Fractionation, chemical and toxicological characterization of tobacco smoke components

La fumée du tabac est un aérosol extrêmement complexe constitué de milliers de composés répartis entre la phase particulaire et la phase vapeur. Il a été démontré que les effets toxicologiques de cette fumée sont associés aux composés appartenant aux deux phases. Plusieurs composés biologiquement actifs ont été identifiés dans la fumée du tabac; cependant, il n’y a pas d’études démontrant la relation entre les réponses biologiques obtenues via les tests in vitro ou in vivo et les composés présents dans la fumée entière du tabac. Le but de la présente recherche est de développer des méthodes fiables et robustes de fractionnement de la fumée à l’aide de techniques de séparation analytique et de techniques de détection combinés à des essais in vitro toxicologiques. Une étude antérieure réalisée par nos collaborateurs a démontré que, suite à l’étude des produits de combustion de douze principaux composés du tabac, l’acide chlorogénique s’est avéré être le composé le plus cytotoxique selon les test in vitro du micronoyau. Ainsi, dans cette étude, une méthode par chromatographie préparative en phase liquide a été développée dans le but de fractionner les produits de combustion de l’acide chlorogénique. Les fractions des produits de combustion de l’acide chlorogénique ont ensuite été testées et les composés responsables de la toxicité de l’acide chlorogénique ont été identifiés. Le composé de la sous-fraction responsable en majeure partie de la cytoxicité a été identifié comme étant le catéchol, lequel fut confirmé par chromatographie en phase liquide/ spectrométrie de masse à temps de vol. Des études récentes ont démontré les effets toxicologiques de la fumée entière du tabac et l’implication spécifique de la phase vapeur. C’est pourquoi notre travail a ensuite été focalisé principalement à l’analyse de la fumée entière. La machine à fumer Borgwaldt RM20S® utilisée avec les chambres d’exposition cellulaire de British American Tobacco permettent l’étude in vitro de l’exposition de cellules à différentes concentrations de fumée entière du tabac. Les essais biologiques in vitro ont un degré élevé de variabilité, ainsi, il faut prendre en compte toutes les autres sources de variabilité pour évaluer avec précision la finalité toxicologique de ces essais; toutefois, la fiabilité de la génération de la fumée de la machine n’a jamais été évaluée jusqu’à maintenant. Nous avons donc déterminé la fiabilité de la génération et de la dilution (RSD entre 0,7 et 12 %) de la fumée en quantifiant la présence de deux gaz de référence (le CH4 par détection à ionisation de flamme et le CO par absorption infrarouge) et d’un composé de la phase particulaire, le solanesol (par chromatographie en phase liquide à haute performance). Ensuite, la relation entre la dose et la dilution des composés de la phase vapeur retrouvée dans la chambre d’exposition cellulaire a été caractérisée en utilisant une nouvelle technique d’extraction dite par HSSE (Headspace Stir Bar Sorptive Extraction) couplée à la chromatographie en phase liquide/ spectrométrie de masse. La répétabilité de la méthode a donné une valeur de RSD se situant entre 10 et 13 % pour cinq des composés de référence identifiés dans la phase vapeur de la fumée de cigarette. La réponse offrant la surface maximale d’aire sous la courbe a été obtenue en utilisant les conditions expérimentales suivantes : intervalle de temps d’exposition/ désorption de 10 0.5 min, température de désorption de 200°C pour 2 min et température de concentration cryogénique (cryofocussing) de -75°C. La précision de la dilution de la fumée est linéaire et est fonction de l’abondance des analytes ainsi que de la concentration (RSD de 6,2 à 17,2 %) avec des quantités de 6 à 450 ng pour les composés de référence. Ces résultats démontrent que la machine à fumer Borgwaldt RM20S® est un outil fiable pour générer et acheminer de façon répétitive et linéaire la fumée de cigarette aux cultures cellulaires in vitro. Notre approche consiste en l’élaboration d’une méthodologie permettant de travailler avec un composé unique du tabac, pouvant être appliqué à des échantillons plus complexes par la suite ; ex : la phase vapeur de la fumée de cigarette. La méthodologie ainsi développée peut potentiellement servir de méthode de standardisation pour l’évaluation d’instruments ou de l’identification de produits dans l’industrie de tabac.

