Estabilidade sagital da condiloplastia associada à cirurgia ortognática para o tratamento do osteocondroma mandibular

The aim of this study was to evaluate the stability of the conservative condylectomy technique and articular disc repositioning as the surgical treatment approach for management of mandibular condylar osteochondroma, with appropriate Orthognathic surgery. Fifteen patients (12 females and 3 males), average age of 32.3 years (range, 13 to 56 years), with unilateral active osteochondroma of the mandibular condyle were analyzed. All patients underwent conservative condylectomy, recontouring of the remaining condylar neck stump and articular disc repositioned and indicated orthognatic surgical procedures. Average post surgical follow-up was 19 months. Each patient's lateral cephalograms were traced at 3 intervals (presurgery, immediate post surgery and long-term follow-up). Immediate after surgery the oclusal plane angle decreased -2.8 ± 4.5o, the maxillomandibular complex rotated counter-clockwise with advancement at menton 5.3 ± 5.6 mm, pogonion 5.0 ± 5.1 mm, B point 3.4 ± 4.2 mm and A point 1.0 ± 1.5 mm. The long-term follow-up showed significant changes in overbite (-0.6 ± 0.5 mm) and SNGoMe (0,93° ± 1,53°). Horizontally and vertically small instabilities occurred in Me (-1.21 ± 1.94 mm) and PNS (-1.48 ± 1.67 mm) respectively. The treatment protocol studied produced counterclockwise rotation and maxillofacial mandibular advancement. The long-term follow-up showed solid dental and skeletal stability with horizontal instability of Me and PNS in the vertical direction.

Variáveis que afetam o procedimento de colagem direta ortodôntica: braquetes e materiais adesivos

Following the introduction of the acid-etching technique in enamel surface, direct attachment of orthodontic appliances on the surface of the tooth and/or restorations became a routine procedure in the assembly of the fixed devices. The attainment of a success result is related to the criterion attention to the details and the steps of the bonding technique, as well as, to the knowledge of the characteristics of the adhesive materials and orthodontic brackets. This paper presents some aspects of various types of brackets and adhesives materials.

Variáveis que afetam o procedimento de colagem direta ortodôntica: procedimentos clinicos

Direct bonding of orthodontics attachments to the teeth or restoration has become a routine in fixed appliance therapy. The technique used seems to be simple, but meticulous attention to detail and steps, a thorough understanding of factors involved are needed to ensure a successful outcome into different surfaces. It is the purpose of this article to review concerning aspects to orthodontic bonding in enamel and restorations fabricated from different materials; affording assistance to the reader wiser accomplishment and successful procedure.

Associação da raspagem com antibioticoterapia em um caso de periodontite agressiva generalizada

The treatment of aggressive periodontitis is a challenge to the clinician, therefore the search for effective treatment protocols of this disease is important. The aim of this case report was demonstrate the effectiveness of the combination of systemic antibiotics with non-surgical periodontal therapy in the treatment of generalized aggressive periodontitis. a 27-year-old patient (RCS), smoker for 11 years (10 cigarettes/day on average), with no systemic alteration, attended the periodontal clinic with a complaint abnormal dental position. After the clinical examination, the diagnosis of generalized aggressive periodontitis was defined. The non-surgical periodontal treatment was executed associated with administration of amoxicillin plus metronidazole for ten days. Clinical parameters (Clinical Attachment level, marginal gingival level, periodontal probing depth, bleeding on probing, plaque index and gingival index) and radiographic parameters (distance between the cemento-enamel junction and the bone crest) were evaluated before and after non-surgical periodontal treatment, after antibiotic therapy and three, six and 12 months after the treatment. After one year follow-up, the results showed improvement in clinical and radiographic parameters with stabilized and decreased tooth mobility and absence of tooth loss. It was concluded that the association of non-surgical periodontal therapy with the administration of amoxicillin/metronidazole was effective in the treatment of generalized aggressive periodontitis.

