Self Instructional Math, HR-324, 1995

The Self Instructional Math course book is designed to provide a basic math knowledge for those involved in the planning, design, and construction of highways. It was developed in a manner to allow the student to take the course with minimal supervision and at times that the work schedule allows. The first version of the course was developed in the early 1970's and due to its popularity was revised in the early 1990's to reflect changes in the highway construction math needs. The anticipated move to metric (System International) measurements by the highway industry has necessitated the need to change the math course problem values to metric units. The course includes the latest in Iowa DOT policy information relative to the selection and use of metric values for highway design, and construction. Each unit of the book contains instructional information, section quizzes and a comprehensive examination. All problem values are expressed in metric rather than dual (english and SI) units. The appendix contains useful conversion factors to assist the reader in making the change to metric.

K-r/K-c but not d(N)/d(S) correlates positively with body mass in birds, raising implications for inferring lineage-specific selection

Background: The ratio of the rates of non-synonymous and synonymous substitution (d(N)/d(S)) is commonly used to estimate selection in coding sequences. It is often suggested that, all else being equal, d(N)/d(S) should be lower in populations with large effective size (Ne) due to increased efficacy of purifying selection. As N-e is difficult to measure directly, life history traits such as body mass, which is typically negatively associated with population size, have commonly been used as proxies in empirical tests of this hypothesis. However, evidence of whether the expected positive correlation between body mass and d(N)/d(S) is consistently observed is conflicting. Results: Employing whole genome sequence data from 48 avian species, we assess the relationship between rates of molecular evolution and life history in birds. We find a negative correlation between dN/dS and body mass, contrary to nearly neutral expectation. This raises the question whether the correlation might be a method artefact. We therefore in turn consider non-stationary base composition, divergence time and saturation as possible explanations, but find no clear patterns. However, in striking contrast to d(N)/d(S), the ratio of radical to conservative amino acid substitutions (K-r/K-c) correlates positively with body mass. Conclusions: Our results in principle accord with the notion that non-synonymous substitutions causing radical amino acid changes are more efficiently removed by selection in large populations, consistent with nearly neutral theory. These findings have implications for the use of d(N)/d(S) and suggest that caution is warranted when drawing conclusions about lineage-specific modes of protein evolution using this metric.

Cardiac motion estimation by joint alignment of tagged MRI sequences

Image registration has been proposed as an automatic method for recovering cardiac displacement fields from Tagged Magnetic Resonance Imaging (tMRI) sequences. Initially performed as a set of pairwise registrations, these techniques have evolved to the use of 3D+t deformation models, requiring metrics of joint image alignment (JA). However, only linear combinations of cost functions defined with respect to the first frame have been used. In this paper, we have applied k-Nearest Neighbors Graphs (kNNG) estimators of the -entropy (H ) to measure the joint similarity between frames, and to combine the information provided by different cardiac views in an unified metric. Experiments performed on six subjects showed a significantly higher accuracy (p < 0.05) with respect to a standard pairwise alignment (PA) approach in terms of mean positional error and variance with respect to manually placed landmarks. The developed method was used to study strains in patients with myocardial infarction, showing a consistency between strain, infarction location, and coronary occlusion. This paper also presentsan interesting clinical application of graph-based metric estimators, showing their value for solving practical problems found in medical imaging.

3D noise power spectrum applied on clinical mdct scanners: effects of reconstruction algorithms and reconstruction filters

The noise power spectrum (NPS) is the reference metric for understanding the noise content in computed tomography (CT) images. To evaluate the noise properties of clinical multidetector (MDCT) scanners, local 2D and 3D NPSs were computed for different acquisition reconstruction parameters.A 64- and a 128-MDCT scanners were employed. Measurements were performed on a water phantom in axial and helical acquisition modes. CT dose index was identical for both installations. Influence of parameters such as the pitch, the reconstruction filter (soft, standard and bone) and the reconstruction algorithm (filtered-back projection (FBP), adaptive statistical iterative reconstruction (ASIR)) were investigated. Images were also reconstructed in the coronal plane using a reformat process. Then 2D and 3D NPS methods were computed.In axial acquisition mode, the 2D axial NPS showed an important magnitude variation as a function of the z-direction when measured at the phantom center. In helical mode, a directional dependency with lobular shape was observed while the magnitude of the NPS was kept constant. Important effects of the reconstruction filter, pitch and reconstruction algorithm were observed on 3D NPS results for both MDCTs. With ASIR, a reduction of the NPS magnitude and a shift of the NPS peak to the low frequency range were visible. 2D coronal NPS obtained from the reformat images was impacted by the interpolation when compared to 2D coronal NPS obtained from 3D measurements.The noise properties of volume measured in last generation MDCTs was studied using local 3D NPS metric. However, impact of the non-stationarity noise effect may need further investigations.