What are the components of humanized childbirth in a highly specialized hospital? : an organizational case study

Many studies have focused on the concept of humanization of birth in normal pregnancy cases or at low obstetric risk, but no studies, at our knowledge, have so far specifically focused on the humanization of birth in both high-risk, and low risk pregnancies, in a highly specialized hospital setting. The present study thus aims to: 1) define the specific components of the humanized birth care model which bring satisfaction to women who seek obstetrical care in highly specialized hospitals; and 2) explore the organizational and cultural dimensions which act as barriers or facilitators for the implementation of humanized birth care practices in a highly specialized, university affiliated hospital in Quebec. A single case study design was chosen for this thesis. The data were collected through semi-structured interviews, field notes, participant observations, selfadministered questionnaire, relevant documents, and archives. The samples comprised: 11 professionals from different disciplines, 6 administrators from different hierarchical levels within the hospital, and 157 women who had given birth at the hospital during the study. The performed analysis covered both quantitative descriptive and qualitative deductive and inductive content analyses. The thesis comprises three articles. In the first article, we proposed a conceptual framework, based on Allaire and Firsirotu’s (1984) organizational culture theory. It attempts to examine childbirth patterns as an organizational cultural phenomenon. In our second article, we answered the following specific question: according to the managers and multidisciplinary professionals practicing in a highly specialized hospital as well as the women seeking perinatal care in this hospital setting, what is the definition of humanized care? Analysis of the data collected uncovered the following themes which explained the perceptions of what humanized birth was: personalized care, recognition of women’s rights, humanly care for women, family-centered care,women’s advocacy and companionship, compromise of security, comfort and humanity, and non-stereotyped pregnancies. Both high and low risk women felt more satisfied with the care they received if they were provided with informed choices, were given the right to participate in the decision-making process and were surrounded by competent care providers. These care providers who humanly cared for them were also able to provide relevant medical intervention. The professionals and administrators’ perceptions of humanized birth, on the other hand, mostly focused on personalized and family-centered care. In the third article of the thesis, we covered the dimensions of the internal and external components of an institution which can act as factors that facilitate or barriers that prevent, a specialized and university affiliated hospital in Quebec from adopting a humanized child birthing care. The findings revealed that both the external dimensions of a highly specialized hospital -including its history, society, and contingency-; and its internal dimensions -including culture, structure, and the individuals present in the hospital-, can all affect the humanization of birth care in such an institution, whether separately, simultaneously or in interaction. We thus hereby conclude that the humanization of birth care in a highly specialized hospital setting, should aim to meet all the physiological, as well as psychological aspects of birth care, including respect of the fears, beliefs, values, and needs of women and their families. Integration of competent and caring professionals and the use of obstetric technology to enhance the level of certainty and assurance in both high-risk and low risk women are both positive factors for the implementation of humanized care in a highly specialized hospital. Finally, the humanization of birth care approach in a highly specialized and university affiliated hospital setting demands a new healthcare policy. Such policy must offer a guarantee for women to have the place of birth, and the health care professional of their choice as well as those, which will enable women to make informed choices from the beginning of their pregnancy.

Components of reaching and grasping an object may emerge following a single minimization process

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.

Fabrication and Characterization of All-Fiber Components for Optical Access Networks

This Thesis deals with the fabrication and characterization of novel all-fiber components for access networks. All fiber components offer distinctive advantages due to low forward and backward losses, epoxy free optical path and high power handling. A novel fabrication method for monolithic 1x4 couplers, which are vital components in distributed passive optical networks, is realized. The fabrication method differs from conventional structures with a symmetric coupling profile and hence offers ultra wideband performance and easy process control. New structure for 1x4 couplers, by fusing five fibers is proposed to achieve high uniformity, which gives equivalent uniformity performance to 1x4 planar lightwave splitters, isolation in fused fiber WDM is improved with integration of long period gratings. Packaging techniques of fused couplers are analyzed for long term stability.

