Eliminació simultània de fòsfor i nitrogen en aigües residuals, utilitzant microorganismes DPAO en un reactor discontinu seqüencial (SBR)

En aquest estudi es realitzà eliminació biològica simultània de fòsfor i nitrogen en un Reactor Discontinu Seqüencial (SBR), el qual conté una biomassa enriquida amb Organismes Desnitrificadors Acumuladors de Fòsfor (DPAO) que utilitzen com a única font de carboni l’àcid propiònic i com acceptors d’electrons: nitrit en la fase anòxica i oxigen en l’aeròbica. L’SBR opera amb cicle de 8 h alternant fase anaeròbica, anòxica i aeròbica. El seguiment del sistema es realitzà mitjançant mesures on-line (titrimetria) i off-line (quantificació d’àcid propiònic, nitrit i fòsfor), utilitzant l’HPLC per quantificar l’àcid propiònic i cromatografia iònica per les mesures de nitrit i fòsfor. Amb aquest sistema es pretén augmentar la captació de fòsfor en la fase anòxica fet que s’aconseguí realitzant diferents canvis al reactor per tal de maximitzar el consum de nitrit en aquesta fase, ja fos allargant el temps de fase o augmentant la concentració de biomassa. Aquest experiment ha suposat un augment de la captació de fòsfor (33 mg P-PO4 3-/L), de l’eliminació neta de fòsfor (17 mg P-PO4 3-/L) i de consum de nitrit (27 mg N-NO2-). Per altra banda, es pretenia veure els efectes a curt termini de l’eliminació de la fase aeròbica a partir del seguiment de 2 cicle puntuals i d’un cicle de 32 h sense fase aeròbica. En ambdós casos s’aconseguí una eliminació neta de fòsfor.

Macronutrients and energy balance in obesity.

Energy balance is the difference between metabolizable energy intake and total energy expenditure. Energy intake is difficult to measure accurately; changes in body weight, for example, are not a good measure of the adequacy of energy intake, because fluctuations in body weight are common even if the overall trend is toward weight loss. It is now customary to assess energy requirements indirectly from total energy expenditure. Total energy expenditure consists of basal metabolism, postprandial thermogenesis, and physical activity. Energy expenditure is related to both body weight and body composition. A reduction in total energy expenditure accompanies weight loss, because basal metabolic rate decreases with the loss of lean tissue mass. Similarly, with weight gain, there is an increase in basal metabolic rate, because lean tissue mass grows to support the increase in fat tissue mass. Excess energy intake over energy expenditure causes weight gain and an accompanying increase in total energy expenditure. Following a period of adaptation, total energy expenditure will match energy intake and body weight will stabilize at a higher level. This same relationship holds for weight loss. Respiratory quotient (measured in steady state) is an indication of the proportion of energy expenditure derived from fat and carbohydrate oxidation. Over long periods of time, fat balance is equivalent to energy balance, as an excess of fat intake over fat oxidation causes fat storage.

A comparison of results from MRIO and interregional computable general equilibrium (CGE) analyses of the impacts of a positive demand shock on the ‘CO2 trade balance’ between Scotland and the rest of the UK

