Cartografías de la Mina: Taller sobre espacio público con profesionales y vecinos del barrio

Plataforma d'Entitats i Veïns/es del barri de La Mina / Consorci de La Mina

Tire traces: discrimination and classification of pyrolysis-GC/MS profiles

Tire traces can be observed on several crime scenes as vehicles are often used by criminals. The tread abrasion on the road, while braking or skidding, leads to the production of small rubber particles which can be collected for comparison purposes. This research focused on the statistical comparison of Py-GC/MS profiles of tire traces and tire treads. The optimisation of the analytical method was carried out using experimental designs. The aim was to determine the best pyrolysis parameters regarding the repeatability of the results. Thus, the pyrolysis factor effect could also be calculated. The pyrolysis temperature was found to be five time more important than time. Finally, a pyrolysis at 650 °C during 15 s was selected. Ten tires of different manufacturers and models were used for this study. Several samples were collected on each tire, and several replicates were carried out to study the variability within each tire (intravariability). More than eighty compounds were integrated for each analysis and the variability study showed that more than 75% presented a relative standard deviation (RSD) below 5% for the ten tires, thus supporting a low intravariability. The variability between the ten tires (intervariability) presented higher values and the ten most variant compounds had a RSD value above 13%, supporting their high potential of discrimination between the tires tested. Principal Component Analysis (PCA) was able to fully discriminate the ten tires with the help of the first three principal components. The ten tires were finally used to perform braking tests on a racetrack with a vehicle equipped with an anti-lock braking system. The resulting tire traces were adequately collected using sheets of white gelatine. As for tires, the intravariability for the traces was found to be lower than the intervariability. Clustering methods were carried out and the Ward's method based on the squared Euclidean distance was able to correctly group all of the tire traces replicates in the same cluster than the replicates of their corresponding tire. Blind tests on traces were performed and were correctly assigned to their tire source. These results support the hypothesis that the tested tires, of different manufacturers and models, can be discriminated by a statistical comparison of their chemical profiles. The traces were found to be not differentiable from their source but differentiable from all the other tires present in the subset. The results are promising and will be extended on a larger sample set.

Interrogants sobre l'espai públic de La Mina

Plataforma d'entitats i veïns del barri de La Mina

Cartografies de La Mina. Compilació dels resultats dels tallers de participació ciutadana sobre espai públic 2002-2006

Plataforma d'entitats i veïns/es del barri de La Mina

Projecte Rambla de la Mina. Colors per trepitjar

Aquest projecte deriva d'alguns dels resultats del conjunt de tallers de participació que, amb el nom de Cartografies de La Mina vàrem desenvolupar entre el 2002 i el 2005 amb diversos grups de veïns i veïnes del barri i que queden sintetitzats en el Pla d¿accions de barri en Espai Públic, que vàrem lliurar al Consorci del Barri de La Mina l'abril del 2006.

La Mina. Pla d'Accions de Barri en Espai Públic

Este documento desarrolla el conjunto de planteamientos abordados en el proceso de participación ciudadana: Cartografies de La Mina 2002-2006. http://www.ub.edu/escult/mina

Identificació de les competències més valorades en l'entorn professional i adequació del pla d'estudis de grau en enginyeria informàtica

L'execució d'aquest projecte ha volgut reflectir quines són les capacitats professionals més valorades actualment, poder entendre quines són les condicions actuals i reflexionar sobre quina és la cobertura que els plans educatius actuals -en l'àmbit de l'enginyeria informàtica- brinden a aquesta evolució, contribuint amb aquest estudi a l'objectiu general de l'àrea de competències professionals d'apropar el món acadèmic al laboral.