Implementation of a Pilot Continuous Monitoring System: Iowa Falls Arch Bridge, HR-1088, 2015

The goal of this work was to move structural health monitoring (SHM) one step closer to being ready for mainstream use by the Iowa Department of Transportation (DOT) Office of Bridges and Structures. To meet this goal, the objective of this project was to implement a pilot multi-sensor continuous monitoring system on the Iowa Falls Arch Bridge such that autonomous data analysis, storage, and retrieval can be demonstrated. The challenge with this work was to develop the open channels for communication, coordination, and cooperation of various Iowa DOT offices that could make use of the data. In a way, the end product was to be something akin to a control system that would allow for real-time evaluation of the operational condition of a monitored bridge. Development and finalization of general hardware and software components for a bridge SHM system were investigated and completed. This development and finalization was framed around the demonstration installation on the Iowa Falls Arch Bridge. The hardware system focused on using off-the-shelf sensors that could be read in either “fast” or “slow” modes depending on the desired monitoring metric. As hoped, the installed system operated with very few problems. In terms of communications—in part due to the anticipated installation on the I-74 bridge over the Mississippi River—a hardline digital subscriber line (DSL) internet connection and grid power were used. During operation, this system would transmit data to a central server location where the data would be processed and then archived for future retrieval and use. The pilot monitoring system was developed for general performance evaluation purposes (construction, structural, environmental, etc.) such that it could be easily adapted to the Iowa DOT’s bridges and other monitoring needs. The system was developed allowing easy access to near real-time data in a format usable to Iowa DOT engineers.

Magmatic fluids in the Breccia-hosted epithermal Au-Ag deposit of Rosia Montana, Romania

