Molecularly-Imprinted Materials for Potentiometric Transduction: Application to the Antibiotic Enrofloxacin

Enrofloxacin (ENR) is an antimicrobial used both in humans and in food producing species. Its control is required in farmed species and their surroundings in order to reduce the prevalence of antibiotic resistant bacteria. Thus, a new biomimetic sensor enrofloxacin is presented. An artificial host was imprinted in specific polymers. These were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. The potentiometric sensors exhibited a near-Nernstian response. Slopes expressing mV/Δlog([ENR]/M) varied within 48–63. The detection limits ranged from 0.28 to 1.01 µg mL−1. Sensors were independent from the pH of test solutions within 4–7. Good selectivity was observed toward potassium, calcium, barium, magnesium, glycine, ascorbic acid, creatinine, norfloxacin, ciprofloxacin, and tetracycline. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ± 0.7%), fast response, good sensitivity (47 mV/Δlog([ENR]/M), wide linear range (1.0 × 10−5–1.0 × 10−3 M), low detection limit (0.9 µg mL−1), and a stable baseline for a 5 × 10−2 M acetate buffer (pH 4.7) carrier. The sensors were used to analyze fish samples. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in vivo measurements of enrofloxacin or parent-drugs.

New sensing materials of molecularly-imprinted polymers for the selective recognition of Chlortetracycline

As a result of the stressful conditions in aquaculture facilities there is a high risk of bacterial infections among cultured fish. Chlortetracycline (CTC) is one of the antimicrobials used to solve this problem. It is a broad spectrum antibacterial active against a wide range of Gram-positive and Gram-negative bacteria. Numerous analytical methods for screening, identifying, and quantifying CTC in animal products have been developed over the years. An alternative and advantageous method should rely on expeditious and efficient procedures providing highly specific and sensitive measurements in food samples. Ion-selective electrodes (ISEs) could meet these criteria. The only ISE reported in literature for this purpose used traditional electro-active materials. A selectivity enhancement could however be achieved after improving the analyte recognition by molecularly imprinted polymers (MIPs). Several MIP particles were synthesized and used as electro-active materials. ISEs based in methacrylic acid monomers showed the best analytical performance according to slope (62.5 and 68.6 mV/decade) and detection limit (4.1 × 10−5 and 5.5 × 10−5 mol L−1). The electrodes displayed good selectivity. The ISEs are not affected by pH changes ranging from 2.5 to 13. The sensors were successfully applied to the analysis of serum, urine and fish samples.

Selective recognition in potentiometric transduction of amoxicillin by molecularly imprinted materials

The indiscriminate use of antibiotics in food-producing animals has received increasing attention as a contributory factor in the international emergence of antibiotic-resistant bacteria (Woodward in Pesticide, veterinary and other residues in food, CRC Press, Boca Raton, 2004). Numerous analytical methods for quantifying antibacterial residues in edible animal products have been developed over years (Woodward in Pesticide, veterinary and other residues in food, CRC Press, Boca Raton, 2004; Botsoglou and Fletouris in Handbook of food analysis, residues and other food component analysis, Marcel Dekker, Ghent, 2004). Being Amoxicillin (AMOX) one of those critical veterinary drugs, efforts have been made to develop simple and expeditious methods for its control in food samples. In literature, only one AMOX-selective electrode has been reported so far. In that work, phosphotungstate:amoxycillinium ion exchanger was used as electroactive material (Shoukry et al. in Electroanalysis 6:914–917, 1994). Designing new materials based on molecularly imprinted polymers (MIPs) which are complementary to the size and charge of AMOX could lead to very selective interactions, thus enhancing the selectivity of the sensing unit. AMOX-selective electrodes used imprinted polymers as electroactive materials having AMOX as target molecule to design a biomimetic imprinted cavity. Poly(vinyl chloride), sensors of methacrylic acid displayed Nernstian slopes (60.7 mV/decade) and low detection limits (2.9 × 10−5 mol/L). The potentiometric responses were not affected by pH within 4–5 and showed good selectivity. The electrodes were applied successfully to the analysis of real samples.

