Modelagem IEEE 1815 DNP3 em VHDL e análise de comunicação SG via IEEE 802.15.4 e IEEE 802.11

Pós-graduação em Engenharia Elétrica - FEIS

Comparação da razão carga/deflexão entre fios ortodônticos de Ni-Ti termoativados 0,014”x0,025” e 0,016”x0,022”

The knowledge of the mechanical properties of nickel-titanium (NiTi) termoactives of the more accessible of the domestic market is still limited. Given this, the objective of this study was to evaluate and compare through deflection tests in brackets NiTi wires 03 term rectangular gauge 0.014 '' enabled x 0.025 '' and 0.016 '' x 0.022 '' of different brands (MORELLI (R), ORMCO (R) ORTHOSOURCE (R), ORTHOMETRIC (R), EURODONTO (R) and ADITEK (R)). All tests were carried out on universal testing machine EMIC DL 2000 under identical conditions and controlled at a temperature of 36 degrees C +/- 0.5 degrees C. Five measurements (N= 5) were performed for each thickness/wire tag that was deflected up to a limit of 4.0mm at a speed of 1.0mm/min. Each 0.2mm (round trip) of corresponding strength measured deflection for the construction of the graph of force x deflection at Tesc program version 3.04. Each graphic was evaluated according to the following variables: beginning of the Martensitic transformation (cN and mm), maximum strength (cN), the beginning and end of the plateau of deactivation (cN and mm) and length (mm) plateau. The average and standard deviation were calculated for all variables and statistical analysis was made by ANOVA tests 2 criteria and Turkey or Kruskal-Wallis and Dunn, a 5% level of significance. The results showed that the tests of 0.014 '' x0.025 '' ORTHOMETRIC (R) brands and ORMCO (R) showed the best results, as well as the wires of the MORELLI (R) and ORTHOSOURCE (R) to wires 0.016 '' x0.022 ''. In General, the gauge wires 0.014 '' x0.025 '' showed strength levels on the plateau of deactivation to 6 x smaller than 0.016 '' x0.022 '' caliber.

Resistência mecânica à penetração em latossolo vermelho após sucessivos cortes mecanizas de cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Estudo de sensores PZT aplicados à detecção de danos em tubulações

Pós-graduação em Engenharia Elétrica - FEIS

Análise tridimensional das alterações dento-alveolares em molares superiores após o uso do aparelho de Herbst

Pós-graduação em Ciências Odontológicas - FOAR

Evaluation of hearing protection used by police officers in the shooting range

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Correlação entre condição da superfície do solo agrícola e o coeficiente de absorção acústica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O clima urbano como indicador de qualidade ambiental: estudo de caso da paisagem urbana de Araçatuba/SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diagnóstico de distúrbios de tensão em sistemas de distribuição de energia elétrica usando um algoritmo imuno-neural

Pós-graduação em Engenharia Elétrica - FEIS

Mapeamento energético de um edifício corporativo

Increasingly the business for large companies tend to sustainable actions. Such actions may have motivated social, environmental and economical too. Thus, the study of small actions or investments aimed at improving a product or a process may impact on financial return and even the exposure of a sustainable paper company, a fact that is increasingly wel l regarded in the market. This study presents proposals raised in the market and in the literature showing the cost of each investment, the payback over time and the benefits of each project to be implemented in a corporative building located in the city of São Paulo. It was analyzed the energy consumption, determining the amount of consumption of each device through measurement of some parameters such as voltage and operating current, and lifting nominal values supplied by the manufacturers. By understanding the conditions of each equipment and the processes involved, were raised possible energy improvements, focusing on the cooling system of the building, the tariff system and the installation of an energy management system

