Grundlegende Untersuchungen zum Verhalten ausgewählter Seltenerdelemente bei Explosionen und zur Anwendbarkeit spezieller Methoden zu deren Analyse

Bisher ist bei forensischen Untersuchungen von Explosionen die Rückverfolgung der verwendeten Sprengstoffe begrenzt, da das Material in aller Regel bei der Explosion zerstört wird. Die Rückverfolgung von Sprengstoffen soll mit Hilfe von Identifikations-Markierungssubstanzen erleichtert werden. Diese stellen einen einzigartigen Code dar, der auch nach einer Sprengung wiedergefunden und identifiziert werden kann. Die dem Code zugeordneten, eindeutigen Informationen können somit ausgelesen werden und liefern der Polizei bei der Aufklärung weitere Ansätze.rnZiel der vorliegenden Arbeit ist es, das Verhalten von ausgewählten Seltenerdelementen (SEE) bei Explosion zu untersuchen. Ein auf Lanthanoidphosphaten basierender Identifikations-Markierungsstoff bietet die Möglichkeit, verschiedene Lanthanoide innerhalb eines einzelnen Partikels zu kombinieren, wodurch eine Vielzahl von Codes generiert werden kann. Somit kann eine Veränderung der Ausgangszusammensetzung des Codes auch nach einer Explosion durch die Analyse eines einzelnen Partikels sehr gut nachvollzogen und somit die Eignung des Markierungsstoffes untersucht werden. Eine weitere Zielsetzung ist die Überprüfung der Anwendbarkeit der Massenspektrometrie mit induktiv gekoppeltem Plasma (ICP-MS) und Partikelanalyse mittels Rasterelektronenmikroskopie (REM) für die Analyse der versprengten Identifikations-Markierungssubstanzen. rnDie Ergebnisbetrachtungen der ICP-MS-Analyse und REM-Partikelanalyse deuten zusammenfassend auf eine Fraktionierung der untersuchten Lanthanoide oder deren Umsetzungsprodukte nach Explosion in Abhängigkeit ihrer thermischen Belastbarkeit. Die Befunde zeigen eine Anreicherung der Lanthanoide mit höherer Temperaturbeständigkeit in größeren Partikeln, was eine Anreicherung von Lanthanoiden mit niedrigerer Temperaturbeständigkeit in kleineren Partikeln impliziert. Dies lässt sich in Ansätzen durch einen Fraktionierungsprozess in Abhängigkeit der Temperaturstabilität der Lanthanoide oder deren Umsetzungsprodukten erklären. Die der Fraktionierung zugrunde liegenden Mechanismen und deren gegenseitige Beeinflussung bei einer Explosion konnten im Rahmen dieser Arbeit nicht abschließend geklärt werden.rnDie generelle Anwendbarkeit und unter Umständen notwendige, komplementäre Verwendung der zwei Methoden ICP-MS und REM-Partikelanalyse wird in dieser Arbeit gezeigt. Die ICP-MS stellt mit großer untersuchter Probenfläche und hoher Genauigkeit eine gute Methode zur Charakterisierung der Konzentrationsverhältnisse der untersuchten Lanthanoide dar. Die REM-Partikelanalyse hingegen ermöglicht im Falle von Kontamination der Proben mit anderen Lanthanoid-haltigen Partikeln eine eindeutige Differenzierung der Elementvergesellschaftung pro Partikel. Sie kann somit im Gegensatz zur ICP-MS Aufschluss über die Art und Zusammensetzung der Kontamination geben. rnInnerhalb der vorgenommenen Untersuchungen stellte die bei der ICP-MS angewandte Probennahmetechnik eine ideale Art der Probennahme dar. Bei anderen Oberflächen könnte diese jedoch in Folge der in verschiedenen Partikelgrößen resultierenden Fraktionierung zu systematisch verfälschten Ergebnissen führen. Um die generelle Anwendbarkeit der ICP-MS im Hinblick auf die Analyse versprengter Lanthanoide zu gewährleisten, sollte eine Durchführung weiterer Sprengungen auf unterschiedlichen Probenoberflächen erfolgen und gegebenenfalls weitere Probennahme-, Aufschluss- und Anreicherungsverfahren evaluiert werden.rn

