Physical activity levels of Hungarian children during school recess

Objective : The purpose of this study was to examine physical activity levels and patterns of physical activity across daily school recess periods, and the contribution of recess to daily physical activity.

Method : Ninety-eight children (61% boys) from three schools in Hungary had their physical activity quantified using uni-axial accelerometry every 5 s for three consecutive school days (Wednesday to Friday). The proportion of time spent in sedentary, light, moderate-to-vigorous, and vigorous physical activity during 5 daily school recess periods was determined using existing age-appropriate cut-points. The relative contribution of recess to daily moderate-to-vigorous physical activity was also determined. Data were collected between May and October 2008.

Results : Boys engaged in significantly more light (30.6 ± 5.2%; 27.7 ± 5.1%), moderate-to-vigorous (24.9 ± 8.9%; 17.5 ± 5.2%) and vigorous physical activity (7.6 ± 4.7%; 4.3 ± 2.9%) than girls during recess. Girls (54.8 ± 8.1%) engaged in more sedentary activity than boys (44.5 ± 10.2%). Physical activity levels were generally similar across multiple recess periods. Recess contributed more moderate-to-vigorous physical activity towards weekday physical activity for boys (13.1%) than girls (10.8%).

Conclusions : Since sedentary activity accounted for the largest proportion of recess, interventions may be needed across all recess periods to promote physical activity during the school day.

Physical activity levels of normal-weight and overweight girls and boys during primary school recess

Objective: This study aimed to compare moderate-to-vigorous physical activity (MVPA) and vigorous physical activity (VPA) in normal-weight and overweight boys and girls during school recess.

Research Methods and Procedures: Four hundred twenty children, age 6 to 10 years, were randomly selected from 25 schools in England. Three hundred seventy-seven children completed the study. BMI was calculated from height and weight measurements, and heart rate reserve thresholds of 50% and 75% reflected children's engagement in MVPA and VPA, respectively.

Results: There was a significant main effect for sex and a significant interaction between BMI category and sex for the percent of recess time spent in MVPA and VPA. Normal-weight girls were the least active group, compared with overweight boys and girls who were equally active. Fifty-one boys and 24 girls of normal weight achieved the 40% threshold; of these, 30 boys and 10 girls exceeded 50% of recess time in MVPA. Eighteen overweight boys and 22 overweight girls exceeded the 40% threshold, whereas 8 boys and 8 girls exceeded the 50% threshold.

Discussion: Overweight boys were significantly less active than their normal-weight male counterparts; this difference did not hold true for girls. Even though nearly double the number of normal-weight children achieved the 40% of MVPA during recess compared with overweight children, physical activity promotion in school playgrounds needs to be targeted not only at overweight but at other health parameters, as 40 overweight children met the 40% MVPA target proposed for recess

Physical activity levels of children during school playtime

School represents a suitable setting for intervention programmes aiming to promote physical activity to benefit health. During the school day, physical education and school playtime offer children regular opportunities to engage in physical activity. However, there is growing concern that, internationally, curricular time allocated to physical education is not meeting statutory guidelines. The effectiveness of the playground environment to promote physical activity has been considered as a complementary setting to physical education.

Physical activity guidelines state that children should engage in at least 1 hour of moderate intensity physical activity a day. Currently no empirically tested guidelines exist for physical activity levels during playtime. However, studies cited in this article indicate that playtime can contribute between 5-40% of recommended daily physical activity levels when no interventions have been utilised.

The limited school-based investigations that have been reported in the literature suggest that boys engage in more physical activity during playtime than girls. Studies that have implemented intervention strategies in order to promote physical activity levels indicate that playtime can substantially contribute towards daily optimal physical activity guidelines. Energy expenditure and physical activity levels have increased during playtime following the implementation of playtimebased interventions. In order to advance knowledge of children's physical activity during playtime, a number of key issues for consideration in future research are detailed. Research on children's use of playtime to be physically active and the extent of the contribution of playtime to daily physical activity guidelines is warranted.

The enhancement of lithium ion dissociation in polyelectrolyte gels on the addition of ceramic nano-fillers

Nano-particle oxide fillers including TiO₂, SiO₂ and Al₂O₃ have previously been shown to have a significant affect on the properties of both polymer and polymer gel electrolytes. In some cases, conductivity increases of one order of magnitude have been reported in crystalline PEO–base complexes. In this work, we report the effects of TiO₂ and SiO₂ on a poly(Li-AMPS)-based gel polyelectrolyte. Impedance spectroscopy and pfg-NMR spectroscopy indicates an increase in the number of available charge carriers with the addition of filler. An ideal amount of ceramic filler has been identified, with additional filler only saturating the system and reducing the conductivity below that of the pristine polyelectrolyte system. SEM micrographs suggest a model whereby the filler interacts readily with the sulfonate group; the surface area of the filler being an important factor.

