Application of a serum/protein-free medium for the growth of mammalian cell lines and high level production of classical, variant and very virulent strain of infectious bursal disease virus (IBDV)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of the density and of the distance of Brachiaria decumbens staff on the initial growth of Coffea arabica L. Seedligns

The aim of this work was to evaluate the interference of three densities (4, 8 and 16 plants/m 2) of Brachiaria decumbens Stapf distributed at three different distances (0, 10 and 20 cm from coffee plants) on the initial growth of Coffea arabica L. seedlings. Dark red Latosoil was used as substrate to fill up 70 liters cement boxes. Coffee seedlings at 15 cm height and 8 leaves stage were planted in each box. B. decumbens seedlings were transplanted when they reached two to four leaves stage. The experimental design was a randomized blocks with ten treatments and three replications. At the end of the experiment were measured, height, leaf number, leaf area, chlorophyll content and dry weight of coffee plants. Dry weight of B. decumbens leaves was also evaluated. The leaf area and leaf dry weight was shown to be more sensitive parameters to the interference of Brachiaria plants. Dry weight of coffee plants were reduced from 60% to 88% when the B. decumbens were transplanted 0 cm from the coffee plant. With distance of 10 cm the reduction of dry weight increased with the increase of the density of the B. decumbens. In the coexistence of the coffee plants with 16 plants/m 2 of B. decumbens, there was a reduction in the dry weight of about 80% at the distances of 0 and 20 cm. Regarding leaf area, the reduction was 47% on the average in the density of 4 plants/m 2 of B. decumbens The reduction in leaf area at other densities was higher at the distance of 0 and 20 cm, and 55% reduction was obtained at the distance of 10 cm.

Growth of Chrysanthemum grandiflorum in different peats and change of peat properties during cultivation

Marketable chrysanthemums were produced in several different peat types. Only the plants in one of the dredged frozen black peats and one of the milled white peats had a significant lower shoot dry weight than those in one of the sod and milled white peats, respectively. As the N-contents of the fertilized peats show neither deficiency nor excess in nutrient supply, possibly they are not the reason for the differences in shoot dry weight. The air capacity, which is extremely low in both dredged frozen black peats and dropped further during the cultivation period due to decomposition, also cannot explain the differences in shoot dry weight sufficiently (R2=0.44*; n=12). A close linear negative correlation (R2=0.77** n=12) was found between the CAT (VDLUFA) soluble Fe and the shoot dry weight. Therefore, the Fecontents might be a quality factor of peat to be used as a growing medium.

Seedling growth of Schizolobium parahyba on different substrates and irrigation levels

The present study aimed to assess the behavior of seedlings of Schizolobium parahyba (Vell.) Blake growing on different substrates and irrigation levels, and to study the use of urban waste compost in substrates. The experiment was carried out in the College of Agricultural Sciences, Universidade Estadual Paulista (UNESP), Department of Agricultural Engineering, Jaboticabal Campus, state of São Paulo, Brazil. The experimental design used was completely randomized, consisting of 30 treatments in a factorial design with 15 substrates and two irrigation levels in four replicates. The substrates were composed of different materials: urban waste, Plantmax®, dry cattle manure, vermiculite and soil. For the study of seedling growth, the following characteristics were evaluated: height (H), root-collar diameter (D), number of leaves, shoot dry weight, root dry weight, total dry weight, H/D ratio, Dickson's quality index, and the ratio between height and shoot dry weight (H/SDW). Assessments of the first three characteristics were carried out 20, 35, 50 and 65 days after sowing. Results showed that urban waste compost increased the growth of Schizolobium parahyba. There were significant differences for the irrigation levels tested; with better results for 150% ET compared to 100% ET irrigation level.

