Land cover mapping analysis and urban growth modeling using remote sensing techniques

The rapid growth of big cities has been noticed since 1950s when the majority of world population turned to live in urban areas rather than villages, seeking better job opportunities and higher quality of services and lifestyle circumstances. This demographic transition from rural to urban is expected to have a continuous increase. Governments, especially in less developed countries, are going to face more challenges in different sectors, raising the essence of understanding the spatial pattern of the growth for an effective urban planning. The study aimed to detect, analyse and model the urban growth in Greater Cairo Region (GCR) as one of the fast growing mega cities in the world using remote sensing data. Knowing the current and estimated urbanization situation in GCR will help decision makers in Egypt to adjust their plans and develop new ones. These plans should focus on resources reallocation to overcome the problems arising in the future and to achieve a sustainable development of urban areas, especially after the high percentage of illegal settlements which took place in the last decades. The study focused on a period of 30 years; from 1984 to 2014, and the major transitions to urban were modelled to predict the future scenarios in 2025. Three satellite images of different time stamps (1984, 2003 and 2014) were classified using Support Vector Machines (SVM) classifier, then the land cover changes were detected by applying a high level mapping technique. Later the results were analyzed for higher accurate estimations of the urban growth in the future in 2025 using Land Change Modeler (LCM) embedded in IDRISI software. Moreover, the spatial and temporal urban growth patterns were analyzed using statistical metrics developed in FRAGSTATS software. The study resulted in an overall classification accuracy of 96%, 97.3% and 96.3% for 1984, 2003 and 2014’s map, respectively. Between 1984 and 2003, 19 179 hectares of vegetation and 21 417 hectares of desert changed to urban, while from 2003 to 2014, the transitions to urban from both land cover classes were found to be 16 486 and 31 045 hectares, respectively. The model results indicated that 14% of the vegetation and 4% of the desert in 2014 will turn into urban in 2025, representing 16 512 and 24 687 hectares, respectively.

Analysis of temporal and spatial variations of forest. A case of study in notheastern Armenia

The forest has a crucial ecological role and the continuous forest loss can cause colossal effects on the environment. As Armenia is one of the low forest covered countries in the world, this problem is more critical. Continuous forest disturbances mainly caused by illegal logging started from the early 1990s had a huge damage on the forest ecosystem by decreasing the forest productivity and making more areas vulnerable to erosion. Another aspect of the Armenian forest is the lack of continuous monitoring and absence of accurate estimation of the level of cuts in some years. In order to have insight about the forest and the disturbances in the long period of time we used Landsat TM/ETM + images. Google Earth Engine JavaScript API was used, which is an online tool enabling the access and analysis of a great amount of satellite imagery. To overcome the data availability problem caused by the gap in the Landsat series in 1988- 1998, extensive cloud cover in the study area and the missing scan lines, we used pixel based compositing for the temporal window of leaf on vegetation (June-late September). Subsequently, pixel based linear regression analyses were performed. Vegetation indices derived from the 10 biannual composites for the years 1984-2014 were used for trend analysis. In order to derive the disturbances only in forests, forest cover layer was aggregated and the original composites were masked. It has been found, that around 23% of forests were disturbed during the study period.

Analyzing Geospatial patterns of syrian refugee flows in southeastern Turkey by use of remote sensing and complementary data

Crisis-affected communities and global organizations for international aid are becoming increasingly digital as consequence geotechnology popularity. Humanitarian sector changed in profound ways by adopting new technical approach to obtain information from area with difficult geographical or political access. Since 2011, turkey is hosting a growing number of Syrian refugees along southeastern region. Turkish policy of hosting them in camps and the difficulty created by governors to international aid group expeditions to get information, made such international organizations to investigate and adopt other approach in order to obtain information needed. They intensified its remote sensing approach. However, the majority of studies used very high-resolution satellite imagery (VHRSI). The study area is extensive and the temporal resolution of VHRSI is low, besides it is infeasible only using these sensors as unique approach for the whole area. The focus of this research, aims to investigate the potentialities of mid-resolution imagery (here only Landsat) to obtain information from region in crisis (here, southeastern Turkey) through a new web-based platform called Google Earth Engine (GEE). Hereby it is also intended to verify GEE currently reliability once the Application Programming Interface (API) is still in beta version. The finds here shows that the basic functions are trustworthy. Results pointed out that Landsat can recognize change in the spectral resolution clearly only for the first settlement. The ongoing modifications vary for each case. Overall, Landsat demonstrated high limitations, but need more investigations and may be used, with restriction, as a support of VHRSI.

