R&D investment, international trade, and home market and competitiveness efects

We analyze the effects of R&D investment on international trade. The importance of studying this comes from the fact that one of the most important characteristics of modern industrial organization is that firms try to influence market behavior through strategic variables as R&D. Moreover international competition between firms is, more and more, also centered in R&D competition (besides output and price competition). With this in mind, we develop an oligopolist reciprocal-markets model where firms engage in R&D investment to achieve future reductions in marginal costs. We find ‘home market effects’ at the level of R&D investment, i.e.: firms located in countries that host a higher share of skilled-labor perform higher levels of R&D investment. As consequence, firms in these countries are more competitive than firms in other countries, and as such they can penetrate more easily foreign markets. As result of this ‘competitiveness effect’, countries where these firms are located run trade surplus, while countries where firms perform lower levels of R&D investment incur in trade deficits.

Diretor da London School of Economics, Craig Calhoun, é recebido pela FGV/DAPP durante visita institucional

O Diretor da London School of Economics and Political Science (LSE), Craig Calhoun, foi recebido na terça-feira (29) pelo Presidente da Fundação Getulio Vargas, Carlos Ivan Simonsen Leal, durante visita institucional à FGV. Pela manhã, os presidentes das duas instituições tiveram uma reunião com a presença do Secretário-Executivo da LSE, Hugh Martin, do Diretor da DAPP, Marco Aurélio Ruediger, do Diretor da EPGE (Escola Brasileira de Economia e Finanças), Rubens Cysne, da Diretora-Executiva da Editora FGV, Marieta de Moraes Ferreira, e do Prof. Antônio Carlos Porto Gonçalves, também da EPGE. No encontro, foi discutido o maior intercâmbio de alunos entre a LSE e a FGV e em projetos de pesquisa. À tarde, Calhoun realizou uma visita à sede da DAPP, onde participou de uma reunião de apresentação dos métodos de monitoramento e análise de rede desenvolvidos pela DAPP. Participaram da reunião, além do Diretor da DAPP, os pesquisadores Roberta Novis, Amaro Grassi e Pedro Lenhard.

O que é preciso para crescer?

Novo centro de pesquisa sobre desenvolvimento da FGV tem como foco educação e eficiência. Políticas industriais serão questionadas.

Análise econômica do direito e o sistema de patentes como mecanismo da regulação da inovação: comentários às corridas por patentes

O sistema de patentes pode ser considerado um instrumento de regulação da inovação. Alguns autores que estudam o sistema de patentes pela ótica da análise econômica do direito indicam que as chamadas “corridas por patentes” – quando diferentes indivíduos ou empresas, de forma independente, buscam desenvolver e patentear uma solução para determinado problema técnico – configurariam uma ineficiência do sistema de patentes. Isso porque, de acordo com esses autores, somente o primeiro a concluir o desenvolvimento de uma nova solução técnica e requerer proteção junto aos órgãos competentes é que poderia obter uma patente e explorar a invenção, de maneira que os outros competidores teriam simplesmente desperdiçado recursos escassos com suas pesquisas. O objetivo dessa dissertação é verificar se tais análises estão corretas, ou seja, se as “corridas por patentes” de fato constituem uma ineficiência do sistema de patentes, em especial à luz da legislação pertinente ao tema, da lógica atinente ao processo de inovação, da teoria dos jogos e dos benefícios eventualmente gerados para a sociedade pela pesquisa e desenvolvimento de novas soluções técnicas.

