Intégration de la pensée cycle de vie aux études d'impacts : cas du site minier Raglan

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

Veränderungen im Öko-Lebensmittelkonsum in Familien mit Kindern und deren Hintergründe

Im Rahmen der Arbeit wird den Fragen nachgegangen, inwiefern der Konsum von Öko-Lebensmitteln in Familien mit Kindern im zeitlichen Verlauf Veränderungen unterliegt und worin Veränderungen im Öko-Lebensmittelkonsum in Familien mit Kindern begründet sind. Aus den hierzu gewonnenen Erkenntnissen werden Schlussfolgerungen für die Konsumentenforschung und das Marketing von Öko-Produkten gezogen. Theoretische Grundlage stellen der Familienzyklus sowie Forschungsergebnisse zum Konsumentenverhalten in Familien und zum Konsum von Öko-Lebensmitteln in Familien dar. Für die empirische Bearbeitung der Forschungsfragen wurde ein qualitatives Forschungsdesign gewählt. Der Forschungsprozess gliederte sich in drei Wellen der Datenerhebung und -auswertung. Im Rahmen dessen wurden Eltern mithilfe problemzentrierter Interviews zur Entwicklung des Öko-Konsums in ihren Familien befragt. Die Interviews wurden computergestützt und in Anlehnung an die Kodierprozeduren offenes und axiales Kodieren der Grounded Theory ausgewertet. Ergebnis der Datenanalyse sind drei Zusammenhangsmodelle, die zu einer Erklärung von Veränderungen im Öko-Lebensmittelkonsum von Familien beitragen. Veränderungen können demnach erstens in einer Erhöhung der Konsumintensität während einer Schwangerschaft bestehen. Als Bedingungen hierfür konnten ein verstärktes Bewusstsein für Öko-Produkte, die körperliche Konstitution der Mutter sowie die Unterstützung durch die soziale Umwelt identifiziert werden. Weitere Bedingungen stellen Lebensmittelskandale sowie eine gute Verfügbarkeit von Öko-Produkten dar. Handlungsstrategien der Eltern beziehen sich auf das Wohlergehen des noch ungeborenen Kindes (Förderung der Gesundheit, Erhalten der zukünftigen Lebenswelt, Orientierung für die spätere Ernährung des Kindes) sowie auf das Wohlergehen der werdenden Mutter (Förderung der Gesundheit, Förderung des Wohlbefindens, Umgang mit schwangerschaftsbedingten Beschwerden). Zweitens können Veränderungen des Öko-Lebensmittelkonsums in einer Erhöhung der Konsumintensität ab dem Zeitpunkt der Umstellung der Ernährung eines Kindes auf eine Beikosternährung bestehen. Bedingungen hierfür sind eine verstärkte Beachtung von Öko-Produkten, die körperliche Konstitution des Kindes, die Abstimmung von Familien- und Baby-Kost, der Austausch mit und die Unterstützung durch die soziale Umwelt sowie der Wunsch von Eltern, einen Beitrag zum Öko-Landbau zu liefern. Bedingungen können außerdem eine gute Verfügbarkeit von Öko-Produkten sowie der Einfluss von Medien darstellen. Handlungsstrategien der Eltern beziehen sich auf die Ernährung des Kindes (Förderung der Gesundheit, Förderung der Geschmackssozialisation) und auf die Ernährung der restlichen Familie (effiziente Beschaffung und Verwendung von Lebensmitteln, Förderung des Wohlbefindens der Eltern). Drittens können Veränderungen im Öko-Lebensmittelkonsum in Familien in einem Rückgang der Konsumintensität während des Übergangs von Kindern ins Jugendalter bestehen. Bedingungen hierfür bestehen in der Konsequenz, mit der Eltern konventionellen Lebensmittelwünschen ihrer Kinder nachgeben, in der Beurteilung von Lebensmitteln durch die Eltern sowie in der Intensität, mit der Kinder ihre Wünsche einfordern. Handlungsstrategien der Eltern sind darauf ausgerichtet Kindern einen Wunsch zu erfüllen, sich gegenüber diesen liberal zu verhalten, Konflikte mit Kindern zu vermeiden oder diese ihre eigenen Erfahrungen sammeln zu lassen. Die Ergebnisse tragen zu einer theoretischen Fundierung des Zusammenhangs zwischen Familienzyklus und dem Öko-Lebensmittelkonsum in Familien bei und zeigen, dass dieser ein sinnvolles theoretisches Bezugssystem für Veränderungen der Konsumintensität von Öko-Produkten darstellt. Für die Konsumentenforschung tragen die Ergebnisse zu einem differenzierten Verständnis von Ober- und Untergrenzen von Familienzyklusstadien bei. Es zeigt sich weiterhin, dass Veränderungen des Öko-Konsums unter anderem unter dem Einfluss der sozialen Umwelt stehen. Im Hinblick auf das Marketing kann insbesondere geschlussfolgert werden, dass bei bestimmten Produktkategorien die Bedürfnisse jugendlicher Zielgruppen verstärkt berücksichtigt werden sollten. Zur Bindung junger Familien ist darauf hinzuwirken, einen Mehraufwand bei der Beschaffung von Öko-Produkten auszuschließen. Für die Ansprache der Zielgruppe Schwangere erscheinen Kommunikationsbotschaften geeignet, die sich auf das Wohlbefinden von Kind und Mutter und auf Nachhaltigkeitsaspekte beziehen. Eltern mit Kindern im Übergang zu einer Beikosternährung könnten gezielt durch Kommunikationsbotschaften angesprochen werden, die in Zusammenhang mit der Förderung der Gesundheit und der Geschmacksozialisation von Kindern stehen.