The breccia-hosted epithermal Au-Ag deposit of Rosia Montana is located 7 kin northeast of Abrud, in the northern part of the South Apuseni Mountains, Romania. Estimated total reserves of 214.91 million metric toils (Mt) of ore at 1.46 g/t An and 6.9 g/t Ag (10.1 Moz of An and 47.6 Moz of Ag) make Rosia Montana one of the largest gold deposits in Europe. At this location, Miocene calc-alkaline magmatic and hydrothermal activity was associated with local extensional tectonics within a strike-slip regime related to the indentation of the Adriatic microplate into the European plate during the Carpathian orogenesis. The host rocks of the magmatic complex consist of pre-Mesozoic metamorphosed continental crust covered by Cretaceous turbiditic sediment (flysch). Magmatic activity at Rosia Montana and its surroundings occurred in several pulses and lasted about 7 m.y, Rosia Montana is a breccia-hosted epithermal system related to strong phreatomagmatic activity due to the shallow emplacement of the Montana dacite. The Montana dacite intruded Miocene volcaniclastic material (volcaniclastic breccias) and crops out at Cetate and Carnic Hills. Current mining is focused primarily on the Cetate open pit, which was mapped in detail, leading to the recognition of three distinct breccia bodies: the dacite breccia with a dominantly hydrothermal matrix, the gray polymict breccia with a greater proportion of sand-sized matrix support, and the black polymict breccia, which reached to the surface, contains carbonized tree trunks and has a dominantly barren elastic matrix. The hydrothermal alteration is pervasive. Adularia alteration with a phyllic overprint is ubiquitous; silicification and argillic alteration occur locally. Mineralization consists of quartz, adularia, carbonates (commonly Mn-rich), pyrite, Fe-poor sphalerite, galena, chalcopyrite, tetrahedrite, and native gold and occurs as disseminations, as well as in veins and filling vugs within the Montana dacite and the different breccias. The age of mineralization (12.85 +/- 0.07 Ma) was determined by Ar-40- Ar-39 dating on hydrothermal adularia crystals from vugs in the dacite breccia in the Cetate open pit. Microthermometric measurements of fluid inclusions in quartz phenocrysts from the Montana dacite revealed two fluid types that are absent from the hydrothermal breccia and must have been trapped at depth prior to dacite dome emplacement: brine inclusions (32-55 -wt % NaCl equiv, homogenizing at T-h > 460 degrees C) and intermediate density fluids (4.9-15.6 wt % NaCl equiv, T, between 345 degrees-430 degrees C). Secondary aqueous fluid inclusion assemblages in the phenocrysts have salinities of 0.2 to 2.2 wt percent NaCl equiv and T-h of 200 degrees to 280 degrees C. Fluid inclusion assemblages in hydrothermal quartz from breccias and veins have salinities of 0.2 to 3.4 wt percent NaCl equiv and T-h, from 200 degrees to 270 degrees C. The oxygen isotope composition of several zones of an ore-related epithermal quartz crystal indicate a very constant delta O-18 of 4.5 to 5.0 per mil for the mineralizing fluid, despite significant salinity and temperature variation over time. Following microthermometry, selected fluid inclusion assemblages were analyzed by laser ablation-inductively coupled-plasma mass spectrometry (LA-ICMS). Despite systematic differences in salinity between phenocryst-hosted fluids trapped at depth and fluids from quartz in the epithermal breccias, all fluids have overlapping major and trace cation ratios, including identical Na/K/Rb/Sr/Cs/Ba. Consistent with the constant near-magmatic oxygen isotope composition of the hydrothermal fluids, these data strongly indicate a common magmatic component of these chemically conservative solutes in all fluids. Cu, Pb, Zn, and Mn show variations in concentration relative to the relatively non-reactive alkalis, reflecting the precipitation of sulfide minerals together with An in the epithermal breccia, and possibly of Cu in an inferred subjacent porphyry environment. The magmatic-hydrothermal processes responsible for epithermal Au-Ag mineralization at Rosia Montana are, however, not directly related to the formation of the spatially associated porphyry Cu-Au deposit of Rosia Poieni, which occurred lout 3 m.y. later.

Adaptive tuning of perceptual timing to whole body motion.

In a previous work we have shown that sinusoidal whole-body rotations producing continuous vestibular stimulation, affected the timing of motor responses as assessed with a paced finger tapping (PFT) task (Binetti et al. (2010). Neuropsychologia, 48(6), 1842-1852). Here, in two new psychophysical experiments, one purely perceptual and one with both sensory and motor components, we explored the relationship between body motion/vestibular stimulation and perceived timing of acoustic events. In experiment 1, participants were required to discriminate sequences of acoustic tones endowed with different degrees of acceleration or deceleration. In this experiment we found that a tone sequence presented during acceleratory whole-body rotations required a progressive increase in rate in order to be considered temporally regular, consistent with the idea of an increase in "clock" frequency and of an overestimation of time. In experiment 2 participants produced self-paced taps, which entailed an acoustic feedback. We found that tapping frequency in this task was affected by periodic motion by means of anticipatory and congruent (in-phase) fluctuations irrespective of the self-generated sensory feedback. On the other hand, synchronizing taps to an external rhythm determined a completely opposite modulation (delayed/counter-phase). Overall this study shows that body displacements "remap" our metric of time, affecting not only motor output but also sensory input.

Asset Management Program Enhancement Plan: Baseline Assessment Phases I and II, 2015

This project resulted in the development of a framework for making asset management decisions on low-volume bridges. The research focused on low-volume bridges located in the agricultural counties of Iowa because recent research has shown that these counties have the greatest percentage of structurally deficient bridges in the nation. Many of the same counties also have the highest crop yields in the state, creating a situation where detours caused by deficient bridges on farm-to-market roads increase the cost to transport the crops. Thus, the research proposed the use of social return on investment (SROI), a tool used by international institutions such as the World Bank, as an asset management metric to gauge to the socioeconomic impact of structurally deficient bridges on the state in an effort to provide quantified justification to fund improvements on low-volume assets such as these rural bridges. The study found that combining SROI with current asset management metrics like average daily traffic (ADT) made it possible to prioritize the bridges in such a way that the limited resources available are allocated in a manner that promotes a more equitable distribution and that directly benefits the user, in this case Iowa farmers. The result is a system that more closely aligns itself with the spirit of MAP-21, in that infrastructure investments are used to facilitate economic growth for Iowa’s agricultural economy.