A relação entre os jovens e o corpo em Natal

O presente estudo resulta de uma pesquisa em desenvolvimento na Universidade Federal do Rio Grande do Norte que busca estabelecer relações entre o papel do corpo, em um contexto midiático, na construção e constituição da subjetividade de jovens em Natal, capital norte-riograndense. Expressões dessa subjetividade indicam que o corpo, a mídia eletrônica e a Internet são referências importantes que permitem perceber traços ao mesmo tempo singulares e universais de uma cultura juvenil, que é complexa e ambivalente por natureza

Sistema supervisório para o método de elevação plunger lift

SOARES, Lennedy C. ; MEDEIROS, Adelardo A. D. de ; PROTASIO, Alan D. D. ; BOLONHINI, Edson H. Sistema supervisório para o método de elevação plunger lift. In: CONGRESSO BRASILEIRO DE PESQUISA E DESENVOLVIMENTO EM PETRÓLEO E GÁS, 5., Fortaleza, CE, 2009. Anais...Fortaleza: CBPDPetro, 2009.

Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico

LINS, Filipe C. A. et al. Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico. In: CONGRESSO BRASILEIRO DE PESQUISA E DESENVOLVIMENTO EM PETRÓLEO E GÁS, 5. 2009, Fortaleza, CE. Anais... Fortaleza: CBPDPetro, 2009.

Responsabilidade social empresarial: uma avaliação do Projeto Escola de Informática e Cidadania da Mineradora Y situada no Estado do Pará

The subject Responsibility Enterprise Social (RSE) is relatively recent in the half national academic and the world of the management businesses as practical. For the lack of socialization of experiences and clarity of concepts, shunting lines in the agreement of the subject and the conduction of the interventions occur. It was looked to inquire, in this research, the development of the project of Social Responsibility Enterprise ―School of Computer science and Citizenship‖ of a situated company in the State of Pará, objectifying to evaluate it and later to understand it. For this, one searched to describe the characteristics and structure of the School, to identify to the lines and lines of direction adopted for this Project and to identify to the influence and results of the same in the life of pupils, professors and egresses of the School. It is characterized for a study of case with qualitative boarding of descriptive character, carried through interviews structuralized in a sample of 21 divided members of the School between professors, pupils and egresses. It was used of the analysis of categorical content, having as axle for the interpretation of the data the Social Responsibility, the Digital Inclusion and the Education. The gotten results inform that the infrastructure has challenges to face, point disparities between the conception and practical of the categories characterized in the Politician-Pedagogical Project of the EIC and the influence that, exactly under limits, the life of the professors, pupils reaches and egress. One evidenced that Social action for damages of this company when come back toward this project, they had not been evidenced. For this prism, these actions had only remained in the assistencialist speech and not structural, being thus, the company is not fulfilling its paper of transforming element of the reality of its clientele and the population that lives in it s around

Ampliação de movimentos na dança circular com pessoas com deficiência visual

This paper aims at studying how circular dance can afford to sight-disabled peoples movement and how they can learn to cope with the deep movement of relation, consciousness, appropriation and communion with the world. Inside circular dance, a cosmic metaphor, is inscribed the movement of the world, which tells and changes amorously the human history. In the works of Paulo Freire and Maurice Merleau-Ponty one can find the necessary support to discuss, as long as possible, movement and existence. Research-action is used as a methodological approach whose empirical center is placed on the Institute of Education and Rehabilitation of Blind, in Natal, which shelters eight sightdisabled adults. The research s data reveal that the practice of circular dance concurs to enlarge the movement of the research s subjects, to develop a more accurate perception of their selves and of their own capacities, as well as improve the relations Me/Others, Me/World, which require a context of differences. The study has revealed that the practice of dance develops a better perception of the limits and surpasses as a human condition and, in consequence, the discovery of one s own body and the other s body as a resource of lessons and representations of the self and of the world. It lets out the development of a new way of thinking and coping with discrimination surrounding the disabled persons. In movement, in circular dance, the barrier between sight disablement and vision loses force.

