836 resultados para Predator exposure
Resumo:
Children psychological abuse is difficult to identify. However, its consequences on child development can be as serious as physical and sexual abuses. It is therefore essential, to implement in our hospitals, structures whose missions are successively to detect victims, evaluate them on somatic and psychological levels, and elaborate a therapy. We propose a model for the achievement of these objectives through collaboration between the Medical Unit of Violence, the Pediatric CAN Team and the Unit of Les Boréales.
Resumo:
PURPOSE: Recent work practices in the conservation and restoration involve the use of cyclododecane (CDD, CAS 294-62-2) to protect fragile artifacts during their handling or transportation. Little is known about its toxicity, and no previous exposure has been reported. A short field investigation was conducted to characterize the exposure conditions to both CDD vapors and aerosols.METHODS: Measurements were conducted in the laboratory of conservation and restoration of the archeological service in Bern (Switzerland). Three indoor and four outdoor typical work situations, either during brush or spray gun applications, were investigated. Measurements were performed on charcoal adsorbent tube and analyzed by a gas chromatograph equipped with a flame ionization detector.RESULTS: Measurements have been conducted during both brush and spray gun applications. Indoor exposures were of 0.75-15.5 mg/m(3), while outdoors exposures were 19.5-53.9 mg/m(3). Exposures appear to be extremely localized due to both physicochemical properties and application methods of the CDD. Vapor exposure increases dramatically with the confinement of the workplace.CONCLUSION: Preventive measures should be undertaken to limit as much as possible these exposures. Field work in confined areas (ditches, underground) is of particular concern. CDD-coated artifacts or materials should be stored in ventilated areas to avoid delayed exposures. [Authors]
Resumo:
AIM: To describe outdoor activities, sun protection behaviours and the experience of sunburn in a sample of New Zealanders during summer weekends of 1994. METHODS: 1243 respondents to a telephone survey provided information regarding their outdoor activities for the 5 hour period around midday of the previous Saturday and Sunday. The sample was drawn from those aged 15 to 65 years in the five centres of Auckland, Hamilton, Wellington, Christchurch and Dunedin. Respondents provided information on sun exposure, sunburn, sun protection and beliefs about tanning, as well as background demographic information, skin type and previous experience of sunburn. RESULTS: 12% of the sample (or 17% of all those outdoors) reported being sunburned on the preceding weekend, and those sunburned tended to be men, and to be under age 35 years. The face, neck and limbs were the areas most frequently reported as burned. Sporting activities and beach or water activities were associated with the highest number of episodes of burning. Overall 38% of those outside reported wearing a hat and 32% reported the use of a sunscreen. Positive attitudes to tanning were quite common and probably present the main target for change in the community. CONCLUSION: On any sunny weekend in summer about three-quarters of adult New Zealanders will be out in the sun for relatively long periods of time, and many will get sunburned. The reduction of such harmful sun exposures remains an important public health goal.
Resumo:
Does the aggressiveness of the prey modify the attack behavior of the predator Supputius cincticeps (Stål) (Hemiptera, Pentatomidae)? The stink bug Supputius cincticeps (Stål) (Hemiptera, Pentatomidae) is a predator found in several Brazilian regions, which possesses desirable attributes as a natural control agent and in biological control programs. The aim of this study was to test if the attack behavior and predation success of S. cincticeps were affected by prey species. Larvae of Tenebrio molitor (L.) (Coleoptera, Tenebrionidae), Spodoptera frugiperda (J. E. Smith) (Lepidoptera, Noctuidae), and Thyrinteina arnobia (Stoll) (Lepidoptera, Geometridae) were offered to S. cincticeps in laboratory bioassays where predatory attack and prey defensive behaviors were observed for 2-hour periods. The attack behavior of S. cincticeps changed with the prey species offered. More than 25% of T. molitor and S. frugiperda larvae were immediately attacked, but T. arnobia was not immediately attacked by S. cincticeps. Successful attack (i.e., successful insertion of the predator stylets into the prey) depends on the region of the body attacked, with a greater proportion of successful attacks in the anterior than in the median or posterior regions. Larvae of T. arnobia and S. frugiperda displayed a sequence of abrupt head and body movements in response to S. cincticeps attack. Attempts of predation were more successful on T. molitor and S. frugiperda than on T. arnobia. Information about the differential attack behavior of S. cincticeps on different prey species is important for designing successful biological control programs using this hemipteran predator.
