Prosthetic joint infections : A retrospective study on the timing of reimplantation in a two-stage exchange

Different therapeutic options for prosthetic joint infections exist, but surgery remains the key. With a two-stage exchange procedure, a success rate above 90% can be expected. Currently, there is no consensus regarding the optimal duration between explantation and the reimplantation in a two-stage procedure. The aim of this study was to retrospectively compare treatment outcomes between short-interval and long-interval two-stage exchanges. Patients having a two-stage exchange of a hip or knee prosthetic joint infection at Lausanne University Hospital (Switzerland) between 1999 and 2013 were included. The satisfaction of the patient, the function of the articulation and the eradication of infection, were compared between patients having a short (2 to 4 weeks) versus a long (4 weeks and more) interval during a two-stage procedure. Patient satisfaction was defined as good if the patient did not have pain and bad if the patient had pain. Functional outcome was defined good if the patient had a prosthesis in place and could walk, medium if the prosthesis was in place but the patient could not walk, and bad if the prosthesis was no longer in place. Infection outcome was considered good if there had been no re-infection and bad if there had been a re-infection of the prosthesis 145 patients (100 hips, 45 knees) were identified with a median age of 68 years (range 19-103). The median hospital stay was 58 days (range 10-402). The median follow-up was 12.9 months (range 0.5-152). 28 % and 72 % of the patients had a short-interval and long-interval exchange of the prosthesis, respectively. Patient satisfaction, functional outcome and infection outcome for patients having a short versus a long interval are reported in the Table. The patient satisfaction was higher when a long interval was performed whereas the functional and infection outcomes were higher when a short interval was performed. According to this study a short-interval exchange appears preferable to a long interval, especially in the view of treatment effectiveness and functional outcome.

Patient-adapted treatment for prosthetic hip joint infection.

Hip joint replacement is 1 of the most successful surgical procedures of the last century and the number of replacements implanted is steadily growing. An infected hip arthroplasty is a disaster, it leads to patient suffering, surgeon's frustration and significant costs to the health system. The treatment of an infected hip replacement is challenging, healing rates can be low, functional results poor with decreased patient satisfaction. However, if a patient-adapted treatment of infected hip joints is used a success rate of above 90% can be obtained.Patient-adapted treatment is based on 5 important concepts: teamwork; understanding the biofilm; diagnostic accuracy; correct definition and classification of PJI; and patient-tailored treatment.This review presents a patient-adapted treatment strategy to prosthetic hip infection. It incorporates the best aspects of the single and staged surgical strategies and promotes the short interval philosophy for the 2-stage approach.

A Sparse Bayesian Approach for Joint Feature Selection and Classifier Learning

Peer-reviewed

Novel Robot Solutions for Carrying out Field Joint Welding and Machining in the Assembly of the Vacuum Vessel of ITER

It is necessary to use highly specialized robots in ITER (International Thermonuclear Experimental Reactor) both in the manufacturing and maintenance of the reactor due to a demanding environment. The sectors of the ITER vacuum vessel (VV) require more stringent tolerances than normally expected for the size of the structure involved. VV consists of nine sectors that are to be welded together. The vacuum vessel has a toroidal chamber structure. The task of the designed robot is to carry the welding apparatus along a path with a stringent tolerance during the assembly operation. In addition to the initial vacuum vessel assembly, after a limited running period, sectors need to be replaced for repair. Mechanisms with closed-loop kinematic chains are used in the design of robots in this work. One version is a purely parallel manipulator and another is a hybrid manipulator where the parallel and serial structures are combined. Traditional industrial robots that generally have the links actuated in series are inherently not very rigid and have poor dynamic performance in high speed and high dynamic loading conditions. Compared with open chain manipulators, parallel manipulators have high stiffness, high accuracy and a high force/torque capacity in a reduced workspace. Parallel manipulators have a mechanical architecture where all of the links are connected to the base and to the end-effector of the robot. The purpose of this thesis is to develop special parallel robots for the assembly, machining and repairing of the VV of the ITER. The process of the assembly and machining of the vacuum vessel needs a special robot. By studying the structure of the vacuum vessel, two novel parallel robots were designed and built; they have six and ten degrees of freedom driven by hydraulic cylinders and electrical servo motors. Kinematic models for the proposed robots were defined and two prototypes built. Experiments for machine cutting and laser welding with the 6-DOF robot were carried out. It was demonstrated that the parallel robots are capable of holding all necessary machining tools and welding end-effectors in all positions accurately and stably inside the vacuum vessel sector. The kinematic models appeared to be complex especially in the case of the 10-DOF robot because of its redundant structure. Multibody dynamics simulations were carried out, ensuring sufficient stiffness during the robot motion. The entire design and testing processes of the robots appeared to be complex tasks due to the high specialization of the manufacturing technology needed in the ITER reactor, while the results demonstrate the applicability of the proposed solutions quite well. The results offer not only devices but also a methodology for the assembly and repair of ITER by means of parallel robots.

