Does Lost Time Cost You Money and Create High Risk?

The aim of the case study is to express the delayed repair time impact on the revenues and profit in numbers with the example of the outage of power plant units. Main steps of risk assessment: • creating project plan suitable for risk assessment • identification of the risk factors for each project activities • scenario-analysis based evaluation of risk factors • selection of the critical risk factors based on the results of quantitative risk analysis • formulating risk response actions for the critical risks • running Monte-Carlo simulation [1] using the results of scenario-analysis • building up a macro which creates the connection among the results of the risk assessment, the production plan and the business plan.

Estimation of average annual daily traffic (AADT) using geographically weighted regression (GWR) method and geographic information system (GIS)

Annual average daily traffic (AADT) is important information for many transportation planning, design, operation, and maintenance activities, as well as for the allocation of highway funds. Many studies have attempted AADT estimation using factor approach, regression analysis, time series, and artificial neural networks. However, these methods are unable to account for spatially variable influence of independent variables on the dependent variable even though it is well known that to many transportation problems, including AADT estimation, spatial context is important. ^ In this study, applications of geographically weighted regression (GWR) methods to estimating AADT were investigated. The GWR based methods considered the influence of correlations among the variables over space and the spatially non-stationarity of the variables. A GWR model allows different relationships between the dependent and independent variables to exist at different points in space. In other words, model parameters vary from location to location and the locally linear regression parameters at a point are affected more by observations near that point than observations further away. ^ The study area was Broward County, Florida. Broward County lies on the Atlantic coast between Palm Beach and Miami-Dade counties. In this study, a total of 67 variables were considered as potential AADT predictors, and six variables (lanes, speed, regional accessibility, direct access, density of roadway length, and density of seasonal household) were selected to develop the models. ^ To investigate the predictive powers of various AADT predictors over the space, the statistics including local r-square, local parameter estimates, and local errors were examined and mapped. The local variations in relationships among parameters were investigated, measured, and mapped to assess the usefulness of GWR methods. ^ The results indicated that the GWR models were able to better explain the variation in the data and to predict AADT with smaller errors than the ordinary linear regression models for the same dataset. Additionally, GWR was able to model the spatial non-stationarity in the data, i.e., the spatially varying relationship between AADT and predictors, which cannot be modeled in ordinary linear regression. ^

Risk factors of type 2 diabetes and cardiovascular diseases among Jamaican adolescents

Purpose. The purpose of the study was to examine Jamaican adolescents in a school setting, for risk factors of type 2 diabetes mellitus (T2DM) and cardiovascular diseases (CVDs). Methods. A descriptive epidemiological cross-sectional study of 276 Jamaican adolescents (112 males and 164 females) ages 14-19 years (15.6±1.2), randomly selected from grades 9-12 from ten high schools on the island. Thirteen risk factors were examined. Risk factors were compared with BMI levels and demographics. A sub-study validated finger prick testing of fasting blood glucose, total cholesterol, and HbA1c versus venous testing in 59 subjects. Results. Prevalence of overweight was 33.0% (n=91) with mean BMI of 23.74±7.74. Approximately 66.7% of subjects reported ≥ 3 risk factors. The number of T2DM and CVDs risk factors increased for subjects with BMI above 25. One third of the overweight subjects were classified with the metabolic syndrome. High BMI was associated with high waist circumference (r = .767, p < .01), high waist-to-hip ratio (r = .180, p < .01), presence of Acanthosis Nigricans (r = .657, p < .01), high total cholesterol (r = .158, p < .01), family history of T2DM (r = .157, p < .01), and hypertension (r = .422, p < .01). Regression analyses significantly predicted gender and physical activity (p < .001), and total number of risk factors for T2DM and CVDs (p < .001). Paired samples t-tests revealed no significant differences between methods of testing for TC and HbA1c (p < .01) but not for FBG (p > .05). Percentage bias for the methods of blood testing met the reference standards for fasting blood glucose but not for total cholesterol and HbA1c. Bland Altman tests of agreement between the two methods indicated good agreement for all three tests. Conclusion. Jamaican adolescents are at high risk for T2DM and CVDs as seen in other study populations. Effective programs to prevent T2DM and CVDs are needed. Family history of diseases, anthropometric measures, and gender identified more subjects at risk than did the biochemical measures. Comparison between finger prick and venous blood methods suggested that finger prick is an adequate method to screen for risk factors in children and adolescents.

A comprehensive study of bankruptcy prediction: Accounting ratios, market variables, and microstructure

Bankruptcy prediction has been a fruitful area of research. Univariate analysis and discriminant analysis were the first methodologies used. While they perform relatively well at correctly classifying bankrupt and nonbankrupt firms, their predictive ability has come into question over time. Univariate analysis lacks the big picture that financial distress entails. Multivariate discriminant analysis requires stringent assumptions that are violated when dealing with accounting ratios and market variables. This has led to the use of more complex models such as neural networks. While the accuracy of the predictions has improved with the use of more technical models, there is still an important point missing. Accounting ratios are the usual discriminating variables used in bankruptcy prediction. However, accounting ratios are backward-looking variables. At best, they are a current snapshot of the firm. Market variables are forward-looking variables. They are determined by discounting future outcomes. Microstructure variables, such as the bid-ask spread, also contain important information. Insiders are privy to more information that the retail investor, so if any financial distress is looming, the insiders should know before the general public. Therefore, any model in bankruptcy prediction should include market and microstructure variables. That is the focus of this dissertation. The traditional models and the newer, more technical models were tested and compared to the previous literature by employing accounting ratios, market variables, and microstructure variables. Our findings suggest that the more technical models are preferable, and that a mix of accounting and market variables are best at correctly classifying and predicting bankrupt firms. Multi-layer perceptron appears to be the most accurate model following the results. The set of best discriminating variables includes price, standard deviation of price, the bid-ask spread, net income to sale, working capital to total assets, and current liabilities to total assets.

Reliability analysis of encapsulation methods for lead -based paint through an accelerated life testing

The adverse health effects of long-term exposure to lead are well established, with major uptake into the human body occurring mainly through oral ingestion by young children. Lead-based paint was frequently used in homes built before 1978, particularly in inner-city areas. Minority populations experience the effects of lead poisoning disproportionately. ^ Lead-based paint abatement is costly. In the United States, residents of about 400,000 homes, occupied by 900,000 young children, lack the means to correct lead-based paint hazards. The magnitude of this problem demands research on affordable methods of hazard control. One method is encapsulation, defined as any covering or coating that acts as a permanent barrier between the lead-based paint surface and the environment. ^ Two encapsulants were tested for reliability and effective life span through an accelerated lifetime experiment that applied stresses exceeding those encountered under normal use conditions. The resulting time-to-failure data were used to extrapolate the failure time under conditions of normal use. Statistical analysis and models of the test data allow forecasting of long-term reliability relative to the 20-year encapsulation requirement. Typical housing material specimens simulating walls and doors coated with lead-based paint were overstressed before encapsulation. A second, un-aged set was also tested. Specimens were monitored after the stress test with a surface chemical testing pad to identify the presence of lead breaking through the encapsulant. ^ Graphical analysis proposed by Shapiro and Meeker and the general log-linear model developed by Cox were used to obtain results. Findings for the 80% reliability time to failure varied, with close to 21 years of life under normal use conditions for encapsulant A. The application of product A on the aged gypsum and aged wood substrates yielded slightly lower times. Encapsulant B had an 80% reliable life of 19.78 years. ^ This study reveals that encapsulation technologies can offer safe and effective control of lead-based paint hazards and may be less expensive than other options. The U.S. Department of Health and Human Services and the CDC are committed to eliminating childhood lead poisoning by 2010. This ambitious target is feasible, provided there is an efficient application of innovative technology, a goal to which this study aims to contribute. ^

Risk factors of type 2 diabetes and cardiovascular diseases among Jamaican adolescents

Purpose: The purpose of the study was to examine Jamaican adolescents in a school setting, for risk factors of type 2 diabetes mellitus (T2DM) and cardiovascular diseases (CVDs). Methods: A descriptive epidemiological cross-sectional study of 276 Jamaican adolescents (112 males and 164 females) ages 14-19 years (15.6±1.2), randomly selected from grades 9-12 from ten high schools on the island. Thirteen risk factors were examined. Risk factors were compared with BMI levels and demographics. A sub-study validated finger prick testing of fasting blood glucose, total cholesterol, and HbAlc versus venous testing in 59 subjects. Results: Prevalence of overweight was 33.0% (n=91) with mean BMI of 23.74±7.74. Approximately 66.7% of subjects reported > 3 risk factors. The number of T2DM and CVDs risk factors increased for subjects with BMI above 25. One third of the overweight subjects were classified with the metabolic syndrome. High BMI was associated with high waist circumference (r =.767, p (r = .180, p.05). Percentage bias for the methods of blood testing met the reference standards for fasting blood glucose but not for total cholesterol and HbAlc. Bland Altman tests of agreement between the two methods indicated good agreement for all three tests. Conclusion: Jamaican adolescents are at high risk for T2DM and CVDs as seen in other study populations. Effective programs to prevent T2DM and CVDs are needed. Family history of diseases, anthropometric measures, and gender identified more subjects at risk than did the biochemical measures. Comparison between finger prick and venous blood methods suggested that finger prick is an adequate method to screen for risk factors in children and adolescents.