Seleção recorrente recíproca na obtenção de híbridos interpopulacionais de milho-pipoca

O objetivo deste trabalho foi avaliar a eficiência da seleção recorrente recíproca em produzir híbridos de milho-pipoca (Zea mays) de progênies endógamas superiores, com famílias de irmãos-completos. O programa de seleção recorrente recíproca envolveu as populações de milho-pipoca 'Viçosa' e 'Beija-Flor'. Os testes dos híbridos S0xS0 e S1xS1 foram conduzidos em delineamento látice, nos anos agrícolas de 2002/2003 e 2004/2005. Os dois ensaios incluíram testemunhas comerciais comuns, que permitiram a comparação do desempenho dos híbridos. Analisaram-se a produtividade e a capacidade de expansão. Foram preditos ganhos direto e indireto com a seleção em capacidadede expansão, avaliada em pipoqueira de ar quente e na pipocadora "Metric Weight Volume Tester". Os ganhos observados foram calculados para avaliar a eficiência da seleção recorrente recíproca. As análises de covariância mostraram variabilidade genotípica nas populações. Em relação às testemunhas comerciais, os híbridos S0xS0 foram inferiores em qualidade e equivalentes em produtividade, e os híbridos S1xS1 foram equivalentes nas duas características. O ganho observado na capacidade de expansão foi substancial, cerca de 4 mL g-1, superior ao ganho predito (2,8 mL g-1). A redução observada na produtividade não foi relevante. Verificou-se redução na variabilidade genotípica quanto à capacidade de expansão. O método de seleção recorrente recíproca foi eficiente em produzir híbridos S1xS1 superiores aos S0xS0.

Use of LIDAR-based Elevation Data for Highway Drainage Analysis: A Qualitative Assessment, 2003

US Geological Survey (USGS) based elevation data are the most commonly used data source for highway hydraulic analysis; however, due to the vertical accuracy of USGS-based elevation data, USGS data may be too “coarse” to adequately describe surface profiles of watershed areas or drainage patterns. Additionally hydraulic design requires delineation of much smaller drainage areas (watersheds) than other hydrologic applications, such as environmental, ecological, and water resource management. This research study investigated whether higher resolution LIDAR based surface models would provide better delineation of watersheds and drainage patterns as compared to surface models created from standard USGS-based elevation data. Differences in runoff values were the metric used to compare the data sets. The two data sets were compared for a pilot study area along the Iowa 1 corridor between Iowa City and Mount Vernon. Given the limited breadth of the analysis corridor, areas of particular emphasis were the location of drainage area boundaries and flow patterns parallel to and intersecting the road cross section. Traditional highway hydrology does not appear to be significantly impacted, or benefited, by the increased terrain detail that LIDAR provided for the study area. In fact, hydrologic outputs, such as streams and watersheds, may be too sensitive to the increased horizontal resolution and/or errors in the data set. However, a true comparison of LIDAR and USGS-based data sets of equal size and encompassing entire drainage areas could not be performed in this study. Differences may also result in areas with much steeper slopes or significant changes in terrain. LIDAR may provide possibly valuable detail in areas of modified terrain, such as roads. Better representations of channel and terrain detail in the vicinity of the roadway may be useful in modeling problem drainage areas and evaluating structural surety during and after significant storm events. Furthermore, LIDAR may be used to verify the intended/expected drainage patterns at newly constructed highways. LIDAR will likely provide the greatest benefit for highway projects in flood plains and areas with relatively flat terrain where slight changes in terrain may have a significant impact on drainage patterns.