In previous work we have applied the environmental multi-region input-output (MRIO) method proposed by Turner et al (2007) to examine the ‘CO2 trade balance’ between Scotland and the Rest of the UK. In McGregor et al (2008) we construct an interregional economy-environment input-output (IO) and social accounting matrix (SAM) framework that allows us to investigate methods of attributing responsibility for pollution generation in the UK at the regional level. This facilitates analysis of the nature and significance of environmental spillovers and the existence of an environmental ‘trade balance’ between regions. While the existence of significant data problems mean that the quantitative results of this study should be regarded as provisional, we argue that the use of such a framework allows us to begin to consider questions such as the extent to which a devolved authority like the Scottish Parliament can and should be responsible for contributing to national targets for reductions in emissions levels (e.g. the UK commitment to the Kyoto Protocol) when it is limited in the way it can control emissions, particularly with respect to changes in demand elsewhere in the UK. However, while such analysis is useful in terms of accounting for pollution flows in the single time period that the accounts relate to, it is limited when the focus is on modelling the impacts of any marginal change in activity. This is because a conventional demand-driven IO model assumes an entirely passive supply-side in the economy (i.e. all supply is infinitely elastic) and is further restricted by the assumption of universal Leontief (fixed proportions) technology implied by the use of the A and multiplier matrices. In this paper we argue that where analysis of marginal changes in activity is required, a more flexible interregional computable general equilibrium approach that models behavioural relationships in a more realistic and theory-consistent manner, is more appropriate and informative. To illustrate our analysis, we compare the results of introducing a positive demand stimulus in the UK economy using both IO and CGE interregional models of Scotland and the rest of the UK. In the case of the latter, we demonstrate how more theory consistent modelling of both demand and supply side behaviour at the regional and national levels affect model results, including the impact on the interregional CO2 ‘trade balance’.

A balance of questions: what can we ask of climate change economics?

The standard approach to the economics of climate change, which has its best known implementation in Nordhaus's DICE and RICE models (well described in Nordhaus's 2008 book, A Question of Balance) is not well equipped to deal with the possibility of catastrophe, since we are unable to evaluate a risk averse representative agent's expected utility when there is any signi cant probability of zero consumption. Whilst other authors attempt to develop new tools with which to address these problems, the simple solution proposed in this paper is to ask a question that the currently available tools of climate change economics are capable of answering. Rather than having agents optimally choosing a path (that differs from the recommendations of climate scientists) within models which cannot capture the essential features of the problem, I argue that economic models should be used to determine the savings and investment paths which implement climate targets that have been suggested in the physical science literature.

The Inventor Balance and the Functional Specialization in Global Inventive Activities

We study the functional specialization whereby some countries contribute relatively more inventors vs. organizations in the production of inventions at a global scale. We propose a conceptual framework to explain this type of functional specialization, which posits the presence of feedbacks between two distinct sub-systems, each one providing inventors and organizations. We quantify the phenomenon by means of a new metric, the “inventor balance”, which we compute using patent data. We show that the observed imbalances, which are often conspicuous, are determined by several factors: the innovativeness of a country relative to its level of economic development, relative factor endowments, the degree of technological specialization and, last, cultural traits. We argue that the “inventor balance” is a useful indicator for policy makers, and its routine analysis could lead to better informed innovation policies.

Optimal exponent heat balance and refined integral methods applied to Stefan problems

When using a polynomial approximating function the most contentious aspect of the Heat Balance Integral Method is the choice of power of the highest order term. In this paper we employ a method recently developed for thermal problems, where the exponent is determined during the solution process, to analyse Stefan problems. This is achieved by minimising an error function. The solution requires no knowledge of an exact solution and generally produces significantly better results than all previous HBI models. The method is illustrated by first applying it to standard thermal problems. A Stefan problem with an analytical solution is then discussed and results compared to the approximate solution. An ablation problem is also analysed and results compared against a numerical solution. In both examples the agreement is excellent. A Stefan problem where the boundary temperature increases exponentially is analysed. This highlights the difficulties that can be encountered with a time dependent boundary condition. Finally, melting with a time-dependent flux is briefly analysed without applying analytical or numerical results to assess the accuracy.

Application of standard and refined heat balance integral methods to one-dimensional Stefan problems

The work in this paper concerns the study of conventional and refined heat balance integral methods for a number of phase change problems. These include standard test problems, both with one and two phase changes, which have exact solutions to enable us to test the accuracy of the approximate solutions. We also consider situations where no analytical solution is available and compare these to numerical solutions. It is popular to use a quadratic profile as an approximation of the temperature, but we show that a cubic profile, seldom considered in the literature, is far more accurate in most circumstances. In addition, the refined integral method can give greater improvement still and we develop a variation on this method which turns out to be optimal in some cases. We assess which integral method is better for various problems, showing that it is largely dependent on the specified boundary conditions.