Poverty in Slovenia: A Conseqence of Economic Transition

Slovenia is considered to be one of the most successful Central and Eastern European countries undergoing the process of transition. It has a high GDP per capita (the highest in the Visegrad group) amounting to about 7200 US dollars (at the exchange rates pertaining during Ms. Stropnik's research). In 1994, a low rate of inflation, a low level of public debt and almost balanced public finances, were all positive elements. However, there is a darker side, for instance the dramatic increase in unemployment and (somewhat less dramatic) fall in production during the transition period. This analysis aimed to provide insights into what is actually happening at the household level, since households are the ultimate bearers of macroeconomic and social change. The final output totalled 166 pages in English and Slovenian, available also on disc. The income concept used by Ms. Stropnik is that of the disposable (monetary) household income, i.e. the cash income of all household members - including social security transfers and family benefits, and the net sum of taxes and social security contributions - plus the equivalent of domestic production, used in the household. Non-monetary income sources, such as household own production, benefits in kind, subsidies for goods and services, and fringe benefits, were not taken into account. The concept of relative and objective poverty was followed. Poverty means having less than others in society, it is a state of relative deprivation. Objective aspects of the situation, e.g. command over resources (i.e. the household income) and the relative position of the household in the income distribution, determine who is poor and who is not. Changes in household composition - an increase in the number of pensioners, unemployed and self-employed, concomitant with a large decrease in the number of employees - obviously played a part in the changing structure of household income sources during this period. The overall decrease in the share of wages and salaries from primary employment in 1993 is to be observed in all income deciles. On the other hand, the importance of salaries gained from secondary employment has increased in all deciles. The lower seven deciles experienced a sharp rise in the share of social benefits in the period 1988-1993, mostly because of the increase in the number of persons entitled to claim unemployment benefits. In Slovenia, income inequality has increased considerably during the 1988-1993 period. To make matters worse, the large increase in income inequality occurred in a period of falling real incomes. In 1983 the bottom decile disposed of 3.8 percent and the top decile disposed of 23.4 percent of total monetary income in Slovenia, whereas by 1993 the same statistics revealed 3.1 percent and 18.9 percent respectively. Unemployment greatly increases the risk of living in poverty. In 1993, 35 per cent of all unemployed persons in Slovenia were living in the lowest income quintile. Ms. Stropnik found certain features that were specific to Slovenia and not shared by most countries in transition. For example, the relative income position of pensioners has improved. Retirement did not increase the risk of poverty in 1993 as much as it did in 1983 and 1988. Also, it appears that children have not been particularly hard-hit by the transition upheavals. The incidence of poverty amongst children has not increased in the period 1983-1993. Children were also fairly evenly distributed across income quintiles. In 1983, 11.8 percent of households with children aged 18 or less were poor. In 1993, this figure was 8.4 per cent. On the other hand, poor households with children were, in comparison with other households of the same type, poorer in 1993 than in 1983. Ms. Stropnik also analysed the impact of social transfers. Her conclusion was that the level of social transfers prevented them from being successful in alleviating poverty. Family policy transfers (child allowances, child tax allowances, subsidised child care) did, however, contribute to the lowering of income inequality between families with and without children, and amongst families with different numbers of children. Ms. Stropnik is determined that the results of her research be used in the creation of social policy aimed at helping the poor. She quotes Piachaud approvingly: "If the term 'poverty' carries with it the implication and moral imperative that something should be done about it, then the study of poverty is only ultimately justifiable if it influences individual and social attitudes and actions."

Digital processing and data compilation approach for using remotely sensed imagery to identify geological lineaments in hard-rock terrains : an application for groundwater explorations in Nicaragua

Sustainable yields from water wells in hard-rock aquifers are achieved when the well bore intersects fracture networks. Fracture networks are often not readily discernable at the surface. Lineament analysis using remotely sensed satellite imagery has been employed to identify surface expressions of fracturing, and a variety of image-analysis techniques have been successfully applied in “ideal” settings. An ideal setting for lineament detection is where the influences of human development, vegetation, and climatic situations are minimal and hydrogeological conditions and geologic structure are known. There is not yet a well-accepted protocol for mapping lineaments nor have different approaches been compared in non-ideal settings. A new approach for image-processing/synthesis was developed to identify successful satellite imagery types for lineament analysis in non-ideal terrain. Four satellite sensors (ASTER, Landsat7 ETM+, QuickBird, RADARSAT-1) and a digital elevation model were evaluated for lineament analysis in Boaco, Nicaragua, where the landscape is subject to varied vegetative cover, a plethora of anthropogenic features, and frequent cloud cover that limit the availability of optical satellite data. A variety of digital image processing techniques were employed and lineament interpretations were performed to obtain 12 complementary image products that were evaluated subjectively to identify lineaments. The 12 lineament interpretations were synthesized to create a raster image of lineament zone coincidence that shows the level of agreement among the 12 interpretations. A composite lineament interpretation was made using the coincidence raster to restrict lineament observations to areas where multiple interpretations (at least 4) agree. Nine of the 11 previously mapped faults were identified from the coincidence raster. An additional 26 lineaments were identified from the coincidence raster, and the locations of 10 were confirmed by field observation. Four manual pumping tests suggest that well productivity is higher for wells proximal to lineament features. Interpretations from RADARSAT-1 products were superior to interpretations from other sensor products, suggesting that quality lineament interpretation in this region requires anthropogenic features to be minimized and topographic expressions to be maximized. The approach developed in this study has the potential to improve siting wells in non-ideal regions.

Water quality and health in a Sahelian semi-arid urban context: an integrated geographical approach in Nouakchott, Mauritania

Access to sufficient quantities of safe drinking water is a human right. Moreover, access to clean water is of public health relevance, particularly in semi-arid and Sahelian cities due to the risks of water contamination and transmission of water-borne diseases. We conducted a study in Nouakchott, the capital of Mauritania, to deepen the understanding of diarrhoeal incidence in space and time. We used an integrated geographical approach, combining socio-environmental, microbiological and epidemiological data from various sources, including spatially explicit surveys, laboratory analysis of water samples and reported diarrhoeal episodes. A geospatial technique was applied to determine the environmental and microbiological risk factors that govern diarrhoeal transmission. Statistical and cartographic analyses revealed concentration of unimproved sources of drinking water in the most densely populated areas of the city, coupled with a daily water allocation below the recommended standard of 20 l per person. Bacteriological analysis indicated that 93% of the non-piped water sources supplied at water points were contaminated with 10-80 coliform bacteria per 100 ml. Diarrhoea was the second most important disease reported at health centres, accounting for 12.8% of health care service consultations on average. Diarrhoeal episodes were concentrated in municipalities with the largest number of contaminated water sources. Environmental factors (e.g. lack of improved water sources) and bacteriological aspects (e.g. water contamination with coliform bacteria) are the main drivers explaining the spatio-temporal distribution of diarrhoea. We conclude that integrating environmental, microbiological and epidemiological variables with statistical regression models facilitates risk profiling of diarrhoeal diseases. Modes of water supply and water contamination were the main drivers of diarrhoea in this semi-arid urban context of Nouakchott, and hence require a strategy to improve water quality at the various levels of the supply chain.