Personality and personality disorders in urban and rural Africa: results from a field trial in Burkina Faso

When conducting research in different cultural settings, assessing measurement equivalence is of prime importance to determine if constructs and scores can be compared across groups. Structural equivalence implies that constructs have the same meaning across groups, metric equivalence implies that the metric of the scales remains stable across groups, and full scale or scalar equivalence implies that the origin of the scales is the same across groups. Several studies have observed that the structure underlying both normal personality and personality disorders (PDs) is stable across cultures. Most of this cross-cultural research was conducted in Western and Asian cultures. In Africa, the few studies were conducted with well-educated participants using French or English instruments. No research was conducted in Africa with less privileged or preliterate samples. The aim of this research was to study the structure and expression of normal and abnormal personality in an urban and a rural sample in Burkina Faso. The sample included 1,750 participants, with a sub-sample from the urban area of Ouagadougou (n = 1,249) and another sub-sample from a rural village, Soumiaga (n = 501). Most participants answered an interview consisting of a Mooré language adaptation of the Revised NEO Personality Inventory and of the International Personality Disorders Examination. Mooré is the language of the Mossi ethnic group, and the most frequently spoken local language in Burkina Faso. A sub-sample completed the same self-report instruments in French. Demographic variables only had a small impact on normal and abnormal personality traits mean levels. The structure underlying normal personality was unstable across regions and languages, illustrating that translating a complex psychological inventory into a native African language is a very difficult task. The structure underlying abnormal personality and the metric of PDs scales were stable across regions. As scalar equivalence was not reached, mean differences cannot be interpreted. Nevertheless, these differences could be due to an exaggerated expression of abnormal traits valued in the two cultural settings. Our results suggest that studies using a different methodology should be conducted to understand what is considered, in different cultures, as deviating from the expectations of the individual's culture, and as a significant impairment in self and interpersonal functioning, as defined by the DSM-5.

Métropolisation, morphologie urbaine et développement durable : transformations urbaines et régulation de l'étalement : le cas de l'agglomération lausannoise