Vocational Higher Secondary Education in Kerala: A Status Study of Students, Pass Outs and Training Components

This study analyses the socio-economic backgrounds and entrepreneurial profiles of the students and pass outs of the Vocational Higher Secondary Education in Kerala and the academic achievements of the Vocational Higher Secondary students and pass outs in Kerala in terms of their performance in the examinations. The study also analyses the quality and availability of the various training and support facilities of the Vocational Higher Secondary Schools in Kerala, nature and rate of employment and higher studies among the pass outs of the Vocational Higher Secondary Education in Kerala and the awareness of students, pass outs, teachers and principals regarding the goals and objectives, mode of implementation, apprenticeship training and higher study and employment opportunities of the programme of the Vocational Higher Secondary Education in Kerala.

Study of the Oceanic Heat Budget Components over the Arabian Sea during the Formation and Evolution of Super Cyclone, Gonu

Oceans play a vital role in the global climate system. They absorb the incoming solar energy and redistribute the energy through horizontal and vertical transports. In this context it is important to investigate the variation of heat budget components during the formation of a low-pressure system. In 2007, the monsoon onset was on 28th May. A well- marked low-pressure area was formed in the eastern Arabian Sea after the onset and it further developed into a cyclone. We have analysed the heat budget components during different stages of the cyclone. The data used for the computation of heat budget components is Objectively Analyzed air-sea flux data obtained from WHOI (Woods Hole Oceanographic Institution) project. Its horizontal resolution is 1° × 1°. Over the low-pressure area, the latent heat flux was 180 Wm−2. It increased to a maximum value of 210 Wm−2 on 1st June 2007, on which the system was intensified into a cyclone (Gonu) with latent heat flux values ranging from 200 to 250 Wm−2. It sharply decreased after the passage of cyclone. The high value of latent heat flux is attributed to the latent heat release due to the cyclone by the formation of clouds. Long wave radiation flux is decreased sharply from 100 Wm−2 to 30 Wm−2 when the low-pressure system intensified into a cyclone. The decrease in long wave radiation flux is due to the presence of clouds. Net heat flux also decreases sharply to −200 Wm−2 on 1st June 2007. After the passage, the flux value increased to normal value (150 Wm−2) within one day. A sharp increase in the sensible heat flux value (20 Wm−2) is observed on 1st June 2007 and it decreased there- after. Short wave radiation flux decreased from 300 Wm−2 to 90 Wm−2 during the intensification on 1st June 2007. Over this region, short wave radiation flux sharply increased to higher value soon after the passage of the cyclone.

Behaviour of mrigal (cirrihinus mrigala) meat components during the washing process in the preparation of surimi

To elucidate the effect of washing, on flesh components, mrigal flesh was washed through one, two and three washing cycles. Washing resulted in absorption of water (1-3%) and loss of fat (49%). 35% loss of soluble protein (SP) was noticed in the first washing itself and the loss is almost equally shared by the sarcoplasmic (18% of SP) and the myofibrillar proteins (17% of SP). The subsequent washings removed small portions of water-soluble sarcoplasmic proteins resulting in the concentration of myofibrillar proteins. 73% of the soluble protein was retained in the flesh after three washing cycles. The protein had undergone marginal conformational changes as reflected by the decrease in the actomyosin Ca super(2+) ATPase activity The rheological properties of the washed flesh were,however, significantly better than that of the unwashed mince

Unveiling the components of the signaling pathway between endosomes and the phagocytic uptake machinery in Dictyostelium discoideum