The Methods of Possible Joint Treatment of Manure and Sewage Sludge in the Leningrad Region

The nutrient load to the Gulf of Finland has started to increase as a result of the strong economic recovery in agriculture and livestock farming in the Leningrad region. Also sludge produced from municipal wastewater treatment plant of the Leningrad region causes the great impact on the environment, but still the main options for its treatment is disposal on the sludge beds or Landfills. The aim of this study was to evaluate the implementation of possible joint treatment methods of manure form livestock and poultry enterprises and sewage sludge produced from municipal wastewater treatment plants in the Leningrad region. The study is based on published data. The most attention was put on the anaerobic digestion and incineration methods. The manure and sewage sludge generation for the whole Leningrad region and energy potential produced from their treatment were estimated. The calculations showed that total amount of sewage sludge generation is 1 348 000 t/a calculated on wet matter and manure generation is 3 445 000 t/a calculated on wet matter. The potential heat release from anaerobic digestion process and incineration process is 4 880 000 GJ/a and 5 950 000 GJ/a, respectively. Furthermore, the work gives the overview of the general Russian and Finnish legislation concerning manure and sewage sludge treatment. In the Gatchina district it was chosen the WWTP and livestock and poultry enterprises for evaluation of the centralized treatment plant implementation based on anaerobic digestion and incineration methods. The electricity and heat power of plant based on biogas combustion process is 4.3 MW and 7.8 MW, respectively. The electricity and heat power of plant based on manure and sewage sludge incineration process is 3.0 MW and 6.1 MW, respectively.

Developing co-operation of business units – exploring synergies and a joint business model

The purpose of this study was to develop co-operation between business units of the company operating in graphic industry. The development was done by searching synergy opportunities between these business units. The final aim was to form a business model, which is based on co-operation of these business units.The literature review of this thesis examines synergies and especially the process concerning the search and implementation of synergies. Also the concept of business model and its components are examined. The research was done by using qualitative research method. The main data acquiring method to the empirical part was theme interviews. The data was analyzed using thematisation and content analysis.The results of the study include seven identified possible synergies and a business model, which is based on the co-operation of the business units. The synergy opportunities are evaluated and the implementation order of the synergies is suggested. The presented synergies create the base for the proposed business model.

Viipurinlahden taistelu 1944 joint-operaation näkökulmasta tarkasteltuna

Viipurinlahden taistelun kesällä 1944 on monesti esitetty olevan ensimmäinen suomalainen joint- eli yhteisoperaatio. Työ käsittelee Viipurinlahden taistelua nykyaikaisen jointoperaation periaatteiden näkökulmasta. Viipurinlahden taistelussa toimi kaikkien kolmen puolustushaaran joukkoja pienellä taistelualueella. Joint-käsitettä tarkastellaan yhdysvaltalaisten ohjesääntöjen ja suomalaisten näkemysten kautta. Yhdysvallat on yksi maailman johtavin joint-doktriinin käyttäjä. Tämän vuoksi joint-käsitettä tarkastellaan työssä pääasiassa Yhdysvaltojen ohjesääntöjen ja niihin perustuvan tiedon kautta.