Ensaios não destrutivos: metrologia e calibração

To perform the quality control of various industries like: petrochemical, nuclear, aerospace, steel, shipbuilding, pulp and paper, and inspection of welded products, castings, forgings, rolled products, among others, used the method of Non-Destructive Testing (NDT). The method is based on the physical properties of the material, so selecting a procedure more appropriate. The company Inter-Metro Serviços Especiais Ltda., with its cutting-edge laboratory, dedicated to the implementation of calibration services and measurement equipment for industrial, medical, occupational safety and Non-Destructive Testing (NDT). It has a trained team, providing guidance and providing support for improving procedures for testing and measuring

Concepção e simulação de uma chaminé solar

The present work intends to study some fluid dynamic and heat transfer aspects of a solar chimney, aiming at a preliminary design of a facility. Some definitions and concepts of this system are presented. The simulation was performed based on a theoretical model validated with measurements of a prototype in Manzanares, Spain. Using the same theoretical model and some considerations, dimensions on a small scale are applied, making the model more interesting from its constructive aspect. The results show the behavior of the air velocity inside the chimney and illustrate some values of two preselected turbines. This technology looks promising in Brazilian territory due to high levels of solar radiation

Os ventos e seus impactos na área urbana de Rio Claro (SP) entre 2005 e 2010: um análise através dos jornais e dos boletins de ocorrência

The intensive development in the urbanization process implied a series of economic, social, and gradually, environmental transformations, essentially, since its intensification, which took place from the Industrial Revolution in Europe and North America. In Latin American countries, including Brazil, there was such acceleration in urban sprawl, only in the middle of the twentieth century, fomented by a peculiar industrialization, coming from the scientific-technical revolution, which occurred in developing countries. In this context, and with a lack of planning and an effective organization, cities of the dependent countries face an inordinate population growth and an unprecedented industrial swelling. Brazil, following this trend, presents several issues regarding the gaps in the provision of necessary infrastructure to meet the most basic needs of its population and the intense activity and anthropogenic effects on the environment. In this sense, environmental problems, related to air and water pollution, degradation and contamination of soil, paving roads, reduction of green areas, urban heat island, among others, reaching ever deeper into the Brazilian urban areas. It is important the analysis in this final project, the weather events related to episodes of strong winds and the events and the impacts to the population of Rio Claro (SP) in the period 2005 to 2010, basing themselves in Geographical Climatology and Urban climate studies. In this scenario, we found the prevalence of occurrences linked to falling trees in the study area, connected, at the same time, to the occurrence and to the absence of episodes of extreme events, with measurements of strong winds, showing a connection between the events and external facts to episodes of winds

Analise do sistema de medição em peças aeronaúticas através do estudo de R&R (repetibilidade e reprodutibilidade)

The Measurement System Analysis (MSA - Measurement System Analysis) is a statistical methodology developed to study and analyze the behavior of the measurement systems, and, therefore, allow the increased of the confidence readings performed by measuring instruments. It’s widely used in the automotive industry since the 90’s and is a mandatory requirement for the approval of the parts according to ISO Standard of the automotive sector. However, the aerospace industry doesn’t require this type of Study, once which the vast majority of aeronautics parts have characteristics (dimensions) with very tight tolerances, closed, ie, at the home of microns. This work aims to create lists of recommendations for definitions of measuring instruments in developing of control plans, which correlates tolerances fields of characteristics for different settings and acceptance of the instrument, classified as optimum, recommended and not recommended, through of the study of R&R (Repeatability and Reproducibility) in aeronautics parts. Every methodology of the experimental part was based on modern strategy of continuous improvement, the DMAIC (Define Measure Analyze Implant Control), in order to achieve better measurement method used in the control of milling aeronautics parts, identifying and reducing the variations of the measurement process. The results of the R&R Study in large part of measuring instrument manuals were considered acceptable and/or recommended, ie with values of %P/T and %RR lower than 30%, providing statistical data which have enabled the elaboration of tables of recommendations, which, from this work, have turned into very important documents and aid for Process Engineering, having in their hands a technical study able to identify which is the most appropriate instrument to get a more robust dimensional... (Complete abstract click electronic access below)

Water mass reconstruction by Nd isotopic analysis from Mid Atlantic oceanic sediments

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)