo a matéria orgânica a sua principal fonte de energia estão sujeitos à contaminação existente no meio, pelo que é de todo o interesse proceder-se à avaliação dos efeitos da toxicidade de metais nestes organismos. Uma vez que as diferenças comportamentais consequentes desta exposição podem originar variações na densidade e diversidade, o que se refletirá a nível das comunidades, originando alterações na estrutura e funcionamento do ecossistema. Tendo em vista a avaliação dos efeitos da contaminação por metais em detritívoros, o principal objetivo deste trabalho foi comparar a sensibilidade a metais essenciais de dois detritivoros aquáticos, o camarão Atyaephyra desmarestii e o anfípode Echinogammarus meridionalis. Para tal, avaliaram-se os efeitos do cobre e do zinco a diferentes níveis de organização biológica. Primeiro, foram determinadas as preferências alimentares de A. desmarestii e E. meridionalis considerando tanto a área das folhas como a contaminação por metais das folhas. Em seguida, avaliaram-se os efeitos do cobre e do zinco na sobrevivência e inibição alimentar de ambas as espécies. Finalmente, avaliaram-se os efeitos destes mesmos metais a nível bioquímico utilizando uma bateria de biomarcadores que incluiu enzimas de stresse oxidativo, o sistema de defesa antioxidante e as colinesterases. Ambos os organismos não mostraram preferência em relação a folhas de área diferente. A presença de uma maior ou menor concentração de metais essenciais no alimento não teve qualquer influência na sua escolha pelo alimento (contaminado ou não). Os ensaios agudos de cobre e zinco mostraram que o cobre é mais tóxico para ambas as espécies do que o zinco. O camarão demonstrou ser mais sensível ao zinco que o anfípode, tendo este sido mais sensível ao cobre ( CL50 do cobre para A. desmarestii foi de 0,128 mg.l-1 e o de E. meridionalis foi de 0,050 mg.l-1; os valores correspondentes para o zinco foram 7,951 e 11,860 mg.l-1, respectivamente. Em relação aos efeitos subletais, o cobre teve efeitos notórios na taxa de alimentação de E. meridionalis, mas não afectou a de A. desmarestii. No que diz respeito à exposição ao zinco, ambas as espécies parecem apresentar tendência para inibir a alimentação. A caracterização das colinesterases revelou que a principal forma presente em ambas as espécies é a acetilcolinesterase, a qual que não foi afetada pela presença dos metais, no caso do camarão, mas parece ser inibida pelo zinco no caso do anfípode. O cobre inibiu o sistema de defesa enzimático de ambas as espécies, sem sinais de danos lipídicos. Para além disto, inibiu uma das enzimas antioxidantes (GPx) do anfípode. Apesar de não ter ocorrido dano lipídico após exposição ao cobre, observou-se um ligeiro aumento dos níveis das LPO, o que pode ser indicativo de uma potencial existência de dano oxidativo, como resultado da falha do sistema de defesa antioxidante. Por outro lado, o zinco induziu o sistema de defesa em E. meriodionalis prevenindo o dano lipídico. Enquanto em A. desmarestii o sistema enzimático antioxidante não respondeu, tendo ocorrido dano celular oxidativo considerando-se, assim, que o sistema de defesa antioxidante do camarão pode ser comprometido por exposição a metais. Ainda que os danos celulares oxidativos tivessem ocorrido a baixas concentrações de zinco. A exposição a este metal também induziu a actividade da GST de E. meriodionalis. Considerando que a taxa de alimentação foi severamente reduzida no caso deste organismo, o zinco parece ser o metal cuja concentração no ecossistema requer maior atenção. Integrando as respostas dos biomarcadores parece também evidente que A. desmarestii responde de uma maneira geral a maiores concentrações dos dois metais, enquanto a resposta de E. meridionalis ocorre a concentrações inferiores. Pelo que, E. meridionalis parece ser mais sensível ao nível bioquímico. Neste trabalho, os dois detritívoros, com ligeiras diferenças no modo como utilizam a matéria orgânica disponível, apresentam diferenças na sensibilidade aos metais essenciais a vários níveis de organização biológica, sendo o zinco o metal que poderá causar maior preocupação a nível bioquímico, enquanto o cobre parece ser o mais tóxico ao nível do organismo, causando mortalidade a concentrações mais baixas.