Effect of organic additives on the cycling performances of lithium metal polymer cells

Gel polymer electrolytes were prepared by immersing a porous poly(vinylidene fluoride-co-hexafluoropropylene) membrane in an electrolyte solution containing small amounts of organic additive. Three kinds of organic compounds, thiophene, 3,4-ethylenedioxythiophene and biphenyl, were used as a polymerizable monomeric additive. The organic additives were found to be electrochemically oxidized to form conductive polymer films on the electrode at high potential. By using the gel polymer electrolytes containing different organic additive, lithium metal polymer cells, composed of lithium anode and LiCoO2 cathode, were assembled and their cycling performance evaluated. Adding small amounts of a suitable polymerizable additive to the gel polymer electrolyte was found to reduce the interfacial resistance in the cell during cycling, and it thus exhibited less capacity fade and better high rate performance. Differential scanning calorimetric studies showed that the thermal stability of the fully charged LiCoO2 cathode was improved in the cell containing an organic additive.

Cycling performance of lithium metal polymer cells assembled with ionic liquid and poly(3-methyl thiophene)/carbon nanotube composite cathode

A poly(3-methylthiophene) (PMT)/multi-walled carbon nanotube (CNT) composite is synthesized by in situ chemical polymerization. The PMT/CNT composite is used as an active cathode material in lithium metal polymer cells assembled with ionic liquid (IL) electrolytes. The IL electrolyte consists of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF4) and LiBF4. A small amount of vinylene carbonate is added to the IL electrolyte to prevent the reductive decomposition of the imidazolium cation in EMIBF4. A porous poly(vinylidene fluoride-co-hexafluoropropylene) (P(VdF-co-HFP)) film is used as a polymer membrane for assembling the cells. Electrochemical properties of the PMT/CNT composite electrode in the IL electrolyte are evaluated and the effect of vinylene carbonate on the cycling performance of the lithium metal polymer cells is investigated. The cells assembled with a non-flammable IL electrolyte and a PMT/CNT composite cathode are promising candidates for high-voltage–power sources with enhanced safety.

Ceramic-polymer interface in composite electrolytes of lithium aluminium titanium phosphate and polyetherurethane polymer electrolyte

Composite electrolytes of the lithium-ion-conducting ceramic Li_1.3Al_0.3Ti_1.7(PO₄)₃ and polyetherurethane/lithium triflate polymer electrolyte have been prepared. Microscopy has shown that adhesion between the ceramic and polymer phases is poor, with gaps up to 1 μm at the interface. When dry, the composites are no more conductive than the pure polymer electrolyte. Exposing the samples to the vapour of solvents such as DMF, acetonitrile or water produces a significant increase in conductivity, over and beyond simple plasticization of the polymer. Pretreating the ceramic with a compatibilizing agent improves adhesion at the interface with the polymer, but decreases overall conductivity in the case investigated.

Solid state NMR characterization of lithium conducting ceramics

⁷Li solid state NMR has been used to characterize lithium aluminium titanium phosphate and lithium lanthanum titanate ceramics. Both materials have high ionic mobilities at room temperature and this is reflected in their static ⁷Li powder patterns. In the case of the phosphate based ceramic, a narrow Lorentzian peak is observed above 300 K, which narrows further with increasing temperature. The accompanying quadrupolar structure, with C_Q (quadrupolar coupling constant) ~ 40 kHz, suggests that the lithium ions are hopping rapidly between equivalent, high electric field gradient sites. The ²⁷Al and ³¹P magic angle spinning (MAS) spectra reveal an asymmetric phosphorus peak and two distinct aluminium resonances. The room temperature powder pattern of Li_0.33La_0.57TiO₃ shows a dipolar broadened peak which narrows quite suddenly at 310 K revealing quadrupolar satellites with C_Q ~ 900 Hz. A second lithium site is also observed in this material, as indicated by a further, weaker quadrupolar structure (C_Q ~ 40 kHz).

On the role of cyclic unsaturated additives on the behaviour of lithium metal electrodes in ionic liquid electrolytes

Three cyclic vinyl based additives, based respectively on oxygen, sulphur and fluorine, are tested for their ability to improve the cycling of lithium in a hostile ionic liquid medium. Oxygen based vinylene carbonate is found to offer the best protection of the lithium metal whilst allowing very consistent lithium cycling to occur. The vinylene carbonate based system under study is, however, imperfect. Lithium metal is deposited in a dendritic morphology, and vinylene carbonate is rapidly consumed during lithium cycling if it is present in a small quantity. Our results suggest that ionic liquid systems critically relying on a small amount of additive to protect a lithium electrode are not viable for long cycle life secondary batteries. It is suggested that an ionic liquid which itself is lithium metal compatible be used instead.

