Recoverable rhodium nanoparticles: Synthesis, characterization and catalytic performance in hydrogenation reactions

We here report the first magnetically recoverable Rh(0) nanoparticle-supported catalyst with extraordinary recovery and recycling properties. Magnetic separation has been suggested as a very promising technique to improve recovery of metal-based catalysts in liquid-phase batch reactions. The separation method is significantly simple, as it does not require filtration, decantation, centrifugation, or any other separation technique thereby, overcoming traditional time- and solvent-consuming procedures. Our new magnetically separable catalytic system, comprised of Rh nanoparticles immobilized on silica-coated magnetite nanoparticles, is highly active and could be reused for up to 20 times for hydrogenation of cyclohexene (180,000 mol/mol(Rh)) and benzene (11,550 mol/mol(Rh) under mild conditions. (c) 2007 Elsevier B. V. All fights reserved.

Synthesis of NiO-MgO-ZrO(2) catalysts and their performance in reforming of model biogas

Catalysts containing NiO/MgO/ZrO(2) mixtures were synthesized by the polymerization method in a single step. They were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR) and physisorption of N(2) (BET) and then tested in the reforming of a model biogas (1.5CH4:1CO(2)) in the presence of air (1.5CH(4) + 1CO(2) + 0.25O(2)) at 750 degrees C for 6h. It was observed that the catalyst Ni20MZ performed better in catalytic processes than the well known catalysts, Ni/ZrO(2) and Ni/MgO, synthesized under the same conditions. The formation of solid solutions, MgO-ZrO(2) and NiO-MgO, increased the rate of conversion of reactants (CH(4) and CO(2)) into synthesis gas (H(2) + CO). The formation of oxygen vacancies (in samples containing ZrO(2) and MgO) seems to promote removal of the coke deposited on the nickel surface. The values of the H(2)/CO ratio were generally found to be slightly lower than stoichiometric, owing to the reverse water gas shift reaction occurring in parallel. (C) 2011 Elsevier B.V. All rights reserved.

Physical Vapor Deposited Thin Films of Lignins Extracted from Sugar Cane Bagasse: Morphology, Electrical Properties, and Sensing Applications

The concern related to the environmental degradation and to the exhaustion of natural resources has induced the research on biodegradable materials obtained from renewable sources, which involves fundamental properties and general application. In this context, we have fabricated thin films of lignins, which were extracted from sugar cane bagasse via modified organosolv process using ethanol as organic solvent. The films were made using the vacuum thermal evaporation technique (PVD, physical vapor deposition) grown up to 120 nm. The main objective was to explore basic properties such as electrical and surface morphology and the sensing performance of these lignins as transducers. The PVD film growth was monitored via ultraviolet-visible (UV-vis) absorption spectroscopy and quartz crystal microbalance, revealing a linear relationship between absorbance and film thickness. The 120 nm lignin PVD film morphology presented small aggregates spread all over the film surface on the nanometer scale (atomic force microscopy, AFM) and homogeneous on the micrometer scale (optical microscopy). The PVD films were deposited onto Au interdigitated electrode (IDE) for both electrical characterization and sensing experiments. In the case of electrical characterization, current versus voltage (I vs V) dc measurements were carried out for the Au IDE coated with 120 nm lignin PVD film, leading to a conductivity of 3.6 x 10(-10) S/m. Using impedance spectroscopy, also for the Au IDE coated with the 120 nm lignin PVD film, dielectric constant of 8.0, tan delta of 3.9 x 10(-3)) and conductivity of 1.75 x 10(-9) S/m were calculated at 1 kHz. As a proof-of-principle, the application of these lignins as transducers in sensing devices was monitored by both impedance spectroscopy (capacitance vs frequency) and I versus time dc measurements toward aniline vapor (saturated atmosphere). The electrical responses showed that the sensing units are sensible to aniline vapor with the process being reversible. AFM images conducted directly onto the sensing units (Au IDE coated with 120 nm lignin PVD film) before and after the sensing experiments showed a decrease in the PVD film roughness from 5.8 to 3.2 nm after exposing to aniline.

Design/Evaluation of A Methodology For Performance Optimization Of Indexable Carbide Inserts

In this project, two broad facets in the design of a methodology for performance optimization of indexable carbide inserts were examined. They were physical destructive testing and software simulation.For the physical testing, statistical research techniques were used for the design of the methodology. A five step method which began with Problem definition, through System identification, Statistical model formation, Data collection and Statistical analyses and results was indepthly elaborated upon. Set-up and execution of an experiment with a compression machine together with roadblocks and possible solution to curb road blocks to quality data collection were examined. 2k factorial design was illustrated and recommended for process improvement. Instances of first-order and second-order response surface analyses were encountered. In the case of curvature, test for curvature significance with center point analysis was recommended. Process optimization with method of steepest ascent and central composite design or process robustness studies of response surface analyses were also recommended.For the simulation test, AdvantEdge program was identified as the most used software for tool development. Challenges to the efficient application of this software were identified and possible solutions proposed. In conclusion, software simulation and physical testing were recommended to meet the objective of the project.