Efeito do ângulo de trabalho do ultrassom e do jato de bicarbonato sobre as superfícies ranculares

The aim of this study was to evaluate the effect of the working angle variation of the magnetoestritive ultrasonic (MU) and air polishing devices (APD) on the roughness and wear of dental root. Fifty bovine incisive teeth were used in this study. The proximal surfaces of the teeth were divided in three regions: coronal, median, and an apical. The coronal region was treated with a manual scaler, the apical region was treated with APD or with a MU and the medium region was maintained untreated to serve as a control. The teeth were divided in 11 groups according to the treatment applied: MU-0º; MU-30º; MU-45º; MU-60º; MU-90º; AP-0º; AP-30º; AP-45º; AP-60º; AP-90º; MS: manual scaler. To the statistical analysis, data submitted to the Anova and Tukey's test (p < 0.05). The manual curette promotes less roughness and higher tooth wear in comparison with the both ultrasonic and air polishing devices (p < 0.05). The angles of 45º, 60º and 90º caused higher rate of tooth wear and roughness when the MU was used (p < 0.05), while the angle of 90° caused a higher tooth wear than the angle of 30° when the APD was used (p < 0.05). The working angle variation influenced the tooth wear and roughness promoted by MU, whereas when using APD, the working angle variation influenced only the tooth wear.

Próteses parciais removíveis associadas a encaixes: implicações clínicas e laboratoriais

Nowadays, the fixed partial dentures and/or dental implants is the most requested treatmentby the majority of partially edentulous patients. However, depending on the periodontal condition of the remaining teeth, as well as the bone condition of the prosthetic space, the oral rehabilitation with these treatments may be limited or even contraindicated. In such cases, the use of removable partial dentures associated to attachments becomes an important alternative for aesthetic and functional rehabilitation. Attachments are mechanical devices consisted of two parts (patrix-matrix), one placed inside another, which act as direct retainer, providing retention, support and stability to the dentures. These devices can be classified as intra or extracoronal attachments, considering their position in relation to the abutment tooth. However, regardless the type of attachment, the association between fixed and removable partial dentures should be performed respecting the biomechanical principles of both. Therefore, the purpose of this study was to review and discuss the literature about the clinical and laboratory implications of the association between fixed and removable partial dentures by means of attachments.

Air abrasion before and/or after zirconia sintering: surface characterization, flexural strength, and resin cement bond strength

The purpose of this in vitro study was to evaluate the effect of air-abrasion/zirconia sintering order on the yttria partially stabilized tetragonal zirconia polycrystal (Y-TZP) surface characterization (roughness, morphology, and phase transformation), flexural strength (FS), and shear bond strength (SBS) to a resin cement. Y-TZP specimens were air abraded with 50-μm Al2O3 particles after (AS), before (BS), or before and after zirconia sintering (BAS). For roughness (Ra), 30 block specimens (12×12×3.0 mm; n=10) had their surfaces analyzed by a profilometer. Next, on the air-abraded surfaces of these specimens, composite resin discs (n=30) were bonded with RelyX ARC. The bonded specimens were stored for 24 hours in distilled water at 37°C before shear testing. Failure mode was determined with a stereomicroscope (20×). The surface morphology (n=2) was evaluated by SEM (500×). For the four-point flexural strength test (EMIC DL2000), 39 bar-shaped specimens (20×4.0×1.2 mm; n=13) were air abraded according to the three conditions proposed, and an additional group (nonabraded) was evaluated (n=13). The quantitative analysis of phase transformation (n=1) was completed with Rietveld refinement with X-ray diffraction data. Ra (μm) and SBS (MPa) data were analyzed by one-way analysis of variance (ANOVA) and the Tukey test (α=0.05). Pearson correlation analysis was used to determine if there was a correlation between roughness and SBS. For FS (MPa) data, one-way ANOVA and the Dunnett C-test (α=0.05) were used. The air-abrasion/zirconia sintering order influenced significantly (p<0.001) Ra, SBS, and FS. The BS and AS groups presented the highest (1.3 μm) and the lowest (0.7 μm) Ra. The highest SBS (7.0 MPa) was exhibited by the BAS group, followed by the AS group (5.4 MPa) and finally by the BS group (2.6 MPa). All groups presented 100% adhesive failure. A weak correlation (r=−0.45, p<0.05) was found between roughness and SBS. The air-abrasion/zirconia sintering order provided differences in the surface morphology. The nonabraded (926.8 MPa) and BS (816.3 MPa) groups exhibited statistically similar FS values but lower values than the AS (1249.1 MPa) and BAS (1181.4 MPa) groups, with no significant difference between them. The nonabraded, AS, BS, and BAS groups exhibited, respectively, percentages of monoclinic phase of 0.0 wt%, 12.2 wt%, 0.0 wt%, and 8.6 wt%. The rougher surface provided by the air-abrasion before zirconia sintering may have impaired the bonding with the resin cement. The morphological patterns were consistent with the surface roughness. Considering the short-term SBS and FS, the BAS group exhibited the best performance. Air abrasion, regardless of its performance order, provides tetragonal to monoclinic transformation, while sintering tends to zero the monoclinic phase content.

Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramic

Statement of problem Because zirconia is a glass-free material, alternative surface treatments such as airborne-particle abrasion or silica coating should be used for long-term bonding. However, these surface treatments in combination with different bonding agents and luting cements have not yet been studied. Purpose The purpose of the study was to evaluate the effect of surface treatments on the shear bond strength (SBS) of luting cements to Y-TZP ceramic. Material and methods Zirconia disks (N=240) were airborne-particle abraded with the following particles (n=48): 50 μm Al2O3; 120 μm Al2O3; 30 μm silica-coated Al2O3 (Rocatec Soft); 120 μm Al2O3+110 μm silica-coated Al2O3 (Rocatec Plus); and Rocatec Plus. After silanization of the zirconia surface, composite resin disks were bonded with (n=12) RelyX Luting 2; RelyX ARC; RelyX U100; and Panavia F. The bonded specimens were thermocycled (10 000 cycles) and tested for SBS. Failure mode was determined with a stereomicroscope (×20). The morphology and elemental composition of airborne-particle abraded surfaces were evaluated with scanning electron microscopy (×500) and energy-dispersive x-ray spectroscopy (×50). Results Surface treatments, cements, and their interaction were significant (P<.001). For RelyX ARC, Rocatec Soft and Rocatec Plus provided the highest SBS. In general, surface treatments did not influence the SBS of RelyX U100 and Panavia F. Regardless of the cement, no significant difference was found between 50 μm and 120 μm Al2O3 particles, between Rocatec Soft and Rocatec Plus, or between Rocatec Plus and 120 μm Al2O3 particles+Rocatec Plus. All groups showed adhesive failures. Different particle sizes provided differences in morphological patterns. The elemental composition comprised Al and Al/Si for alumina and silica-abraded zirconia. Conclusions Particle size did not influence the SBS of the groups abraded exclusively with alumina or silica-coated particles. RelyX ARC was more surface-treatment dependent than RelyX U100 or Panavia F.

Clareamento para dentes despolpados: revisão de literatura e considerações

The esthetics of the teeth is not a privilege of our days, because concerns in that effect have been reported since 1860. Faced with an endodontically treated tooth that presents any type of color change, professionals can use intracoronary bleaching, which is more conservative attempt to restore the normal color of teeth. Bleaching aims to remove pigments by oxidizing agents and for that, various techniques were developed. Among the risks of tooth whitening the external resorption is the most severe, which occurs when the whitening penetrates through the dentin tubules to the periodontal ligament and initiates an inflammatory response. To prevent external resorption is required to place an intracoronal bleaching barrier. It is important to know the time between the bleaching treatment for restoring procedure for getting a good sealing to prevent microleakage. This study aims to review the literature about the different types of bleaching agents and their risks.

