Dissolution rate enhancement, in vitro evaluation and investigation of drug release kinetics of chloramphenicol and sulphamethoxazole solid dispersions

Formulation of solid dispersions is one of the effective methods to increase the rate of solubilization and dissolution of poorly soluble drugs. Solid dispersions of chloramphenicol (CP) and sulphamethoxazole (SX) as model drugs were prepared by melt fusion method using polyethylene glycol 8000 (PEG 8000) as an inert carrier. The dissolution rate of CP and SX were rapid from solid dispersions with low drug and high polymer content. Characterization was performed using fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). FTIR analysis for the solid dispersions of CP and SX showed that there was no interaction between PEG 8000 and the drugs. Hyper-DSC studies revealed that CP and SX were converted into an amorphous form when formulated as solid dispersion in PEG 8000. Mathematical analysis of the release kinetics demonstrated that drug release from the various formulations followed different mechanisms. Permeability studies demonstrated that both CP and SX when formulated as solid dispersions showed enhanced permeability across Caco-2 cells and CP can be classified as well-absorbed compound when formulated as solid dispersions. © 2013 Informa Healthcare USA, Inc.

The design, evaluation and costing of biomass gasifiers

The objective of this study has been to enable a greater understanding of the biomass gasification process through the development and use of process and economic models. A new theoretical equilibrium model of gasification is described using the operating condition called the adiabatic carbon boundary. This represents an ideal gasifier working at the point where the carbon in the feedstock is completely gasified. The model can be used as a `target' against which the results of real gasifiers can be compared, but it does not simulate the results of real gasifiers. A second model has been developed which uses a stagewise approach in order to model fluid bed gasification, and its results have indicated that pyrolysis and the reactions of pyrolysis products play an important part in fluid bed gasifiers. Both models have been used in sensitivity analyses: the biomass moisture content and gasifying agent composition were found to have the largest effects on performance, whilst pressure and heat loss had lesser effects. Correlations have been produced to estimate the total installed capital cost of gasification systems and have been used in an economic model of gasification. This has been used in a sensitivity analysis to determine the factors which most affect the profitability of gasification. The most important influences on gasifier profitability have been found to be feedstock cost, product selling price and throughput. Given the economic conditions of late 1985, refuse gasification for the production of producer gas was found to be viable at throughputs of about 2.5 tonnes/h dry basis and above, in the metropolitan counties of the United Kingdom. At this throughput and above, the largest element of product gas cost is the feedstock cost, the cost element which is most variable.

The development, evaluation and use of freshly isolated renal proxinal tubule systems in the fischer rat

The investigation of renal pathophysiology and toxicology has traditionally been advanced by the development of increasingly defined and refined in vitro preparations. This study has sought to develop and evaluate various methods of producing pure samples of renal proximal tubules (PTs) from the Fischer rat. The introduction summarised the most common in vitro preparations together with the parameters used to monitor viability - particularly with regard to toxic events. The most prevalent isolation methods have involved the use of collagenase to produce dissociation of the cortex. However, the present study has shown that even the mildest collagenase treatment caused significant structural damage which resulted in a longevity of only 3hr in suspension. An alternative mechanical isolation technique has been developed in this study that consists of perfusion loading the renal glomeruli with Fe304 followed by disruption of the cortex by homogenisation and sequential sieving. The glomeruli are removed magnetically and the PTs then harvested by a 64μM sieve. PTs isolated in this way showed a vastly superior structural preservation over their collagenase isolated counterparts; also oxygen consumption and enzyme leakage measurements showed a longevity in excess of 6hr when incubated in a very basic medium. Attempts were then made to measure the cytosolic calcium levels in both mechanical and collagenase isolated PTs using the fluorescent calcium indicator Fura. However results were inconclusive due to significant binding of the Fura to the external PT surfaces. In conclusion, PTs prepared by the present mechanical isolation technique exhibit superior preservation and longevity compared with even the mildest collagenase isolation technique and hence appear to offer potential advantages over collagenase isolation as an in vitro renal system.

The evaluation and development of the lead authority partnership scheme as a central intervention strategy for health and safety enforcement by local authorities

The research comprises a suite of studies that examines and develops the Lead Authority Partnership Scheme (LAPS) as a central intervention strategy for health and safety by local authority (LA) enforcers. Partnership working is a regulatory concept that in recent years has become more popular but there has been little research conducted to investigate, explore and evaluate its practical application. The study reviewed two contrasting approaches to partnership working between LAs and businesses, both of which were intended to secure improvements in the consistency of enforcement by the regulators and in the health and safety management systems of the participating businesses. The first was a well-established and highly prescriptive approach that required a substantial resource commitment on the part of the LA responsible for conducting a safety management review (SMR) of the business. As a result of his evaluation of the existing ‘full SMR’ scheme, the author developed a second, more flexible approach to partnership working. The research framework was based upon a primarily qualitative methodology intended to investigate and explore the impact of the new flexible arrangements for partnership working. The findings from this study of the flexible development of the scheme were compared and contrasted with those from studies of the established ‘full SMR’ scheme. A substantial degree of triangulation was applied in an attempt to strengthen validity and broaden applicability of the research findings. Key informant interviews, participant observation, document/archive reviews, questionnaires and surveys all their particular part to play in the overall study. The findings from this research revealed that LAPS failed to deliver consistency of LA enforcement across multiple-outlet businesses and the LA enforced business sectors. Improvement was however apparent in the safety management systems of the businesses participating in LAPS. Trust between LA inspector and safety professional was key to the success of the partnerships as was the commitment of these key individuals. Competition for precious LA resources, the priority afforded to food safety over health and safety, the perceived high resource demands of LAPS, and the structure and culture of LAs were identified as significant barriers to LA participation. Flexible approaches, whilst addressing the resource issues, introduced some fresh concerns relating to credibility and delivery. Over and above the stated aims of the scheme, LAs and businesses had their own reasons for participation, notably the personal development of individuals and kudos for the organisation. The research has explored the wider implications for partnership working with the overall conclusion it is most appropriately seen as a strategic level element within a broader structured intervention strategy.