Defining a framework for the evaluation of information

In any enterprise, decisions need be made during the life cycle of information about its management. This requires information evaluation to take place; a little-understood process. For evaluation support to be both effective and resource efficient, some sort of automatic or semi-automatic evaluation method would be invaluable. Such a method would require an understanding of the diversity of the contexts in which evaluation takes place so that evaluation support can have the necessary context-sensitivity. This paper identifies the dimensions influencing the information evaluation process and defines the elements that characterise them, thus providing the foundations for a context-sensitive evaluation framework.

Case study on the whole life carbon cycle in buildings

Global temperatures are expected to rise by between 1.1 and 6.4oC this century, depending, to a large extent, on the amount of carbon we emit to the atmosphere from now onwards. This warming is expected to have very negative effects on many peoples and ecosystems and, therefore, minimising our carbon emissions is a priority. Buildings are estimated to be responsible for around 50% of carbon emissions in the UK. Potential reductions involve both operational emissions, produced during use, and embodied emissions, produced during manufacture of materials and components, and during construction, refurbishments and demolition. To date the major effort has focused on reducing the, apparently, larger operational element, which is more readily quantifiable and reduction measures are relatively straightforward to identify and implement. Various studies have compared the magnitude of embodied and operational emissions, but have shown considerable variation in the relative values. This illustrates the difficulties in quantifying embodied, as it requires a detailed knowledge of the processes involved in the different life cycle phases, and requires the use of consistent system boundaries. However, other studies have established the interaction between operational and embodied, which demonstrates the importance of considering both elements together in order to maximise potential reductions. This is borne out in statements from both the Intergovernmental Panel on Climate Change and The Low Carbon Construction Innovation and Growth Team of the UK Government. In terms of meeting the 2020 and 2050 timeframes for carbon reductions it appears to be equally, if not more, important to consider early embodied carbon reductions, rather than just future operational reductions. Future decarbonisation of energy supply and more efficient lighting and M&E equipment installed in future refits is likely to significantly reduce operational emissions, lending further weight to this argument. A method of discounting to evaluate the present value of future carbon emissions would allow more realistic comparisons to be made on the relative importance of the embodied and operational elements. This paper describes the results of case studies on carbon emissions over the whole lifecycle of three buildings in the UK, compares four available software packages for determining embodied carbon and suggests a method of carbon discounting to obtain present values for future emissions. These form the initial stages of a research project aimed at producing information on embodied carbon for different types of building, components and forms of construction, in a simplified form, which can be readily used by building designers in optimising building design in terms of minimising overall carbon emissions. Keywords: Embodied carbon; carbon emission; building; operational carbon.