Biology, ecology, population dynamics and distribution of metals in Sepia officinalis on a typical estuarine coastal lagoon - Ria de Aveiro

The common cuttlefish, Sepia officinalis, is a necto-benthic cephalopod that can live in coastal ecosystems, with high influence of anthropogenic pressures and thus be vulnerable to exposure to various types of contaminants. The cuttlefish is a species of great importance to the local economy of Aveiro, considering the global data of catches of this species in the Ria de Aveiro. However, studies on this species in Ria de Aveiro are scarce, so the present study aims to fill this information gap about the cuttlefish in the Ria de Aveiro. The cuttlefish enters Ria de Aveiro in the spring and summer to reproduce, returning to deeper waters in the winter. In terms of abundance, the eastern and center regions of the lagoon, closer to the sea, showed the highest values of abundance, while the northern and southern regions of the main channel had the lowest abundance. This fact may be related to abiotic factors, as well as depth, salinity and temperature. In the most southern point of the Ria de Aveiro (Areão) no cuttlefish was caught. This site had the lowest values of salinity and depth. The cuttlefish has an allometric the females being heavier than males to mantle lengths greater than 82.4 mm. Males reach sexual maturity first than females. In Ria de Aveiro in a generation of parents was found. The cuttlefish, presents itself as opportunistic predators, consuming a wide variety of prey from different taxa. The diet was similar in different sampling locations observing significant differences for the seasons. S. officinalis was captured at 10 sites in the Ria de Aveiro with different anthropogenic sources of contamination. Thus, levels of metals analyzed were similar at all sampling sites, with the exception of a restricted area, Laranjo, which showed higher values. The cuttlefish has the ability to accumulate metals in your body. The levels of Fe, Zn, Cu, Cd, Pb and Hg found in the digestive gland and mantle reflect a differential accumulation of metals in the tissues. This accumulation is related to the type and function of tissue analyzed and the type of metal analysis (essential and non-essential). The metal concentrations in the digestive gland are higher than in the mantle, with the exception of mercury. This may be due to the high affinity of the mantle for the incorporation of methylmercury (MeHg), the most abundant form of mercury. The accumulation of metals can vary over a lifetime, depending on the metal. The concentrations of Zn, Cd and Hg increases throughout life, while Pb decreases and essential metals such as Fe and Cu remain constant. The data collected suggest that the cuttlefish (Sepia officinalis) can be used as a bioindicator of environmental contamination for some metals.

Derivation of soil screening values for metals in Portuguese natural soil

The increasing human activity has been responsible by profound changes and a constinuos degradation of the soil compartment in all the European territory. Some European policies are appearing focusing soil’s protection and the management of contaminated sites, in order to recover land for other uses. To regulate the risk assessment and the management of contaminated soils, many European member states adopted soil guideline values, as for example soil screnning values (SSV).These values are particularly useful for the the first tier of the Ecological Risk Assessment (ERA) processes of contaminated sites,especially for a first screening of sites requiring a more site-specific evaluation. Hence, the approriate definition of regional SSVs will have relevant economic impacts in the management of contaminated sites. Portugal is one of European Member States that still lack these soil guideline values. In this context, this study gaves a remarkable contribution in the generation of ecotoxicological data for soil microbiological parameters, terrestrial plants and invertebrates for the derivation of SSVs for uranium (U), cadmium (Cd) and copper (Cu), using a Portuguese natural soil, representative of a dominant type of soil in the Portuguese territory. SSVs were derived based on two methods proposed by the the Technical Guidance Document for Risk Assessment of the European Commission; namely the assessment factor method (AF) and the species sensitivity distribution (SSD) method (with some adaptations). The outputs of both methods were compared and discussed. Further, this study laid the foundation for a deeper reflection about the cut-off (hazard concentration for a given percentage of species - HCps) to be estimated from the SSDs, and to be selected for the derivation of SSVs, with the adequate level of protection. It was proven that this selection may vary for different contaminants, however a clear justification should be given, in each case. The SSvs proposed in this study were for: U (151.4 mg U kg-1dw), Cd (5.6 mg Cd kg-1dw), and Cu (58.5 mg Cu kg-1dw) These values should now be tested for their descriminating power of soils with different levels of contamination. However, this studies clarifies the approach that should be followed for the derivation of SSVs for other metals and organic contaminants, and for other dominant types of Portuguese natural soils.

