Numerical modelling of spectral, temporal and statistical properties of Raman fiber lasers

Efficient numerical modelling of the power, spectral and statistical properties of partially coherent quasi-CW Raman fiber laser radiation is presented. XPM between pump wave and generated Stokes wave is not important in the generation spectrum broadening and XPM term can be omitted in propagation equation what sufficiently speeds-up simulations. The time dynamics of Raman fiber laser (RFL) is stochastic exhibiting events several times more intense that the mean value on the ps timescale. However, the RFL has different statistical properties on different time scales. The probability density function of spectral power density is exponential for the generation modes located either in the spectrum centre or spectral wings while the phases are distributed uniformly. The pump wave preserves the initial Gaussian statistics during propagation in the laser cavity. Intense pulses in the pump wave are evolved under the SPM influence and are not disturbed by the dispersion. Contrarily, in the generated wave the dispersion plays a significant role that results in stochastic behavior. © 2012 Elsevier B.V. All rights reserved.

Thermal effects on the photoelastic coefficient of polymer optical fibers

We measure the radial profile of the photoelastic coefficient C(r) in single-mode polymer optical fibers (POFs), and we determine the evolution of C(r) after annealing the fibers at temperatures from 40°C to 80°C. We demonstrate that C(r) in the fibers drawn from a preform without specific thermal pre-treatment changes and converges to values between 1.2 and 1.6×10-12 Pa-1 following annealing at 80°C. The annealed fibers display a smoothened radial profile of C(r) and a lowered residual birefringence. In contrast, the mean value of C(r) of the fiber drawn from a preform that has been pre-annealed remains constant after our annealing process and is significantly higher, i.e., 4×10-12 Pa-1. The annealing process decreases the residual birefringence to a lower extent as well. These measurements indicate the impact of annealing on the thermal stability of the photoelastic coefficient of POFs, which is an essential characteristic in view of developing POF-based thermomechanical sensors.

Lateral load distribution for curved steel I -girder bridges

Lateral load distribution factor is a key factor for designing and analyzing curved steel I-girder bridges. In this dissertation, the effects of various parameters on moment and shear distribution for curved steel I-girder bridges were studied using the Finite Element Method (FEM). The parameters considered in the study were: radius of curvature, girder spacing, overhang, span length, number of girders, ratio of girder stiffness to overall bridge stiffness, slab thickness, girder longitudinal stiffness, cross frame spacing, and girder torsional inertia. The variations of these parameters were based on the statistical analysis of the real bridge database, which was created by extracting data from existing or newly designed curved steel I-girder bridge plans collected all over the nation. A hypothetical bridge superstructure model that was made of all the mean values of the data was created and used for the parameter study. ^ The study showed that cross frame spacing and girder torsional inertia had negligible effects. Other parameters had been identified as key parameters. Regression analysis was conducted based on the FEM analysis results and simplified formulas for predicting positive moment, negative moment, and shear distribution factors were developed. Thirty-three real bridges were analyzed using FEM to verify the formulas. The ratio of the distribution factor obtained from the formula to the one obtained from the FEM analysis, which was referred to as the g-ratio, was examined. The results showed that the standard deviation of the g-ratios was within 0.04 to 0.06 and the mean value of the g-ratios was greater than unity by one standard deviation. This indicates that the formulas are conservative in most cases but not overly conservative. The final formulas are similar in format to the current American Association of State Highway and Transportation Officials (AASHTO) Load Resistance and Factor Design (LRFD) specifications. ^ The developed formulas were compared with other simplified methods. The outcomes showed that the proposed formulas had the most accurate results among all methods. ^ The formulas developed in this study will assist bridge engineers and researchers in predicting the actual live load distribution in horizontally curved steel I-girder bridges. ^

Radiotherapy Treatment Assessment using DCE-MRI

Abstract

The goal of modern radiotherapy is to precisely deliver a prescribed radiation dose to delineated target volumes that contain a significant amount of tumor cells while sparing the surrounding healthy tissues/organs. Precise delineation of treatment and avoidance volumes is the key for the precision radiation therapy. In recent years, considerable clinical and research efforts have been devoted to integrate MRI into radiotherapy workflow motivated by the superior soft tissue contrast and functional imaging possibility. Dynamic contrast-enhanced MRI (DCE-MRI) is a noninvasive technique that measures properties of tissue microvasculature. Its sensitivity to radiation-induced vascular pharmacokinetic (PK) changes has been preliminary demonstrated. In spite of its great potential, two major challenges have limited DCE-MRI’s clinical application in radiotherapy assessment: the technical limitations of accurate DCE-MRI imaging implementation and the need of novel DCE-MRI data analysis methods for richer functional heterogeneity information.

