Ligandless cloud point extraction of trace amounts of palladium and rhodium in road dust samples using Span 80 prior to their determination by flame atomic absorption spectrometry

In this study, a procedure is developed for cloud point extraction of Pd(II) and Rh(III) ions in aqueous solution using Span 80 (non-ionic surfactant) prior to their determination by flame atomic absorption spectroscopy. This method is based on the extraction of Pd(II) and Rh(III) ions at a pH of 10 using Span 80 with no chelating agent. We investigated the effect of various parameters on the recovery of the analyte ions, including pH, equilibration temperature and time, concentration of Span 80, and ionic strength. Under the best experimental conditions, the limits of detection based on 3Sb for Pd(II) and Rh(III) ions were 1.3 and 1.2 ng mL-1, respectively. Seven replicate determinations of a mixture of 0.5 µg mL-1 palladium and rhodium ions gave a mean absorbance of 0.058 and 0.053 with relative standard deviations of 1.8 and 1.6%, respectively. The developed method was successfully applied to the extraction and determination of the palladium and rhodium ions in road dust and standard samples and satisfactory results were obtained.

Controle químico da queima de folhas e da mela de estacas de eucalipto, causadas por Rhizoctonia spp.

Visando ao controle químico da queima de folhas e mela de estacas de eucalipto (Eucalyptus spp.) em viveiros florestais, avaliou-se a eficiência de 12 fungicidas em inibir in vitro o crescimento micelial de um isolado epifítico de Rhizoctonia solani AG1-IB (RH-2). Sete fungicidas que inibiram totalmente o crescimento micelial do fungo, a concentrações inferiores a 100 ppm, foram pré-selecionados: methyl-tolclophos, benomyl, pencycuron, iprodione, thiabendazol, thiram e captan. Avaliou-se, ainda, a sensibilidade (EC50 = dose provável que inibe o crescimento micelial em 50%) aos fungicidas methyl-tolclophos, benomyl, iprodione e pencycuron de mais oito isolados patogênicos ao eucalipto, que diferem entre si quanto a virulência, morfologia, grupo de anastomose, número de núcleos por célula vegetativa e padrões eletroforéticos de proteínas e isoenzimas. Embora variações nos valores de EC50 entre algumas combinações de fungicidas e isolados tenham ocorrido, todos os isolados foram sensíveis aos quatro fungicidas testados (EC50 < 11 ppm). Sob condições controladas, pulverizações com iprodione (1,5 g/l), benomyl (1 g/l), methyl-tolclophos (1,5 g/l), thiram ( 2,1 g/l), captan (2 g/l) e pencycuron (2 g/l) reduziram significativamente (alfa=5%) a incidência de folhas lesionadas por R. solani AG1, em brotações de mudas envasadas. Associadas à poda de limpeza, pulverizações de brotações de eucalipto em jardim clonal (no campo) com iprodione (1 g/l) ou com mistura de benomyl (0,5 g/l) + captan (1 g/l), alternada com mistura de benomyl (0,5 g/l) + thiram (1 g/l), reduziram a incidência da mela de estacas na casa de vegetação (alfa=5%).

A novel postharvest rot of okra pods caused by Rhizoctonia solani in Brazil

Okra pods with unusual brown lesions and rot were collected in a local supermarket in Brasília DF. The objective of this paper was to characterize the causal agent, to fulfill Koch's postulates and to determine some conditions conducive to disease. The pathogen was identified as Rhizoctonia solani based on morphological characteristics which fitted the fungus description, such as pale to brown hyphae, with nearly right-angled side branches constricted at the base, hyphal cells 6-10 µm wide with a septum near the base. Five isolates were obtained from infected pods and identified as AG 1-IB anastomosis group. Wounded or unwounded okra pods cv. Santa Cruz 47 were inoculated with mycelium disks of R. solani and kept in humid chambers at 12 ºC or 25 ºC. After seven days at 25 ºC, both wounded and unwounded pods were completely rotted and brown, while those kept at 12 ºC showed small lesions ranging from 0.6 to 1.0 mm only in wounded pods. The pathogen was able to grow in different materials used for assembling crates and packs of horticultural products, such as pinewood, corrugated carton, plastic, Styrofoam and newspaper sheets when kept in humid chambers (24 ºC, 96 % RH). The disease occurrence can be related to careless handling practices and to the transmission of R. solani propagules by infected plant debris or soil particles. This is the first report of Rhizoctonia solani causing postharvest rot in okra pods in Brazil.

