AFM and SPR studies of protein adsorption at solid/liquid interface

Membrane-like structure formed by surfactant molecules of didodecyldimethylammonium bromide (DDAB) on both HOPG and gold electrodes were studied with AFM and SPR techniques. The study shows that the thickness of the adsorbed layer of DDAB is strongly dependent on the concentration of the vesicle solution. We have also investigated the adsorption of redox protein, Cytochrome c, on graphite electrode with in situ tapping mode AFM. The protein adsorbs spontaneously onto the electrode covered with an adsorbed phosphate layer and forms a uniform monolayer. The adsorbed protein exhibits a reversible electron transfer at 0.17 V (Ag/AgCI) once the electrode potential has been increased to 0.75V. Using surface plasmon resonance spectroscopy we have measured subtle conformational change in protein, Cyt c, due to electron transfer of a single electron on MPA-coated gold electrode. The electron transfer induced change in the resonant angle is about 0.006 deg., which corresponds to ~ 0.2 A decreases in the thickness. This is consistent with that reduced state is more compact than the oxidized state.

User Interface Design for Electronic Learning Software: Promoting Usability and Facilitating Learning for Children

Computing devices have become ubiquitous in our technologically-advanced world, serving as vehicles for software applications that provide users with a wide array of functions. Among these applications are electronic learning software, which are increasingly being used to educate and evaluate individuals ranging from grade school students to career professionals. This study will evaluate the design and implementation of user interfaces in these pieces of software. Specifically, it will explore how these interfaces can be developed to facilitate the use of electronic learning software by children. In order to do this, research will be performed in the area of human-computer interaction, focusing on cognitive psychology, user interface design, and software development. This information will be analyzed in order to design a user interface that provides an optimal user experience for children. This group will test said interface, as well as existing applications, in order to measure its usability. The objective of this study is to design a user interface that makes electronic learning software more usable for children, facilitating their learning process and increasing their academic performance. This study will be conducted by using the Adobe Creative Suite to design the user interface and an Integrated Development Environment to implement functionality. These are digital tools that are available on computing devices such as desktop computers, laptops, and smartphones, which will be used for the development of software. By using these tools, I hope to create a user interface for electronic learning software that promotes usability while maintaining functionality. This study will address the increasing complexity of computing software seen today – an issue that has risen due to the progressive implementation of new functionality. This issue is having a detrimental effect on the usability of electronic learning software, increasing the learning curve for targeted users such as children. As we make electronic learning software an integral part of educational programs in our schools, it is important to address this in order to guarantee them a successful learning experience.

User Interface Design for Electronic Learning Software: Promoting Usability and Facilitating Learning for Children

Computing devices have become ubiquitous in our technologically-advanced world, serving as vehicles for software applications that provide users with a wide array of functions. Among these applications are electronic learning software, which are increasingly being used to educate and evaluate individuals ranging from grade school students to career professionals. This study will evaluate the design and implementation of user interfaces in these pieces of software. Specifically, it will explore how these interfaces can be developed to facilitate the use of electronic learning software by children. In order to do this, research will be performed in the area of human-computer interaction, focusing on cognitive psychology, user interface design, and software development. This information will be analyzed in order to design a user interface that provides an optimal user experience for children. This group will test said interface, as well as existing applications, in order to measure its usability. The objective of this study is to design a user interface that makes electronic learning software more usable for children, facilitating their learning process and increasing their academic performance. This study will be conducted by using the Adobe Creative Suite to design the user interface and an Integrated Development Environment to implement functionality. These are digital tools that are available on computing devices such as desktop computers, laptops, and smartphones, which will be used for the development of software. By using these tools, I hope to create a user interface for electronic learning software that promotes usability while maintaining functionality. This study will address the increasing complexity of computing software seen today – an issue that has risen due to the progressive implementation of new functionality. This issue is having a detrimental effect on the usability of electronic learning software, increasing the learning curve for targeted users such as children. As we make electronic learning software an integral part of educational programs in our schools, it is important to address this in order to guarantee them a successful learning experience.