This study aims at improving current DCE-MRI techniques and developing new DCE-MRI analysis methods for particular radiotherapy assessment. Thus, the study is naturally divided into two parts. The first part focuses on DCE-MRI temporal resolution as one of the key DCE-MRI technical factors, and some improvements regarding DCE-MRI temporal resolution are proposed; the second part explores the potential value of image heterogeneity analysis and multiple PK model combination for therapeutic response assessment, and several novel DCE-MRI data analysis methods are developed.

I. Improvement of DCE-MRI temporal resolution. First, the feasibility of improving DCE-MRI temporal resolution via image undersampling was studied. Specifically, a novel MR image iterative reconstruction algorithm was studied for DCE-MRI reconstruction. This algorithm was built on the recently developed compress sensing (CS) theory. By utilizing a limited k-space acquisition with shorter imaging time, images can be reconstructed in an iterative fashion under the regularization of a newly proposed total generalized variation (TGV) penalty term. In the retrospective study of brain radiosurgery patient DCE-MRI scans under IRB-approval, the clinically obtained image data was selected as reference data, and the simulated accelerated k-space acquisition was generated via undersampling the reference image full k-space with designed sampling grids. Two undersampling strategies were proposed: 1) a radial multi-ray grid with a special angular distribution was adopted to sample each slice of the full k-space; 2) a Cartesian random sampling grid series with spatiotemporal constraints from adjacent frames was adopted to sample the dynamic k-space series at a slice location. Two sets of PK parameters’ maps were generated from the undersampled data and from the fully-sampled data, respectively. Multiple quantitative measurements and statistical studies were performed to evaluate the accuracy of PK maps generated from the undersampled data in reference to the PK maps generated from the fully-sampled data. Results showed that at a simulated acceleration factor of four, PK maps could be faithfully calculated from the DCE images that were reconstructed using undersampled data, and no statistically significant differences were found between the regional PK mean values from undersampled and fully-sampled data sets. DCE-MRI acceleration using the investigated image reconstruction method has been suggested as feasible and promising.

Second, for high temporal resolution DCE-MRI, a new PK model fitting method was developed to solve PK parameters for better calculation accuracy and efficiency. This method is based on a derivative-based deformation of the commonly used Tofts PK model, which is presented as an integrative expression. This method also includes an advanced Kolmogorov-Zurbenko (KZ) filter to remove the potential noise effect in data and solve the PK parameter as a linear problem in matrix format. In the computer simulation study, PK parameters representing typical intracranial values were selected as references to simulated DCE-MRI data for different temporal resolution and different data noise level. Results showed that at both high temporal resolutions (<1s) and clinically feasible temporal resolution (~5s), this new method was able to calculate PK parameters more accurate than the current calculation methods at clinically relevant noise levels; at high temporal resolutions, the calculation efficiency of this new method was superior to current methods in an order of 102. In a retrospective of clinical brain DCE-MRI scans, the PK maps derived from the proposed method were comparable with the results from current methods. Based on these results, it can be concluded that this new method can be used for accurate and efficient PK model fitting for high temporal resolution DCE-MRI.

