Maintaining legacy data: saving Belfast Harbour (UK) tide-gauge data (1902-2010)

Tide gauge data are identified as legacy data given the radical transition between observation method and required output format associated with tide gauges over the 20th-century. Observed water level variation through tide-gauge records is regarded as the only significant basis for determining recent historical variation (decade to century) in mean sea-level and storm surge. There are limited tide gauge records that cover the 20th century, such that the Belfast (UK) Harbour tide gauge would be a strategic long-term (110 years) record, if the full paper-based records (marigrams) were digitally restructured to allow for consistent data analysis. This paper presents the methodology of extracting a consistent time series of observed water levels from the 5 different Belfast Harbour tide gauges’ positions/machine types, starting late 1901. Tide-gauge data was digitally retrieved from the original analogue (daily) records by scanning the marigrams and then extracting the sequential tidal elevations with graph-line seeking software (Ungraph™). This automation of signal extraction allowed the full Belfast series to be retrieved quickly, relative to any manual x–y digitisation of the signal. Restructuring variably lengthed tidal data sets to a consistent daily, monthly and annual file format was undertaken by project-developed software: Merge&Convert and MergeHYD allow consistent water level sampling both at 60 min (past standard) and 10 min intervals, the latter enhancing surge measurement. Belfast tide-gauge data have been rectified, validated and quality controlled (IOC 2006 standards). The result is a consistent annual-based legacy data series for Belfast Harbour that includes over 2 million tidal-level data observations.

The Firefighters' Pension Scheme (Transitional and Consequential Provisions) Regulations (Northern Ireland) 2016 (PDF 115KB)

Consultation Response Report From 24 November 2015 until 14 December 2015 the Department ran a targeted consultation in relation to the HMT requirement to introduce modifications to primary legislation as a result of the introduction of the Firefighters’ Pension Scheme (2015) from 1 April 2015.  

Report on the Iowa Braille and Sight Saving School, Vinton, Iowa for the year ended June 30, 2015

Report on the Iowa Braille and Sight Saving School, Vinton, Iowa for the year ended June 30, 2015

Audit report on the Office of Treasurer of State, Iowa ABLE (Achieving a Better Life Experience) Saving Plan Trust for the year ended June 30, 2016

Audit report on the Office of Treasurer of State, Iowa ABLE (Achieving a Better Life Experience) Saving Plan Trust for the year ended June 30, 2016

North Sea Oil and Genuine Saving in the Scottish Economy

The World Bank has published estimates of sustainability of consumption paths by adjusting saving rates to take account of the depletion of non-renewable resources. During the period of North Sea oil production Scotland has been in a fiscal union with the rest of the UK. The present paper adjusts the World Bank data to produce separate genuine saving estimates for Scotland and the rest of the UK for 1970-2009, based on a ‘derivation’ principle for oil revenues. The calculations indicate that Scotland has had a negative genuine saving rate for most of the period of exploitation of North Sea oil resources, with genuine saving being positive in the rest of the UK during this period.

Régime fiscal applicable aux prestations de pension complémentaire versées par les O.F.P. aspects internationaux

info:eu-repo/semantics/published

Les conventions de cohabitation légale peuvent-elles prévoir un devoir de secours entre cohabitants et une pension après rupture de la cohabitation ?

info:eu-repo/semantics/published

Les violences conjugales et la pension après divorce

info:eu-repo/semantics/published

Report on the Peace Officers’ Retirement, Accident and Disability System, Schedule of Employer Pension Amounts for the year ended June 30, 2016

Report on the Peace Officers’ Retirement, Accident and Disability System, Schedule of Employer Pension Amounts for the year ended June 30, 2016

PCM-based battery thermal management systems, energy saving materials and LCA strategy for automotive

This PhD work arises from the necessity to give a contribution to the energy saving field, regarding automotive applications. The aim was to produce a multidisciplinary work to show how much important is to consider different aspects of an electric car realization: from innovative materials to cutting-edge battery thermal management systems (BTMSs), also dealing with the life cycle assessment (LCA) of the battery packs (BPs). Regarding the materials, it has been chosen to focus on carbon fiber composites as their use allows realizing light products with great mechanical properties. Processes and methods to produce carbon fiber goods have been analysed with a special attention on the university solar car Emilia 4. The work proceeds dealing with the common BTMSs on the market (air-cooled, cooling plates, heat pipes) and then it deepens some of the most innovative systems such as the PCM-based BTMSs after a previous experimental campaign to characterize the PCMs. After that, a complex experimental campaign regarding the PCM-based BTMSs has been carried on, considering both uninsulated and insulated systems. About the first category the tested systems have been pure PCM-based and copper-foam-loaded-PCM-based BTMSs; the insulated tested systems have been pure PCM-based and copper-foam-loaded-PCM-based BTMSs and both of these systems equipped with a liquid cooling circuit. The choice of lighter building materials and the optimization of the BTMS are strategies which helps in reducing the energy consumption, considering both the energy required by the car to move and the BP state of health (SOH). Focusing on this last factor, a clear explanation regarding the importance of taking care about the SOH is given by the analysis of a BP production energy consumption. This is why a final dissertation about the life cycle assessment (LCA) of a BP unit has been presented in this thesis.

