The mitochondrial and autosomal mutation landscapes of prostate cancer

BACKGROUND: Prostate cancer (PCa) is the most common cancer in men. PCa is strongly age associated; low death rates in surveillance cohorts call into question the widespread use of surgery, which leads to overtreatment and a reduction in quality of life. There is a great need to increase the understanding of tumor characteristics in the context of disease progression.

OBJECTIVE: To perform the first multigenome investigation of PCa through analysis of both autosomal and mitochondrial DNA, and to integrate exome sequencing data, and RNA sequencing and copy-number alteration (CNA) data to investigate how various different tumor characteristics, commonly analyzed separately, are interconnected.

DESIGN, SETTING, AND PARTICIPANTS: Exome sequencing was applied to 64 tumor samples from 55 PCa patients with varying stage and grade. Integrated analysis was performed on a core set of 50 tumors from which exome sequencing, CNA, and RNA sequencing data were available.

OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS: Genes, mutated at a significantly higher rate relative to a genomic background, were identified. In addition, mitochondrial and autosomal mutation rates were correlated to CNAs and proliferation, assessed as a cell cycle gene expression signature.

RESULTS AND LIMITATIONS: Genes not previously reported to be significantly mutated in PCa, such as cell division cycle 27 homolog (Saccharomyces cerevisiae) (CDC27), myeloid/lymphoid or mixed-lineage leukemia 3 (MLL3), lysine (K)-specific demethylase 6A (KDM6A), and kinesin family member 5A (KIF5A) were identified. The mutation rate in the mitochondrial genome was 55 times higher than that of the autosomes. Multilevel analysis demonstrated a tight correlation between high reactive-oxygen exposure, chromosomal damage, high proliferation, and in parallel, a transition from multiclonal indolent primary PCa to monoclonal aggressive disease. As we only performed targeted sequence analysis; copy-number neutral rearrangements recently described for PCa were not accounted for.

CONCLUSIONS: The mitochondrial genome displays an elevated mutation rate compared to the autosomal chromosomes. By integrated analysis, we demonstrated that different tumor characteristics are interconnected, providing an increased understanding of PCa etiology.

The effect of the 'Gait keeper' mutation in the DMRT3 gene on gaiting ability in Icelandic horses

A nonsense mutation in DMRT3 ('Gait keeper' mutation) has a predominant effect on gaiting ability in horses, being permissive for the ability to perform lateral gaits and having a favourable effect on speed capacity in trot. The DMRT3 mutant allele (A) has been found in high frequency in gaited breeds and breeds bred for harness racing, while other horse breeds were homozygous for the wild-type allele (C). The aim of this study was to evaluate further the effect of the DMRT3 nonsense mutation on the gait quality and speed capacity in the multigaited Icelandic horse and demonstrate how the frequencies of the A- and C- alleles have changed in the Icelandic horse population in recent decades. It was confirmed that homozygosity for the DMRT3 nonsense mutation relates to the ability to pace. It further had a favourable effect on scores in breeding field tests for the lateral gait tölt, demonstrated by better beat quality, speed capacity and suppleness. Horses with the CA genotype had on the other hand significantly higher scores for walk, trot, canter and gallop, and they performed better beat and suspension in trot and gallop. These results indicate that the AA genotype reinforces the coordination of ipsilateral legs, with the subsequent negative effect on the synchronized movement of diagonal legs compared with the CA genotype. The frequency of the A-allele has increased in recent decades with a corresponding decrease in the frequency of the C-allele. The estimated frequency of the A-allele in the Icelandic horse population in 2012 was 0.94. Selective breeding for lateral gaits in the Icelandic horse population has apparently altered the frequency of DMRT3 genotypes with a predicted loss of the C-allele in relatively few years. The results have practical implications for breeding and training of Icelandic horses and other gaited horse breeds.

An optimized reverse-phase high performance liquid chromatographic method for evaluating percutaneous absorption of glucosamine hydrochloride

A relatively simple, selective, precise and accurate high performance liquid chromatography (HPLC) method based on a reaction of phenylisothiocyanate (PITC) with glucosamine (GL) in alkaline media was developed and validated to determine glucosamine hydrochloride permeating through human skin in vitro. It is usually problematic to develop an accurate assay for chemicals traversing skin because the excellent barrier properties of the tissue ensure that only low amounts of the material pass through the membrane and skin components may leach out of the tissue to interfere with the analysis. In addition, in the case of glucosamine hydrochloride, chemical instability adds further complexity to assay development. The assay, utilising the PITC-GL reaction was refined by optimizing the reaction temperature, reaction time and PITC concentration. The reaction produces a phenylthiocarbamyl-glucosamine (PTC-GL) adduct which was separated on a reverse-phase (RP) column packed with 5 microm ODS (C18) Hypersil particles using a diode array detector (DAD) at 245 nm. The mobile phase was methanol-water-glacial acetic acid (10:89.96:0.04 v/v/v, pH 3.5) delivered to the column at 1 ml min-1 and the column temperature was maintained at 30 degrees C. Galactosamine hydrochloride (Gal-HCl) was used as an internal standard. Using a saturated aqueous solution of glucosamine hydrochloride, in vitro permeation studies were performed at 32+/-1 degrees C over 48 h using human epidermal membranes prepared by a heat separation method and mounted in Franz-type diffusion cells with a diffusional area 2.15+/-0.1 cm2. The optimum derivatisation reaction conditions for reaction temperature, reaction time and PITC concentration were found to be 80 degrees C, 30 min and 1% v/v, respectively. PTC-Gal and GL adducts eluted at 8.9 and 9.7 min, respectively. The detector response was found to be linear in the concentration range 0-1000 microg ml-1. The assay was robust with intra- and inter-day precisions (described as a percentage of relative standard deviation, %R.S.D.) <12. Intra- and inter-day accuracy (as a percentage of the relative error, %RE) was <or=-5.60 and <or=-8.00, respectively. Using this assay, it was found that GL-HCl permeates through human skin with a flux 1.497+/-0.42 microg cm-2 h-1, a permeability coefficient of 5.66+/-1.6x10(-6) cm h-1 and with a lag time of 10.9+/-4.6 h.