Resumo:
Interaction between Musca domestica L. and its predator Muscina stabulans (Fallén) (Diptera, Muscidae): Effects of prey density and food source abundance. The objective of this work was to evaluate the influence of prey density and food source abundance on the predatory behavior of Muscina stabulans over M. domestica. Three predator/prey proportions were evaluated (1:1, 1:3 and 1:6), using 100 third instar predator larvae against second instar prey larvae. Each proportion was maintained using three different levels of food substrate (25, 50 and 100 g). The experiments were carried out in triplicate in BOD incubators (25ºC, UR 70% ± 10% and 12 h photoperiod). The mortality of the M. domestica larvae was 100% under all conditions, except in the 1:6 predator/prey proportion, at the 50g and 100g food substrate levels, where it was 99.99% and 99.22%, respectively. There was a significant increase in the development period of M. stabulans in relation to the increase in prey density and decrease in quantity of food substrate. An increase in the proportion of individuals and a reduction in the amount of resource slowed down larval development. Muscina stabulans pupal weight was proportional to the increase in prey density and the amount of food substrate. The proportion or the density influenced the survival of M. stabulans, with no difference in relation to the amount of food source and consequently in the interaction of the factors. There was no difference between the 1:1 and 1:3 predator-prey densities, with both differing from the 1:6 density.
Resumo:
Developmental biology, polymorphism and ecological aspects of Stiretrus decemguttatus (Hemiptera, Pentatomidae), an important predator of cassidine beetles. Stiretrus decemguttatus is an important predator of two species of cassidine beetles, Botanochara sedecimpustulata (Fabricius, 1781) and Zatrephina lineata (Fabricius, 1787) (Coleoptera, Cassidinae), on the Marajó Island, Brazil. It attacks individuals in all development stages, but preys preferentially on late-instar larvae. Its life cycle in the laboratory was 43.70 ± 1.09 days, with an egg incubation period of six days and duration from nymph and adult stages of 16.31 ± 0.11 and 22.10 ± 1.67 days, respectively. The duration of one generation (T) was 12.65 days and the intrinsic population growth rate (r) 0.25. These data reveal the adjustment of the life cycle of S. decemgutattus with those of the two preys, but suggest greater impact on Z. lineata. However, no preference over cassidine species was shown in the laboratory. Up to 17 different color patterns can be found in adults of S. decemguttatus, based on combinations of three basic sets of color markings. Some of them resemble the markings of chrysomelids associated with Ipomoea asarifolia (Convolvulaceae) and are possibly a mimetic ring. Three color patterns were identified in nymphs, none of which was associated with any specific adult color pattern.
Resumo:
The Work Package 4 of the ORAMED project, a collaborative project (2008-11) supported by the European Commission within its seventh Framework Programme, is concerned with the optimisation of the extremity dosimetry of medical staff in nuclear medicine. To evaluate the extremity doses and dose distributions across the hands of medical staff working in nuclear medicine departments, an extensive measurement programme has been started in 32 nuclear medicine departments in Europe. This was done using a standard protocol recording all relevant information for radiation exposure, i.e. radiation protection devices and tools. This study shows the preliminary results obtained for this measurement campaign. For diagnostic purposes, the two most-used radionuclides were considered: (99m)Tc and (18)F. For therapeutic treatments, Zevalin(®) and DOTATOC (both labelled with (90)Y) were chosen. Large variations of doses were observed across the hands depending on different parameters. Furthermore, this study highlights the importance of the positioning of the extremity dosemeter for a correct estimate of the maximum skin doses.