Modeling the growth of LT and TL-oriented fatigue cracks in longitudinally and transversely pre-strained Al 2524-T3 alloy

The aluminum alloy 2524 (Al-Cu-Mg) was developed during the 90s mainly to be employed in aircraft fuselage panels, replacing the standard Al 2024. In the present analysis the fatigue crack growth (FCG) behavior of 2524-T3 was investigated, regarding the influence of three parameters: load ratio, pre strain and crack plane orientation of the material. The pre strain of aluminum alloys is usually performed in order to obtain a more homogeneous precipitates distribution, accompanied by an increase in the yield strength. In this work, it was evaluated the resistance of Al 2524-T3 sheet samples to the fatigue crack growth, having L-T and T-L crack orientations. FCG tests were performed under constant amplitude loading at three distinct positive load ratios. The three material conditions were tested: as received(AR), pre strained longitudinally (SL) and transversally (ST) in relation to rolling direction. In order to describe FCG behavior, two-parameter kinetic equations were compared: a Paris-type potential model and a new exponential equation introduced in a previous work conducted by our research group. It was observed that the exponential model, which takes into account the deviations from linearity presented by da/dN versus AK data, describes more adequately the FCG behavior of Al 224-T3 in relation to load ratio, pre strain effects and crack plane orientation. © 2011 Published by Elsevier Ltd.

Unusually rapid growth of brown tumour in the mandible after parathyroidectomy associated with the presence of a supernumerary parathyroid gland

The aim of this study is to report the case of a quick growing brown tumour in the jaw after a parathyroidectomy due to the presence of a rare fifth parathyroid gland. The patient had chronic renal disease and the diagnosis was tertiary hyperparathyroidism. Thirty days after the parathyroidectomy, the patient returned with a significant increase in the tumour size. The suspicion of a supernumerary gland was confirmed by parathyroid scintigraphy. The treatment of brown tumour is dependent on the treatment of the hyperparathyroidism. However, curettage should be considered if a large lesion is disturbing mastication. In conclusion, this case should attract the attention of general practitioner dentists, since they may be the first professionals who have contact with the patient with a brown tumour in the jaws. Likewise, this case emphasises the importance of knowing the type of hyperparathyroidism involved to allow for effective treatment planning. © 2011 European Association for Cranio-Maxillo-Facial Surgery.

Influence of enclosure size on growth of breast and leg muscle fibers in domestic fowl

This experiment evaluated the growth of breast and leg muscle fibers of domestic fowl raised in two enclosure sizes (SE: Small Enclosure, 1.125 m2/10 birds; LE: Large Enclosure, 5.25 m2/10 birds). In breast muscles, the number of fibers per area decreased over time and higher values were observed in broilers housed in SE compared to LE. The fiber size increased with age and was greater in LE than SE at 56 days of age, suggesting greater hypertrophic growth of fibers in breast muscle for broilers maintained in LE. In leg muscles, the muscle cross-sectional area was greater for broilers raised in LE than SE at 56 days of age and decreased from 42 to 56 days of age in broilers raised in SE, suggesting leg muscle atrophy in these birds. The Fast Glycolytic (FG), Fast Oxidative-Glycolytic (FOG) and Slow Oxidative (SO) fibers grew until 42 days of age in both enclosure sizes. The area of FOG fibers was greater in broilers raised in LE than those in SE at 28 and 56 days of age; in LE-raised broilers, the SO area was greater at 28, 42 and 56 days of age, suggesting that the muscles of broilers housed in LE are more oxidative. The BW gain was greater for broilers raised in LE than SE, whereas BW, feed intake and feed conversion were not influenced by enclosure size. Thus, the enclosure space affected hypertrophic growth and metabolic characteristics of breast and leg muscle fibers. © Asian Network for Scientific Information, 2012.

Influence of mineralizer agents on the growth of crystalline CeO 2 nanospheres by the microwave-hydrothermal method

Cystalline ceria (CeO2) nanoparticles have been synthesized by a simple and fast microwave-assisted hydrothermal (MAH) under NaOH, KOH, and NH4OH mineralizers added to a cerium ammonium nitrate aqueous solution. The products were characterized by X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transformed-IR and Raman spectroscopies. Rietveld refinement reveals a cubic structure with a space group Fm3m while infrared data showed few traces of nitrates. Field emission scanning microcopy (FEG-SEM) revealed a homogeneous size distribution of nanometric CeO2 nanoparticles. The MAH process in KOH and NaOH showed most effective to dehydrate the adsorbed water and decrease the hydrogen bonding effect leaving a weakly agglomerated powder of hydrated ceria. TEM micrographs of CeO2 synthesized under MAH conditions reveal particles well-dispersed and homogeneously distributed. The MAH enabled cerium oxide to be synthesized at 100 °C for 8 min. © 2012 Elsevier B.V. All rights reserved.