Résumé Métropolisation, morphologie urbaine et développement durable. Transformations urbaines et régulation de l'étalement : le cas de l'agglomération lausannoise. Cette thèse s'inscrit clans la perspective d'une analyse stratégique visant à un définir et à expliciter les liens entre connaissance, expertise et décision politique. L'hypothèse fondamentale qui oriente l'ensemble de ce travail est la suivante : le régime d'urbanisation qui s'est imposé au cours des trente dernières années correspond à une transformation du principe morphogénétique de développement spatial des agglomérations qui tend à alourdir leurs bilans écologiques et à péjorer la qualité du cadre de vie des citadins. Ces enjeux environnementaux liés aux changements urbains et singulièrement ceux de la forme urbaine constituent un thème de plus en plus important dans la recherche de solutions d'aménagement urbain dans une perspective de développement durable. Dans ce contexte, l'aménagement urbain devient un mode d'action et une composante de tout premier ordre des politiques publiques visant un développement durable à l'échelle locale et globale. Ces modalités de développement spatial des agglomérations émergent indiscutablement au coeur de la problématique environnementale. Or si le concept de développement durable nous livre une nouvelle de de lecture des territoires et de ses transformations, en prônant le modèle de la ville compacte et son corollaire la densification, la traduction à donner à ce principe stratégique reste controversée, notamment sous l'angle de l'aménagement du territoire et des stratégies de développement urbain permettant une mise en oeuvre adéquate des solutions proposées. Nous avons ainsi tenté dans ce travail de répondre à un certain nombre de questions : quelle validité accorder au modèle de la ville compacte ? La densification est-elle une réponse adéquate ? Si oui, sous quelles modalités ? Quelles sont, en termes de stratégies d'aménagement, les alternatives durables au modèle de la ville étalée ? Faut-il vraiment densifier ou simplement maîtriser la dispersion ? Notre objectif principal étant in fine de déterminer les orientations et contenus urbanistiques de politiques publiques visant à réguler l'étalement urbain, de valider la faisabilité de ces principes et à définir les conditions de leur mise en place dans le cas d'une agglomération. Pour cela, et après avoir choisi l'agglomération lausannoise comme terrain d'expérimentation, trois approches complémentaires se sont révélées indispensables dans ce travail 1. une approche théorique visant à définir un cadre conceptuel interdisciplinaire d'analyse du phénomène urbain dans ses rapports à la problématique du développement durable liant régime d'urbanisation - forme urbaine - développement durable ; 2. une approche méthodologique proposant des outils d'analyse simples et efficaces de description des nouvelles morphologies urbaines pour une meilleure gestion de l'environnement urbain et de la pratique de l'aménagement urbain ; 3. une approche pragmatique visant à approfondir la réflexion sur la ville étalée en passant d'une approche descriptive des conséquences du nouveau régime d'urbanisation à une approche opérationnelle, visant à identifier les lignes d'actions possibles dans une perspective de développement durable. Cette démarche d'analyse nous a conduits à trois résultats majeurs, nous permettant de définir une stratégie de lutte contre l'étalement. Premièrement, si la densification est acceptée comme un objectif stratégique de l'aménagement urbain, le modèle de la ville dense ne peut être appliqué saris la prise en considération d'autres objectifs d'aménagement. Il ne suffit pas de densifier pour réduire l'empreinte écologique de la ville et améliorer la qualité de vie des citadins. La recherche d'une forme urbaine plus durable est tributaire d'une multiplicité de facteurs et d'effets de synergie et la maîtrise des effets négatifs de l'étalement urbain passe par la mise en oeuvre de politiques urbaines intégrées et concertées, comme par exemple prôner la densification qualifiée comme résultante d'un processus finalisé, intégrer et valoriser les transports collectifs et encore plus la métrique pédestre avec l'aménagement urbain, intégrer systématiquement la diversité à travers les dimensions physique et sociale du territoire. Deuxièmement, l'avenir de ces territoires étalés n'est pas figé. Notre enquête de terrain a montré une évolution des modes d'habitat liée aux modes de vie, à l'organisation du travail, à la mobilité, qui font que l'on peut penser à un retour d'une partie de la population dans les villes centres (fin de la toute puissance du modèle de la maison individuelle). Ainsi, le diagnostic et la recherche de solutions d'aménagement efficaces et viables ne peuvent être dissociés des demandes des habitants et des comportements des acteurs de la production du cadre bâti. Dans cette perspective, tout programme d'urbanisme doit nécessairement s'appuyer sur la connaissance des aspirations de la population. Troisièmement, la réussite de la mise en oeuvre d'une politique globale de maîtrise des effets négatifs de l'étalement urbain est fortement conditionnée par l'adaptation de l'offre immobilière à la demande de nouveaux modèles d'habitat répondant à la fois à la nécessité d'une maîtrise des coûts de l'urbanisation (économiques, sociaux, environnementaux), ainsi qu'aux aspirations émergentes des ménages. Ces résultats nous ont permis de définir les orientations d'une stratégie de lutte contre l'étalement, dont nous avons testé la faisabilité ainsi que les conditions de mise en oeuvre sur le territoire de l'agglomération lausannoise. Abstract This dissertation participates in the perspective of a strategic analysis aiming at specifying the links between knowledge, expertise and political decision, The fundamental hypothesis directing this study assumes that the urban dynamics that has characterized the past thirty years signifies a trans-formation of the morphogenetic principle of agglomerations' spatial development that results in a worsening of their ecological balance and of city dwellers' quality of life. The environmental implications linked to urban changes and particularly to changes in urban form constitute an ever greater share of research into sustainable urban planning solutions. In this context, urban planning becomes a mode of action and an essential component of public policies aiming at local and global sustainable development. These patterns of spatial development indisputably emerge at the heart of environmental issues. If the concept of sustainable development provides us with new understanding into territories and their transformations, by arguing in favor of densification, its concretization remains at issue, especially in terms of urban planning and of urban development strategies allowing the appropriate implementations of the solutions offered. Thus, this study tries to answer a certain number of questions: what validity should be granted to the model of the dense city? Is densification an adequate answer? If so, under what terms? What are the sustainable alternatives to urban sprawl in terms of planning strategies? Should densification really be pursued or should we simply try to master urban sprawl? Our main objective being in fine to determine the directions and urban con-tents of public policies aiming at regulating urban sprawl, to validate the feasibility of these principles and to define the conditions of their implementation in the case of one agglomeration. Once the Lausanne agglomeration had been chosen as experimentation field, three complementary approaches proved to be essential to this study: 1. a theoretical approach aiming at definying an interdisciplinary conceptual framework of the ur-ban phenomenon in its relation to sustainable development linking urban dynamics - urban form - sustainable development ; 2. a methodological approach proposing simple and effective tools for analyzing and describing new urban morphologies for a better management of the urban environment and of urban planning practices 3. a pragmatic approach aiming at deepening reflection on urban sprawl by switching from a descriptive approach of the consequences of the new urban dynamics to an operational approach, aiming at identifying possible avenues of action respecting the principles of sustainable development. This analysis approach provided us with three major results, allowing us to define a strategy to cur-tail urban sprawl. First, if densification is accepted as a strategic objective of urban planning, the model of the dense city can not be applied without taking into consideration other urban planning objectives. Densification does not suffice to reduce the ecological impact of the city and improve the quality of life of its dwellers. The search for a more sustainable urban form depends on a multitude of factors and effects of synergy. Reducing the negative effects of urban sprawl requires the implementation of integrated and concerted urban policies, like for example encouraging densification qualified as resulting from a finalized process, integrating and developing collective forms of transportation and even more so the pedestrian metric with urban planning, integrating diversity on a systematic basis through the physical and social dimensions of the territory. Second, the future of such sprawling territories is not fixed. Our research on the ground revea-led an evolution in the modes of habitat related to ways of life, work organization and mobility that suggest the possibility of the return of a part of the population to the center of cities (end of the rule of the model of the individual home). Thus, the diagnosis and the search for effective and sustainable solutions can not be conceived of independently of the needs of the inhabitants and of the behavior of the actors behind the production of the built territory. In this perspective, any urban program must necessarily be based upon the knowledge of the population's wishes. Third, the successful implementation of a global policy of control of urban sprawl's negative effects is highly influenced by the adaptation of property offer to the demand of new habitat models satisfying both the necessity of urbanization cost controls (economical, social, environ-mental) and people's emerging aspirations. These results allowed us to define a strategy to cur-tail urban sprawl. Its feasibility and conditions of implementation were tested on the territory of the Lausanne agglomeration.