The electrochemistry of lithium in ionic liquid/organic diluent mixtures

The electrochemistry of lithium is investigated in a number of electrolytes that consist of a lithium salt dissolved in a combined ionic liquid-organic diluent medium. We find that ethylene carbonate and vinylene carbonate improve electrochemical behaviour, while toluene and tetrahydrofuran are less promising.We also present insights into the electrode passivation caused by these diluents in an ionic liquid electrolyte during lithium cycling. We observe that during lithium cycling those electrolytes with carbonate based diluents are the most able to utilise their previously reported improved lithium ion diffusivities. Conversely, tetrahydrofuran, the most promising diluent of those studied in terms of its known ability to increase lithium ion diffusivity is found not to be as advantageous as a diluent. It appears that the poor electrochemical interfacial properties of the tetrahydrofuran electrolyte prevented the realisation of the benefits of the high solution lithium ion diffusivity.

Growth of V2O5 nanorods from ball-milled powders and their performance in cathodes and anodes of lithium-ion batteries

The two-stage procedure of ball milling and annealing in air represents a prospective method of preparing nanorods of V₂O₅ with electrochemical properties suitable for the application in lithium-ion batteries. Commercially purchased V₂O₅ powder is milled in a ball mill as the first step of the synthesis. The as-milled precursor is subsequently annealed in air to produce the morphology of nanorods via solid-state recrystallization. We have recently investigated intermediate stages of the formation of nanorods, and this paper summarizes the synthesis method including the description of the current understanding of the growth mechanism. The obtained V₂O₅ nanorods have been assessed as an electrode material for both anodes and cathodes of lithium-ion batteries. When used in cathodes, the nanorods demonstrate a better retention of capacity upon cycling than that of the commercially available powder of V₂O₅. When used in anodes, the performances of nanorods and the reference V₂O₅ powder are similar to a large extent, which is related to a different operating mechanism of V₂O₅ in anodes. The experimentally observed capacity of V₂O₅ nanorods in an anode has stabilized at the level of about 450 mAh/g after few cycles.

Biological maturity and primary school children's physical activity : influence of different physical activity assessment instruments

Biological maturation may attenuate hypothesized sex differences in children’s physical activity but overall the evidence for this is equivocal. In this study, we investigated how the selection of different physical activity assessment instruments affects the detected relationship between biological maturation and late primary school children’s physical activity. Altogether, 175 children (97 girls, 78 boys) aged 10.690.3 years completed the PAQ-C self-report questionnaire and wore ActiGraph GT1M accelerometers for 5 consecutive days. Maturity status was predicted by estimating attainment of age at peak height velocity. Following initial exploration of sex differences in PAQ-C (t-test) and multiple ActiGraph outcome variables (MANOVA), the influence of maturity status was controlled using ANCOVA and MANCOVA. Unadjusted analyses revealed that boys were significantly more active than girls according to the PAQ-C (PB0.0001, d0.52) and ActiGraph (PB0.0001, d0.360.72). After controlling for maturity status, the differences in PAQ-C scores increased (P0.001, d0.64), but the significant differences disappeared for the ActiGraph data (P0.36, d0.170.33). The detected relationship between maturity status and late primary school children’s physical activity is dependent on the physical activity assessment tool employed, reflecting the different aspects of physical activity captured by the respective measures.

The effect of artificial night light on the abundance of nocturnal birds

Urbanisation is increasing rapidly, impacting on a broad range of species. The proliferation of electric light has transformed the night time environment; however, our understanding on the effects of artificial night lighting on fauna, including nocturnal birds, is extremely limited. The aim ofthis research was to determine whether artificial night light affected the abundance of nocturnal birds. Spotlighting surveys were undertaken in Research Park, Melbourne, Victoria, along three 300 m transects. Each transect was surveyed five times during three light treatments: when lights were on, 20 minutes after lights were turned off and when lights were absent, over a period often nights. A total of 123 nocturnal birds was detected during survey nights. Two species were recorded - the Southern Boobook Ninox novaeseelandiae and the Tawny Frogmouth Podargus strigoides. The Tawny Frogmouth was detected along all three transects (n=121); however, the Southern Boobook was detected along one transect only (n=2). None of the light treatments had a significant effect on bird abundance. Neither did location, habitat or the combined effects of light treatments, location and habitat. The results of this research will contribute to a growing body of knowledge and support future conservation activities for species in areas undergoing urbanisation. {The Victorian Naturalist 127 (5) 2010, 192-195).