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Aquisição e construção de modelos estáticos análogos a reservatórios petrolíferos com tecnologia lidar e georadar

The present work develops a methodology to establish a 3D digital static models petroleum reservoir analogue using LIDAR and GEORADAR technologies. Therefore, this work introduce The methodolgy as a new paradigm in the outcrop study, to purpose a consistent way to integrate plani-altimetric data, geophysics data, and remote sensing products, allowing 2D interpretation validation in contrast with 3D, complexes depositional geometry visualization, including in environmental immersive virtual reality. For that reason, it exposes the relevant questions of the theory of two technologies, and developed a case study using TerraSIRch SIR System-3000 made for Geophysical Survey Systems, and HDS3000 Leica Geosystems, using the two technologies, integrating them GOCAD software. The studied outcrop is plain to the view, and it s located at southeast Bacia do Parnaíba, in the Parque Nacional da Serra das Confusões. The methodology embraces every steps of the building process shows a 3D digital static models petroleum reservoir analogue, provide depositional geometry data, in several scales for Simulation petroleum reservoir

Adição de poliuretana em pastas de cimento para poços de petróleo como agente de correção do filtrado

Chemical admixtures, when properly selected and quantified, play an important role in obtaining adequate slurry systems for quality primary cementing operations. They assure the proper operation of a well and reduce costs attributed to corrective cementing jobs. Controlling the amount lost by filtering through the slurry to permeable areas is one of the most important requirements in an operation, commonly controlled by chemical admixtures, such as carboxymethylcellulose (CMC). However, problems related to temperature, salttolerance and the secundary retarding effect are commonly reported in the literature. According to the scenario described above, the use of an aqueous dispersion of non-ionic poliurethane was proposed to control the filter loss, given its low ionic interaction with the free ions present in the slurries in humid state. Therefore, this study aims at assessing the efficiency of poliurethane to reduce filter loss in different temperature and pressure conditions as well as the synergistic effect with other admixtures. The temperatures and pressures used in laboratory tests simulate the same conditions of oil wells with depths of 500 to 1200 m. The poliurethane showed resistance to thermal degradation and stability in the presence of salts. With the increase in the concentration of the polymer there was a considerable decrease in the volume lost by filtration, and this has been effective even with the increase in temperature

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Injeção de vapor e solvente como um método de recuperação avançada em reservatório avançada em reservatórios de óleo pesado

Currently a resource more and more used by the petroleum industry to increase the efficiency of steam flood mechanism is the addition of solvents. The process can be understood as a combination of a thermal method (steam injection) with a miscible method (solvent injection), promoting, thus, the reduction of interfacial tensions and oil viscosity. The use of solvent alone tends to be limited because of its high cost. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a zone of low viscosity between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method, a numerical study of the process was done contemplating the effects of some operational parameters (distance between wells, injection steam rate, kind of solvent and injected solvent volume)on the accumulated production of oil, recovery factor and oil-steam rate. Semisynthetic models were used in this study but reservoir data can be extrapolated for practical applications situations on Potiguar Basin. Simulations were performed in STARS (CMG, 2007.11). It was found that injected solvent volumes increased oil recovery and oil rates. Further the majority of the injected solvent was produced and can be recycled

Uso de argilominerais e diatomita como adsorvente de fenóis em águas produzidas na indústria de petróleo

The oil production in Brazil has been increasing each year. Consequently, increasing volumes of water produced are generated with large quantities of contaminants, which brings many problems in disposing of these waters. The concern that the concentrations of contaminants in water produced meet existing laws for disposal of effluents, has been extremely important for the development of different techniques for treatment of water produced. The study of clay minerals as adsorbents of organic contaminants has grown considerably so in order to combine the low cost with the efficiency of environmental preservation and health issues. Thus, this study aims to understand the characteristics of vermiculite clay, sodium bentonite, calcium bentonite and diatomite and evaluate their performance as adsorbents for phenol in the water produced. Through adsorption isotherms it was possible to observe the behavior of these adsorptive clay and diatomite for adsorption of phenol, the main phenolic compound found in water produced. Different concentrations of synthetic solutions of phenol were put in touch with these adsorbents under same conditions of agitation and temperature. The adsorbents were composted adsorptive favorable, but the vermiculite and diatomite showed little capacity for absorption, being suggested for absorbs small concentrations of phenol in the balance isothermal