Evaluation and development of drainage and pipeline construction processes

In 1974 Dr D M Bramwell published his research work at the University of Aston a part of which was the establishment of an elemental work study data base covering drainage construction. The Transport and Road Research Laboratory decided to, extend that work as part of their continuing research programme into the design and construction of buried pipelines by placing a research contract with Bryant Construction. This research may be considered under two broad categories. In the first, site studies were undertaken to validate and extend the data base. The studies showed good agreement with the existing data with the exception of the excavation trench shoring and pipelaying data which was amended to incorporate new construction plant and methods. An inter-active on-line computer system for drainage estimating was developed. This system stores the elemental data, synthesizes the standard time of each drainage operation and is used to determine the required resources and construction method of the total drainage activity. The remainder of the research was into the general topic of construction efficiency. An on-line command driven computer system was produced. This system uses a stochastic simulation technique, based on distributions of site efficiency measurements to evaluate the effects of varying performance levels. The analysis of this performance data quantities the variability inherent in construction and demonstrates how some of this variability can be reconciled by considering the characteristics of a contract. A long term trend of decreasing efficiency with contract duration was also identified. The results obtained from the simulation suite were compared to site records collected from current contracts. This showed that this approach will give comparable answers, but these are greatly affected by the site performance parameters.

It's in his eyes? The negotiation and interpretation of masculinity using the Dolce et Gabbana's 2005 Print advertising campaign

The concept of 'masculinity' has over more years received increased attention within consumer research discourse suggesting the potential of a 'crisis of masculinity', symptomatic of a growing feminisation, or 'queering' of visual imagery and consumption (e.g. Patterson & Elliott, 2002). Although this corpus of research has served to enrich the broader gender identity debate, it is, arguably, still relatively underdeveloped and therefore warrants further insight and elaboration. The aim of this paper is, therefore, to explore how masculinity is represented and interpreted by men using the Dolce et Gabbana men's 2005 print advertising campaign. The rationale for using this particular campaign is that it is one of the most homoerotic, provocative, and well publicised campaigns to cross over from the 'gay' media to more mainstream UK men's magazines. Masculinity, and what it means to be 'masculine', manifests itself within particular ideological, moral, cultural and hegemonic discourses. Masculinity is not a homogenous term which can be simply reduced, and ascribed, to those born as 'male' rather than 'female'.

Model evaluation and case series data

We discuss aggregation of data from neuropsychological patients and the process of evaluating models using data from a series of patients. We argue that aggregation can be misleading but not aggregating can also result in information loss. The basis for combining data needs to be theoretically defined, and the particular method of aggregation depends on the theoretical question and characteristics of the data. We present examples, often drawn from our own research, to illustrate these points. We also argue that statistical models and formal methods of model selection are a useful way to test theoretical accounts using data from several patients in multiple-case studies or case series. Statistical models can often measure fit in a way that explicitly captures what a theory allows; the parameter values that result from model fitting often measure theoretically important dimensions and can lead to more constrained theories or new predictions; and model selection allows the strength of evidence for models to be quantified without forcing this into the artificial binary choice that characterizes hypothesis testing methods. Methods that aggregate and then formally model patient data, however, are not automatically preferred to other methods. Which method is preferred depends on the question to be addressed, characteristics of the data, and practical issues like availability of suitable patients, but case series, multiple-case studies, single-case studies, statistical models, and process models should be complementary methods when guided by theory development.

Recommendations for sex/gender neuroimaging research:key principles and implications for research design, analysis and interpretation

Neuroimaging (NI) technologies are having increasing impact in the study of complex cognitive and social processes. In this emerging field of social cognitive neuroscience, a central goal should be to increase the understanding of the interaction between the neurobiology of the individual and the environment in which humans develop and function. The study of sex/gender is often a focus for NI research, and may be motivated by a desire to better understand general developmental principles, mental health problems that show female-male disparities, and gendered differences in society. In order to ensure the maximum possible contribution of NI research to these goals, we draw attention to four key principles—overlap, mosaicism, contingency and entanglement—that have emerged from sex/gender research and that should inform NI research design, analysis and interpretation. We discuss the implications of these principles in the form of constructive guidelines and suggestions for researchers, editors, reviewers and science communicators.

Multicriteria Evaluation and Optimization of Hierarchical Systems

It is shown that any multicriteria problem can be represented by a hierarchical system. Separate properties of the object are evaluated at the lower level of the system, using a criteria vector, and a composition mechanism is used to evaluate the object as a whole at the upper level. The paper proposes a method to solve complex multicriteria problems of evaluation and optimization. It is based on nested scalar convolutions of vector- valued criteria and allows simple structural and parametrical synthesis of multicriteria hierarchical systems.