The soil amoebae Dictyostelium discoideum take up particles from their environment in order to obtain nutrition. The particle transits through the cell within a phagosome that fuses with organelles of different molecular compositions, undergoing a gradual degradation by different sets of hydrolytic enzymes. Griffiths’ concept of “phagosome individuality” predicts signaling from phagosomes into the cytoplasm, which might regulate many aspects of cell physiology. The finding that Dictyostelium cells depleted of the lysozyme AlyA or over-expressing the esterase Gp70 exhibit increased uptake of food particles, led to the postulation of a signaling cascade between endocytic compartments and the cytoskeletal uptake machinery at the plasma membrane. Assuming that Gp70 acts downstream of AlyA, gene-expression profiling of both mutants revealed different and overlapping sets of misregulated genes that might participate in this signaling cascade. Based on these results, we analyzed the effects of the artificial misregulation of six candidate genes by over-expression or negative genetic interference, in order to reconstruct at least part of the signaling pathway. SSB420 and SSL793 were chosen as candidates for the first signaling step, as they were up-regulated in AlyA-null cells and remained unaltered in the Gp70 over-expressing cells. The over-expression of SSB420 enhanced phagocytosis and raised the expression levels of Gp70, supporting its involvement in the signaling pathway between AlyA and Gp70 as a positive regulator of phagocytosis. However, this was not the case of cells over-expressing SSL793, as this mutation had no effects on phagocytosis. For the signaling downstream of Gp70, we studied four commonly misregulated genes in AlyA-depleted and Gp70 over-expressing cells. The expression levels of SLB350, SSB389 and TipD were lower in both mutants and therefore these were assumed as possible candidates for the negative regulation of phagocytosis. Cells depleted of SLB350 exhibited an increased phagocytic activity and no effect on Gp70 expression, proving its participation in the signaling pathway downstream of Gp70. Unlike SLB350, the disruption of the genes coding for SSB389 and TipD had no effects on particle uptake, excluding them from the pathway. The fourth candidate was Yipf1, the only gene that was commonly up-regulated in both mutants. Yet, the artificial over-expression of this protein had no effects on phagocytosis, so this candidate is also not included in the signaling pathway. Furthermore, localizing the products of the candidate genes within the cell helped unveiling several cellular organelles that receive signals from the phagosome and transduce them towards the uptake machinery.

Identifying the component structure of job satisfaction by principal components analysis among extension officers in North West Province, South Africa

The component structure of a 34-item scale measuring different aspects of job satisfaction was investigated among extension officers in North West Province, South Africa. A simple random sampling technique was used to select 40 extension officers from which data were collected. A structured questionnaire consisting of 34 job satisfaction and 10 personal characteristic items was administered to the extension officers. Items on job satisfaction were measured at interval level and analyzedwith Principal ComponentAnalysis. Most of the respondents (82.5%) weremales, between 40 to 45 years, 85% were married and 87.5% had a diploma as their educational qualification. Furthermore, 54% of the households size between 4 to 6 persons, whereas 75% were Christians. The majority of the extension officers lived in their job area (82.5), while 80% covered at least 3 communities and 3 farmer groups. In terms of number of farmers covered, only 40% of the extension officers covered more than 500 farmers and 45% travelled more than 40 km to reach their farmers. From the job satisfaction items 9 components were extracted to show areas for job satisfaction among extension officers. These were in-service training, research policies, communicating recommended practices, financial support for self and family, quality of technical help, opportunity to advance education, management and control of operations, rewarding system and sanctions. The results have several implications for motivating extension officers for high job performance especially with large number of clients and small number of extension agents.

Identification of Problem-based learning components and their effects on graduates' competencies