II. Development of DCE-MRI analysis methods for therapeutic response assessment. This part aims at methodology developments in two approaches. The first one is to develop model-free analysis method for DCE-MRI functional heterogeneity evaluation. This approach is inspired by the rationale that radiotherapy-induced functional change could be heterogeneous across the treatment area. The first effort was spent on a translational investigation of classic fractal dimension theory for DCE-MRI therapeutic response assessment. In a small-animal anti-angiogenesis drug therapy experiment, the randomly assigned treatment/control groups received multiple fraction treatments with one pre-treatment and multiple post-treatment high spatiotemporal DCE-MRI scans. In the post-treatment scan two weeks after the start, the investigated Rényi dimensions of the classic PK rate constant map demonstrated significant differences between the treatment and the control groups; when Rényi dimensions were adopted for treatment/control group classification, the achieved accuracy was higher than the accuracy from using conventional PK parameter statistics. Following this pilot work, two novel texture analysis methods were proposed. First, a new technique called Gray Level Local Power Matrix (GLLPM) was developed. It intends to solve the lack of temporal information and poor calculation efficiency of the commonly used Gray Level Co-Occurrence Matrix (GLCOM) techniques. In the same small animal experiment, the dynamic curves of Haralick texture features derived from the GLLPM had an overall better performance than the corresponding curves derived from current GLCOM techniques in treatment/control separation and classification. The second developed method is dynamic Fractal Signature Dissimilarity (FSD) analysis. Inspired by the classic fractal dimension theory, this method measures the dynamics of tumor heterogeneity during the contrast agent uptake in a quantitative fashion on DCE images. In the small animal experiment mentioned before, the selected parameters from dynamic FSD analysis showed significant differences between treatment/control groups as early as after 1 treatment fraction; in contrast, metrics from conventional PK analysis showed significant differences only after 3 treatment fractions. When using dynamic FSD parameters, the treatment/control group classification after 1st treatment fraction was improved than using conventional PK statistics. These results suggest the promising application of this novel method for capturing early therapeutic response.

The second approach of developing novel DCE-MRI methods is to combine PK information from multiple PK models. Currently, the classic Tofts model or its alternative version has been widely adopted for DCE-MRI analysis as a gold-standard approach for therapeutic response assessment. Previously, a shutter-speed (SS) model was proposed to incorporate transcytolemmal water exchange effect into contrast agent concentration quantification. In spite of richer biological assumption, its application in therapeutic response assessment is limited. It might be intriguing to combine the information from the SS model and from the classic Tofts model to explore potential new biological information for treatment assessment. The feasibility of this idea was investigated in the same small animal experiment. The SS model was compared against the Tofts model for therapeutic response assessment using PK parameter regional mean value comparison. Based on the modeled transcytolemmal water exchange rate, a biological subvolume was proposed and was automatically identified using histogram analysis. Within the biological subvolume, the PK rate constant derived from the SS model were proved to be superior to the one from Tofts model in treatment/control separation and classification. Furthermore, novel biomarkers were designed to integrate PK rate constants from these two models. When being evaluated in the biological subvolume, this biomarker was able to reflect significant treatment/control difference in both post-treatment evaluation. These results confirm the potential value of SS model as well as its combination with Tofts model for therapeutic response assessment.

In summary, this study addressed two problems of DCE-MRI application in radiotherapy assessment. In the first part, a method of accelerating DCE-MRI acquisition for better temporal resolution was investigated, and a novel PK model fitting algorithm was proposed for high temporal resolution DCE-MRI. In the second part, two model-free texture analysis methods and a multiple-model analysis method were developed for DCE-MRI therapeutic response assessment. The presented works could benefit the future DCE-MRI routine clinical application in radiotherapy assessment.

A stereo-image analysis JAVA software with links to executable and source code

Scientists planning to use underwater stereoscopic image technologies are often faced with numerous problems during the methodological implementations: commercial equipment is too expensive; the setup or calibration is too complex; or the imaging processing (i.e. measuring objects in the stereo-images) is too complicated to be performed without a time-consuming phase of training and evaluation. The present paper addresses some of these problems and describes a workflow for stereoscopic measurements for marine biologists. It also provides instructions on how to assemble an underwater stereo-photographic system with two digital consumer cameras and gives step-by-step guidelines for setting up the hardware. The second part details a software procedure to correct stereo-image pairs for lens distortions, which is especially important when using cameras with non-calibrated optical units. The final part presents a guide to the process of measuring the lengths (or distances) of objects in stereoscopic image pairs. To reveal the applicability and the restrictions of the described systems and to test the effects of different types of camera (a compact camera and an SLR type), experiments were performed to determine the precision and accuracy of two generic stereo-imaging units: a diver-operated system based on two Olympus Mju 1030SW compact cameras and a cable-connected observatory system based on two Canon 1100D SLR cameras. In the simplest setup without any correction for lens distortion, the low-budget Olympus Mju 1030SW system achieved mean accuracy errors (percentage deviation of a measurement from the object's real size) between 10.2 and -7.6% (overall mean value: -0.6%), depending on the size, orientation and distance of the measured object from the camera. With the single lens reflex (SLR) system, very similar values between 10.1% and -3.4% (overall mean value: -1.2%) were observed. Correction of the lens distortion significantly improved the mean accuracy errors of either system. Even more, system precision (spread of the accuracy) improved significantly in both systems. Neither the use of a wide-angle converter nor multiple reassembly of the system had a significant negative effect on the results. The study shows that underwater stereophotography, independent of the system, has a high potential for robust and non-destructive in situ sampling and can be used without prior specialist training.