Containing precious metals: hallmarking, minting and the materiality of gold and silver in medieval and modern England.

This book chapter extends the argument constructed by Oakley in his conference paper ‘Containing gold: Institutional attempts to define and constrict the values of precious metal objects’ presented at ‘Itineraries of the Material’, a conference held at Goethe Universitaet, Frankfurt am Main in 2011. Oakley’s chapter investigates the social forces that define the identities, social pathways and physical movement of objects made of precious metal. It presents a case study in which constitutive substance rather than the conceptual object is the key driver behind the social trajectories of numerous artefacts and their reception by contemporary audiences. This supports the main contention of the book as a whole: the need to reconsider, and when necessary challenge, the dominance of the social biography of objects in the study of material culture. Oakley’s research used historical and ethnographic approaches, including three years’ of ethnographic field research in the jewellery industry. This included training as a precious metal assayer at the Birmingham Assay Office and observing the industry and public response to government proposals to abolish the hallmarking legislation. This fieldwork was augmented by archive, library and object collection research on the histories of assaying and goldsmithing. Oakley presents an analysis of the historical development and contemporary social relevance of hallmarking, a technological process that has never previously been subject to ethnographic study, yet is fundamental to one of the UK’s creative industries.

Bio-removal of toxic metals by metal resistant anaerobic bacteria: molecular characterization and performance studies

Tese de dout., Ciências Biotecnológicas (Biotecnologia Ambiental), Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2010

Sources and transport of surface sediment and metals in B.C. fjord, Tahsis Inlet

Senior thesis written for Oceanography 445

Cleanup of industrial effluents containing heavy metals: a new opportunity of valorising the biomass produced by brewing industry

Heavy metal pollution is a matter of concern in industrialised countries. Contrary to organic pollutants, heavy metals are not metabolically degraded. This fact has two main consequences: its bioremediation requires another strategy and heavy metals can be indefinitely recycled. Yeast cells of Saccharomyces cerevisiae are produced at high amounts as a by-product of brewing industry constituting a cheap raw material. In the present work, the possibility of valorising this type of biomass in the bioremediation of real industrial effluents containing heavy metals is reviewed. Given the autoaggregation capacity (flocculation) of brewing yeast cells, a fast and off-cost yeast separation is achieved after the treatment of metal-laden effluent, which reduces the costs associated with the process. This is a critical issue when we are looking for an effective, eco-friendly, and low-cost technology. The possibility of the bioremediation of industrial effluents linked with the selective recovery of metals, in a strategy of simultaneous minimisation of environmental hazard of industrial wastes with financial benefits from reselling or recycling the metals, is discussed.

Assessment of heavy metals in the surroundings of coal-fired power plant

This paper aims to survey metal concentrations in soils in the vicinity of a coal-firedpower plant located in southwest of Portugal. Two annual sampling campaigns were carried out to measure a hypothetical soil contamination around the coal plant. The sampling area was divided into two subareas, both centered in the emission source, delimited by two concentric circles with radius of 6 km and 20 km. About 40 samplings points were defined in the influence area. Metals measurements were performed with a portable analytical X-ray dispersive energy fluorescence spectrometer identifying about 20 different elements in each sampling point. The most relevant elements measured included As, Cu, Fe, Hg, Pb, Ti and Zn in both sampling areas. Considering the results obtained in the first sampling campaign, arsenic is predominantly higher within the 6-20 km sampling area. The second sampling campaign showed that both sampling areas presented relatively similar metal concentrations except for Fe, Mn, Sr and Zn which concentration is higher within the 6-20 km sampling area. Also, As, Fe, Mn and Ti concentrations decreased significantly from the first to the second sampling campaign and their concentration were predominately higher in the NE-E and E-SE directions.