Microeletrodos: I. Construção e caracterização

Estudou-se e discutiu-se os diferentes métodos de preparação de microfios de Pt pura, Pt-Ir (20%, m/m) e Pt-Rh (10%, m/m) a serem empregados na construção dos respectivos microeletrodos. Os fios de Pt e suas ligas foram obtidos empregando fieiras com diferentes diâmetros. Em seguida foi utilizado o procedimento de desgaste eletroquímico em sal fundido (mistura NaNO3/ NaCl 14: a 320oC) para a Pt e em solução 6 molL-1 NaCN + 2 mol L-1 NaOH para a liga de Pt-Ir. Para a caracterização da interface metal-vidro e determinação dos raios geométrico e efetivo foram empregadas as microscopias óptica e eletrônica de varredura, a voltametria cíclica e a cronoamperometria. A condição de selagem foi verificada através dos gráficos da capacitância aparente Cd, corrigida considerando-se a área dos microeletrodos, e a velocidade de varredura, v.

Microeletrodos: II. Caracterização eletroquímica

Estudou-se o comportamento eletroquímico de microeletrodos de Pt e de suas ligas (Pt-Rh (10%, m/m; Pt-Ir(20%, m/m)), com geometria em forma de disco, explorando diferentes dimesões para os microeletrodos: r e = 30 a 150 mm. Os estudos foram realizados em solução aquosa de KCl 1 mol L-1 contendo [K4Fe(CN)6] 6,00 x 10-3 mol L-1. Foram aplicadas diferentes equações descritas na literatura para a condição de estado estacionário e quase-estacionário. A condição de estado estacionário não foi obtida para nenhum dos eletrodos estudados. A curva média, comumente empregada como representativa da corrente de estado estacionário, somente representou tal condição até a meia-altura das curvas I/E, e ainda para valores de r e 70 mm. O aumento do r e evidenciou uma transição de comportamento de micro para semi-micro eletrodo. Apesar disso, as equações que permitem avaliar a contribuição da corrente difusional e radial para a corrente total do voltamograma aplicaram-se perfeitamente em todo o intervalo de raios utilizado neste trabalho.

Uso da análise exploratória de dados na avaliação de modificadores químicos para determinação direta e simultânea de metais em álcool combustível por GFAAS

O objetivo deste trabalho foi empregar a análise exploratória de dados, no caso, a técnica de análise de componentes principais (PCA) como ferramenta na avaliação de modificadores químicos na determinação direta e simultânea de Al, As, Cu, Fe, Mn e Ni em álcool etílico combustível por espectrometria de absorção atômica em forno de grafite (GFAAS). Os modificadores químicos avaliados foram: Pd(NO3)2 + Mg(NO3)2; W/Rh; W+ co-injeção de Pd(NO3)2 + Mg(NO3)2 e para cada modificador foram utilizadas trintas amostras de álcool etílico combustível. Como dados experimentais foram utilizados os resultados dos testes de adição e recuperação dos analitos frente aos diferentes modificadores químicos estudados. O emprego da técnica de PCA possibilitou a separação dos tipos de modificadores em função do intervalo de recuperação do analito. Dentre os modificadores avaliados, W+ co-injeção de Pd(NO3)2 + Mg(NO3)2 apresentou-se como a espécie de maior correlação positiva, pois apresenta os maiores teores de recuperação, e sendo assim, foi o escolhido para o desenvolvimento de metodologia para determinação direta e simultânea de Al, As, Cu, Fe, Mn e Ni em álcool etílico combustível por GFAAS.

Prochloraz residue levels in ginger submitted to Sportak 450 CE" postharvest treatment

A preliminary study was conducted to determine the residue levels of prochloraz in ginger samples treated with Sportak 450 CE® (prochloraz as active ingredient) under laboratory conditions and cold-storage for 15 days at 10&deg;C and 89% RH. Sampling was carried out at 10 and 15 days after Sportak 450 CE® dip treatment (450 and 900 µg mL-1). Pesticide residues were determined by GCECD. During the study, residue levels in ginger ranged between 3.6 and 10.6 mg Kg-1 for prochloraz.