Tratamento estético periodontal: revisão de literatura sobre alguns tipos de cirurgias

Currently, periodontal aesthetics has been prized for harmony of the smile. The clinical crown lengthening, gingival excess or altered passive eruption, is effectively corrected by periodontal surgery. The purpose of this paper is to show, through a literature review, some types of surgery on clinical crown lengthening and root coverage. Clinical crown lengthening is done to Change the size of the anterior teeth and to optimize the cosmetic result of treatment with new coronal restoration and other cosmetic dental care. In general, the treatment plan and the choice of operative technique begin with careful clinical examination. Recessions tissue can be defined as a displacement of the gingival margin toward the junction mucogingival exposing the root surface. These, when present, impacting on patient comfort by providing the occurrence of cervical dentin hypersensitivity, and the esthetic, the amendment of the gum line. Successful treatment of recessions is based on knowledge of its etiology and assessment of predictability of surgical techniques that aim to root coverage. Through literature review, we can conclude that the types of surgery most often used are: 1) to increase the clinical crown, gingivectomy, flap surgery and gingivoplasty osteotomy, and 2) for root coverage, the use will depend on the amount of gum keratinized and especially the classification of Miller.

Coroas estéticas anteriores em cerâmica metal-free: relato de caso clínico

Society's change of parameters for health and aesthetics has resulted in an increased demand for dental treatments. Nowadays, ceramics systems have shown a substantial development, becoming more reliable and predictable. Dental ceramics, besides being chemically stable, present excellent optical properties when compared to dental structures, thus assuring a special position in the list of aesthetic restorative materials. OBJECTIVE, CASE REPORT AND CONCLUSION: This article describes a successful clinical procedure involving the anterior teeth aesthetics, which were restored with all-ceramic crowns (IPS e.max® Ivoclar Vivadent).

A arte de copiar: restauração estética anterior

Atualmente, os pacientes buscam cada vez mais estética, e o profissional deve ser capaz de suprir a necessidade da demanda atual. Para isso, os profissionais devem estar atentos a não somente devolver funcionalidade a seus procedimentos restauradores, mas acima de tudo buscar excelência estética. Entre esses procedimentos, as restaurações adesivas diretas são capazes de mimetizar o que é artificial, tornando as restaurações naturais. Esse artigo tem o objetivo de expor uma sequência clínica, de certa maneira simplificada, em que o profissional conseguiu uma restauração altamente estética.

Associação de prótese fixa, implantes e estética periodontal para reabilitação de pacientes parcialmente edêntulos

Periodontitis is a chronic inflammatory disease that results in the destruction of teeth and their supporting tissues with subsequent tooth loss. The replacement of missing teeth for implant-supported restorations has proven to be a highly predictable treatment method with good long-term prognosis. However, some consequences of tooth loss prevents dental implant placement in an ideal position, where regenerative procedures are necessary for this type of rehabilitation. Less invasive procedures such as conventional prosthesis emerge as a therapeutic option in cases where there is enough bone structure for implants and patient´s non-acceptance for invasive procedures. Thus, this paper aims to present the resolution of rehabilitation through a noninvasive and multidisciplinary treatment. One female patient referred to the clinic presented maladaptive bilateral mandibular fixed prostheses, endodontic lesions, gingival recession, and root sensitivity. For proper resolution of this case, an association among osseointegrated implants, fixed partial prosthesis, tooth extraction, and aesthetic periodontal procedures with the use of subepithelial connective tissue graft was proposed. After two years, the patient shows excellent aesthetics and chewing. Within the limits of this scenario, this paper discusses the various factors that may affect the choice of a particular treatment modality for the rehabilitation of edentulous single spaces.

Reabilitação estética funcional associando onlays em cerômero e resinas nanoparticuladas

Introdução: a perda da dimensão vertical de oclusão (DVO) é resultada de um grande desequilíbrio oclusal, onde não apenas a perda dos dentes pode ser o fator responsável, mas também as parafunções, entre elas, o bruxismo. O restabelecimento da relação maxilomandibular é condição necessária para que uma adequada reabilitação bucal seja executada, devolvendo, assim, função e estética perdidas. Objetivo: descrever um caso clínico de reabilitação em paciente bruxista, com presença de desgastes dentários, desgastes de tratamentos restauradores previamente existentes, fratura de onlay e bordas incisais, restabelecendo uma nova DVO por meio de onlays posteriores em cerômeros, recuperando a estética com restaurações diretas em resinas compostas nos dentes anteriores. Conclusões: a reabilitação bucal com levante de mordida em onlays devolve a DVO perdida de maneira segura.