Mudanças na vascularização arterial da curvatura menor do estômago após gastrectomia segmentar associada à vagotomia gástrica proximal em cães

Para avaliar os efeitos da gastrectomia segmentar do corpo associada à vagotomia gástrica proximal (GS + VGP), sobre a vascularização arterial da curvatura menor do estômago, foram utilizados 24 cães distribuídos em dois grupos de 12 animais, com as seguintes denominações: Grupo I, animais submetidos à laparotomia e manipulação gástrica; Grupo II, animais submetidos à GS + VGP. Em cada grupo, metade dos animais foi sacrificada no terceiro, metade no oitavo dia pós- operatório. No dia do sacrifício, procedeu-se à injeção de mistura de bário-gelatina, na vascularização arterial do estômago. A seguir, o estômago foi removido do animal, fixado em solução de formol, aberto pela curvatura maior e radiografado com técnica padronizada. A intensidade da vascularização da curvatura menor do estômago foi determinada por microdensitometria e morfometria. Pela microdensitometria, foram determinados os valores de densidade óptica, convertidos em equivalentes de milímetros de alumínio, da imagem radiográfica da curvatura menor do estômago. Com base nesses resultados, verificou-se que os valores médios de densidade óptica do grupo II foram significativamente maiores do que o grupo I (p<0,001). Pelo estudo morfométrico de fragmento histológico da curvatura menor, observou-se que os valores médios de volume relativo das arteríolas, em relação ao volume total da camada submucosa, foram significativamente maiores no grupo II em comparação ao grupo I (p<0,001). Os valores médios dos diâmetros das arteríolas da camada submucosa foram significativamente mais elevados no grupo II que no grupo I (p<0,001). O número de arteríolas por mm2 da camada submucosa não diferiu significativamente entre os dois grupos (p>0,05). Embora a execução da GS + VGP implique desvascularização da curvatura menor do estômago, observou-se aumento da intensidade da vascularização arterial desta curvatura nos animais do grupo II, conseqüente à dilatação das arteríolas da camada submucosa.

Evolução das varizes esofagogástricas após anastomose esplenorrenal proximal versus esplenorrenal distal

Avaliou-se, retrospectivamente, a evolução pós-operatória das varizes esofagogástricas em 40 pacientes submetidos a um dos seguintes procedimentos cirúrgicos: a (n=27) derivação esplenorrenal distal (ERD) e B (n=13) derivação esplenorrenal proximal (ERP). Todos os pacientes tinham hipertensão porta esquistossomótica com diagnóstico prévio de varizes do esôfago, presentes ou não no estômago, com um ou mais episódios de sangramento. Os pacientes foram submetidos a um dos procedimentos cirúrgicos de acordo com a preferência do cirurgião assistente. Foram realizadas, nesses pacientes, endoscopias no período pré-operatório e aos seis, 12 e 18 meses no pós-operatório. Os dados de cada endoscopia foram coletados e comparados entre os grupos, verificando-se a presença de varizes do esôfago e estômago nos diferentes períodos, comparando esses achados através do teste do qui-quadrado, com significância para p<0,05. Os resultados obtidos não mostraram casos de ressangramento até o 18º mês pós-operatório, nem casos de encefalopatia. Foram diagnosticadas varizes esofágicas, no pré-operatório, em 100% dos pacientes nos dois grupos. No período pós-operatório, houve redução significativa das varizes do esôfago, quando estudados os dois grupos conjuntamente, para 40% no sexto mês (p = 0,0002), 30% no 12º mês (p = 0,003) e 27,5% no 18º mês (p = 0,003). No sexto mês pós-operatório, a incidência de varizes do esôfago foi maior nos pacientes com ERD quando comparados àqueles com ERP (51,9% vs. 15,4%, p = 0,03). Quando estudadas as varizes aos 12 e 18 meses não foi observada diferença significativa entre pacientes submetidos a ERD ou ERP (12º mês, 37% vs. 15,4%; 18º mês, 25,9% vs. 30,8%). Foram vistas varizes gástricas em 37,5% dos pacientes, com redução significativa no sexto mês (2,5%, p = 0,005). Entretanto, quando comparada com a freqüência do sexto mês, houve aumento significativo no 12º mês (5%, p = 0,00001) e 18º mês (7,5%, p = 0,02). Quando comparados os grupos, no período pré-operatório, estas varizes estiveram presentes mais freqüentemente no grupo submetido a ERP (69,2% vs. 26%, p = 0,0005), sem diferença significativa no período pós-operatório (6º mês, 16,6% vs. 0%; 12º mês, 33,3% vs. 0%; 18º mês, 33,3% vs. 11,1%). Este trabalho demonstrou que os dois tipos de cirurgia têm resultado semelhante em relação à resolução das varizes do esôfago e estômago no 18º mês, mas os resultados indicam que a redução na incidência das varizes do esôfago se acompanha de aumento das varizes gástricas, provavelmente devido à abertura de novas vias colaterais de drenagem em casos de persistência de uma pressão porta aumentada ou mau funcionamento da derivação esplenorrenal.