Fiscal policy, foresight and the trade balance in the U.S.

This paper investigates the effects of fiscal policy on the trade balance using a structural factor model. A fiscal policy shock worsens the trade balance and produces an appreciation of the domestic currency but the effects are quantitatively small. The findings match the theoretical predictions of the standard Mundell-Fleming model, although fiscal policy should not be considered one of the main causes of the large US external deficit. My conclusions differ from those reached using VAR models since the fiscal shock, possibly due to fiscal foresight, is nonfundamental for the variables typically used in open economy VARs.

Improving the accuracy of heat balance integral methods applied to thermal problems with time dependent boundary conditions

In this paper the two main drawbacks of the heat balance integral methods are examined. Firstly we investigate the choice of approximating function. For a standard polynomial form it is shown that combining the Heat Balance and Refined Integral methods to determine the power of the highest order term will either lead to the same, or more often, greatly improved accuracy on standard methods. Secondly we examine thermal problems with a time-dependent boundary condition. In doing so we develop a logarithmic approximating function. This new function allows us to model moving peaks in the temperature profile, a feature that previous heat balance methods cannot capture. If the boundary temperature varies so that at some time t & 0 it equals the far-field temperature, then standard methods predict that the temperature is everywhere at this constant value. The new method predicts the correct behaviour. It is also shown that this function provides even more accurate results, when coupled with the new CIM, than the polynomial profile. Analysis primarily focuses on a specified constant boundary temperature and is then extended to constant flux, Newton cooling and time dependent boundary conditions.

Institutional Balance in the EU. The Prodi Administration as a Reforming Commission

The essay looks at the Prodi Commission (1999-2004) in the context of the institutional balance in the European Union. Not only did Prodi come into office at a time of unprecedented weakness of the Executive, but the Commission operates within a changing institutional equilibrium, one made more precarious by the shifting political disposition of the Member States

Reactive Nitrogen and Oxygen Intermediates in Patients with Cutaneous Leishmaniasis

The metabolisms of reactive nitrogen and oxygen intermediates (RNI and ROI) in patients with cutaneous leishmaniasis (CL) were investigated and compared with those of healthy subjects. To determine RNI metabolism, nitrite plus nitrate concentrations were measured spectrophotometrically. Nitrite concentration in plasma was determined directly by the Griess method. Nitrate levels in plasma were measured after reduction into nitrite by using copper-cadmium-zinc. ROI metabolism was evaluated by measuring erythrocyte superoxide dismutase, catalase and glutathione peroxidase activities. Plasma nitrite plus nitrate levels and erythrocyte superoxide dismutase activity were higher in the patient group than healthy subjects (p<0.01). In contrast, erythrocyte catalase and glutathione peroxidase activities were lower (p<0.05, p<0.01, respectively). ROI metabolism was altered in relation to hydrogen peroxide elevation in patients with CL. These alterations in ROI enable nitric oxide (NO) to amplify its leishmanicidal effect. The determination of ROI and RNI in patients with CL may be a useful tool to evaluate effector mechanisms of NO and clinical manifestations.

Efectos en el balance de ácidos grasos y el metabolismo lipídico

En edades prematuras el cerdo tiene unos niveles de engrasamiento muy bajos y durante su crecimiento aumenta su contenido en proteína, hueso y masa grasa. Mientras que la deposición proteica viene determinada en gran medida por la capacidad genética, la deposición grasa depende de la ingesta energética.