A formação em rastreio e intervenções breves do álcool muda as atitudes dos profissionais de saúde ocupacional? : estudo quasi experimental exploratório para uma estratégia para o meio laboral

RESUMO - Estudos anteriores nos Cuidados de Saúde Primários (CSP) apontam para um incremento da Deteção Precoce (DP) e Intervenções Breves (IB) em pacientes com Problemas Ligados ao Álcool (PLA) após formação apropriada dos profissionais de saúde (com melhoria das suas atitudes). Este estudo quasi experimental, exploratório, é pioneiro no âmbito da Saúde Ocupacional (SO) para a implementação de Rastreio/DP e IB nos PLA. O objetivo principal foi avaliar se uma formação sobre Rastreio/DP e IB pode melhorar as atitudes dos profissionais de SO ao lidar com os PLA em Meio Laboral (PLAML). Foi aplicado um questionário em duas partes: Q1/pré-formação (variáveis sociodemográficas, profissionais, competências em alcoologia, experiência pessoal com álcool/familiares com PLA, dificuldades em lidar com trabalhadores com PLA, AUDIT-C e SAAPPQ) e Q2/pós-formação (avaliação da formação e das atitudes SAAPPQ - Adequação, Legitimidade, Motivação, Autoestima e Satisfação). Os resultados na amostra (N=39) revelaram um aumento sobretudo na Adequação e Satisfação. No entanto, naqueles com níveis baixos das atitudes pré-formação constou-se melhoria das atitudes à excepção da Autoestima e foram encontradas algumas associações com as características do perfil inicial dos participantes. Sugerem-se estudos posteriores para identificação de pacotes formativos mais efetivos e propostas para um Plano integrador de RIB para PLAML

Produtos têxteis inteligentes incorporando filamentos compósitos com nanotubos de carbono

Programa Doutoral em Engenharia Têxtil.

Assessment of polymer-based nanocomposites biodegradability

The management of solid waste is a growing concern in many countries. Municipal solid waste is a major component of the total solid waste generated by society, and the composting of municipal solid waste has gained some attention even though a composting treatment for it is not yet widespread. It may not be realistic to replace large portions of these plastics with biodegradable materials, and it may be more important to separate plastics unsuitable for the composting process at the generating spots. However, for food packaging, there is still a great deal of interest in using biodegradable plastics that are difficult to sort at the generation spots. Under these circumstances, nanocomposites of biodegradable polymers as matrix and nanoparticles, that can be degraded along with organic wastes during composting could be a solution. Therefore, this chapter aims to give an overview on the biodegradability studies of bio-nanocomposites. It will focus on different polymers, nanocomposites containing different clay types and inorganic particles exposed under different environments.

Thermal characterization of polyhydroxyalkanoates and poly(lactic acid) blends obtained by injection molding

In this work we present the thermal characterization of the full scope of polyhydroxyalcanoate and poly(lactic acid) blends obtain by injection molding. Blends of polyhydroxyalcanoate and poly(lactic acid) (PHA/PLA) were prepared in different compositions ranging from 0–100% in steps of 10%. The blends were injection molded and then characterized by differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). The increment of PHA fraction increased the degree of crystallinity of the blend and the miscibility of the base polymers as verified by the Fox model. The WAXD analysis indicates that the presence of PHA hindered the PLA crystallization. The crystallization evolution trough PHA weight fraction (wf) shows a phase inversion around 50-60%. SEM analyses confirmed that the miscibility of PHA/PLA blends increased with the incorporation of PHA and became total for values of PHA higher that 50%.

Produção de bioplásticos a partir de agro-resíduos

Dissertação de mestrado integrado em Engenharia de Materiais

Development of high specific strength components, with internal cellular structure, for several applications

Dissertação de mestrado em Engenharia Mecânica

Impressão FDM de pares de materiais funcionais

Dissertação de mestrado integrado em Engenharia de Materiais

Poly lactic acid based biodegradable stents and functionalization techniques: brief review

Commercial stents, especially metallic ones, present several disadvantages, and this gives rise to the necessity of producing or coating stents with different materials, like natural polymers, in order to improve their biocompatibility and minimize the disadvantages of metallic ones. This review paper discusses some applications of natural-based polymers in stents, namely polylactic acid (PLA) for stent development and chitosan for biocompatible coatings of stents . Furthermore, some effective stent functionalization techniques will be discussed, namely Layer by Layer (LBL) technique.