This study investigated the relationship between higher education and the requirement of the world of work with an emphasis on the effect of problem-based learning (PBL) on graduates' competencies. The implementation of full PBL method is costly (Albanese & Mitchell, 1993; Berkson, 1993; Finucane, Shannon, & McGrath, 2009). However, the implementation of PBL in a less than curriculum-wide mode is more achievable in a broader context (Albanese, 2000). This means higher education institutions implement only a few PBL components in the curriculum. Or a teacher implements a few PBL components at the courses level. For this kind of implementation there is a need to identify PBL components and their effects on particular educational outputs (Hmelo-Silver, 2004; Newman, 2003). So far, however there has been little research about this topic. The main aims of this study were: (1) to identify each of PBL components which were manifested in the development of a valid and reliable PBL implementation questionnaire and (2) to determine the effect of each identified PBL component to specific graduates' competencies. The analysis was based on quantitative data collected in the survey of medicine graduates of Gadjah Mada University, Indonesia. A total of 225 graduates responded to the survey. The result of confirmatory factor analysis (CFA) showed that all individual constructs of PBL and graduates' competencies had acceptable GOFs (Goodness-of-fit). Additionally, the values of the factor loadings (standardize loading estimates), the AVEs (average variance extracted), CRs (construct reliability), and ASVs (average shared squared variance) showed the proof of convergent and discriminant validity. All values indicated valid and reliable measurements. The investigation of the effects of PBL showed that each PBL component had specific effects on graduates' competencies. Interpersonal competencies were affected by Student-centred learning (β = .137; p < .05) and Small group components (β = .078; p < .05). Problem as stimulus affected Leadership (β = .182; p < .01). Real-world problems affected Personal and organisational competencies (β = .140; p < .01) and Interpersonal competencies (β = .114; p < .05). Teacher as facilitator affected Leadership (β = 142; p < .05). Self-directed learning affected Field-related competencies (β = .080; p < .05). These results can help higher education institution and educator to have informed choice about the implementation of PBL components. With this information higher education institutions and educators could fulfil their educational goals and in the same time meet their limited resources. This study seeks to improve prior studies' research method in four major ways: (1) by indentifying PBL components based on theory and empirical data; (2) by using latent variables in the structural equation modelling instead of using a variable as a proxy of a construct; (3) by using CFA to validate the latent structure of the measurement, thus providing better evidence of validity; and (4) by using graduate survey data which is suitable for analysing PBL effects in the frame work of the relationship between higher education and the world of work.

Object Detection in Images by Components

In this paper we present a component based person detection system that is capable of detecting frontal, rear and near side views of people, and partially occluded persons in cluttered scenes. The framework that is described here for people is easily applied to other objects as well. The motivation for developing a component based approach is two fold: first, to enhance the performance of person detection systems on frontal and rear views of people and second, to develop a framework that directly addresses the problem of detecting people who are partially occluded or whose body parts blend in with the background. The data classification is handled by several support vector machine classifiers arranged in two layers. This architecture is known as Adaptive Combination of Classifiers (ACC). The system performs very well and is capable of detecting people even when all components of a person are not found. The performance of the system is significantly better than a full body person detector designed along similar lines. This suggests that the improved performance is due to the components based approach and the ACC data classification structure.

On the use of principal components in contemporany population genetics: a case study

In human Population Genetics, routine applications of principal component techniques are often required. Population biologists make widespread use of certain discrete classifications of human samples into haplotypes, the monophyletic units of phylogenetic trees constructed from several single nucleotide bimorphisms hierarchically ordered. Compositional frequencies of the haplotypes are recorded within the different samples. Principal component techniques are then required as a dimension-reducing strategy to bring the dimension of the problem to a manageable level, say two, to allow for graphical analysis. Population biologists at large are not aware of the special features of compositional data and normally make use of the crude covariance of compositional relative frequencies to construct principal components. In this short note we present our experience with using traditional linear principal components or compositional principal components based on logratios, with reference to a specific dataset

Interpretation of wind components as compositional variables

The classical statistical study of the wind speed in the atmospheric surface layer is made generally from the analysis of the three habitual components that perform the wind data, that is, the component W-E, the component S-N and the vertical component, considering these components independent. When the goal of the study of these data is the Aeolian energy, so is when wind is studied from an energetic point of view and the squares of wind components can be considered as compositional variables. To do so, each component has to be divided by the module of the corresponding vector. In this work the theoretical analysis of the components of the wind as compositional data is presented and also the conclusions that can be obtained from the point of view of the practical applications as well as those that can be derived from the application of this technique in different conditions of weather

Regression analysis of compositional data when both the dependent variable and independent variable are components

It is well known that regression analyses involving compositional data need special attention because the data are not of full rank. For a regression analysis where both the dependent and independent variable are components we propose a transformation of the components emphasizing their role as dependent and independent variables. A simple linear regression can be performed on the transformed components. The regression line can be depicted in a ternary diagram facilitating the interpretation of the analysis in terms of components. An exemple with time-budgets illustrates the method and the graphical features