"An on-going individual adjustment" : a qualitative study of midwives' experiences counselling pregnant women on physical activity in Sweden

Background: In Sweden, midwives play prominent supportive role in antenatal care by counselling and promoting healthy lifestyles. This study aimed to explore how Swedish midwives experience the counselling of pregnant women on physical activity, specifically focusing on facilitators and barriers during pregnancy. Also, addressing whether the midwives perceive that their own lifestyle and body shape may influence the content of the counselling they provide. Methods: Eight focus group discussions (FGD) were conducted with 41 midwives working in antenatal care clinics in different parts of Sweden between September 2013 and January 2014. Purposive sampling was applied to ensure a variation in age, work experience, and geographical location. The FGD were digitally recorded, transcribed verbatim, and analyzed using manifest and latent content analysis. Results: The main theme- "An on-going individual adjustment" was built on three categories: "Counselling as a challenge"; "Counselling as walking the thin ice" and "Counselling as an opportunity" reflecting the midwives on-going need to adjust their counselling depending on each woman's specific situation. Furthermore, counselling pregnant women on physical activity was experienced as complex and ambiguous, presenting challenges as well as opportunities. When midwives challenged barriers to physical activity, they risked being rejected by the pregnant women. Despite risking rejection, the midwives tried to promote increased physical activity based on their assessment of individual needs of the pregnant woman. Some participants felt that their own lifestyle and body shape might negatively influence the counselling; however, the majority of participants did not agree with this perspective. Conclusions: Counselling on physical activity during pregnancy may be a challenging task for midwives, characterized by on-going adjustments based on a pregnant woman's individual needs. Midwives strive to find individual solutions to encourage physical activity. However, to improve their counselling, midwives may benefit from further training, also organizational and financial barriers need to be addressed. Such efforts might result in improved opportunities to further support pregnant women's motivation for performance of physical activity.

Performance Evaluation Of SMOS Soil Moisture Retrieval Parameters For Hydrological Application

Microwave remote sensing has high potential for soil moisture retrieval. However, the efficient retrieval of soil moisture depends on optimally choosing the soil moisture retrieval parameters. In this study first the initial evaluation of SMOS L2 product is performed and then four approaches regarding soil moisture retrieval from SMOS brightness temperature are reported. The radiative transfer equation based tau-omega rationale is used in this study for the soil moisture retrievals. The single channel algorithms (SCA) using H polarisation is implemented with modifications, which includes the effective temperatures simulated from ECMWF (downscaled using WRF-NOAH Land Surface Model (LSM)) and MODIS. The retrieved soil moisture is then utilized for soil moisture deficit (SMD) estimation using empirical relationships with Probability Distributed Model based SMD as a benchmark. The square of correlation during the calibration indicates a value of R2 =0.359 for approach 4 (WRF-NOAH LSM based LST with optimized roughness parameters) followed by the approach 2 (optimized roughness parameters and MODIS based LST) (R2 =0.293), approach 3 (WRF-NOAH LSM based LST with no optimization) (R2 =0.267) and approach 1(MODIS based LST with no optimization) (R2 =0.163). Similarly, during the validation a highest performance is reported by approach 4. The other approaches are also following a similar trend as calibration. All the performances are depicted through Taylor diagram which indicates that the H polarisation using ECMWF based LST is giving a better performance for SMD estimation than the original SMOS L2 products at a catchment scale.

Human growth, biological maturation, motor performance and contextual factors in Madeira children

The central aims of this study were: (1) to construct age- and gender-specific percentiles for motor coordination (MC), (2) to analyze the change, stability, and prediction of MC, (3) to investigate the relationship between motor performance and body fatness, and (4) to evaluate the relationships between skeletal maturation and fundamental motor skills (FMS) and MC. The data collected was from the ‘Healthy Growth of Madeira Children Study’ and from the ‘Madeira Child Growth Study’. In these studies, MC, FMS, skeletal age, growth characteristics, motor performance, physical activity, socioeconomic status, and geographical area were assessed/measured. Generalized additive models for location, scale and shape, mixed between-within subjects ANOVA, multilevel models, and hierarchical regression (blocks) were some of the statistical procedures used in the analyses. Scores on walking backwards and moving sideways improved with age. It was also found that boys performed better than girls on moving sideways. Normal-weight children outperformed obese peers in almost all gross MC tests. Inter-age correlations were calculated to be between 0.15 and 0.60. Age was associated with a better performance in catching, scramble, speed run, standing long jump, balance, and tennis ball throwing. Body mass index was positively associated with scramble and speed run, and negatively related to the standing long jump. Physical activity was negatively associated with scramble. Semi-urban children displayed better catching skills relative to their urban peers. The standardized residual of skeletal age on chronological age (SAsr) and its interaction with stature and/or body mass accounted for the maximum of 7.0% of variance in FMS and MC over that attributed to body size per se. SAsr alone accounted for a maximum of 9.0% variance in FMS and MC over that attributed to body size per se and interactions between SAsr and body size. This study demonstrates the need to promote FMS, MC, motor performance, and physical activity in children.