Resumo:
In this study, we assessed the mixed exposure of highway maintenance workers to airborne particles, noise, and gaseous co-pollutants. The aim was to provide a better understanding of the workers' exposure to facilitate the evaluation of short-term effects on cardiovascular health endpoints. To quantify the workers' exposure, we monitored 18 subjects during 50 non-consecutive work shifts. Exposure assessment was based on personal and work site measurements and included fine particulate matter (PM2.5), particle number concentration (PNC), noise (Leq), and the gaseous co-pollutants: carbon monoxide, nitrogen dioxide, and ozone. Mean work shift PM2.5 concentrations (gravimetric measurements) ranged from 20.3 to 321 μg m(-3) (mean 62 μg m(-3)) and PNC were between 1.6×10(4) and 4.1×10(5) particles cm(-3) (8.9×10(4) particles cm(-3)). Noise levels were generally high with Leq over work shifts from 73.3 to 96.0 dB(A); the averaged Leq over all work shifts was 87.2 dB(A). The highest exposure to fine and ultrafine particles was measured during grass mowing and lumbering when motorized brush cutters and chain saws were used. Highest noise levels, caused by pneumatic hammers, were measured during paving and guardrail repair. We found moderate Spearman correlations between PNC and PM2.5 (r = 0.56); PNC, PM2.5, and CO (r = 0.60 and r = 0.50) as well as PNC and noise (r = 0.50). Variability and correlation of parameters were influenced by work activities that included equipment causing combined air pollutant and noise emissions (e.g. brush cutters and chain saws). We conclude that highway maintenance workers are frequently exposed to elevated airborne particle and noise levels compared with the average population. This elevated exposure is a consequence of the permanent proximity to highway traffic with additional peak exposures caused by emissions of the work-related equipment.
Resumo:
Risperidone is metabolized by polymorphic enzymes, and a large variability in plasma concentration and therapeutic response is observed. Risperidone long-acting injection (RLAI) avoids the first-pass effect, and little is known about the influence of gene polymorphisms involved in its pharmacokinetics. The influence on plasma concentrations of risperidone (RIS), its metabolite 9-hydroxy-risperidone, and on adverse effects were investigated for polymorphisms of cytochrome P450 2D6 (CYP2D6) (*3, *4, *5, *6), CYP3A (CYP3A4*1B, CYP3A4 rs4646437, CYP3A5*3, CYP3A7*1C), ABCB1 (1236C>T, 2677G>T, 3435C>T), NR1/2 coding for pregnane X receptor (rs1523130, rs2472677, rs7643645), and for CYP3A activity measured by a phenotyping test. Forty-two patients with at least 4 consecutive unchanged doses of RLAI were included in a multicenter cross-sectional study. A 55% lower dose-adjusted plasma levels of RIS were observed for CYP2D6 ultrarapid metabolizers (n = 5) as compared with CYP2D6 intermediate metabolizers (P < 0.007). NR1/2 polymorphism (rs7643645A>G) influenced RIS exposure with a 2.8-fold lower active moiety (P = 0.031) in GG compared with the AA genotype. This was confirmed in a second independent cohort (n = 16). Furthermore, high-density lipoprotein cholesterol was positively correlated with CYP3A activity (P = 0.01), and the NR1/2 (rs2472677) polymorphism was associated with different adverse effects including prolactin plasma levels adjusted for age and sex. In conclusion, our results confirmed the influence of CYP2D6 genotype on plasma levels of RIS. This is the first report on the influence of NR1/2 polymorphisms on RLAI exposure and on drug-induced adverse effects. These results should be validated in larger cohorts.
Resumo:
PURPOSE: Few studies compare the variabilities that characterize environmental (EM) and biological monitoring (BM) data. Indeed, comparing their respective variabilities can help to identify the best strategy for evaluating occupational exposure. The objective of this study is to quantify the biological variability associated with 18 bio-indicators currently used in work environments. METHOD: Intra-individual (BV(intra)), inter-individual (BV(inter)), and total biological variability (BV(total)) were quantified using validated physiologically based toxicokinetic (PBTK) models coupled with Monte Carlo simulations. Two environmental exposure profiles with different levels of variability were considered (GSD of 1.5 and 2.0). RESULTS: PBTK models coupled with Monte Carlo simulations were successfully used to predict the biological variability of biological exposure indicators. The predicted values follow a lognormal distribution, characterized by GSD ranging from 1.1 to 2.3. Our results show that there is a link between biological variability and the half-life of bio-indicators, since BV(intra) and BV(total) both decrease as the biological indicator half-lives increase. BV(intra) is always lower than the variability in the air concentrations. On an individual basis, this means that the variability associated with the measurement of biological indicators is always lower than the variability characterizing airborne levels of contaminants. For a group of workers, BM is less variable than EM for bio-indicators with half-lives longer than 10-15 h. CONCLUSION: The variability data obtained in the present study can be useful in the development of BM strategies for exposure assessment and can be used to calculate the number of samples required for guiding industrial hygienists or medical doctors in decision-making.