Pau e lata para uma educação musical: uma partitura de vidas

The field of experience and reflection in this dissertation is the Pau and Lata: Artisticpedagogical project and its activities in the field of music education It was created in 1996, by the Community School Sementes da Luz, located on Tabuleiro do Martins district, Maceió / AL. The work extended to the Rio Grande do Norte and later returned to Alagoas, keeping their activities in both states, involving approximately 280 people. The issues that moved us front the experience of Pau e Lata were: What are the main references and theoretical-methodological elements that constitute the formation of the musician in Pau e Lata? How members perceive this project and include themselves in the educational process of music formation? How it works and what is the meaning of the use of instruments and the learning of musical writing and reading? These questions lead us to undertake this dissertation, in order to deepen reflection on the processes of musical training on Pau e Lata, relating the experiences of its members in the process and the theoretical references governing their educational practice. In this sense, we outline the research objectives, which are: describe the Pau e Lata project, focusing on their context of action and their methodological processes; investigate the relationship between the effective participation of its members in the process of composition of the artistic and pedagogical repertoire and its performance in the field of cultural militancy in the environment where it operates. The writing process of this research is based on the phenomenological perspective. Therefore constitute our methodological research path two roads that communicate: 1) the organization and description of historical record of Pau e Lata (supporting documents, certificates, posters, etc.) and memories of the researcher and from other members of the group. 2) the formation of focal groups and writing and sending, via online, testimonials the participants of Pau and Lata relating to issues scrap and onomatopoeia, respectively. Participated in this process 11 components, adding the presence of the researcher, with the age between 21-45 years, all members of Pau e Lata, Core UFRN. The results of this research are focused on the discussion of three axes that describe and guide the work of the Pau e Lata: collective work, the use of the scrap as instrument and the onomatopoeia as base of a methodological process of musical training. This score was composed of three parts. The first part is presented from a collection of references from Pau e Lata, composed of printed and videographic records. The second part refers to the instrument used by Pau e Lata, and the perception of group members on these instruments, which occurs so that they are integrated in the training of the musician.The third axis tells how and what it means learning of music writing and reading, that occurs in two related aspects: the teaching-learning process and the body as a musical element in this process, associated with other actions characterized as studies and theoretical deepening

Interface para tecnologia assistiva baseada em eletrooculografia

We propose in this work, a new method of conceptual organization of areas involving assistive technology, categorizing them in a logical and simple manner; Furthermore, we also propose the implementation of an interface based on electroculography, able to generate high-level commands, to trigger robotic, computer and electromechanical devices. To validate the eye interface, was developed an electronic circuit associated with a computer program that captured the signals generated by eye movements of users, generating high-level commands, able to trigger an active bracing and many other electromechanical systems. The results showed that it was possible to control many electromechanical systems through only eye movements. The interface is presented as a viable way to perform the proposed task and can be improved in the signals analysis in the the digital level. The diagrammatic model developed, presented as a tool easy to use and understand, providing the conceptual organization needs of assistive technology

Análise gráfica de elementos do design na interface de aplicativos de notícias baseados em mobilidade: um estudo do aplicativo Brasil 247

The different characteristics and needs of mobile device users, the situations in which these devices are operated and the limitations and characteristics of these devices are all factors which influence usability and ergonomics; two elements highly required for achieving successful interaction between users and devices. This research aims to identify characteristics of interface design for apps in mobile device applications, focussing on design, visual publishing and content editing, and the actual process of creation of these interfaces, with a view to guarantee quality interaction through touch technology, in observance of service limitations, the opportunities offered by the devices and the application requirements. The study will examine the interface of the mobile device application titled “Brasil 247” which provides news broadcasts using the concept of usability and ergonomics mainly in the field of adaptation, searching and browsing informative articles, as well as clarifying the processes and techniques necessary to carry out interaction tests which seek to evaluate the usability of interface.

Uma interface para o controle de robôs móveis por intermédio de gestos

The main objective of this work was to enable the recognition of human gestures through the development of a computer program. The program created captures the gestures executed by the user through a camera attached to the computer and sends it to the robot command referring to the gesture. They were interpreted in total ve gestures made by human hand. The software (developed in C ++) widely used the computer vision concepts and open source library OpenCV that directly impact the overall e ciency of the control of mobile robots. The computer vision concepts take into account the use of lters to smooth/blur the image noise reduction, color space to better suit the developer's desktop as well as useful information for manipulating digital images. The OpenCV library was essential in creating the project because it was possible to use various functions/procedures for complete control lters, image borders, image area, the geometric center of borders, exchange of color spaces, convex hull and convexity defect, plus all the necessary means for the characterization of imaged features. During the development of the software was the appearance of several problems, as false positives (noise), underperforming the insertion of various lters with sizes oversized masks, as well as problems arising from the choice of color space for processing human skin tones. However, after the development of seven versions of the control software, it was possible to minimize the occurrence of false positives due to a better use of lters combined with a well-dimensioned mask size (tested at run time) all associated with a programming logic that has been perfected over the construction of the seven versions. After all the development is managed software that met the established requirements. After the completion of the control software, it was observed that the overall e ectiveness of the various programs, highlighting in particular the V programs: 84.75 %, with VI: 93.00 % and VII with: 94.67 % showed that the nal program performed well in interpreting gestures, proving that it was possible the mobile robot control through human gestures without the need for external accessories to give it a better mobility and cost savings for maintain such a system. The great merit of the program was to assist capacity in demystifying the man set/machine therefore uses an easy and intuitive interface for control of mobile robots. Another important feature observed is that to control the mobile robot is not necessary to be close to the same, as to control the equipment is necessary to receive only the address that the Robotino passes to the program via network or Wi-Fi.