Adaptabilidade e estabilidade de populações de milho-pipoca relacionadas por ciclos de seleção

Os objetivos deste trabalho foram estimar os parâmetros de adaptabilidade e estabilidade em populações de milho-pipoca relacionadas por ciclos de seleção, inferir sobre a eficiência dos métodos de seleção pelos quais as populações foram obtidas e avaliar os efeitos da seleção sobre os parâmetros de adaptabilidade e estabilidade. Vinte e cinco populações e três testemunhas comerciais foram avaliadas em 14 ensaios realizados nos anos agrícolas de 2003/2004, 2004/2005, 2006/2007, 2008/2009 e 2009/2010, em sete locais. Utilizou-se o delineamento experimental de blocos completos ao acaso, com quatro repetições. Foram analisadas a capacidade de expansão, avaliada em forno de microondas e na pipocadora Metric Weight Volume Tester (MWVT), além da produtividade de grãos. Utilizou-se o método de adaptabilidade e estabilidade de Eberhart & Russell. Em geral, as populações base e melhoradas apresentaram previsibilidade de comportamento em resposta às variações de ambiente. A seleção pode provocar mudanças nos padrões de adaptabilidade e estabilidade, e as diferentes estratégias de seleção empregadas na obtenção das populações apresentaram eficiências semelhantes

Development of a Coldwater Benthic Index in Iowa

Benthic macroinvertebrate assemblages do not appear to differ as markedly between coldwater and warmwater streams (in Iowa, at least) as do fish assemblages, and to our knowledge no parallel evaluation of benthic macroinvertebrate communities in coldwater streams has been conducted. What is known is that many taxa are exclusively collected in coldwater environments and are considered “rare” in Iowa from a biogeographical perspective. While the warmwater BMIBI has generally proven to work well as a diagnostic tool for Iowa’s streams, the streams of Iowa’s Paleozoic Plateau tend to group in the “excellent” to “good” qualitative rating categories. The streams of this area tend to be more ecologically intact than other areas of the state; however, there are some artifacts of the current warmwater BMIBI (most specifically metric scoring related to watershed size) that skew IBI values higher. Our objective is to develop a Coldwater Benthic Index (CBI) which will provide a more accurate assessment of streams classified, or potentially classifiable, as coldwater.