Avaliação do efeito da colostomia proximal na cicatrização de anastomoses colocólicas em ratos com obstrução intestinal

OBJETIVO: Avaliar o efeito da colostomia proximal na cicatrização de anastomoses colocólicas em ratos com obstrução intestinal. MÉTODO: 72 ratos foram divididos em três grupos: grupo controle (C), submetido à anastomose colocólica e à colostomia proximal na ausência de oclusão intestinal; grupo sem colostomia (SC), submetido à oclusão intestinal de 72 horas e à anastomose colocólica primária; grupo com colostomia (CC) submetido à oclusão intestinal de 72 horas, à anastomose colocólica primária e à colostomia proximal. A cicatrização anastomótica foi avaliada em dois períodos, nos 2º e 7º dias de pós-operatório, em relação à deiscência anastomótica, aderências, epitelização mucosa, pressão de ruptura e a variáveis histológicas por estudo convencional e informatizado. RESULTADOS: verificou-se maior tendência a deiscência anastomótica no grupo SC (12,5%), e elevada incidência de complicações da colostomia no grupo CC (13%), entretanto tais resultados não apresentaram diferença estatística significante. No que se refere às demais variáveis analisadas para verificação da cicatrização anastomótica deve-se considerar que houve equivalência entre os três grupos nos dois períodos analisados. CONCLUSÃO: Não há diferença entre a cicatrização de anastomoses colocólicas associadas ou não à colostomia proximal, em ratos com obstrução intestinal.

Tratamento de hemorragia intestinal grave decorrente de hipertensão porta, por meio de esplenectomia subtotal e anastomose esplenorrenal proximal

OBJETIVO: Um dos maiores desafios no tratamento da hipertensão porta é o sangramento de varizes intestinais. O objetivo deste artigo é apresentar um novo tratamento para hemorragia entérica grave provocada por hipertensão porta cirrótica, utilizando a esplenectomia subtotal combinada com derivação esplenorrenal proximal. TÉCNICA: Uma paciente de 64 anos apresentou sangramento intenso proveniente de varizes em alça jejunal em Y de Roux, para derivação biliodigestiva, após lesão coledociana, complicada com cirrose hepática. O procedimento consistiu em esplenectomia subtotal, preservando o pólo superior do baço, suprido apenas pelos vasos esplenogástricos, e anastomose término-lateral da veia esplênica, em sua extremidade proximal, à veia renal esquerda. RESULTADOS: Esse procedimento foi seguro, sem sangramento maior, dificuldade técnica ou complicação. No acompanhamento de 30 meses, a paciente não teve novos episódios de sangramento, a cirrose não avançou e, atualmente, encontra-se bem, sob controle. CONCLUSÃO: A esplenectomia subtotal combinada com derivação esplenorrenal proximal é uma boa alternativa operatória para tratar hemorragia proveniente de varizes intestinais, decorrentes de hipertensão porta.

IT Investment Portfolio Management Over Joint Ventures: Case Study in a Multinational Oil & Gas Company

With information technology (IT) playing an increasing important role in driving the business, the value of IT investment is often challenged because not all of those investment decisions are made in a reasonable way or aligned with business strategies. IT investment portfolio management (PfM) is an effective way to prioritize and select the right IT projects to invest in, by taking all the project proposals into consideration as a whole, based on their business value, risks, costs, and interrelationships. There are different decision models to prioritise projects, and the Analytic Hierarchy Process (AHP) is one of the most commonly-used methods and is discussed in this master thesis. At the same time, there are IT projects on different levels for a multinational company, from global to local. For instance, many of them are probably proposed by joint ventures on local level. In the oil & gas industry, joint ventures are often formed especially in the area of the upstream (exploration & production). How to involve those projects into the IT investment PfM approach of the parent company is a challenge, because the parent company cannot make the decisions on its own. It needs to prioritize all projects in an adequate way, communicate with JVs and influence them. Also, different control levels on JVs need to be considered. This paper hence attempts to introduce a tailored approach of IT investment PfM for a multinational oil & gas company to address the issues around JVs.