Catalytic transformations of fatty acid derivatives for food, oleochemicals and fuels over carbon supported platinum group metals

Växtoljor som utgör en förnybar naturresurs används som sådana eller i modifierade former i många industriella processer, som är av stor betydelse för vårt vardagliga liv. Växtoljor används i livsmedel, i kemiska och farmaceutiska produkter, i textilindustrin, för framställning av färgämnen och beläggningsmaterial samt som miljövänliga bränslekomponenter. Fetter och oljor hör till de äldsta kemiska komponenterna som utnyttjas av människan. De består huvudsakligen av glycerolestrar och fettsyror. Fetter och oljor har typiskt en kolkedja med kol-koldubbelbindningar samt karboxyl- och estergrupper, som kan genom hydrering eller dekarboxylering konverteras till nyttiga och miljövänliga produkter med hjälp av ädelmetallkatalysatorer. Aktivt kol (C) används som bärare på katalysatorerna. Väteaddition, d.v.s. hydrering av växtoljor har varit föremål för omfattande forskning i över hundra års tid. Hydreringen är en viktig process, för den tillämpas på produktion av fetter och margarin. Omättade fettsyror hydreras traditionellt på nickelbaserade heterogena katalysatorer. Samtidigt med en partiell hydrering av fettsyrorna och fettsyraestrarna som har två dubbelbindningar pågår också isomeringsreaktioner, vilka ger cis- och transisomerer av reaktantmolekylerna. Den största nackdelen med nickelkatalysatorerna är deras giftighet samt bildning av ohälsosamma transisomerer i reaktionsprodukterna. Dessutom deaktiveras nickelkatalysatorn snabbt p.g.a. att nickeltvålar bildas i reaktionsblandningen. Platinabaserade katalysatorer lider däremot inte av dessa begränsningar. Metaller i platinagruppen i det periodiska systemet studerades i detalj för att avslöja kinetiska effekter i hydreringen av cis-metyloleat. Palladium, rutenium, rhodium, platina och iridium användes som katalytiska metaller. Metallhalten på aktivkolbärare var 1 vikt-%. De olika platinametallerna undersöktes för att kartlägga konkurrerande hydrerings- och isomeringsrutter på metallerna. Det visade sig att metallerna i andra raden av det periodiska systemet (Ru, Rh, Pd) är aktivare i isomeringsprocesserna, medan metallerna i tredje raden (Ir, Pt) har en lägre aktivitet. Pd/C valdes bland platinametallerna, för att den är attraktiv ur ekonomisk synvinkel och den är mycket aktiv och selektiv, speciellt jämfört med nickel. Tyngdpunkten i arbetet var utvecklingen av en alternativ, palladiumbaserad hydreringsteknologi som skulle ersätta den traditionella teknologin som är baserad på användningen av nickelkatalysatorer. Palladiumbaserade katalysatorer kan återcirkuleras, de är aktivare och mera resistenta mot syror och de bildar mindre mängder av skadliga transisomerer. För att denna teknologi skall bli ekonomiskt hållbar och konkurrenskraftig, måste den basera sig på de bästa möjliga katalysatorerna, vilket innebär att en optimal kombination av hög aktivitet och selektivitet samt en lång livstid för katalysatorn krävs. Därför inkluderades teknologiska aspekter kraftigt i forskningen. Mycket arbete satsades på design av palladium på en mesoporös kolbärare och undersökning av korrelationerna mellan katalysatorns egenskaper och dess aktivitet i isomeriseringsreaktionerna och i hydreringen av kol-koldubbelbindningarna i reaktantmolekylen. Katalysatorerna karakteriserades med många fysikaliska och kemiska metoder (transmissionselektronmikroskopi (TEM), röntgendiffraktion (XRD), röntgenfotoelektronspektroskopi (XPS), temperaturprogrammerad reduktion (TPR), temperaturprogrammerad desorption (TPD) av kolmonoxid, kemisorption av kolmonoxid, fysisorption av kväve). Temperaturens, vätetryckets och katalysatorkoncentrationens inverkan på fettsyra- och isomersammansättningen hos de hydrerade oljorna bestämdes under kinetiska betingelser, i frånvaro av massöverföringseffekter. Syreavspjälkning genom fullständig dekarboxylering av karboxylgruppen i fettsyramolekylen är det hittills bästa sättet att framställa miljövänlig dieselolja, eftersom linjära paraffiner fås som reaktionsprodukter och en tillsats av dyr vätgas undviks. Deoxygeneringen undersöktes systematiskt på en Pd/C-katalysator (Sibunit) genom att använda mättade fettsyror C16-C20 och C22 som råvara. Produktmolekylen blev en dieselliknande kolvätemolekyl, med en kolatom färre än i utgångsmolekylen. Lika stora dekarboxyleringshastigheter observerades för rena, mättade fettsyror. En jämförelse av deoxygenereringshastigheterna för stearin-, olein- och linolsyra som råvara vid 300oC i närvaro av 1-volymprocent väte på mesoporös Pd/C (Sibunit) avslöjade att katalysatorns aktivitet och selektivitet ökade med en ökande mättningsgrad av reaktantmolekylen. Då stearinsyra användes som utgångsmolekyl, bestod huvudprodukterna av önskade C17-kolväten, medan mängden av aromatiska C17-komponenter ökade, då olein- och linolsyra användes som utgångsmolekyler. Katalysatordeaktiveringen var relativt påfallande vid deoxygeneringen av linolsyra så att endast 3% av fettsyrorna omsattes till produkter i 330 min. Deaktiveringen orsakades av aromatiska C17-komponenter samt av fettsyradimerer, som bildades via en Diels-Alderreaktion. Hydreringen av omättade fettsyror kan därför rekommenderas som ett primärt kemiskt steg i framställningen av miljövänliga dieselprodukter. Målet var också att öka förståelsen av palladiummetallernas roll i nanoskala, speciellt effekten av metallpartiklarna i katalytisk hydrering och deoxygenering. Pd/C-katalysatorer med lika stora halter av Pd syntetiserades och metallens dispersion på bärarmaterialet varierades systematiskt genom en kontrollerad uppväxt av palladiumnanopartiklar på aktiv kolbärare. Metalldispersionens effekt på hydrerings-hastigheten och cis-transförhållandet undersöktes i detalj. En optimal metalldispersion som gav den högsta dekarboxyleringshastigheten hittades. Massöverföringens inverkan på reaktionens hastighet studerades experimentellt och temperaturprogrammerad desorption av kolmonoxid från katalysatorytan undersöktes ingående. Hydrering av växtoljor genomfördes under satsvisa och kontinuerliga betingelser. Både finfördelat Pd/C och katalysatorgranulat användes i experimenten. Ett av målen med arbetet var uppskalningen av hydreringsprocesserna. Med tanke på stora produktionsvolymer var det logiskt att undersöka kontinuerliga hydrerings- och dekarboxyleringsteknologier. En kontinuerlig packad bäddreaktor studerades i laboratorieskala, vilket gav viktig information om katalysatorns långtidsstabilitet och deaktivering. Effekten av rena fettsyror och triglycerider som råvara samt metallpartikelstorleken och palladiumhalten studerades med hjälp av den kontinuerliga reaktorn. Produktionskapaciteten som erhölls med satsvis och kontinuerlig drift jämfördes. Dekarboxyleringen av stearinsyra undersöktes också i en kontinuerlig packad bädd. Omsättningsgraden blev 15% för en stabil katalysator.

Chitosan and fungicides on postharvest control of Guignardia citricarpa and on quality of 'Pêra Rio' oranges

Citrus fruits are affected by the black spot disease caused by the fungus Guignardia citricarpa. Chitosan can be used as covering for fruits and may delay the ripening process and inhibit the growth of some fungi. Thus, the control of citrus black spot using chitosan and the fungicides thiabendazole and imazalil was assessed in addition to the physicochemical quality of 'Pêra Rio' oranges. The oranges were immersed into chitosan, thiabendazole or imazalil, and in chitosan mixed with both fungicides. The fruits were then stored at 25 °C, 80% RH, for 7 days and, after this storage period, subjected to physicochemical analyses. Chitosan in association with the fungicides reduced black spot in 'Pêra Rio' oranges and delayed the change in the orange skin colour from green to yellow during the postharvest storage. Total soluble solids, titratable acidity, pH, ascorbic acid content and ratio were not influenced by the treatments. Thus, chitosan applied with the fungicides thiabendazole and imazalil showed potential to control the development of black spot lesions on 'Pêra Rio' oranges during the postharvest period.

Potential impact of the global climate changes on the spatial distribution of areas of risk for the occurrence of eucalyptus rust in Brazil

Rust, caused by Puccinia psidii, is one of the most important diseases affecting eucalyptus in Brazil. This pathogen causes disease in mini-clonal garden and in young plants in the field, especially in leaves and juvenile shoots. Favorable climate conditions for infection by this pathogen in eucalyptus include temperature between 18 and 25 ºC, together with at least 6-hour leaf wetness periods, for 5 to 7 consecutive days. Considering the interaction between the environment and the pathogen, this study aimed to evaluate the potential impact of global climate changes on the spatial distribution of areas of risk for the occurrence of eucalyptus rust in Brazil. Thus, monthly maps of the areas of risk for the occurrence of this disease were elaborated, considering the current climate conditions, based on a historic series between 1961 and 1990, and the future scenarios A2 and B2, predicted by IPCC. The climate conditions were classified into three categories, according to the potential risk for the disease occurrence, considering temperature (T) and air relative humidity (RH): i) high risk (18 < T < 25 ºC and RH > 90%); ii) medium risk (18 < T < 25 ºC and RH < 90%; T< 18 or T > 25 ºC and RH > 90%); and iii) low risk (T < 18 or T > 25 ºC and RH < 90%). Data about the future climate scenarios were supplied by GCM Change Fields. In this study, the simulation model Hadley Centers for Climate Prediction and Research (HadCm3) was adopted, using the software Idrisi 32. The obtained results led to the conclusion that there will be a reduction in the area favorable to eucalyptus rust occurrence, and such a reduction will be gradual for the decades of 2020, 2050 and 2080 but more marked in scenario A2 than in B2. However, it is important to point out that extensive areas will still be favorable to the disease development, especially in the coldest months of the year, i.e., June and July. Therefore, the zoning of areas and periods of higher occurrence risk, considering the global climate changes, becomes important knowledge for the elaboration of predicting models and an alert for the integrated management of this disease.

Comparisons between two economically valuable forest species (Eucalyptus grandis and Pinus taeda) in relation to seed behaviour under controlled deterioration

The objectives of this work were to analyze seed behaviour under controlled deterioration and estimate viability equations for forest species Eucalyptus grandis and Pinus taeda. Desired moisture content levels were achieved from initial values after either rehydration over water or drying over silica gel, both at 25 ºC. Seed sub samples with 8 moisture contents each for E. grandis (1.2 to 18.1%, initial value of 11.3%) and P. taeda (1.5 to 19.5%, initial value of 12.9%) were sealed in laminate aluminium-foil packets and stored in incubators maintained at 40, 50 and 65 ºC. The seeds from these species exhibited true orthodox and sub-orthodox storage behaviour, respectively, however E. grandis showed higher seed storability, probably due to a different seed chemical composition. Lowest moisture content limits estimated for application of the viability equations at 65 ºC were 4.9 and 4.1 mc for E. grandis and P. taeda, on equilibrium with ±20% RH. The viability equation estimated quantified the response of seed longevity to storage environment well with K E = 9.661 and 8.838; C W = 6.467 and 5.981; C H = 0.03498 and 0.10340; C Q = 0.0002330 and 0.0005476, for E. grandis and P. taeda, respectively.

Benefits of automated acclimatization during the pre-milking phase of lactating girolando cows

The aim of this paper was to evaluate the automated acclimatization effects during pre-milking of cows on thermal conditioning, physiology, milk production and cost-benefit of the automated adiabatic evaporative cooling system (AECS). The treatments 20; 30; 40 min and control consisted of exposure time of pre-milking cows to the automated AECS. Sixteen cows were used with an average daily milk yield of 19 kg, distributed in a 4 x 4 Latin square design. The Tukey's test (P<0.05) was used to compare the means. The environmental variables, dry bulb temperature (DBT, ºC) and relative humidity (RH, %), were recorded every minute, which allowed the determination of the system efficiency through the Temperature and Humidity Index (THI). The respiratory rate (RR), rectal temperature (RT) and temperature of the coat (TC) were measured before and after the acclimatization. The 40 min treatment kept the environmental variables and the comfort indexes within recommended limits. The physiological variables (RR, RT and TC) were lower in the 40 min treatment and reflected positively on milk production, which increased 3.66% compared to the control treatment. The system was profitable, having a 43 days return on investment and a monthly revenue increase of R$ 1,992.67.