Caracterização e distribuição de cronotipos no sul do Brasil: diferenças de gênero e estação de nascimento

OBJETIVO: Investigar a tipologia circadiana e as diferenças de gênero em universitários do sul do Brasil. MÉTODOS: Voluntários (736) de 17 a 49 anos preencheram a versão brasileira do Questionário de Cronotipo (QC), tradução do Morningness-eveningness Questionnaire (MEQ) de Horne e Östberg. Medidas de tendência central e dispersão e curva de distribuição dos escores do QC (Kolmogorov-Smirnov) foram calculadas de acordo com gênero (teste t de Student), idade, estação de nascimento e desconforto com o horário de verão (qui-quadrado). RESULTADOS: Foram incluídos 648 indivíduos (36% homens, 64% mulheres), com perdas de 12% por questionários incorretos. A distribuição dos escores do QC evidenciou uma curva normal (amplitude = 18-77; média = 46,6; desvio-padrão = 10,8). Nesta amostra, 32% foram vespertinos, 54% intermediários e 14% matutinos. As médias do QC foram significativamente diferentes (p = 0,003): homens (44,9 ± 10,8) comparados com mulheres (47,5 ± 10,7) e 70% dos que nasceram na primavera e no verão foram vespertinos (p = 0,015), sem associação gênero-estação do ano. CONCLUSÃO: Homens e nascidos na primavera-verão evidenciaram preferência pela vespertinidade, não havendo diferença de gênero com relação à estação de nascimento. Nossos resultados estão de acordo com estudos realizados no hemisfério norte que mostraram, também, uma associação entre a estação de nascimento e o cronotipo.

NATURAL LIGHT IN PINEAPPLE (Ananas comosus L) MICROPROPAGATION

Shoot tips of Ananas comosus `Imperial were rooted in vitro under two environments (artificial and natural light) and after two months the plantlets were transferred to commercial substrate (Plantmax (R)) in a greenhouse. Plant growth and leaf anatomy were evaluated at 0, 7, 15, 30 and 60-days during acclimatization. The in vitro rooting under natural light provides better agronomic and anatomical performances of Ananas comosus plants, with the benefit of saving electric energy for artificial lumination in vegetal tissue culture laboratories.

The practice of Information Architecture of websites in Brazil

The project of Information Architecture is one of the initial stages of the project of a website, thus the detection and correction of errors in this stage are easier and time-saving than in the following stages. However, to minimize errors for the projects of information architecture, a methodology is necessary to organize the work of the professional and guarantee the final product quality. The profile of the professional who works with Information Architecture in Brazil has been analyzed (quantitative research by means of a questionnaire on-line) as well as the difficulties, techniques and methodologies found in his projects (qualitative research by means of interviews in depth with support of the approaches of the Sense-Making). One concludes that the methodologies of projects of information architecture need to develop the adoption of the approaches of Design Centered in the User and in the ways to evaluate its results.

Laboratory and mill scale evaluation of biopulping of Eucalyptus grandis Hill ex Maiden with Phanerochaete chrysosporium RP-78 under non-aseptic conditions

Biopulping of Eucalyptus grandis wood chips with Phanerochaete chrysosporium RP-78 was evaluated under non-aseptic conditions in laboratory and mill wood-yard. The ability of P. chrysosporium to compete with indigenous fungi present in fresh wood chips was notorious under controlled laboratory experiments. A subsequent step involved an industrial test performed with 10-ton of fresh wood chips inoculated and maintained at 37 +/- 38 degrees C for 39 days in a biopulping pilot plant. Biotreated wood chips were pulped in a chemithermomechanical pulping mill. Net energy consumption during refining was 745 kWh ton(-1) and 610 kWh ton(-1) of processed pulp for control and biotreated wood chips, respectively. Accordingly, 18.5% net energy saving could be achieved. Biopulps contained lower shive content and had improved strength properties compared to control pulps. Tensile index improved from 25 +/- 1 N m g(-1) to 33.6 +/- 0.5 N m g(-1) and delamination strength from 217 +/- 19 kPa to 295 +/- 30 kPa.