Growth of TiO2 nanotubes by anodization of Ti-7.5Mo in NH 4F solutions

Titanium and its alloys are widely used as biomaterials due to their mechanical, chemical and biological properties. To enhance the biocompatibility of titanium alloys, various surface treatments have been proposed. In particular, the formation of titanium oxide nanotubes layers has been extensively examined. According to the literature, it is possible to induce the growth of TiO2 on the surface of titanium, employing the aqueous anodizing electrolyte. This Ti-7.5Mo alloy was anodized in glycerol electrolytes containg 0.25 wt% of NH4F, with variations in time, voltage and calcinations temperature. After anodization, the sample surfaces were analyzed with a field emission scanning electron microscopy, DRX and contact angle measurements. It was possible to observe the formation of TiO2 on the surface and these findings represent a simple surface treatment for Ti alloys that has high potential for biomedical applications. Copyright © 2013 American Scientific Publishers. All rights reserved.

Onset of sexual maturity and relative growth of the freshwater crab Trichodactylus fluviatilis (Trichodactyloidea) in south-eastern Brazil

The main purpose of this study was to provide an estimate for the onset of morphological sexual maturity in the freshwater crab Trichodactylus fluviatilis, from a population located in south-eastern Brazil, based on the relative growth relationships, as well as the characterization of ''handedness''. Monthly collections were carried out at night, from January 2006 to January 2007, in a small water body. In the laboratory, the crabs were sexed; the following body structures were measured and the estimate of onset of sexual maturity was given by the logistic function, as y a/(1\+becx), for 50% of the population to reach the adult phase (CW50carapace width). Right propodus length and abdomen width were the best-fit relationships to represent the onset of sexual maturity for males and females, respectively. Based on the logistic function, the onset of sexual maturity was estimated to occur at around 18mm CW for both sexes. The relative growth recorded for this species is consistent with the model for brachyuran crabs (Hartnoll RG. 1982, Growth. In: Bliss, DE, editor. The biology of Crustacea: embryology, morphology and genetics. New York: Academic Press. p. 111-196), except for the abdomen growth, which is likely to be an adaptive condition related to protection of the newly hatched young. © 2013 Taylor & Francis.

Influence of densities on the growth of brown mussel Perna perna L. cultivated in suspended socks at Caraguatatuba, southeastern Brazil

This study was carried out in a marine area at Cocanha Beach, Caraguatatuba, southeastern Brazil, aiming to determine the most appropriated density for brown mussel (Perna perna L.) cultured in suspended socks (French System), in order to reduce costs with acquisition of juvenile mussels (seed) and labor. In September 2007, 15 socks measuring 2 m each were reared at densities of 300, 400 and 500 seeds/m. After 250 days, mussels were harvested and separated in two length classes: non-commercial (<6 cm) and commercial (≥6 cm). Mussels were counted and weighed. In August 2008, the experiment was repeated with 1-m-long socks at lower densities (200, 250 and 300 seeds/m) in order to identify differences among commercial-sized mussels only. Data were analyzed by ANOVA or nonparametric Kruskal-Wallis test, followed by Tukey or SNK tests, respectively. The results suggest that it is feasible to use densities from 250 to 300 seeds/m, since biomass yields are similar to those registered at higher densities and the use of mussel seed is therefore optimized. © 2013 Springer Science+Business Media Dordrecht.

Effects of soil and foliar application of soluble silicon on mineral nutrition, gas exchange, and growth of potato plants

Silicon can alleviate biotic and abiotic stresses in several crops, and it has beneficial effects on plants under nonstressed conditions. However, there is still doubt about foliar-applied Si efficiency and Si effects on mineral nutrition, physiological processes, and growth of potato (Solanum tuberosum L.) plants under wellwatered conditions. The objective of this study was to evaluate the effect of soil and foliar application of soluble Si on Si accumulation, nutrients, and pigments concentration as well as gas exchange and growth of potato plants. The experiment was conducted under greenhouse conditions in pots containing 35 dm3 of a Typic Acrortox soil. The treatments consisted of a control (no Si application), soil application of soluble Si (50 mg dm-3 Si), and foliar application of soluble Si (three sprays of 1.425 mM Si water solution, prepared with a soluble concentrate stabilized silicic acid), with eight replications. Both soil and foliar application of Si resulted in higher Si accumulation in the whole plant. Foliar application of Si resulted in the greatest Si concentration in leaves, and soil application increased Si concentration in leaves, stems, and roots. Silicon application, regardless of the application method, increased leaf area, specific leaf area, and pigment concentration (chlorophyll a and carotenoids) as well as photosynthesis and transpiration rates of wellwatered potato plants. However, only soil application increased P concentration in leaves and dry weight of leaves and stems. © Crop Science Society of America.