Degradação fotocatalítica de petróleo e seus derivados através da utilização de nanopartículas de dióxido de titânio puro e misturado com óxido de grafeno reduzido

Dissertação de mestrado integrado em Engenharia de Materiais

Layer-by-layer technique to developing functional nanolaminate films with antifungal activity

The layer-by-layer (LbL) deposition method was used to build up alternating layers (five) of different polyelectrolyte solutions (alginate, zein-carvacrol nanocapsules, chitosan and chitosan-carvacrol emulsions) on an aminolysed/charged polyethylene terephthalate (A/C PET) film. These nanolaminated films were characterised by contact angle measurements and through the determination of water vapour (WVTR) and oxygen (O2TR) transmission rates. The effect of active nanolaminated films against the Alternaria sp. and Rhizopus stolonifer was also evaluated. This procedure allowed developing optically transparent nanolaminated films with tuneable water vapour and gas properties and antifungal activity. The water and oxygen transmission rate values for the multilayer films were lower than those previously reported for the neat alginate or chitosan films. The presence of carvacrol and zein nanocapsules significantly decreased the water transmission rate (up to 40 %) of the nanolaminated films. However, the O2TR behaved differently and was only improved (up to 45 %) when carvacrol was encapsulated, i.e. nanolaminated films prepared by alternating alginate with nanocapsules of zein-carvacrol layers showed better oxygen barrier properties than those prepared as an emulsion of chitosan and carvacrol. These films containing zein-carvacrol nanocapsules also showed the highest antifungal activity (30 %), which did not significantly differ from those obtained with the highest amount of carvacrol, probably due to the controlled release of the active agent (carvacrol) from the zein-carvacrol nanocapsules. Thus, this work shows that nanolaminated films prepared with alternating layers of alginate and zein-carvacrol nanocapsules can be considered to improve the shelf-life of foodstuffs.

Influência da suplementação de creatina na capacidade funcional de pacientes com Insuficiência Cardíaca

FUNDAMENTO: A Insuficiência Cardíaca (IC) é uma síndrome complexa, marcada pela intolerância ao esforço e perda da capacidade funcional. OBJETIVO: Avaliar a capacidade funcional dos pacientes com IC suplementados com creatina. MÉTODOS: Estudo prospectivo, randomizado, duplo cego. Foram randomizados em dois grupos 33 pacientes com IC, com idade > 18 anos, sexo masculino, classes funcionais II a IV. O grupo experimental (G CRE, n = 17) foi suplementado com creatina com dose de 5 g por dia durante seis meses. E o grupo placebo (G PLA, n = 16) recebeu 5 g de maltodextrina por dia durante o mesmo período de tempo. Ambos os grupos foram submetidos a avaliação da capacidade funcional por meio da ergoespirometria e teste de caminhada de seis minutos (TC6) pré e pós-intervenção. O modelo estatístico Ancova e a correlação de Pearson foram utilizados na análise dos grupos e nas formas de tratamento. RESULTADOS: Das variáveis avaliadas na ergoespirometria, o volume de oxigênio pico (VO2 pico), limiar anaeróbio (LA) e o pulso de oxigênio (pulso de O2) não apresentaram diferenças significativas entre os grupos (P>0,05). No TC6 não houve diferença significativa na distância percorrida. CONCLUSÃO: A suplementação de creatina em pacientes com IC não promoveu melhora significativa na capacidade funcional.

Skull morphometrics of adult male Antartic fur seal, Arctocephalus gazella, and South American fur seal A. australis

The skull morphometrics of adult male Antarctic fur seal, Arctocephalus gazella (Peters, 1875) and South American fur seal, A. australis (Zimmermann, 1783) were investigated using a collection of 45 and 38 skulls, respectively. Eighteen measurements were taken for each specimen. Comparative univariate and multivariate statistical analyses included standard statistics, one-way analysis of variance, principal component analysis and discriminant analysis. Individual variation was relatively high for some variables, as expressed by the coefficient of variation. Skulls of A. gazella were larger than those of A. australis for all but two variables: squamosal jugal suture and rostral length. Both species differed significantly as shown by both univariate and multivariate analyses. The discriminant function correctly classified all specimens. The standardized canonical coefficients showed that the variables which most contribute to the differentiation between species were, in decreasing order, the rostral length, palatal length, palatal width at postcanine 5 and braincase width. The present study corroborates that A. gazella and A. australis are phenotipically distinct species.