Eyetracking: analisi della user interface di una pagina web

Negli ultimi vent'anni con lo sviluppo di Internet, il modo di comunicare tra le persone �è totalmente cambiato. Grazie a Internet si sono ridotte le distanze e soprattutto tramite i siti web le aziende hanno una propria vetrina sul mondo sempre accessibile. Tutto ci�ò ha portato a nuovi comportamenti da parte dei consumatori che divengono sempre pi�u esigenti nella vastità di informazioni presenti sul Web. Perciò è necessario che le web companies riescano a produrre website efficienti e usabili per favorire l'interazione con l'utente. Inoltre il web ha avuto una rapida espansione per quanto concerne le metodologie di sviluppo e analisi del comportamento del consumatore. Si cercano sempre nuovi spunti per poter acquisire quello che �è il percorso di un utente affinché porti a termine una determinata azione nel proprio dominio. Per questo motivo, oltre agli strumenti gi�à consolidati come il riempimento di questionari o il tracking per mezzo di piattaforme come Google Analytics, si �è pensato di andare oltre e cercare di analizzare ancora pi�u a fondo il "consumAttore". Grazie ad un eye-tracker �è possibile riconoscere quelli che sono i modelli cognitivi che riguardano il percorso di ricerca, valutazione e acquisto di un prodotto o una call to action, e come i contenuti di una web application influenzano l'attenzione e la user experience. Pertanto l'obiettivo che si pone questo studio �è quello di poter misurare l'engagement della navigazione utente di una web application e, nel caso fosse necessario, ottimizzare i contenuti al suo interno. Per il rilevamento delle informazioni necessarie durante l'esperimento, mi sono servito di uno strumento a supporto delle decisioni, ovvero un eye-tracker e della successiva somministrazione di questionari.

Musical commonplace book : manuscript, [approximately 1790-approximately 1810]

Contains songs, partly from English operas, and instrumental music.

High accuracy mobile robot positioning using an external large volume metrology instrument

A method of accurately controlling the position of a mobile robot using an external Large Volume Metrology (LVM) instrument is presented in this paper. Utilizing a LVM instrument such as the laser tracker in mobile robot navigation, many of the most difficult problems in mobile robot navigation can be simplified or avoided. Using the real- Time position information from the laser tracker, a very simple navigation algorithm, and a low cost robot, 5mm repeatability was achieved over a volume of 30m radius. A surface digitization scan of a wind turbine blade section was also demonstrated, illustrating possible applications of the method for manufacturing processes. © Springer-Verlag Berlin Heidelberg 2010.

Large volume metrology instrument selection and measurability analysis

Metrology processes used in the manufacture of large products include tool setting, product verification and flexible metrology enabled automation. The range of applications and instruments available makes the selection of the appropriate instrument for a given task highly complex. Since metrology is a key manufacturing process it should be considered in the early stages of design. This paper provides an overview of the important selection criteria for typical measurement processes and presents some novel selection strategies. Metrics which can be used to assess measurability are also discussed. A prototype instrument selection and measurability analysis application is presented with discussion of how this can be used as the basis for development of a more sophisticated measurement planning tool. © Springer-Verlag Berlin Heidelberg 2010.

Into the Bends of Time and Musical Forces in Jazz: Group Interaction and Double-time in “My Foolish Heart” as performed by the Bill Evans Trio with Scott LaFaro and Paul Motian.

Into the Bends of Time is a 40-minute work in seven movements for a large chamber orchestra with electronics, utilizing real-time computer-assisted processing of music performed by live musicians. The piece explores various combinations of interactive relationships between players and electronics, ranging from relatively basic processing effects to musical gestures achieved through stages of computer analysis, in which resulting sounds are crafted according to parameters of the incoming musical material. Additionally, some elements of interaction are multi-dimensional, in that they rely on the participation of two or more performers fulfilling distinct roles in the interactive process with the computer in order to generate musical material. Through processes of controlled randomness, several electronic effects induce elements of chance into their realization so that no two performances of this work are exactly alike. The piece gets its name from the notion that real-time computer-assisted processing, in which sound pressure waves are transduced into electrical energy, converted to digital data, artfully modified, converted back into electrical energy and transduced into sound waves, represents a “bending” of time.