The diurnal cycle in the tropics

A global archive of high-resolution (3-hourly, 0.58 latitude–longitude grid) window (11–12 mm) brightness temperature (Tb) data from multiple satellites is being developed by the European Union Cloud Archive User Service (CLAUS) project. It has been used to construct a climatology of the diurnal cycle in convection, cloudiness, and surface temperature for all regions of the Tropics. An example of the application of the climatology to the evaluation of the climate version of the U.K. Met. Office Unified Model (UM), version HadAM3, is presented. The characteristics of the diurnal cycle described by the CLAUS data agree with previous observational studies, demonstrating the universality of the characteristics of the diurnal cycle for land versus ocean, clear sky versus convective regimes. It is shown that oceanic deep convection tends to reach its maximum in the early morning. Continental convection generally peaks in the evening, although there are interesting regional variations, indicative of the effects of complex land–sea and mountain–valley breezes, as well as the life cycle of mesoscale convective systems. A striking result from the analysis of the CLAUS data has been the extent to which the strong diurnal signal over land is spread out over the adjacent oceans, probably through gravity waves of varying depths. These coherent signals can be seen for several hundred kilometers and in some instances, such as over the Bay of Bengal, can lead to substantial diurnal variations in convection and precipitation. The example of the use of the CLAUS data in the evaluation of the Met. Office UM has demonstrated that the model has considerable difficulty in capturing the observed phase of the diurnal cycle in convection, which suggests some fundamental difficulties in the model’s physical parameterizations. Analysis of the diurnal cycle represents a powerful tool for identifying and correcting model deficiencies.

An integrated dynamic whole life costing analysis for air distribution systems

Air distribution systems are one of the major electrical energy consumers in air-conditioned commercial buildings which maintain comfortable indoor thermal environment and air quality by supplying specified amounts of treated air into different zones. The sizes of air distribution lines affect energy efficiency of the distribution systems. Equal friction and static regain are two well-known approaches for sizing the air distribution lines. Concerns to life cycle cost of the air distribution systems, T and IPS methods have been developed. Hitherto, all these methods are based on static design conditions. Therefore, dynamic performance of the system has not been yet addressed; whereas, the air distribution systems are mostly performed in dynamic rather than static conditions. Besides, none of the existing methods consider any aspects of thermal comfort and environmental impacts. This study attempts to investigate the existing methods for sizing of the air distribution systems and proposes a dynamic approach for size optimisation of the air distribution lines by taking into account optimisation criteria such as economic aspects, environmental impacts and technical performance. These criteria have been respectively addressed through whole life costing analysis, life cycle assessment and deviation from set-point temperature of different zones. Integration of these criteria into the TRNSYS software produces a novel dynamic optimisation approach for duct sizing. Due to the integration of different criteria into a well- known performance evaluation software, this approach could be easily adopted by designers in busy nature of design. Comparison of this integrated approach with the existing methods reveals that under the defined criteria, system performance is improved up to 15% compared to the existing methods. This approach is interpreted as a significant step forward reaching to the net zero emission building in future.

Product verification and defect repair - status and considerations

Product verifications have become a cost-intensive and time-consuming aspect of modern electronics production, but with the onset of an ever-increasing miniaturisation, these aspects will become even more cumbersome. One may also go as far as to point out that certain precision assembly, such as within the biomedical sector, is legally bound to have 0 defects within production. Since miniaturisation and precision assembly will soon become a part of almost any product, the verifications phases of assembly need to be optimised in both functionality and cost. Another aspect relates to the stability and robustness of processes, a pre-requisite for flexibility. Furthermore, as the re-engineering cycle becomes ever more important, all information gathered within the ongoing process becomes vital. In view of these points, product, or process verification may be assumed to be an important and integral part of precision assembly. In this paper, product verification is defined as the process of determining whether or not the products, at a given phase in the life-cycle, fulfil the established specifications. Since the product is given its final form and function in the assembly, the product verification normally takes place somewhere in the assembly line which is the focus for this paper.

Evaluation of fatigue behavior on repaired carbon fiber/epoxy composites

The continuous use of structural polymer composites in aeronautical industry has required the development of repairing techniques of damages found in different types of laminates. The most usually adopted procedure to investigate the repair of composite laminates has been by repairing damages simulated in laminated composite specimens. This work shows the influence of structural repair technique on mechanical properties of a typical carbon fiber/epoxy laminate used in aerospace industry. When analyzed by tensile test, the laminates with and without repair present tensile strength values of 670 and 892 MPa, respectively, and tensile modulus of 53.0 and 67.2 GPa, respectively. By this result, it is possible to observe a decrease of the measured mechanical properties of the repaired composites. When submitted to fatigue test, it is observed that in loads higher than 250 MPa, this laminate presents a low life cycle (lower than 400,000 cycles). The fatigue performance of both laminates is comparable, but the non-repaired laminate presented higher tensile and fatigue resistance when compared with the repaired laminate.