Construcción de un modelo Multi- Regional Input-Output (MRIO) medioambiental para Cataluña y el resto de España: Estudio del balance en CO2 incorporado en el comercio

El objetivo de este estudio es analizar el impacto, en emisiones de CO2, de la demanda final de Cataluña en relación a los vínculos comerciales interregionales con el resto de España y el resto del mundo. Este proceso implica el análisis del balance en CO2 incorporado para Cataluña, lo que permitirá evaluar la responsabilidad de la economía catalana respecto a estas emisiones. Para este propósito se construye, para esta determinada desagregación regional, un modelo Multi-Regional Input-Output (MRIO) extendido al medioambiente con sectores verticalmente integrados. La incorporación de la técnica de la integración vertical nos permite un enfoque alternativo para el Balance Neto y un análisis más detallado de los vínculos interregionales entre los diversos sectores productivos, centrado en la responsabilidad última de la demanda final de cada sector en cada región. Hasta el momento, los estudios previos sobre los impactos medioambientales incorporados al comercio español se han centrado principalmente en el ámbito nacional. No obstante, por un lado el comercio interregional con el resto de España en términos monetarios representa cerca de la mitad del comercio exterior catalán. Por otro lado, los distintos metabolismos energéticos de ambas economías tienen como consecuencia una importante diferencia en la intensidad de emisión en la producción de bienes y servicios. Esta situación genera para Cataluña un déficit en el Balance Neto estimado con el resto de España, aún teniendo un importante superávit monetario. De esto se desprende la importancia de integrar el nivel interregional en los estudios de los impactos medioambientales incorporados en el comercio y, en consecuencia, en la planificación y formalización de políticas económicas y ambientales a nivel nacional.

Eliminació autotròfica de nitrogen en una pila biològica (microbial fuel cells )

L’aigua i l’energia formen un binomi indissociable. En relació al cicle de l’aigua, des de fa varies dècades s’han desenvolupat diferents formes per recuperar part de l’energia relacionada amb l’aigua, per exemple a partir de centrals hidroelèctriques. No obstant, l’ús d’aquesta aigua també porta associat un gran consum energètic, relacionat sobretot amb el transport, la distribució, la depuració, etc... La depuració d’aigües residuals porta associada una elevada demanda energètica (Obis et al.,2009). En termes energètics, tot i que la despesa elèctrica d’una EDAR varia en funció de diferents paràmetres com la configuració i la capacitat de la planta, la càrrega a tractar, etc... es podria considerar que el rati mig seria d’ aproximadament 0.5 KWh•m-3.Els principals costos d’explotació estan relacionats tant amb la gestió de fangs (28%) com amb el consum elèctric (25%) (50% tractament biològic). Tot i que moltes investigacions relacionades amb el tractament d’aigua residual estan encaminades en disminuir els costos d’operació, des de fa poques dècades s’està investigant la viabilitat de que l’aigua residual fins i tot sigui una font d’energia, canviant la perspectiva, i començant a veure l’aigua residual no com a una problemàtica sinó com a un recurs. Concretament s’estima que l’aigua domèstica conté 9.3 vegades més energia que la necessària per el seu tractament mitjançant processos aerobis (Shizas et al., 2004). Un dels processos més desenvolupats relacionats amb el tractament d’aigües residuals i la producció energètica és la digestió anaeròbia. No obstant, aquesta tecnologia permet el tractament d’altes càrregues de matèria orgànica generant un efluent ric en nitrogen que s’haurà de tractar amb altres tecnologies. Per altre banda, recentment s’està investigant una nova tecnologia relacionada amb el tractament d’aigües residuals i la producció energètica: les piles biològiques (microbial fuel cells, MFC). Aquesta tecnologia permet obtenir directament energia elèctrica a partir de la degradació de substrats biodegradables (Rabaey et al., 2005). Les piles biològiques, més conegudes com a Microbial Fuel Cells (acrònim en anglès, MFC), són una emergent tecnologia que està centrant moltes mirades en el camp de l’ investigació, i que es basa en la producció d’energia elèctrica a partir de substrats biodegradables presents en l’aigua residual (Logan., 2008). Els fonaments de les piles biològiques és molt semblant al funcionament d’una pila Daniell, en la qual es separa en dos compartiments la reacció d’oxidació (compartiment anòdic) i la de reducció (compartiment catòdic) amb l’objectiu de generar un determinat corrent elèctric. En aquest estudi, bàsicament es mostra la posada en marxa d'una pila biològica per a l'eliminació de matèria orgànica i nitrogen de les aigües residuals.