Energy harvesting through arterial wall deformation: A FEM approach to fluid–structure interactions and magneto-hydrodynamics

Engineers are confronted with the energy demand of active medical implants in patients with increasing life expectancy. Scavenging energy from the patient’s body is envisioned as an alternative to conventional power sources. Joining in this effort towards human-powered implants, we propose an innovative concept that combines the deformation of an artery resulting from the arterial pressure pulse with a transduction mechanism based on magneto-hydrodynamics. To overcome certain limitations of a preliminary analytical study on this topic, we demonstrate here a more accurate model of our generator by implementing a three-dimensional multiphysics finite element method (FEM) simulation combining solid mechanics, fluid mechanics, electric and magnetic fields as well as the corresponding couplings. This simulation is used to optimize the generator with respect to several design parameters. A first validation is obtained by comparing the results of the FEM simulation with those of the analytical approach adopted in our previous study. With an expected overall conversion efficiency of 20% and an average output power of 30 μW, our generator outperforms previous devices based on arterial wall deformation by more than two orders of magnitude. Most importantly, our generator provides sufficient power to supply a cardiac pacemaker.

Source apportionment and dynamic changes of carbonaceous aerosols during the haze bloom-decay process in China based on radiocarbon and organic molecular tracers

Fine carbonaceous aerosols (CAs) is the key factor influencing the currently filthy air in megacities in China, yet few studies simultaneously focus on the origins of different CAs species using specific and powerful source tracers. Here, we present a detailed source apportionment for various CAs fractions, including organic carbon (OC), water-soluble OC (WSOC), water-insoluble OC (WIOC), elemental carbon (EC) and secondary OC (SOC) in the largest cities of North (Beijing, BJ) and South China (Guangzhou, GZ), using the measurements of radiocarbon and anhydrosugars. Results show that non-fossil fuel sources such as biomass burning and biogenic emission make a significant contribution to the total CAs in Chinese megacities: 56±4 in BJ and 46±5% in GZ, respectively. The relative contributions of primary fossil carbon from coal and liquid petroleum combustions, primary non-fossil carbon and secondary organic carbon (SOC) to total carbon are 19, 28 and 54% in BJ, and 40, 15 and 46% in GZ, respectively. Non-fossil fuel sources account for 52 in BJ and 71% in GZ of SOC, respectively. These results suggest that biomass burning has a greater influence on regional particulate air pollution in North China than in South China. We observed an unabridged haze bloom-decay process in South China, which illustrates that both primary and secondary matter from fossil sources played a key role in the blooming phase of the pollution episode, while haze phase is predominantly driven by fossil-derived secondary organic matter and nitrate.

REGULATION OF ALTERNATIVE CARBON METABOLISM IN CANDIDA ALBICANS

Candida albicans is the most important fungal pathogen of humans. Transcript profiling studies show that upon phagocytosis by macrophages, C. albicans undergoes a massive metabolic reorganization activating genes involved in alternative carbon metabolism, including the glyoxylate cycle, β-oxidation and gluconeogenesis. Mutations in key enzymes such as ICL1 (glyoxylate cycle) and FOX2 (fatty acid β-oxidation) revealed that alternative carbon metabolic pathways are required for full virulence in C. albicans. These studies indicate C. albicans uses non-preferred carbon sources allowing its adaptation to microenvironments were nutrients are scarce. It has become apparent that the regulatory networks required for regulation of alternative carbon metabolism in C. albicans are considerably different from the Saccharomyces cerevisiae paradigm and appear more analogous to the Aspergillus nidulans systems. Well-characterized transcription factors in S. cerevisiae have no apparent phenotype or are missing in C. albicans. CTF1 was found to be a single functional homolog of the A. nidulans FarA/FarB proteins, which are transcription factors required for fatty acid utilization. Both FOX2 and ICL1 were found to be part of a large CTF1 regulon. To increase our understanding of how CTF1 regulates its target genes, including whether regulation is direct or indirect, the FOX2 and ICL1 promoter regions were analyzed using a combination of bioinformatics and promoter deletion analysis. To begin characterizing the FOX2 and ICL1 promoters, 5’ rapid amplification of cDNA ends (5’RACE) was used to identify two transcriptional initiation sites in FOX2 and one in ICL1. GFP reporter assays show FOX2 and ICL1 are rapidly expressed in the presence of alternative carbon sources. Both FOX2 and ICL1 harbor the CCTCGG sequence known to be bound by the Far proteins, hence rendering the motif as a putative CTF1 DNA binding element. In this study, the CCTCGG sequence was found to be essential for FOX2 regulation. However, this motif does not appear to be equally important for the regulation of ICL1. This study supports the notion that although C. albicans has diverged from the paradigms of model fungi, C. albicans has made specific adaptations to its transcription-based regulatory network that may contribute to its metabolic flexibility.