Environmental evaluation of metals in sediments and dragonflies due to sugar cane cultivation in neotropical streams

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Environmental evaluation of cogeneration scenarios in sugar industry

The development of new techniques that allow the analysis and optimization of energy systems bearing in mind environmental issues is indispensable in a world with finite natural resources and growing demand of energy. Among the energy systems that deserve special attention, cogeneration in the sugar industry must be pointed out, because it uses efficiently a common fuel for generation of useful heat and power. Within this frame, thermoeconomical optimization - 2nd Law of Thermodynamics analysis by exergy function and economic evaluation of the thermal system - gradually is taking importance as a powerful tool to assist to the decision making process. Also, the explicit consideration of environmental issues offers a better way to explore trade-offs between different aspects to support the decisions that must be made. In this work it is used the technique of Life Cycle Analysis (LCA) which allows to consider environmental matters as an integral part of the problem, in opposite to most of the environmental approaches that only reduce residuals generation , without taking into account impacts associated to other related processes. On the other hand, the consideration of environmental issues in optimization of energy systems is a novel and promissory contribution in the state of the art of energy optimization and LCA. The system under study is a sugar plant of Tucumán (Argentina) given the particular importance that this industry had inside the regional economy of the Argentinean Northwest. Although cogeneration comes being used a while ago in sugar industry, being the main objective the generation of heat and as secondary objective the electric power generation and mechanic power to cover several needs of working machineries, to the date it is no available a versatile tool that allows to analyze economical feasible alternatives bearing in mind environmental issues. At sugar plants, steam is generated in boilers using as fuel bagasse - cellulosic fiber waste obtained crushing the sugar cane- and it is used to give useful heat and shaft work to the plant, but it can also be used to generate electricity with export opportunities to the electrical network. The great number of process alternatives outlines a serious decision making problem in order to take advantage of the resources. Although the problem turns out to be a mixed non-linear problem (MINLP), the main contribution of this work is the development of a hybrid strategy to evaluate cogeneration alternatives that combines optimization approaches with environmental indicators. This powerful tool for its versatility and robustness to analyze cogeneration systems, will be of great help in the decision making process, because of their easy implementation to analyze the kind of problems presented in the sugar industry.

Brazilian solar water heating systems evaluation

The Brazilian National Electricity Conservation Program - PROCEL - runs regular surveys in the electric-energy-consumption market. These studies are used as valuable data to better plan the actions of this program. These data also evaluate the program's performance by identifying the level of penetration of the most efficient electric equipment within the residential sector. PROCEL's main lines of action is to promote and make available the most efficient technologies. Based on the results from the latest survey, it is estimated that 24% of the electric-energy consumption of the residential sector is used by electric shower devices, which instantaneously heat the water that flows through them, normally using an electric resistance of 5 kW. These are an important factor in a country where electric-heating devices are present in about 73% of Brazilian households. Keeping that in mind, the purpose of this work is to present the main results of the Brazilian Solar-Water-Heating-Systems Evaluation, finished in 2010, where 535 installations were visited and more than 50 researchers from different universities participated in the project. Moreover, seven Brazilian cities were selected to be studied. The information was collected from field research and statistically treated. The collected information focused on the adequacy of the project to the household, installation, operation and life cycle of the systems, as well as the users' satisfaction level. Technical questionnaires were developed to summarize all the required information, such as a Web site designed to organize and manage the data collected and a Matlab application that performed the dimensioning and F-chart systems evaluation. Quality indicators were created through a full system monitoring, with thermographic analysis and evaluation of shading influence at the system's efficiency, using the Ecotect software.

Análise dos impactos na construção civil: avaliação do ciclo de vida em chapas de partículas para forros

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo químico e biológico do fungo endofítico Phomopsis sp. isolado da Senna spectabilis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evaluation of maturity levels in the management of product development: case studies in the capital goods industry

In recent approaches to the management of product development process (PDP), maturity levels have attracted the attention of practitioners and researchers. The CMMI model contributes to evaluate the maturity levels and improvement of the product development process management. This paper, based on CMMI model, analyzes the practices adopted in two companies of the capital goods industry, which develop and manufacture equipment upon request. It was observed that on account of market conditioning factors and different practices adapted to PDP management, these companies are at different maturity levels. One company is at the initial level of maturity while the other at the most advanced one. It was also noted that the application of CMMI model can provide improvement to PDP management, as well as present guidelines to achieve higher maturity levels, adequate to companies' needs.

Redesign do calçado com solado de corda a partir dos resíduos têxteis da indústria do vestuário: inovação de material e avaliação de conforto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)