Marine radiocarbon resservoir effect of coastal waters off Cape Verde Archipelago

Quantification of the marine radiocarbon reservoir effect (R) is essential in order to calibrate conventional 14C dates from marine shell samples with reliability. R also provides information concerning the intensity of coastal upwelling in marine regions influenced by this phenomenon. 14C ages of closely associated marine samples (mollusk shells) and terrestrial samples (goat bones) from São Vicente Island, Cape Verde Archipelago, permitted the first calculation of the marine 14C reservoir effect in this region. A R weighted mean value of 70 ± 70 14C yr was obtained. This value is in accordance with the previously published oceanographic conditions of the region indicating the existence of a seasonal active upwelling regime.

Comprometimento Organizacional, Autocriticismo e Autocompaixão em Profissionais/Cuidadores Formais que Trabalham com Pessoas com Deficiência/Doença Mental

Introdução: Alguns estudos internacionais e nacionais têm-se dedicado a estudar as caraterísticas psicológicas de profissionais/cuidadores que trabalham na área da prestação de cuidados a pessoas com doença e deficiência mental. Porém, segundo temos conhecimento são escassos ou mesmo inexistentes os estudos que abordem os níveis de autocriticismo, autocompaixão e comprometimento organizacional destes profissionais/cuidadores. Foram nossos objetivos: caraterizar uma amostra de cuidadores formais/profissionais que trabalham com pessoas com doença e deficiência mental em diferentes variáveis sociodemográficas e profissionais; analisar os níveis de autocriticismo, autocompaixão e comprometimento organizacional destes cuidadores formais/profissionais, bem como explorar as associações entre todas estas variáveis (entre si e com as variáveis sociodemográficas e profissionais). Metodologia: 55 cuidadores formais de pessoas com doença/deficiência mental (sexo feminino/n = 49, 84,5%; idade média de 45,21; DP = 10,92; variação = 22-65) preencheram um questionário sociodemográfico, o Questionário de Comprometimento Organizacional, a Escala das Formas do Autocriticismo e Autotranquilização e a Escala de Autocompaixão. Resultados: O Eu inadequado apresentou um valor médio bastante maior que o Eu detestado. O valor médio do Eu tranquilizador foi superior a qualquer dimensão de autocriticismo. O Calor-Compreensão (autocompaixão) apresentou o valor médio mais elevado e a Autocrítica o valor médio mais baixo. O Eu inadequado e detestado associaram-se positivamente às dimensões negativas de autocompaixão e o Eu tranquilizador às dimensões positivas de autocompaixão. O Comprometimento Afetivo associou-se positivamente ao Autocriticismo total. O Comprometimento Calculativo associou-se positivamente ao Eu detestado, que foi seu preditor. O Comprometimento Normativo associou-se de forma positiva ao Eu detestado, Autocriticismo total e idade negativamente ao Mindfulness. A idade foi o seu preditor. O Comprometimento Afetivo associou-se positivamente aos meses de trabalho na instituição, que foram seus preditores. Os cuidadores com um familiar com deficiência mental tiveram um valor mais baixo de Eu inadequado. Discussão: No geral, esta amostra de cuidadores formais apresentou caraterísticas psicológicas que nos tranquilizam quanto ao papel que desempenham junto de pessoas com doença/deficiência mental, mas as instituições devem sempre encontrar formas de estimular os níveis de comprometimento e autocompaixão dos seus profissionais. / Introduction: Some international and national studies have focused on studying the psychological characteristics of professionals/caregivers working with people with mental disease and intelectual disability. However, to our knowledge, the studies exploring levels of selfcriticism, self-compassion and organizational commitment in these professionals are scarce or even nonexistent. Our goals were to: characterize a sample of formal caregivers/professionals who work with people with mental illness and intellectual in different sociodemographic and professional variables; analyze the levels of selfcriticism, self-compassion and organizational commitment of these formal caregivers/professionals, as well as explore the associations between all these variables (with each other and with the sociodemographic and professional variables and professionals). Methodology: 55 caregivers of people with mental disease/intelectual disability (female/n = 49, 84.5%; mean age of 45,21; DP = 10,92; variation = 22-65) completed a sociodemographic questionnaire, the Organizational Commitment questionnaire, the Forms of Self Criticism Rating Scale and the Self- Compassion Scale. Results: Inadequate Self had na higher mean value than the Hated Self. The mean value of the Reassuring Self was higher than any dimension of selfcriticism. Self-Kindness was the one with a higher mean value (of self-compassion) and Self-Judjment the one with the lowest mean value. The Inadequate Self and the Hated Self were positively associated with the negative dimensions of selfcompassion and the Reassuring Self with the positive dimensions of selfcompassion. The Affective Commitment was positively associated to total selfcriticism. The Continuance Commitment was associated with the Hated Self (positively), being its predictor. The Normative Commitment was positively associated to the Hated Self, the total selfcriticism and age and negatively to Mindfulness. Age was its predictor. The Affective Commitment was positively associated to months of work at the institution. This variable was its predictor. Professionals with a family member with intellectual disability had a lower value of Inadequate Self. Discussion: In general, this sample of formal caregivers presented psychological characteristics that reassure us about the role that they have while working with people with mental disease/intellectual disability, but the institutions must always find ways of stimulating the commitment and selfcompassion levels of their professionals.

Objetivos de Vida e Satisfação na Vida Conjugal em Pais/Progenitores de Crianças com Autismo

Introdução: A presença do diagnóstico de autismo numa criança é algo marcante no seio familiar. Implica inúmeros desafios para os seus pais/progenitores, podendo influenciar os objetivos delineados para as suas vidas e a satisfação na relação conjugal. Os nossos objetivos foram: caraterizar progenitores de crianças com autismo quanto aos objetivos de vida e satisfação na vida conjugal e explorar as associações existentes entre estas duas variáveis (e com variáveis sociodemográficas e relativas ao apoio recebido). Não deixamos de explorar os níveis de depressão, ansiedade, e stress, vivenciados por estes pais. Metodologia: 66 progenitores (sexo feminino, n = 52, 78,8%; idade média, M = 40,2, DP = 6,45) de crianças com autismo preencheram um questionário sociodemográfico, o Teste dos objetivos de vida/PIL-R, a Escala de Avaliação da Satisfação em Áreas da Vida Conjugal/EASAVIC e a Depression, Anxiety and Stress Scale-21/DASS-21. Resultados: Os progenitores revelaram valores médios de objetivos de vida (PIL-R). Foi na dimensão vivencial (PIL-R) e nas dimensões Comunicação e Intimidade Emocional (satisfação em áreas da vida conjugal/EASAVIC) que os progenitores apresentaram valores médios mais elevados. No caso da DASS-21, foi na escala Stress que os progenitores apresentaram valores mais elevados. Porém, em todas as dimensões da DASS-21, os níveis encontrados foram normais. Não se verificaram diferenças estatisticamente significativas por sexo em todas as dimensões do PIL-R, da EASAVIC e DASS-21. Ambas as dimensões do PIL-R, dimensional e existencial, bem como a sua pontuação total mostraram estar associadas com todas as dimensões da EASAVIC (satisfação em áreas da vida conjugal). As três dimensões da DASS-21 (Depressão, Ansiedade e Stress) revelaram estar associada (negativamente) com praticamente todas as dimensões da EASAVIC e do PIL-R. Os progenitores que pertenciam a associações de apoio apenas se diferenciaram dos progenitores que pertenciam a um grupo (de apoio e partilha) numa rede social na dimensão Ansiedade, com estes últimos a apresentarem um nível mais elevado. Discussão: Neste estudo (ainda que numa amostra de tamanho reduzido), inovador pelo tema explorado, os níveis dos objetivos de vida e de satisfação em áreas da vida conjugal (bem como de sintomas de psicopatologia) pareceram “não sofrer” o impacto associado ao facto dos progenitores terem um filho com autismo. Os objetivos de vida mantidos por estes pais influenciam a sua satisfação com a vida conjugal e vice-versa, indicando a importância das equipas que trabalham com estes pais não esquecerem a promoção destas variáveis. / Introduction: The presence of the diagnosis of autism in a child is something remarkable in the family. Involves many challenges for parents/progenitors, which can influence the goals they define in their lives and their satisfaction with the marital relationship. Our objectives were to characterize parents of children with autism on the objectives of life and satisfaction with marital life and explore the associations between these two variables (and with sociodemographic and support variables). We will not forget to explore the levels of depression, anxiety, and stress, experienced by these parents. Methodology: 66 parents (females, n = 52, 78.8%, mean age, M = 40.2, SD = 6.45) of children with autism completed a sociodemographic questionnaire, the Test of Life Goals/PIL-R, the Areas of Marital Satisfaction Rating Scale/EASAVIC and the Depression, Anxiety and Stress Scale-21/DASS-21. Results: Parents showed a mean value of life goals (PIL-R). Was in the experiential dimension (PIL-R) and the Communication and Emotional Intimacy dimensions (satisfaction in areas of marital life/EASAVIC) that the parents presented higher mean values. Regarding DASS-21, Stress was the scale in which the parents had higher values. However, in all the DASS-21, levels were “normal”. There were no statistically significant differences by gender in all the PIL-R, EASAVIC and DASS-21 scales. Both dimensions of the PIL-R, dimensional and existential, as well as the total score were found to be associated with all the dimensions of EASAVIC (satisfaction in areas of marital life). The three dimensions of the DASS-21 (Depression, Anxiety and Stress) revealed to be associated (negatively) with virtually all dimensions of the EASAVIC and the PIL-R. Parents who belonged to associations only differed from the parents from a social network group (of support and sharing) in the anxiety dimension, with the later presenting an higher level. Discussion: In this study (even if in a small sample size), innovative by the theme explored, levels of life goals and satisfaction in areas of marital life (as well as symptoms of psychopathology) seemed not to suffer from the impact of the parents having a child with autism. The life goals held by these parents influence their satisfaction with marital life and vice versa, indicating the importance of teams working with these parents of not forgetting the promotion of these variables.

Locus de controle e a efetividade empresarial em microempresários do estado do Rio Grande do Norte

Entrepreneurs are individuals who can transform economic and social realities by promoting development, so it became important tools in generating externalities in regions where they operate. In Brazil, 59.9% of new ventures do not reach the fourth year of life, the mortality rate of new ventures is high. The causes of mortality are numerous, and within the behavioral aspects, one is the locus of control. This study determines the degree of association between internal locus of control and achieving business success of entrepreneurs in Rio Grande do Norte who participated in the workshop EMPRETEC. The approach that studies the behavior entrepreneurs agreed that there are psychological characteristics associated with a set of values, attitudes and needs that determine the behavior and induce the entrepreneur to achieve success. Among these features is the locus of control, a skill that individuals must identify in their actions, or lack of them, the causes of their successes and failures. The locus is external when the individual attributes to factors outside themselves as causes of their results, and is built in when you can identify the actions that led to success. We surveyed 223 entrepreneurs statewide who answered the questionnaire for assessing the scale of locus of control, selfassessment questionnaire of entrepreneurial characteristics of EMPRETEC and a questionnaire assessing the business success. 71.9% were identified as having success. Among the behavioral characteristics strongest in the group of entrepreneurs are setting goals and commitment. Was found for locus of control mean value of 7.35, confidence interval between 7.05 and 7.66. Showing that the locus of control group is predominantly internal. We also found a correlation between the locus and commitment, between setting goals and commitment; calculated risks and information search; search of information and commitment, and between commitment and independence and self confidence. Dependence was not identified among the set of features and business success, determining the absence of an ideal profile. However, logistic regression significant association was found indicating that the smaller the individual's locus of control increased the likelihood of it achieving business success

Occupational exposure to Aflatoxin B1 in a Portuguese poultry slaughterhouse

Aflatoxin B1 (AFB1) is a secondary metabolite produced by the fungi Aspergillus flavus and is the most potent hepatocarcinogen known in mammals and has been classified by the International Agency of Research on Cancer as Group 1 carcinogen. Although dietary exposure to AFB1 has been extensively documented, there are still few studies dedicated to the problem of occupational exposure. Considering recent findings regarding AFB1 occupational exposure in poultry production, it was considered relevant to clarify if there is also exposure in poultry slaughterhouses. Occupational exposure assessment to AFB1 was done with a biomarker of internal dose that measures AFB1 in the serum by enzyme-linked immunosorbent assay. Thirty workers from a slaughterhouse were enrolled in this study. A control group (n = 30) was also considered in order to know AFB1 background levels for Portuguese population. Fourteen workers (47.0%) showed detectable levels of AFB1 with values from 1.06 to 4.03ng ml(-1), with a mean value of 1.73ng ml(-1). No AFB1 was detected in serum of individuals used as controls. Despite uncertainties regarding the exposure route that is contributing more to exposure (inhalation or dermal) is possible to state that exposure to AFB1 is occurring in the slaughterhouse studied. It seems that reducing AFB1 contamination in poultry production can have a positive result in this occupational setting.

Indoor environment and the impact on the health of pre-exisiting asthmatics at work: the development of a risk management framework

This thesis examines the spatial and temporal variation in nitrogen dioxide (NO2) levels in Guernsey and the impacts on pre-existing asthmatics. Whilst air quality in Guernsey is generally good, the levels of NO2 exceed UK standards in several locations. The evidence indicates that people suffering from asthma have exacerbation of their symptoms if exposed to elevated levels of air pollutants including NO2, although this research has never been carried out in Guernsey before. In addition, exposure assessment of individuals is rarely carried out and research in this area is limited due to the complexity of undertaking such a study, which will include a combination of exposures in the home, the workplace and ambient exposures, which vary depending on the individual daily experience. For the first time in Guernsey, this research has examined NO2 levels in correlation with asthma patient admissions to hospital, assessment of NO2 exposures in typical homes and typical workplaces in Guernsey. The data showed a temporal correlation between NO2 levels and the number of hospital admissions and the trend from 2008-2012 was upwards. Statistical analysis of the data did not show a significant linear correlation due to the small size of the data sets. Exposure assessment of individuals showed a spatial variation in exposures in Guernsey and assessment in indoor environments showed that real-time analysis of NO2 levels needs to be undertaken if indoor micro environments for NO2 are the be assessed adequately. There was temporal and spatial variation in NO2 concentrations measured using diffusion tubes, which provide a monthly mean value, and analysers measuring NO2 concentrations in real time. The research shows that building layout and design are important factors for good air flow and ventilation and the dispersion of NO2 indoors. Environmental Health Officers have statutory responsibilities for ambient air quality, hygiene of buildings and workplace environments and this role needs to be co-ordinated with healthcare professionals to improve health outcomes for asthmatics. The outcome of the thesis was the development of a risk management framework for pre-existing asthmatics at work for use by regulators of workplaces and an information leaflet to assist in improving health outcomes for asthmatics in Guernsey.

Microstructures layering, mechanisms in the middle waters of the Persian Gulf

Layered structures, known as micro structures in marine environments are common features of which their formation mechanisms are first reviewed. Some methods of measuring such features based on the measurements and theories are presented for the Persian Gulf. This includes determination of layers with temperature inversion (TI) associated with double diffusive convection (DDC). The relevant associated parameters are estimated from ROPME CTD data for late winter and early summer of 1992. Only in certain parts temperature inversion and DDC are observed which seem to produce layered structures. Observations show that the places with TI and DDC are mainly confined to the frontal regions where the water entering the Persian Gulf and water exiting it meet, nearly along the axis of the Gulf. TI and DDC is mainly observer in the northern bound of the front. Typical density ratio for regions with TI and DDC is 0.7 to 0.2 and the mean depth is at about 37 ± 3 m for the Persian Gulf. TI and DDC are also found in the outflow from the Persian Gulf to the Oman Gulf which is found to be at a depth of about 250 m. Horizontal addiction and reduction of solar heating seem to be the main reasons in producing layers with TI and DDC. It is also found that the regime of DDC in the Persian Gulf is more diffusive and the flow associated with intrusion layers with TI is non-isopycnal (more unstable). However for the Oman sea both diffusive and finger regime are observed and the flow is inferred to be isopycnal (more stable statically). Typical heat and salt fluxes due to DDC are found to be 6 W/m2 and 0.36 W/m2 respectively. Effective salinity diffusivity, Ks and heat diffusivity, Kr have been estimated for the places with DDC in the Persian Gulf and Oman Gulf (Ks=1.1 *10-7 m2/s, KT= 1.88*10-6 m2/s). Their values are within the values obtained by others. The buoyancy frequency for the Persian Gulf with typical mean value of 0.05s-1 is much higher than these of the free Oceans. Such large values of N (typically 0.05 s-1) indicate that processes such as tide can produce strong internal waves which may be another factor in producing layered structures. This requires separate study.

Comunidade fitoplanctônica e qualidade da água da Lagoa do Jiqui, Parnamirim, RN

It is important to evaluate the quality of water for proper management of these resources, since the increase of environmental degradation and the multiple use of water resources are decreasing the quality of water consumed by living beings. The objective of this study was to characterize the phytoplankton community and its variations during periods of dray and rain in Jiqui Lake located in Parnamirim, RN. It was also aimed to analyze the physical and chemical factors of this environment, in order to contribute to the knowledge of water quality used for human consumption. The collection of water samples were carried out in September 2008 to August 2009. The collection of the phytoplankton community was carried out in four sampling sites (surface, bottom, margin of the lake without macrophytes and site dominated by macrophytes). Phytoplankton was collected using plankton net of 20m. The analysis of nutrients and identification of phytoplankton were performed in the laboratory. The results indicate that concentration of chlorophyll a was high in the bottom with mean value of 1.07 μgL-1 (SD ± 1.61). During the study period there was a dominance of the following species: Euglena gracilis, Trachelomonas sp, Cyclotellas sp, Gomphonema apuncto, Navicula cuspidata var. cuspidata, Navicula sp, Rhopalodia gibba. There was homogeneity between limnological values in the four study sites, with significant difference between the periods of drought and rain. The Jiqui Lake is considered oligotrophic due to its low concentrations of chlorophyll a, high transparency and low levels of nutrients. The values of BOD and chlorophyll a concentration remained below the permitted standards existing for freshwaters in Brazil, thus the water from Lake Jiqui is of good quality, suitable for human consumption.

Association between obstructive sleep apnea severity and glucose control in patients with untreated versus treated diabetes

International audience

Investigating the cosmic-ray ionization rate in the galactic interstellar medium through observations of H3+

Observations of H3+ in the Galactic diffuse interstellar medium (ISM) have led to various surprising results, including the conclusion that the cosmic-ray ionization rate (zeta_2) is about 1 order of magnitude larger than previously thought. The present survey expands the sample of diffuse cloud sight lines with H3+ observations to 50, with detections in 21 of those. Ionization rates inferred from these detections are in the range (1.7+-1.0)x10^-16 s^-1 < zeta_2 < (10.6+-6.8)x10^-16 s^-1 with a mean value of zeta_2=(3.3+-0.4)x10^-16 s^-1. Upper limits (3sigma) derived from non-detections of H3+ are as low as zeta_2 < 0.4x10^-16 s^-1. These low upper-limits, in combination with the wide range of inferred cosmic-ray ionization rates, indicate variations in zeta_2 between different diffuse cloud sight lines. Calculations of the cosmic-ray ionization rate from theoretical cosmic-ray spectra require a large flux of low-energy (MeV) particles to reproduce values inferred from observations. Given the relatively short range of low-energy cosmic rays --- those most efficient at ionization --- the proximity of a cloud to a site of particle acceleration may set its ionization rate. Variations in zeta_2 are thus likely due to variations in the cosmic-ray spectrum at low energies resulting from the effects of particle propagation. To test this theory, H3+ was observed in sight lines passing through diffuse molecular clouds known to be interacting with the supernova remnant IC 443, a probable site of particle acceleration. Where H3+ is detected, ionization rates of zeta_2=(20+-10)x10^-16 s^-1 are inferred, higher than for any other diffuse cloud. These results support both the concept that supernova remnants act as particle accelerators, and the hypothesis that propagation effects are responsible for causing spatial variations in the cosmic-ray spectrum and ionization rate. Future observations of H3+ near other supernova remnants and in sight lines where complementary ionization tracers (OH+, H2O+, H3O+) have been observed will further our understanding of the subject.