Computational fluid dynamics (CFD) based approach to consequence assessment of accidental release of hydrocarbon during storage and transportation

This thesis investigated the risk of accidental release of hydrocarbons during transportation and storage. Transportation of hydrocarbons from an offshore platform to processing units through subsea pipelines involves risk of release due to pipeline leakage resulting from corrosion, plastic deformation caused by seabed shakedown or damaged by contact with drifting iceberg. The environmental impacts of hydrocarbon dispersion can be severe. Overall safety and economic concerns of pipeline leakage at subsea environment are immense. A large leak can be detected by employing conventional technology such as, radar, intelligent pigging or chemical tracer but in a remote location like subsea or arctic, a small chronic leak may be undetected for a period of time. In case of storage, an accidental release of hydrocarbon from the storage tank could lead pool fire; further it could escalate to domino effects. This chain of accidents may lead to extremely severe consequences. Analyzing past accident scenarios it is observed that more than half of the industrial domino accidents involved fire as a primary event, and some other factors for instance, wind speed and direction, fuel type and engulfment of the compound. In this thesis, a computational fluid dynamics (CFD) approach is taken to model the subsea pipeline leak and the pool fire from a storage tank. A commercial software package ANSYS FLUENT Workbench 15 is used to model the subsea pipeline leakage. The CFD simulation results of four different types of fluids showed that the static pressure and pressure gradient along the axial length of the pipeline have a sharp signature variation near the leak orifice at steady state condition. Transient simulation is performed to obtain the acoustic signature of the pipe near leak orifice. The power spectral density (PSD) of acoustic signal is strong near the leak orifice and it dissipates as the distance and orientation from the leak orifice increase. The high-pressure fluid flow generates more noise than the low-pressure fluid flow. In order to model the pool fire from the storage tank, ANSYS CFX Workbench 14 is used. The CFD results show that the wind speed has significant contribution on the behavior of pool fire and its domino effects. The radiation contours are also obtained from CFD post processing, which can be applied for risk analysis. The outcome of this study will be helpful for better understanding of the domino effects of pool fire in complex geometrical settings of process industries. The attempt to reduce and prevent risks is discussed based on the results obtained from the numerical simulations of the numerical models.

Measuring the impact of a quality improvement collaboration to decrease maternal mortality in a Ghanaian regional hospital.

OBJECTIVE: To evaluate the performance of a continuous quality improvement collaboration at Ridge Regional Hospital, Accra, Ghana, that aimed to halve maternal and neonatal deaths. METHODS: In a quasi-experimental, pre- and post-intervention analysis, system deficiencies were analyzed and 97 improvement activities were implemented from January 2007 to December 2011. Data were collected on outcomes and implementation rates of improvement activities. Severity-adjustment models were used to calculate counterfactual mortality ratios. Regression analysis was used to determine the association between improvement activities, staffing, and maternal mortality. RESULTS: Maternal mortality decreased by 22.4% between 2007 and 2011, from 496 to 385 per 100000 deliveries, despite a 50% increase in deliveries and five- and three-fold increases in the proportion of pregnancies complicated by obstetric hemorrhage and hypertensive disorders of pregnancy, respectively. Case fatality rates for obstetric hemorrhage and hypertensive disorders of pregnancy decreased from 14.8% to 1.6% and 3.1% to 1.1%, respectively. The mean implementation score was 68% for the 97 improvement processes. Overall, 43 maternal deaths were prevented by the intervention; however, risk severity-adjustment models indicated that an even greater number of deaths was averted. Mortality reduction was correlated with 26 continuous quality improvement activities, and with the number of anesthesia nurses and labor midwives. CONCLUSION: The implementation of quality improvement activities was closely correlated with improved maternal mortality.