Growth of calcium phosphate coating on Ti-7.5Mo alloy after anodic oxidation

Titanium and its alloys are widely used as biomaterials due to their mechanical, chemical and biological properties. To enhance the biocompatibility of titanium alloys, various surface treatments have been proposed. In particular, the formation of titanium oxide nanotubes layers has been extensively examined. Among the various materials for implants, calcium phosphates and hydroxyapatite are widely used clinically. In this work, titanium nanotubes were fabricated on the surface of Ti-7.5Mo alloy by anodization. The samples were anodized for 20 V in an electrolyte containing glycerol in combination with ammonium fluoride (NH4F, 0.25%), and the anodization time was 24 h. After being anodized, specimens were heat treated at 450 °C and 600°C for 1 h to crystallize the amorphous TiO2 nanotubes and then treated with NaOH solution to make them bioactive, to induce growth of calcium phosphate in a simulated body fluid. Surface morphology and coating chemistry were obtained respectively using, field-emission scanning electron microscopy (FEG-SEM), AFM and X-ray diffraction (XRD). It was shown that the presence of titanium nanotubes induces the growth of a sodium titanate nanolayer. During the subsequent invitro immersion in a simulated body fluid, the sodium titanate nanolayer induced the nucleation and growth of nano-dimensioned calcium phosphate. It was possible to observe the formation of TiO2 nanotubes on the surface of Ti-7.5Mo. Calcium phosphate coating was greater in the samples with larger nanotube diameter. These findings represent a simple surface treatment for Ti-7.5Mo alloy that has high potential for biomedical applications. © (2013) Trans Tech Publications, Switzerland.

Growth of euterpe oleracea seedlings under different color nets and light conditions

Euterpe oleracea, a native palm to the Amazon, has recognized trading importance because of its fruits and heart of palm. However, it still requires general information on its propagation and cultivation. As light is essential for plant growth, this work aimed to study the effect of different color nets and light conditions on the initial growth of E. oleracea, with the objective to obtain high quality seedlings. The experiment was conducted in Jaboticabal County, São Paulo State, Brazil. The experimental design was entirely randomized, with six treatments (six light conditions: red net with 50% of shading - red Chromatinet®; blue net with 50% of shading - blue Chromatinet®; black nets with 70, 50 or 30% of shading; and full sun) and six replications (six evaluation periods: 30, 60, 90, 120, 150 and 180 days after the beginning of the experiment). Each plot consisted of four pots with one plant per pot, resulting in 144 plants. Seedling growth was monthly evaluated by collecting four plants per replication until the end of the experiment. Shoot length, root length, stem diameter, leaf number, leaf area and root and shoot dry matter were evaluated. The best quality seedlings of E. oleracea were obtained when they were cultivated under the black net with 50% of shading.

Plant regulators on vegetative growth of 'Tommy Atkins' mangoes

Paclobutrazol applied to the soil is used for the production management of mango in most of orchards on the semiarid region. However, it is necessary to identify other plant growth regulators that might be applied to the leaves, so as to minimize the risk of residues in the soil and plant. The present paper has the purpose to evaluate the effect of plant regulators in the management of vegetative growth on mangoes 'Tommy Atkins'. Three plant growth regulators, sprayed to the leaves, were evaluated: prohexadione-Ca, ethyl-trinexapac and chlormequat chloride, applied in two dosages, and compared to paclobutrazol applied to the soil. In order to compare the effects of the treatment, data were recorded on the vegetative growth (number and length of the shoots). Furthermore, the levels of gibberellins in the apical area of the shoots of 'Tommy Atkins' were quantified, from the beginning of the experiment until the beginning of floral induction. The results showed that sprayings with prohexadione-Ca, trinexapac-ethyl and chlormequat chloride in a dosage of 1.5 g a.i. plant-1 plant was as efficient as a dose of 4.0 g a.i. plant-1 of paclobutrazol applied to the soil, regarding the regulation of vegetative growth of 'Tommy Atkins'. © ISHS 2013.