¿Y después del trabajo, qué? Más allá de la integración laboral de las personas con discapacidad = What happens after work? Going further than labour integration for disabled people

La actividad profesional es fundamental en la vida de cualquier persona y en el caso de las que padecen una discapacidad tiene una gran importancia para contribuir a configurar su identidad adulta. En este sentido, la finalidad del artículo es valorar la importancia del trabajo en los procesos de participación social y de calidad de vida de las personas con discapacidad. Por ello, en el artículo se pone de manifiesto la relación que se establece entre la dimensión laboral y la integración social de los individuos con discapacidad mediante el análisis de investigaciones desarrolladas en nuestro contexto, entre las que figuran diversos estudios realizados por nuestro grupo de investigación durante los últimos años. Con la voluntad de conocer con más detalle esta cuestión, se presenta una investigación reciente realizada por nuestro equipo. En ella desarrollamos un estudio de casos centrado en personas con discapacidad psíquica que han participado en experiencias de integración laboral en el mercado ordinario, con el objetivo de obtener información sobre la incidencia de la inserción laboral en diferentes dimensiones de la vida de los trabajadores con discapacidad. Los resultados nos permiten valorar que la experiencia genera cambios positivos, sobre todo a nivel personal (expectativas personales, potenciación del proyecto de vida, mejora de competencias…). Sin embargo, a pesar de que se aprecian mejoras en la dimensión social, el estudio plantea la necesidad de emprender acciones alternativas para potenciar la participación comunitaria de las personas implicadas en la investigación. El artículo concluye con algunas propuestas orientadas a mejorar los procesos de inserción social del colectivo

Optimization of HS-SPME/GC-MS analysis and its use in the profiling of illicit ecstasy tablets (Part 1)

A headspace solid-phase microextraction procedure (HS-SPME) was developed for the profiling of traces present in 3,4-methylenedioxymethylampethamine (MDMA). Traces were first extracted using HS-SPME and then analyzed by gas chromatography-mass spectroscopy (GC-MS). The HS-SPME conditions were optimized using varying conditions. Optimal results were obtained when 40 mg of crushed MDMA sample was heated at 80 °C for 15 min, followed by extraction at 80 °C for 15 min with a polydimethylsiloxane/divinylbenzene coated fibre. A total of 31 compounds were identified as traces related to MDMA synthesis, namely precursors, intermediates or by-products. In addition some fatty acids used as tabletting materials and caffeine used as adulterant, were also detected. The use of a restricted set of 10 target compounds was also proposed for developing a screening tool for clustering samples having close profile. 114 seizures were analyzed using an SPME auto-sampler (MultiPurpose Samples MPS2), purchased from Gerstel GMBH & Co. (Germany), and coupled to GC-MS. The data was handled using various pre-treatment methods, followed by the study of similarities between sample pairs based on the Pearson correlation. The results show that HS-SPME, coupled with the suitable statistical method is a powerful tool for distinguishing specimens coming from the same seizure and specimens coming from different seizures. This information can be used by law enforcement personnel to visualize the ecstasy distribution network as well as the clandestine tablet manufacturing.

On-line desorption of dried blood spot: A novel approach for the direct LC/MS analysis of micro-whole blood samples.

The aim of this work is to present a new concept, called on-line desorption of dried blood spots (on-line DBS), allowing the direct analysis of a dried blood spot coupled to liquid chromatography mass spectrometry device (LC/MS). The system is based on an inox cell which can receive a blood sample (10 microL) previously spotted on a filter paper. The cell is then integrated into LC/MS system where the analytes are desorbed out of the paper towards a column switching system ensuring the purification and separation of the compounds before their detection on a single quadrupole MS coupled to atmospheric pressure chemical ionisation (APCI) source. The described procedure implies that no pretreatment is necessary in spite the analysis is based on whole blood sample. To ensure the applicability of the concept, saquinavir, imipramine, and verapamil were chosen. Despite the use of a small sampling volume and a single quadrupole detector, on-line DBS allowed the analyses of these three compounds over their therapeutic concentrations from 50 to 500 ng/mL for imipramine and verapamil and from 100 to 1000 ng/mL for saquinavir. Moreover, the method showed good repeatability with relative standard deviation (RSD) lower than 15% based on two levels of concentration (low and high). Function responses were found to be linear over the therapeutic concentration for each compound and were used to determine the concentrations of real patient samples for saquinavir. Comparison of the founded values with those of a validated method used routinely in a reference laboratory showed a good correlation between the two methods. Moreover, good selectivity was observed ensuring that no endogenous or chemical components interfered with the quantitation of the analytes. This work demonstrates the feasibility and applicability of the on-line DBS procedure for bioanalysis.