Miscanthus Establishment and Survival

Rising costs of petroleum fuels and increased awareness of the adverse effects of greenhouse gases have spurred interest in renewable fuels and other ‘green’ products. Recent legislation has set goals of approximately 20 billion gallons of renewable fuel produced from non-corn starch sources by the year 2022. These driving forces have increased interest in dedicated bioenergy crops. Among perennial grasses, which have received an exceptional amount of attention as dedicated energy crops, one stands out: Miscanthus (Miscanthus x giganteus).

Miscanthus Establishment and Survival

Rising costs of petroleum fuels and increased awareness of the adverse effects of greenhouse gases have spurred interest in renewable fuels and other ‘green’ products. Recent legislation has set goals of approximately 20 billion gallons of renewable fuel produced from non-corn starch sources by the year 2022. These driving forces have increased interest in dedicated bioenergy crops. Among perennial grasses, which have received an exceptional amount of attention as dedicated energy crops, one stands out: Miscanthus (Miscanthus x giganteus).

Properties of seawater (partial pressure of carbon dioxide (pCO2)) from a ProOceanus CO2-Pro sensor mounted on the continuous surface water sampling system during the Tara Oceans expedition 2009-2013

The Tara Oceans Expedition (2009-2013) sampled the world oceans on board a 36 m long schooner, collecting environmental data and organisms from viruses to planktonic metazoans for later analyses using modern sequencing and state-of-the-art imaging technologies. Tara Oceans Data are particularly suited to study the genetic, morphological and functional diversity of plankton. The present data set provides continuous measurements of partial pressure of carbon dioxide (pCO2), using a ProOceanus CO2-Pro instrument mounted on the flowthrough system. This automatic sensor is fitted with an equilibrator made of gas permeable silicone membrane and an internal detection loop with a non-dispersive infrared detector of PPSystems SBA-4 CO2 analyzer. A zero-CO2 baseline is provided for the subsequent measurements circulating the internal gas through a CO2 absorption chamber containing soda lime or Ascarite. The frequency of this automatic zero point calibration was set to be 24 hours. All data recorded during zeroing processes were discarded with the 15-minute data after each calibration. The output of CO2-Pro is the mole fraction of CO2 in the measured water and the pCO2 is obtained using the measured total pressure of the internal wet gas. The fugacity of CO2 (fCO2) in the surface seawater, whose difference with the atmospheric CO2 fugacity is proportional to the air-sea CO2 fluxes, is obtained by correcting the pCO2 for non-ideal CO2 gas concentration according to Weiss (1974). The fCO2 computed using CO2-Pro measurements was corrected to the sea surface condition by considering the temperature effect on fCO2 (Takahashi et al., 1993). The surface seawater observations that were initially estimated with a 15 seconds frequency were averaged every 5-min cycle. The performance of CO2-Pro was adjusted by comparing the sensor outputs against the thermodynamic carbonate calculation of pCO2 using the carbonic system constants of Millero et al. (2006) from the determinations of total inorganic carbon (CT ) and total alkalinity (AT ) in discrete samples collected at sea surface. AT was determined using an automated open cell potentiometric titration (Haraldsson et al. 1997). CT was determined with an automated coulometric titration (Johnson et al. 1985; 1987), using the MIDSOMMA system (Mintrop, 2005). fCO2 data are flagged according to the WOCE guidelines following Pierrot et al. (2009) identifying recommended values and questionable measurements giving additional information about the reasons of the questionability.