Predicting 10-year risk of fatal cardiovascular disease in Germany: an update based on the SCORE-Deutschland Risk Charts

Estimation of absolute risk of cardiovascular disease (CVD), preferably with population-specific risk charts, has become a cornerstone of CVD primary prevention. Regular recalibration of risk charts may be necessary due to decreasing CVD rates and CVD risk factor levels. The SCORE risk charts for fatal CVD risk assessment were first calibrated for Germany with 1998 risk factor level data and 1999 mortality statistics. We present an update of these risk charts based on the SCORE methodology including estimates of relative risks from SCORE, risk factor levels from the German Health Interview and Examination Survey for Adults 2008-11 (DEGS1) and official mortality statistics from 2012. Competing risks methods were applied and estimates were independently validated. Updated risk charts were calculated based on cholesterol, smoking, systolic blood pressure risk factor levels, sex and 5-year age-groups. The absolute 10-year risk estimates of fatal CVD were lower according to the updated risk charts compared to the first calibration for Germany. In a nationwide sample of 3062 adults aged 40-65 years free of major CVD from DEGS1, the mean 10-year risk of fatal CVD estimated by the updated charts was lower by 29% and the estimated proportion of high risk people (10-year risk > = 5%) by 50% compared to the older risk charts. This recalibration shows a need for regular updates of risk charts according to changes in mortality and risk factor levels in order to sustain the identification of people with a high CVD risk.

Personalized absolute benefit of statin treatment for primary or secondary prevention of vascular disease in individual elderly patients

Objective: To estimate the absolute treatment effect of statin therapy on major adverse cardiovascular events (MACE; myocardial infarction, stroke and vascular death) for the individual patient aged C70 years. Methods: Prediction models for MACE were derived in patients aged C70 years with (n = 2550) and without (n = 3253) vascular disease from the ‘‘PROspective Study of Pravastatin in Elderly at Risk’’ (PROSPER) trial and validated in the ‘‘Secondary Manifestations of ARTerial disease’’ (SMART) cohort study (n = 1442) and the ‘‘Anglo-Scandinavian Cardiac Outcomes Trial-Lipid Lowering Arm’’ (ASCOT-LLA) trial (n = 1893), respectively, using competing risk analysis. Prespecified predictors were various clinical characteristics including statin treatment. Individual absolute risk reductions (ARRs) for MACE in 5 and 10 years were estimated by subtracting ontreatment from off-treatment risk. Results: Individual ARRs were higher in elderly patients with vascular disease [5-year ARRs: median 5.1 %, interquartile range (IQR) 4.0–6.2 %, 10-year ARRs: median 7.8 %, IQR 6.8–8.6 %] than in patients without vascular disease (5-year ARRs: median 1.7 %, IQR 1.3–2.1 %, 10-year ARRs: 2.9 %, IQR 2.3–3.6 %). Ninetyeight percent of patients with vascular disease had a 5-year ARR C2.0 %, compared to 31 % of patients without vascular disease. Conclusions: With a multivariable prediction model the absolute treatment effect of a statin on MACE for individual elderly patients with and without vascular disease can be quantified. Because of high ARRs, treating all patients is more beneficial than prediction-based treatment for secondary prevention of MACE. For primary prevention of MACE, the prediction model can be used to identify those patients who benefit meaningfully from statin therapy.

Measuring the Diversity and the Integration of Film Production in Mercosur: A Social Network Analysis

Based on an original and comprehensive database of all feature fiction films produced in Mercosur between 2004 and 2012, the paper analyses whether the Mercosur film industry has evolved towards an integrated and culturally more diverse market. It provides a summary of policy opportunities in terms of integration and diversity, emphasizing the limiter role played by regional policies. It then shows that although the Mercosur film industry remains rather disintegrated, it tends to become more integrated and culturally more diverse. From a methodological point of view, the combination of Social Network Analysis and the Stirling Model opens up interesting research tracks to analyse creative industries in terms of their market integration and their cultural diversity.