The Bill Evans Trio featuring bassist Scott LaFaro and drummer Paul Motian is widely regarded as one of the most important and influential piano trios in the history of jazz, lauded for its unparalleled level of group interaction. Most analyses of Bill Evans’ recordings, however, focus on his playing alone and fail to take group interaction into account. This paper examines one performance in particular, of Victor Young’s “My Foolish Heart” as recorded in a live performance by the Bill Evans Trio in 1961. In Part One, I discuss Steve Larson’s theory of musical forces (expanded by Robert S. Hatten) and its applicability to jazz performance. I examine other recordings of ballads by this same trio in order to draw observations about normative ballad performance practice. I discuss meter and phrase structure and show how the relationship between the two is fixed in a formal structure of repeated choruses. I then develop a model of perpetual motion based on the musical forces inherent in this structure. In Part Two, I offer a full transcription and close analysis of “My Foolish Heart,” showing how elements of group interaction work with and against the musical forces inherent in the model of perpetual motion to achieve an unconventional, dynamic use of double-time. I explore the concept of a unified agential persona and discuss its role in imparting the song’s inherent rhetorical tension to the instrumental musical discourse.

A Novel Method for Rapid and Selective Extraction of Male DNA from Rape Kits using Alkaline Lysis and Pressure Cycling Technology (PCT)

There is an increasing demand for DNA analysis because of the sensitivity of the method and the ability to uniquely identify and distinguish individuals with a high degree of certainty. But this demand has led to huge backlogs in evidence lockers since the current DNA extraction protocols require long processing time. The DNA analysis procedure becomes more complicated when analyzing sexual assault casework samples where the evidence contains more than one contributor. Additional processing to separate different cell types in order to simplify the final data interpretation further contributes to the existing cumbersome protocols. The goal of the present project is to develop a rapid and efficient extraction method that permits selective digestion of mixtures. Selective recovery of male DNA was achieved with as little as 15 minutes lysis time upon exposure to high pressure under alkaline conditions. Pressure cycling technology (PCT) is carried out in a barocycler that has a small footprint and is semi-automated. Typically less than 10% male DNA is recovered using the standard extraction protocol for rape kits, almost seven times more male DNA was recovered from swabs using this novel method. Various parameters including instrument setting and buffer composition were optimized to achieve selective recovery of sperm DNA. Some developmental validation studies were also done to determine the efficiency of this method in processing samples exposed to various conditions that can affect the quality of the extraction and the final DNA profile. Easy to use interface, minimal manual interference and the ability to achieve high yields with simple reagents in a relatively short time make this an ideal method for potential application in analyzing sexual assault samples.

Design and Implementation of Tools for STM Studies in UHV and at the Solid-Liquid Interface

This thesis presents details of the design and development of novel tools and instruments for scanning tunneling microscopy (STM), and may be considered as a repository for several years' worth of development work. The author presents design goals and implementations for two microscopes. First, a novel Pan-type STM was built that could be operated in an ambient environment as a liquid-phase STM. Unique features of this microscope include a unibody frame, for increased microscope rigidity, a novel slider component with large Z-range, a unique wiring scheme and damping mechanism, and a removable liquid cell. The microscope exhibits a high level of mechanical isolation at the tunnel junction, and operates excellently as an ambient tool. Experiments in liquid are on-going. Simultaneously, the author worked on designs for a novel low temperature, ultra-high vacuum (LT-UHV) instrument, and these are presented as well. A novel stick-slip vertical coarse approach motor was designed and built. To gauge the performance of the motor, an in situ motion sensing apparatus was implemented, which could measure the step size of the motor to high precision. A new driving circuit for stick-slip inertial motors is also presented, that o ffers improved performance over our previous driving circuit, at a fraction of the cost. The circuit was shown to increase step size performance by 25%. Finally, a horizontal sample stage was implemented in this microscope. The build of this UHV instrument is currently being fi nalized. In conjunction with the above design projects, the author was involved in a collaborative project characterizing N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) on Au(111) films. STM was used to characterize Au substrate quality, for both commercial substrates and those manufactured via a unique atomic layer deposition (ALD) process by collaborators. Ambient and UHV STM was then also used to characterize the NHC/Au(111) films themselves, and several key properties of these films are discussed. During this study, the author discovered an unexpected surface contaminant, and details of this are also presented. Finally, two models are presented for the nature of the NHC-Au(111) surface interaction based on the observed film properties, and some preliminary theoretical work by collaborators is presented.

How to map the diversity of the audiovisual industry in the digital era. A Methodological Proposition

This article presents a methodological proposition to map the diversity of the audiovisual industry in the digital scenario by portraying the most important interactions between those who create, produce, distribute and disseminate audiovisual productions on line, paying special attention to powerful intermediaries and to small and medium independent agents. Taking as a point of departure a flexible understanding of social network analysis, the aim is to understand the structure of the audiovisual industry on the internet so that, taking into consideration a given sector, agents, their relations and the networks they give place to – as well as the structural conditions under which they operate – are studied. The aim is to answer questions such as: what is mapping, what is of interesting to map, how can it be done and what advantages and disadvantages the results will present.