SnaPshot based genotyping of the RYR1 mutation in Portuguese breeds of pigs

The porcine stress syndrome or malignant hyperthermia is an inherited autosomic recessive disease, which results in neuromuscular disorders leading to death in homozygous individuals and is associated with deterioration of meat quality. The defect in susceptible animals results from modifications in the calcium release channel or Ryanodine Receptor (RYR1), with a mutation leading to a C to T transition in nucleotide 1843 of the gene. The objective of this work was to develop a method based on analysis of SNPs to detect the mutation described in the RYR1 locus in pigs, and study polymorphisms of the gene in four exotic (Large White, Landrace, Duroc and Pietrain) and three native (Bísaro, Alentejano and Malhado de Alcobaça) breeds of pigs in Portugal. The method was successful in identifying the mutation by analysis of SNPs, and results indicate a high incidence of the mutant allele in Pietrain (0.75) and, to a lesser degree, in Malhado de Alcobaça (0.34) and Landrace (0.28); frequencies in Alentejano, Bísaro and Large White ranged between 0.04 and 0.09. These results suggest the need to establish breeding programs aimed at eliminating the susceptibility allele from those populations.

Evolution and functional relevance of Ataxin-3 paralogues

O gene ataxin-3 (ATXN3; 14q32.1) codifica uma proteína expressa ubiquamente, envolvida na via ubiquitina-proteassoma e na repressão da transcrição. Grande relevância tem sido dada ao gene ATXN3 após a identificação de uma expansão (CAG)n na sua região codificante, responsável pela ataxia mais comum em todo o mundo, SCA3 ou doença de Machado-Joseph (DMJ). A DMJ é uma doença neurodegenerativa, autossómica dominante, de início tardio. O tamanho do alelo expandido explica apenas uma parte do pleomorfismo da doença, evidenciando a importância do estudo de outros modificadores. Em doenças de poliglutaminas (poliQ), a toxicidade é causada por um ganho de função da proteína expandida; no entanto, a proteína normal parece ser, também, um dos agentes modificadores da patogénese. O gene ATXN3 possui dois parálogos humanos gerados por retrotransposição: ataxin-3 like (ATXN3L) no cromossoma X, e LOC100132280, ainda não caracterizado, no cromossoma 8. Estudos in vitro evidenciaram a capacidade da ATXN3L para clivar cadeias de ubiquitina, sendo o seu domínio proteolítico mais eficiente do que o domínio da ATXN3 parental. O objetivo deste estudo foi explorar a origem e a evolução das retrocópias ATXN3L e LOC100132280 (aqui denominadas ATXN3L1 e ATXN3L2), assim como testar a relevância funcional de ambas através de abordagens evolutivas e funcionais. Deste modo, para estudar a divergência evolutiva dos páralogos do gene ATXN3: 1) analisaram-se as suas filogenias e estimou-se a data de origem dos eventos de retrotransposição; 2) avaliaram-se as pressões seletivas a que têm sido sujeitos os três parálogos, ao longo da evolução dos primatas; e 3) explorou-se a evolução das repetições CAG, localizadas em três contextos genómicos diferentes, provavelmente sujeitos a diferentes pressões seletivas. Finalmente, para o retrogene que conserva uma open reading frame (ORF) intacta, ATXN3L1, analisou-se, in silico, a conservação dos locais e domínios proteicos da putativa proteína. Ademais, para este retrogene, foi estudado o padrão de expressão de mRNA, através da realização de PCR de Transcriptase Reversa, em 16 tecidos humanos. Os resultados obtidos sugerem que dois eventos independentes de retrotransposição estiveram na origem dos retrogenes ATXN3L1 e ATXN3L2, tendo o primeiro ocorrido há cerca de 63 milhões de anos (Ma) e o segundo após a divisão Platirrínios-Catarrínios, há cerca de 35 Ma. Adicionalmente, outras retrocópias foram encontradas em primatas e outros mamíferos, correspondendo, no entanto, a eventos mais recentes e independentes de retrotransposição. A abordagem evolutiva mostrou a existência de algumas constrições selectivas associadas à evolução do gene ATXN3L1, à semelhança do que acontece com ATXN3. Por outro lado, ATXN3L2 adquiriu codões stop prematuros que, muito provavelmente, o tornaram num pseudogene processado. Os resultados da análise de expressão mostraram que o gene ATXN3L1 é transcrito, pelo menos, em testículo humano; no entanto, a optimização final da amplificação específica dos transcriptos ATXN3L1 permitirá confirmar se a expressão se estende a outros tecidos. Relativamente ao mecanismo de mutação inerente à repetição CAG, os dois parálogos mostraram diferentes padrões de evolução: a retrocópia ATXN3L1 é altamente interrompida e pouco polimórfica, enquanto a ATXN3L2 apresenta tratos puros de (CAG)n em algumas espécies e tratos hexanucleotídicos de CGGCAG no homem e no chimpanzé. A recente aquisição da repetição CGGCAG pode ter resultado de uma mutação inicial de CAG para CGG, seguida de instabilidade que proporcionou a expansão dos hexanucleótidos.Estudos futuros poderão ser realizados no sentido de confirmar o padrão de expressão do gene ATXN3L1 e de detetar proteína endógena in vivo. Adicionalmente, a caracterização da proteina ataxina-3 like 1 e dos seus interatores moleculares poderá povidenciar informação acerca da sua relevância no estado normal e patológico.