GFRP waste reinforced polymer mortars: a new waste management solution for GFRP scrap material

To date, glass fibre reinforced polymer (GFRP) waste recycling is very limited and restricted by thermoset nature of binder matrix and lack of economically viable enduse applications for the recyclates. In this study, efforts were made in order to recycle grinded GFRP waste proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, a mix of powdered and fibrous materials, were incorporated into polyester based mortars as fine aggregate and filler replacements, at different load contents (between 4% up to 12% of total mass) and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Test results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse in concrete-polymer composites.

Trace metals in size-fractionated particulate matter in a Portuguese hospital: exposure risks assessment and comparisons with other countries

Hospitals are considered as a special and important type of indoor public place where air quality has significant impacts on potential health outcomes. Information on indoor air quality of these environments, concerning exposures to particulate matter (PM) and related toxicity, is limited though. This work aims to evaluate risks associated with inhalation exposure to ten toxic metals and chlorine (As, Ni, Cr, Cd, Pb, Mn, Se, Ba, Al, Si, and Cl) in coarse (PM2.5–10) and fine (PM2.5) particles in a Portuguese hospital in comparison with studies representative of other countries. Samples were collected during 1 month in one urban hospital; elemental PM characterization was determined by proton-induced X-ray emission. Noncarcinogenic and carcinogenic risks were assessed according to the methodology provided by the United States Environmental Protection Agency (USEPA; Region III Risk-Based Concentration Table) for three different age categories of hospital personnel (adults, >20, and <65 years) and patients (considering nine different age groups, i.e., children of 1–3 years to seniors of >65 years). The estimated noncarcinogenic risks due to occupational inhalation exposure to PM2.5-bound metals ranged from 5.88×10−6 for Se (adults, 55–64 years) to 9.35×10−1 for As (adults, 20–24 years) with total noncarcinogenic risks (sum of all metals) above the safe level for all three age categories. As and Cl (the latter due to its high abundances) were the most important contributors (approximately 90 %) to noncarcinogenic risks. For PM2.5–10, noncarcinogenic risks of all metals were acceptable to all age groups. Concerning carcinogenic risks, for Ni and Pb, they were negligible (<1×10−6) in both PM fractions for all age groups of hospital personnel; potential risks were observed for As and Cr with values in PM2.5 exceeding (up to 62 and 5 times, respectively) USEPA guideline across all age groups; for PM2.5–10, increased excess risks of As and Cr were observed particularly for long-term exposures (adults, 55–64 years). Total carcinogenic risks highly (up to 67 times) exceeded the recommended level for all age groups, thus clearly showing that occupational exposure to metals in fine particles pose significant risks. If the extensive working hours of hospital medical staff were considered, the respective noncarcinogenic and carcinogenic risks were increased, the latter for PM2.5 exceeding the USEPA cumulative guideline of 10−4. For adult patients, the estimated noncarcinogenic and carcinogenic risks were approximately three times higher than for personnel, with particular concerns observed for children and adolescents.

Impact of multi-metals (Cd, Pb and Zn) exposure on the physiology of the yeast Pichia kudriavzevii

Metal contamination of the environment is frequently associated to the presence of two or more metals. This work aimed to study the impact of a mixture of metals (Cd, Pb and Zn) on the physiology of the non-conventional yeast Pichia kudriavzevii. The incubation of yeast cells with 5 mg/l Cd, 10 mg/l Pb and 5 mg/l Zn, for 6 h, induced a loss of metabolic activity (assessed by FUN-1 staining) and proliferation capacity (evaluated by a clonogenic assay), with a small loss of membrane integrity (measured by trypan blue exclusion assay). The staining of yeast cells with calcofluor white revealed that no modification of chitin deposition pattern occurred during the exposure to metal mixture. Extending for 24 h, the exposure of yeast cells to metal mixture provoked a loss of membrane integrity, which was accompanied by the leakage of intracellular components. A marked loss of the metabolic activity and the loss of proliferation capacity were also observed. The analysis of the impact of a single metal has shown that, under the conditions studied, Pb was the metal responsible for the toxic effect observed in the metal mixture. Intracellular accumulation of Pb seems to be correlated with the metals' toxic effects observed.