Comparative exergy analysis of direct alcohol fuel cells using fuel mixtures

Within the last years there has been increasing interest in direct liquid fuel cells as power sources for portable devices and, in the future, power plants for electric vehicles and other transport media as ships will join those applications. Methanol is considerably more convenient and easy to use than gaseous hydrogen and a considerable work is devoted to the development of direct methanol fuel cells. But ethanol has much lower toxicity and from an ecological viewpoint ethanol is exceptional among all other types of fuel as is the only chemical fuel in renewable supply. The aim of this study is to investigate the possibility of using direct alcohol fuel cells fed with alcohol mixtures. For this purpose, a comparative exergy analysis of a direct alcohol fuel cell fed with alcohol mixtures against the same fuel cell fed with single alcohols is performed. The exergetic efficiency and the exergy loss and destruction are calculated and compared in each case. When alcohol mixtures are fed to the fuel cell, the contribution of each fuel to the fuel cell performance is weighted attending to their relative proportion in the aqueous solution. The optimum alcohol composition for methanol/ethanol mixtures has been determined.

Magneto-optic current sensor with Faraday mirror for linear birefringence compensation

Fiber optic sensors have some advantages in subjects related with electrical current and magnetic field measurement. In spite of the optical fiber utilization advantages we have to take into account undesirable effects, which are present in real non-ideal optical fibers. In telecommunication and sensor application fields the presence of inherent and induced birefringence is crucial. The presence of birefringence may cause an undesirable change in the polarization state. In order to compensate the linear birefringence a promising method has been chosen. This method employs orthogonal polarization conjugation in the back propagation direction of the light wave in the fiber. A study and a simulation of an experimental setup are realized with the advantage of a significant sensitivity improvement.

Sensor magneto-óptico de corriente con supresión de birrefringencia lineal mediante espejo de Faraday

Fiber optic sensors have some advantages in subjects related with electrical current and magnetic field measurement. In spite of the optical fiber utilization advantages we have to take into account undesirable effects, which are present in real non-ideal optical fibers. In telecommunication and sensor application fields the presence of inherent and induced birefringence is crucial. The presence of birefringence may cause an undesirable change in the polarization state. In order to compensate the linear birefringence a promising method has been chosen. This method employs orthogonal polarization conjugation in the back propagation direction of the light wave in the fiber. A study and a simulation of an experimental setup are realized with the advantage of a significant sensitivity improvement.

Search strategies and the automated control of plant diseases

We propose the use of the "infotaxis" search strategy as the navigation system of a robotic platform, able to search and localize infectious foci by detecting the changes in the profile of volatile organic compounds emitted by and infected plant. We builded a simple and cost effective robot platform that substitutes odour sensors in favour of light sensors and study their robustness and performance under non ideal conditions such as the exitence of obstacles due to land topology or weeds.

Modeling Piezoelectric Harvesting Materials in Road Traffic Applications.

En esta comunicación se presenta el método para obtener modelos equivalentes eléctricos de materiales piezoeléctricos utilizados en entornos con tráfico vial para aplicaciones "Energy Harvesting". Los resultados experimentales se procesan para determinar la estructura topológica óptima y la tecnología de los elementos semiconductores utilizados en la etapa de entrada del sistema de alimentación "harvesting". Asimismo se presenta el modelo de la fuente de alimentación no regulada bajo demanda variable de corriente. Abstract: The method to obtain electrical equivalent models of piezoelectric materials used in energy harvesting road traffic environment is presented in this paper. The experimental results are processed in order to determine the optimal topological structure and technology of the semiconductor elements used in the input stage of the power harvesting system. The non regulated power supply model under variable current demand is also presented.