Pseudoneglect and visual attention networks

Pseudoneglect represents the tendency for healthy individuals to show a slight but consistent bias in favour of stimuli appearing in the left visual field. The bias is often measured using variants of the line bisection task. An accurate model of the functional architecture of the visuospatial attention system must account for this widely observed phenomenon, as well as for modulation of the direction and magnitude of the bias within individuals by a variety of factors relating to the state of the participant and/or stimulus characteristics. To date, the neural correlates of pseudoneglect remain relatively unmapped. In the current thesis, I employed a combination of psychophysical measurements, electroencephalography (EEG) recording and transcranial direct current stimulation (tDCS) in an attempt to probe the neural generator(s) of pseudoneglect. In particular, I wished to utilise and investigate some of the factors known to modulate the bias (including age, time-on-task and the length of the to-be-bisected line) in order to identify neural processes and activity that are necessary and sufficient for the lateralized bias to arise. Across four experiments utilising a computerized version of a perceptual line bisection task, pseudoneglect was consistently observed at baseline in healthy young participants. However, decreased line length (experiments 1, 2 and 3), time-on-task (experiment 1) and healthy aging (experiment 3) were all found to modulate the bias. Specifically, all three modulations induced a rightward shift in subjective midpoint estimation. Additionally, the line length and time-on-task effects (experiment 1) and the line length and aging effects (experiment 3) were found to have additive relationships. In experiment 2, EEG measurements revealed the line length effect to be reflected in neural activity 100 – 200ms post-stimulus onset over source estimated posterior regions of the right hemisphere (RH: temporo-parietal junction (TPJ)). Long lines induced a hemispheric asymmetry in processing (in favour of the RH) during this period that was absent in short lines. In experiment 4, bi-parietal tDCS (Left Anodal/Right Cathodal) induced a polarity-specific rightward shift in bias, highlighting the crucial role played by parietal cortex in the genesis of pseudoneglect. The opposite polarity (Left Cathodal/Right Anodal) did not induce a change in bias. The combined results from the four experiments of the current thesis provide converging evidence as to the crucial role played by the RH in the genesis of pseudoneglect and in the processing of visual input more generally. The reduction in pseudoneglect with decreased line length, increased time-on-task and healthy aging may be explained by a reduction in RH function, and hence contribution to task processing, induced by each of these modulations. I discuss how behavioural and neuroimaging studies of pseudoneglect (and its various modulators) can provide empirical data upon which accurate formal models of visuospatial attention networks may be based and further tested.

Assessment of naproxen adsorption on bone char in aqueous solutions using batch and fixed-bed processes

An integrated analysis of naproxen adsorption on bone char in batch and packed-bed column conditions has been performed. Kinetic, thermodynamic and breakthrough parameters have been calculated using adsorption models and artificial neural networks. Results show that naproxen removal using bone char in batch conditions is a feasible and effective process, which could involve electrostatic and non-electrostatic interactions depending mainly on pH conditions. However, the application of packed-bed column for naproxen adsorption on bone char is not effective for the treatment of diluted solutions due to the low degree of adsorbent utilization (below 4%) at tested operating conditions. The proposed mechanism for naproxen removal using bone char could include a complexation process via phosphate and naproxen, hydrogen bonding and the possibility of hydrophobic interactions via π–π electron. This study highlights the relevance of performing an integrated analysis of adsorbent effectiveness in batch and dynamic conditions to establish the best process configuration for the removal of emerging water pollutants such as pharmaceuticals.

Relación entre la calificación de los elementos de un sistema de gestión y los indicadores de accidentalidad en empresas del sector de la construcción en Colombia

El presente estudio tiene como objetivo determinar la relación que existe entre la implementación de un sistema de gestión de seguridad y salud en el trabajo (SGSST), y la frecuencia y la severidad de la accidentalidad en la industria de la construcción en Colombia. Para ello se seleccionaron 35 empresas que realizan actividades relacionadas con la edificación, infraestructura e interventoría, que hubiesen implementado un SGSST para la intervención de los riesgos de accidentes y que contaran con la evaluación del mismo. La evaluación del SGSST está enmarcada en cinco dimensiones o criterios: planeación, política, implementación, manejo integral del accidente y revisión por la gerencia. Cada una evaluada a través de diferentes requisitos y se presentan en una escala de 1 a 10, siendo 10 el nivel más alto del cumplimiento por requisito. Teniendo los resultados de esta calificación, la tasa (proporción entre los accidentes reportados y los trabajadores de cada empresa) y los días de incapacidad (ausentismo por accidente de trabajo), se realizó un análisis de las medidas descriptivas consolidado por las empresas del estudio: tendencia central y dispersión para número de trabajadores, tasa de accidentalidad, días de incapacidad y el resultado de los totales de cada criterio de la evaluación y el gran total. Para estudiar la relación entre los resultados de la evaluación y los indicadores de tasa y días, se llevó a cabo un análisis de correlación y regresión lineal entre los indicadores de accidentalidad y los resultados de las puntuaciones de los criterios. Esta correlación se realizó tanto para la primera evaluación como para la segunda. En las dos mediciones las correlaciones fueron negativas mostrando que existe una disminución en la tasa de accidentalidad y días de incapacidad entre una evaluación y la otra. En el análisis de regresión, en la primera evaluación por cada unidad que aumentó la calificación global, se presentó una reducción de la tasa de frecuencia de 0.140. En la segunda evaluación por cada unidad que aumentó la calificación global, la tasa se redujo en 0.159. Ambos hallazgos soportan la necesidad de implementar un SGSST para ayudar a reducir el número inaceptable de lesiones y enfermedades en la industria de la construcción.