Thermal performance and concentration of gases in facilities for pigs in semiarid region from State of Paraiba - Brazil

The study was conducted in a facility for pigs during the nursery and finishing in the town of 'Montadas', in the semiarid of the state of Paraiba, Brazil, in the rainy and dry season, aiming to evaluate the concentration of oxygen, methane, carbon monoxide and ammonia, and the bioclimatic indexes: ambient temperature (AT), relative humidity (RH) and the index of black globe temperature and humidity (IBGTH). These indexes differed significantly (P>0.05) between the periods and times. The AT in the rainy season was in the thermal comfort zone(TCZ) in most of the times in the nursery; for the finishing phase, thermal discomfort occurred; during the dry season, there was thermal comfort in the nursery phase; in the finishing phase the thermal discomfort occurred at all times. In the rainy season, the IBGTH was in TCZ; in the dry season, it was above the TCZ. The RH in the rainy period was in the TCZ; in the dry season, in most of the times, below the range of the TCZ. The concentration of gases showed no differences (P > 0.05) between periods and between the times, and the carbon monoxide, hydrogen sulfide and methane were below 1.0 ppm, and the ammonia showed a mean of 5.2 ppm. None of the analyzed gases exceeded the limits established by Brazilian and international standards for animals and workers.

Environment in poultry production covered with thermal and aluminum roofing tiles

Brazil is a country of tropical climate, a fact that hinders the poultry production in the aspect of thermal comfort. Thus, we aimed to evaluate the thermal environment in commercial poultry houses with different covers during the months of December 2012 to May 2013, in the municipality of Rio Verde, Goiás. The experimental design was completely randomized in split plots with factorial arrangement of treatments 2x3, being two shed models (thermal and aluminum roof tiles) and three sections within each shed (initial, central and final) for 182 days, having the days as replicates. The thermal environment was assessed through thermal comfort indices: Temperature and Humidity Index, Black Globe Temperature and Humidity Index, Radiant Heat Load and Enthalpy. The data was analyzed by SISVAR 5.1., through the analysis of variance, the Scott Knott test used to compare the means, considering a significance level of 1%. The results showed a significant statistical difference between the sheds and the points assessed (P < 0.05). The thermal shed had the lowest values for the environmental variables (Dbt and Bgt) and thermal indices studied, but larger values for the RH compared to the shed with aluminum covering. The use of thermal covers minimizes the difference in temperature range throughout various times of the day, being at 14:00 o'clock the prominence time to others.

Associated factors to empyema in post-traumatic hemotorax

ABSTRACTObjective:to analyze the associated factors with empyema in patients with post-traumatic retained hemothorax.Methods:prospective observational study. Data were collected in patients undergoing PD during emergency duty. Variables analyzed were age, sex, mechanism of injury, side of the chest injury, intrathoracic complications of RH, laparotomy, specific injuries, rib fractures, trauma scores, days to diagnosis, diagnostic method of RH, primary indication of PD, initial volume drained, length of the first tube removal, surgical procedure. Cumulative incidence of empyema, pneumonia and pulmonary contusion and the proportion of patients with empyema or without empyema in each category of each variable analyzed were obtained.Results: the cumulative incidence of PD among trauma patients was 1.83% and the RH among those with PD was 10.63%. There were 20 cases of empyema (32.8%). Most were male in the age from 20 to 29, victims of injury by firearm on the left side of the thorax. The incidence of empyema in patients with injury by firearms was lower compared to those with stab wound or blunt trauma; higher among those with drained volume between 300 and 599 ml. The median hospital lenght of stay was higher among those with empyema.Conclusion:the incidence of PD was 1.83% and RH was 10.63%, these results are consistent with the low severity of the patients involved in this study and consistent with the literature. The incidence of empyema proved to be negatively associated with the occurrence of injury by firearms and positively associated with a drained volume between 300 and 599 ml, compared with lower or higher volumes.