Effect of acute administration of Clenbuterol on athletic performance in horses

The aim of the study was to determine the effect of clenbuterol on the anaerobic-threshold of horses on a tread-mill with increasing physical stress, measuring heart rate (HR) and blood levels of lactate, glucose, and insulin. Twelve Arabian horses. were submitted to two physical tests separated by a 10-day interval. Clenbuterol (CL) at 0.8 mu g/kg or saline (control-C) was administered intravenously 30 minutes, before the test. The treadmill exercise test consisted of an initial warmup followed by a gradually increasing effort. There was no statistical difference in either V-2 or V-4 (velocity at which plasma lactate concentration reached 4 and 2 mmol/L, respectively) between the two-experimental groups. For the CL group, V-200, V-180, V-160, and V-140 (velocity at which the rate heart is 140, 160, 180, and 200 beats/minute, respectively) decreased significantly. At rest as well as times 4, 6, and 10 minutes, insulin levels were higher in the group that recieved clenbuterol (P < .05). Contrary to what was expected, apparently, there was no improvement in aerobic metabolism in animals when given a therapeutic dose of the bronchodilator. The elevated heart rate observed could have been attributable to the stimulation of cardiac beta(1) adrenoceptors and the increased insulin levels to the stimulation of pancreatic beta(2) receptors.

Molecular architecture of thin films fabricated via physical vapor deposition and containing a poly(azo)urethane

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical Vapor Deposited Thin Films of Lignins Extracted from Sugar Cane Bagasse: Morphology, Electrical Properties, and Sensing Applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of a probiotic soy product and physical exercise on formation of pre-neoplastic lesions in rat colons in a short-term model of carcinogenic

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modeling a system of phosphated cross-linked high amylose for controlled drug release. Part 2: Physical parameters, cross-linking degrees and drug delivery relationships

High amylose cross-linked to different degrees with sodium trimetaphosphate by varying base strength (2% or 4%) and contact time (0.5-4 h) was evaluated as non-compacted systems for sodium diclophenac controlled release. The physical properties and the performance of these products for sodium diclophenac controlled release from non-compacted systems were related to the structures generated at each cross-linking degree. For samples at 2% until 2 h the swelling ability, G' and eta* values increased with the cross-linking degree, because the longer polymer chains became progressively more entangled and linked. This increases water uptake and holding, favoring the swelling and resulting in systems with higher viscosities. Additionally, the increase of cross-linking degree should contribute for a more elastic structure. The shorter chains with more inter-linkages formed at higher cross-linking degrees (2%4h and 4%) make water caption and holding difficult, decreasing the swelling, viscosity and elasticity. For 2% samples, the longer drug release time exhibited for 2%4h sample indicates that the increase of swelling and viscosity contribute for a more sustained drug release, but the mesh size of the polymeric network seems to be determinant for the attachment of drug molecules. For the 4% samples, smaller meshes size should determine less sustained release of drug. (C) 2008 Elsevier B.V. All rights reserved.

Hydrodynamic characterization and performance evaluation of an aerobic three phase airlift fluidized bed reactor in a recirculation aquaculture system for Nile Tilapia production

The hydrodynamic characterization and the performance evaluation of an aerobic three phase fluidized bed reactor in wastewater fish culture treatment are presented in this report. The objective of this study was to evaluate the organic matter, nitrogen and phosphorous removal efficiency in a physical and biological wastewater treatment system of an intensive Nile Tilapia laboratory production with recirculation. The treatment system comprised of a conventional sedimentation basin operated at a hydraulic detention time HDT of 2.94 h and an aerobic three phase airlift fluidized bed reactor AAFBR operated at an 11.9 min HDT. Granular activated carbon was used as support media with density of 1.64 g/cm(3) and effective size of 0.34 mm in an 80 g/L constant concentration. Mean removal efficiencies of BOD, COD, phosphorous, total ammonia nitrogen and total nitrogen were 47%, 77%, 38%, 27% and 24%, respectively. The evaluated system proved an effective alternative for water reuse in the recirculation system capable of maintaining water quality characteristics within the recommended values for fish farming and met the Brazilian standards for final effluent discharges with exception of phosphorous values. (C) 2011 Elsevier B.V. All rights reserved.

Haematological response and growth performance of Nile tilapia (Oreochromis niloticus L.) fed diets containing folic acid

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relationship Among Phenolic Contents, Seed Predation, and Physical Seed Traits in Mimosa bimucronata Plants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)