Ensino direto da matemática funcional: estudo de caso

Neste estudo, focado na aprendizagem do manuseio do dinheiro, pretendeu-se que os alunos adquirissem competências que os habilitasse a um maior grau de independência e participação na vida em sociedade, desempenhando tarefas de cariz financeiro de forma mais independente, por exemplo, compra de produtos, pagamento de serviços e gestão do dinheiro. Para alcançar o pretendido, utilizou-se a metodologia do ensino direto, com tarefas estruturadas. Numa fase inicial o investigador prestava apoio constante aos alunos, que foi diminuindo gradualmente à medida que atingiam as competências relacionadas com o dinheiro. Na fase final, os alunos realizaram as tarefas propostas de forma autónoma. Construído como um estudo de caso, os dados foram recolhidos através de observação direta e de provas de monitorização. Os alunos começaram por realizar uma avaliação inicial para delinear a linha de base da intervenção. Posteriormente, foi realizada a intervenção baseada no ensino direto, com recurso ao computador, à calculadora, a provas de monitorização e ao manuseio de dinheiro. O computador foi utilizado na intervenção como tecnologia de apoio à aprendizagem, permitindo a realização de jogos interativos e consulta de materiais. No final da intervenção os alunos revelaram autonomia na resolução das tarefas, pois já tinham automatizado os processos matemáticas para saber manusear corretamente a moeda euro. O ensino direto auxiliou os alunos a reterem as competências matemáticas essenciais de manuseamento do dinheiro, compondo quantias, efetuando pagamentos e conferindo trocos, que muito podem contribuir para terem uma participação independente na vida em sociedade

Aumentar as oportunidades de comunicação nos momentos de brincadeira - descrição de um programa de intervenção

Objetivo: Partindo da análise da literatura realizada, em que é salientada a ideia de que o desenvolvimento e aprendizagem ocorrem a partir das experiências e influência dos contextos em que as crianças estão incluídas e a partir das interações que estabelecem nesses mesmos contextos, pretende-se compreender, neste estudo, se partindo do contexto natural, com diferentes materiais e atores, é possível aumentar as oportunidades de comunicação e participação de uma criança com restrições ao nível da linguagem, nos momentos de jogo. Método: Foi delineado e implementado um programa de intervenção, num estabelecimento de ensino, na valência de pré-escolar, onde estiveram envolvidas uma criança de 4 anos com restrições ao nível da linguagem oral, o grupo de crianças em que estava incluída e a educadora do grupo. Para monitorização do programa e avaliação da sua eficácia realizou-se um pré e pós teste, onde foi definida a linha de base da criança. Ao longo do programa foram registados, a partir de uma grelha de observação da frequência dos atos comunicativos da criança, nas situações de jogo planificadas. Os comportamentos e modelagem realizada por parte educador, foram igualmente registados e analisados. Recorreu-se a realização de entrevistas semiestruturadas para a recolha de dados relativos à criança e perceção do educador. Resultados/Discussão: Os dados recolhidos demonstram um aumento significativo das tomadas de iniciativa verbal e alternância entre turnos, ao longo da intervenção por parte da criança alvo. A presença do adulto e dos pares parecem revelar-se como facilitador dos atos comunicativos da criança com restrições ao nível da linguagem

Structured Light System Calibration for Perception in Underwater Tanks

The process of visually exploring underwater environments is still a complex problem. Underwater vision systems require complementary means of sensor information to help overcome water disturbances. This work proposes the development of calibration methods for a structured light based system consisting on a camera and a laser with a line beam. Two different calibration procedures that require only two images from different viewpoints were developed and tested in dry and underwater environments. Results obtained show, an accurate calibration for the camera/projector pair with errors close to 1 mm even in the presence of a small stereos baseline.

Structured Light System for Underwater Inspection Operations

In this work we propose the development of a stereo SLS system for underwater inspection operations. We demonstrate how to perform a SLS calibration both in dry and underwater environments using two different methods. The proposed methodology is able to achieve quite accurate results, lower than 1 mm in dry environments. We also display a 3D underwater scan of a known object size, a sea scallop, where the system is able to perform a scan with a global error lower than 2% of the object size.

Re-Use Assessment of Thermoset Composite Wastes as Aggregate and Filler Replacement for Concrete-Polymer Composite Materials: A case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.

Sustainability Improvement of a composite materials’ industry through recycling and re-engineering process approaches

Recent Advances in Mechanics and Materials in Design

Dielectric study of triton X100: a glass-forming liquid

Dissertação para obtenção do grau de mestre em Engenharia de Materiais

Desenvolvimento de um sensor para detecção de nano e micro concentrações de deltametrina

Dissertação para obtenção do Grau de Mestre em Engenharia Física

Desenvolvimento e caracterização de filmes de nano-compósitos de TiO2/WO3 pela técnoca de pulverização catódica

Dissertação para obtenção do Grau de Mestre em Engenharia Física

Biodispositivos electrónicos implantáveis e biodegradáveis: estudo de nano/microfibras de polivinilpirrolidona-PVP

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Empirical models for quantification of machining damage in composite materials

Dissertação para obtenção do Grau de Doutor em Engenharia Mecânica

Biodispositivos electrónicos implantáveis e biodegradáveis: nano/microfibras de poli (ε-caprolactona) (PCL)

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica