Purchasing Power Parities for Industry Comparisons Using Weighted Elteto-Koves-Szulc (EKS) Methods

This study has three main objectives. First, it develops a generalization of the commonly used EKS method to multilateral price comparisons. It is shown that the EKS system can be generalized so that weights can be attached to each of the link comparisons used in the EKS computations. These weights can account for differing levels of reliability of the underlying binary comparisons. Second, various reliability measures and corresponding weighting schemes are presented and their merits discussed. Finally, these new methods are applied to an international data set of manufacturing prices from the ICOP project. Although theoretically superior, it appears that the empirical impact of the weighted EKS method is generally small compared to the unweighted EKS. It is also found that this impact is larger when it is applied at lower levels of aggregation. Finally, the importance of using sector specific PPPs in assessing relative levels of manufacturing productivity is indicated.

Business strategy and the environment in a traditional manufacturing sector

This research is concerned with the relationship between business strategy and the environment within traditional sectors. It has sought to learn more about the strategic environmental attitudes of SMEs compared with large companies operating under the same market conditions. The sector studied is the ceramics industry (including tableware & ornamental-ware, sanitary ware & tiles, bricks, industrial & advanced ceramics and refractories) in the UK and France. Unlike the automotive, oil, chemical, steel or metal processing sectors, this industry is one of the few industrial sectors which has rarely been considered. The information on this sector was gathered by interviewing people responsible for environmental issues. The actual programme of valid interviews represents approximately a quarter of the UK and French ceramics industry which is large enough to enable a quantitative analysis and significant and non-biased conclusions. As a whole, all companies surveyed agreed that the ceramics activity impacts on the environment, and that they are increasingly affected both by environmental legislation, and by various non-legislative pressures. Approaches to the environmental agenda differ significantly among large and small companies. Smaller companies feel particularly pressed both by the financial costs and management time required to meet complex and changing legislation. The results of this survey also suggest that the ceramics industry sees environmental issues in terms of increased costs rather than new business opportunities. This is due principally to fears of import substitution from countries with lower environmental standards. Finally, replies indicate that generally there is a low level of awareness of the current legislative framework, suggesting a need to shift from a regulatory approach to a more self-regulated approach which encourages companies to be more proactive

The future of manufacturing

Anyone who looks at the title of this special issue will agree that the intent behind the preparation of this volume was ambitious: to predict and discuss “The Future of Manufacturing”. Will manufacturing be important in the future? Even though some sceptics might say not, and put on the table some old familiar arguments, we would strongly disagree. To bring subsidies for the argument we issued the call-for-papers for this special issue of Journal of Manufacturing Technology Management, fully aware of the size of the challenge in our hands. But we strongly believed that the enterprise would be worthwhile. The point of departure is the ongoing debate concerning the meaning and content of manufacturing. The easily visualised internal activity of using tangible resources to make physical products in factories is no longer a viable way to characterise manufacturing. It is now a more loosely defined concept concerning the organisation and management of open, interdependent, systems for delivering goods and services, tangible and intangible, to diverse types of markets. Interestingly, Wickham Skinner is the most cited author in this special issue of JMTM. He provides the departure point of several articles because his vision and insights have guided and inspired researchers in production and operations management from the late 1960s until today. However, the picture that we draw after looking at the contributions in this special issue is intrinsically distinct, much more dynamic, and complex. Seven articles address the following research themes: 1.new patterns of organisation, where the boundaries of firms become blurred and the role of the firm in the production system as well as that of manufacturing within the firm become contingent; 2.new approaches to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface; 3.new challenges in strategic and operational decisions due to changes in the profile of the workforce; 4.new global players, especially China, modifying the manufacturing landscape; and 5.new techniques, methods and tools that are being made feasible through progress in new technological domains. Of course, many other important dimensions could be studied, but these themes are representative of current changes and future challenges. Three articles look at the first theme: organisational evolution of production and operations in firms and networks. Karlsson's and Skold's article represent one further step in their efforts to characterise “the extraprise”. In the article, they advance the construction of a new framework, based on “the network perspective” by defining the formal elements which compose it and exploring the meaning of different types of relationships. The way in which “actors, resources and activities” are conceptualised extends the existing boundaries of analytical thinking in operations management and open new avenues for research, teaching and practice. The higher level of abstraction, an intrinsic feature of the framework, is associated to the increasing degree of complexity that characterises decisions related to strategy and implementation in the manufacturing and operations area, a feature that is expected to become more and more pervasive as time proceeds. Riis, Johansen, Englyst and Sorensen have also based their article on their previous work, which in this case is on “the interactive firm”. They advance new propositions on strategic roles of manufacturing and discuss why the configuration of strategic manufacturing roles, at the level of the network, will become a key issue and how the indirect strategic roles of manufacturing will become increasingly important. Additionally, by considering that value chains will become value webs, they predict that shifts in strategic manufacturing roles will look like a sequence of moves similar to a game of chess. Then, lastly under the first theme, Fleury and Fleury develop a conceptual framework for the study of production systems in general derived from field research in the telecommunications industry, here considered a prototype of the coming information society and knowledge economy. They propose a new typology of firms which, on certain dimensions, complements the propositions found in the other two articles. Their telecoms-based framework (TbF) comprises six types of companies characterised by distinct profiles of organisational competences, which interact according to specific patterns of relationships, thus creating distinct configurations of production networks. The second theme is addressed by Kyläheiko and SandstroÍm in their article “Strategic options based framework for management of dynamic capabilities in manufacturing firms”. They propose a new approach to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface. Their framework for a manufacturing firm in the digital age leads to active asset selection (strategic investments in both tangible and intangible assets) and efficient orchestrating of the global value net in “thin” intangible asset markets. The framework consists of five steps based on Porter's five-forces model, the resources-based view, complemented by means of the concepts of strategic options and related flexibility issues. Thun, GroÍssler and Miczka's contribution to the third theme brings the human dimension to the debate regarding the future of manufacturing. Their article focuses on the challenges brought to management by the ageing of workers in Germany but, in the arguments that are raised, the future challenges associated to workers and work organisation in every production system become visible and relevant. An interesting point in the approach adopted by the authors is that not only the factual problems and solutions are taken into account but the perception of the managers is brought into the picture. China cannot be absent in the discussion of the future of manufacturing. Therefore, within the fourth theme, Vaidya, Bennett and Liu provide the evidence of the gradual improvement of Chinese companies in the medium and high-tech sectors, by using the revealed comparative advantage (RCA) analysis. The Chinese evolution is shown to be based on capabilities developed through combining international technology transfer and indigenous learning. The main implication for the Western companies is the need to take account of the accelerated rhythm of capability development in China. For other developing countries China's case provides lessons of great importance. Finally, under the fifth theme, Kuehnle's article: “Post mass production paradigm (PMPP) trajectories” provides a futuristic scenario of what is already around us and might become prevalent in the future. It takes a very intensive look at a whole set of dimensions that are affecting manufacturing now, and will influence manufacturing in the future, ranging from the application of ICT to the need for social transparency. In summary, this special issue of JMTM presents a brief, but undisputable, demonstration of the possible richness of manufacturing in the future. Indeed, we could even say that manufacturing has no future if we only stick to the past perspectives. Embracing the new is not easy. The new configurations of production systems, the distributed and complementary roles to be performed by distinct types of companies in diversified networked structures, leveraged by the new emergent technologies and associated the new challenges for managing people, are all themes that are carriers of the future. The Guest Editors of this special issue on the future of manufacturing are strongly convinced that their undertaking has been worthwhile.

Regional foreign direct investment and wage spillovers:plant level evidence from the UK electronics industry

This paper examines the extent to which foreign investment in the UK generates wage spillovers in the domestic sector of the economy using a simultaneous dynamic panel data model and focusing on the electronics sector, possibly the most ‘globalized’ sector of UK manufacturing. It finds evidence that the higher wages paid by foreign firms cause wages in the domestic sector to be bid up. This phenomenon is, however, largely confined to the region where foreign direct investment takes place.

Foreign manufacturing, regional agglomeration and technical efficiency in UK industries: a stochastic production frontier approach

The paper examines howfar foreign manufacturing investment in UK industries, together with the spatial agglomeration of those industries, affect technical efficiency. The paper links research on the estimation of technical efficiency,with those literatures demonstrating the economies associated with foreign direct investment and spatial agglomeration. The methodology involves estimation of a stochastic production frontier with random components associated with industry technical inefficiency, and a standard error. The paper also explores whether the degree of foreign involvement has a greater impact on technical efficiency where the domestic industry sector is characterized by comparatively high productivity and spatial agglomeration. The policy implications of the analysis are discussed.

Determinants of entry and exit in the foreign owned sector of UK manufacturing

This paper examines the extent to which foreign entry and exit in the UK is related to domestic industry characteristics. The units of analysis are firm numbers, and thus entry and exit at the industry level are treated as being generated by Poisson processes. This therefore uses quasimaximum likelihood estimation, to estimate entry and exit functions simultaneously. The results demonstrate that foreign entry is attracted by industry level profitability and performance, but that firm specific 'ownership' advantages are also important. The results also demonstrate that inward investors that are motivated by the desire to exploit firm-specific assets, are unlikely to be more transient than domestic firms. This however, cannot be said of those foreign entrants who are attracted to the UK by location advantage or investment incentives.

Industrial performance, agglomeration, and foreign manufacturing investment in the UK

This paper examines the relationship between the comparative advantage of UK industries, and new inward investment into these industries. The paper demonstrates that the extent of foreign manufacturing investment in an industry, and the spatial agglomeration of that industry, are significant determinants of industry comparative advantage, thus providing evidence of agglomeration benefits to both domestic and foreign firms. The paper then shows that industry comparative advantage itself, toegther with a series of industry specific characteristics, are important determinants of new foreigh manufacturing investment, thus providing evidence of the dynamic benefits of foreign direct investment in the UK economy.

Impact of liberalization on efficiency and productivity of sugar industry in Kenya

Purpose – The data used in this study is for the period 1980-2000. Almost midway through this period (in 1992), the Kenyan government liberalized the sugar industry and the role of the market increased, while the government's role with respect to control of prices, imports and other aspects in the sector declined. This exposed the local sugar manufacturers to external competition from other sugar producers, especially from the COMESA region. This study aims to find whether there were any changes in efficiency of production between the two periods (pre and post-liberalization). Design/methodology/approach – The study utilized two methodologies to efficiency estimation: data envelopment analysis (DEA) and the stochastic frontier. DEA uses mathematical programming techniques and does not impose any functional form on the data. However, it attributes all deviation from the mean function to inefficiencies. The stochastic frontier utilizes econometric techniques. Findings – The test for structural differences in the two periods does not show any statistically significant differences between the two periods. However, both methodologies show a decline in efficiency levels from 1992, with the lowest period experienced in 1998. From then on, efficiency levels began to increase. Originality/value – To the best of the authors' knowledge, this is the first paper to use both methodologies in the sugar industry in Kenya. It is shown that in industries where the noise (error) term is minimal (such as manufacturing), the DEA and stochastic frontier give similar results.

Intra-industry foreign direct investment, uneven development and globalization:the legacy of Stephen Hymer

This paper revisits the issue of intra-industry foreign direct investment (FDI). This issue was considered in Stephen Hymer's early work, but was not subsequently developed, and was largely ignored in the literature for some time. Using the example of the UK, this paper traces the patterns of intra-industry FDI, both across countries and industries, for both the manufacturing and service sectors. Despite the undoubted increase in the integration of goods and factor markets since the time of Hymer's writing, the analysis presented here shows that the pattern has changed little in the last 40 years. The paper then goes on to discuss the motives for intra-industry FDI, relating it to technology flows and factor cost differentials. Finally, we present some analysis relating intra-industry FDI to uneven development, both between developed and developing countries, and between regions of a developed country. It is clear that intra-industry FDI is still very much a developed country phenomenon, as Hymer suggested, with both developing countries and poorer regions of developed countries unlikely to reap any of the benefits. In this context, one-way and two-way FDI must be seen as different phenomena within the debate on globalisation. © The Author 2005. Published by Oxford University Press on behalf of the Cambridge Political Economy Society. All rights reserved.

The determinants of export performance:evidence for manufacturing plants in Ireland and Northern Ireland

The dramatic GDP and export growth of Ireland over the last decade forms a marked contrast with that of its nearest neighbour Northern Ireland. In Ireland, export volume growth averaged 15.5% p.a. from 1991 to 1999 compared with 6.3% from Northern Ireland. Using data on individual manufacturing plants this paper considers the determinants of export performance in the two areas. Larger, externally owned plants with higher skill levels are found to have the highest export propensities in both areas. Other influences (plant age, R&D, etc.) prove more strongly conditional on location, plant size, and ownership. Structural factors (e.g. ownership, industry) explain almost all of the difference in export propensity between larger plants in Northern Ireland and Ireland but only around one-third of that between smaller plants. Significant differences are also evident between plants in terms of their sources of new technology. For indigenously owned plants, inhouse R&D is important. For externally owned plants, R&D conducted elsewhere in the group - typically outside Ireland and Northern Ireland - proves more significant. This external dependency and lower than expected export propensity on the part of small plants in Northern Ireland represent significant policy challenges for the future.© 2006 Scottish Economic Society. Published by Blackwell Publishing Ltd.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Identifying innovation strategies: insights from the Greek food manufacturing sector

This paper examines the concept of innovation that is widely recognised as very important for all companies across different business sectors. The paper initially provides a review of the innovation literature in terms of types, classifications and sources of innovation that have been proposed over time. Then, the paper examines innovation in the context of the food industry, and in particular, it attempts to identify innovation strategies followed by Greek food manufacturing companies based on a specific model. Evidence from the Greek food manufacturing sector indicates that companies tend to innovate along the dimension of offerings that is more related to the traditional view of innovation (product and process innovation).