Detection of MegaTAL-induced HIV pol Mutation By Droplet Digital PCR

Thesis (Master's)--University of Washington, 2015

RT-Bst: an integrated approach for reverse transcription and enrichment of cDNA from viral RNA

The synthesis of cDNA from RNA is challenging due to the inefficiency of reverse transcription (RT). In order to address this, a method was developed known as RT-Bst for sequential RT of RNA and Bst DNA polymerase amplification for enrichment of cDNA in a single tube reaction. Using genomic RNA from bacteriophage MS2, the yield of cDNA produced by RT alone and RT-Bst were compared by analysis of PCR-amplified products. Using random primers a superior performance was observed when amplifying MS2 RNA following RT-Bst compared to RT alone, indicating that greater quantities of cDNA were present after RT-Bst. RT-Bst was also compared with RT alone for their relative ability to produce sufficient cDNA to amplify 8 target regions spanning the respiratory syncytial virus (RSV) genome. Six out of 8 targets were amplified consistently by PCR subsequent to RT-Bst amplification whereas only 3 out of 8 targets could be amplified after RT alone. RSV sequences were selectively amplified using RSV specific primers from a mixed template containing an excess of MS2 RNA in a RT-Bst reaction without amplifying MS2 sequences. This suggests that RT-Bst can be used to amplify RNA sequences non-specifically using random primers and specifically using sequence specific primers and enhances the yield of cDNA when compared to RT alone.

Strength improvement of adhesively-bonded joints using a reverse-bent geometry

Adhesive bonding of components has become more efficient in recent years due to the developments in adhesive technology, which has resulted in higher peel and shear strengths, and also in allowable ductility up to failure. As a result, fastening and riveting methods are being progressively replaced by adhesive bonding, allowing a big step towards stronger and lighter unions. However, single-lap bonded joints still generate substantial peel and shear stress concentrations at the overlap edges that can be harmful to the structure, especially when using brittle adhesives that do not allow plasticization in these regions. In this work, a numerical and experimental study is performed to evaluate the feasibility of bending the adherends at the ends of the overlap for the strength improvement of single-lap aluminium joints bonded with a brittle and a ductile adhesive. Different combinations of joint eccentricity were tested, including absence of eccentricity, allowing the optimization of the joint. A Finite Element stress and failure analysis in ABAQUS® was also carried out to provide a better understanding of the bent configuration. Results showed a major advantage of using the proposed modification for the brittle adhesive, but the joints with the ductile adhesive were not much affected by the bending technique.

Reverse problem-based learning - a case study with a Braille machine

Engineering Education includes not only teaching theoretical fundamental concepts but also its verification during practical lessons in laboratories. The usual strategies to carry out this action are frequently based on Problem Based Learning, starting from a given state and proceeding forward to a target state. The possibility or the effectiveness of this procedure depends on previous states and if the present state was caused or resulted from earlier ones. This often happens in engineering education when the achieved results do not match the desired ones, e.g. when programming code is being developed or when the cause of the wrong behavior of an electronic circuit is being identified. It is thus important to also prepare students to proceed in the reverse way, i.e. given a start state generate the explanation or even the principles that underlie it. Later on, this sort of skills will be important. For instance, to a doctor making a patient?s story or to an engineer discovering the source of a malfunction. This learning methodology presents pedagogical advantages besides the enhanced preparation of students to their future work. The work presented on his document describes an automation project developed by a group of students in an engineering polytechnic school laboratory. The main objective was to improve the performance of a Braille machine. However, in a scenario of Reverse Problem-Based learning, students had first to discover and characterize the entire machine's function before being allowed (and being able) to propose a solution for the existing problem.