Fault development and interaction in distributed strike-slip shear zones: an experimental approach

Analogue model experiments using both brittle and viscous materials were performed to investigate the development and interaction of strike-slip faults in zones of distributed shear deformation. At low strain, bulk dextral shear deformation of an initial rectangular model is dominantly accommodated by left-stepping, en echelon strike-slip faults (Riedel shears, R) that form in response to the regional (bulk) stress field. Push-up zones form in the area of interaction between adjacent left-stepping Riedel shears. In cross sections, faults bounding push-up zones have an arcuate shape or merge at depth. Adjacent left-stepping R shears merge by sideways propagation or link by short synthetic shears that strike subparallel to the bulk shear direction. Coalescence of en echelon R shears results in major, through-going faults zones (master faults). Several parallel master faults develop due to the distributed nature of deformation. Spacing between master faults is related to the thickness of the brittle layers overlying the basal viscous layer. Master faults control to a large extent the subsequent fault pattern. With increasing strain, relatively short antithetic and synthetic faults develop mostly between old, but still active master faults. The orientation and evolution of the new faults indicate local modifications of the stress field. In experiments lacking lateral borders, closely spaced parallel antithetic faults (cross faults) define blocks that undergo clockwise rotation about a vertical axis with continuing deformation. Fault development and fault interaction at different stages of shear strain in our models show similarities with natural examples that have undergone distributed shear.

High-pressure adsorption of supercritical gases on activated carbons: An improved approach based on the density functional theory and the bender equation of state

Adsorption of nitrogen, argon, methane, and carbon dioxide on activated carbon Norit R1 over a wide range of pressure (up to 50 MPa) at temperatures from 298 to 343 K (supercritical conditions) is analyzed by means of the density functional theory modified by incorporating the Bender equation of state, which describes the bulk phase properties with very high accuracy. It has allowed us to precisely describe the experimental data of carbon dioxide adsorption slightly above and below its critical temperatures. The pore size distribution (PSD) obtained with supercritical gases at ambient temperatures compares reasonably well with the PSD obtained with subcritical nitrogen at 77 K. Our approach does not require the skeletal density of activated carbon from helium adsorption measurements to calculate excess adsorption. Instead, this density is treated as a fitting parameter, and in all cases its values are found to fall into a very narrow range close to 2000 kg/m(3). It was shown that in the case of high-pressure adsorption of supercritical gases the PSD could be reliably obtained for the range of pore width between 0.6 and 3 run. All wider pores can be reliably characterized only in terms of surface area as their corresponding excess local isotherms are the same over a practical range of pressure.

Pore size characterization of mesoporous materials by a thermodynamic approach: A curvature-dependent solid-fluid potential

A thermodynamic analysis of nitrogen adsorption in cylindrical pores of MCM-41 and SBA-15 samples at 77 K is presented within the framework of the Broekhoff and de Boer (BdB) theory. We accounted for the effect of the solid surface curvature on the potential exerted by the pore walls. The developed model is in quantitative agreement with the non-local density functional theory (NLDFT) for pores larger than 2 tun. This modified BdB theory accounting for the Curvature Dependent Potential (CDP-BdB) was applied to determine the pore size distribution (PSD) of a number of MCM-41 and SBA-15 samples on the basis of matching the equilibrium theoretical isotherm against the adsorption branch of the experimental isotherm. In all cases investigated the PSDs determined with the new approach are very similar to those determined with the non-local density functional theory also using the same basis of matching of theoretical isotherm against the experimental adsorption branch. The developed continuum theory is very simple in its utilization, suggesting that CDP-BdB could be used as an alternative tool to obtain PSD for mesoporous solids from the analysis of adsorption branch of adsorption isotherms of any sub-critical fluids.

An approach to ontology for institutional facts in the semantic web

Refinement in software engineering allows a specification to be developed in stages, with design decisions taken at earlier stages constraining the design at later stages. Refinement in complex data models is difficult due to lack of a way of defining constraints, which can be progressively maintained over increasingly detailed refinements. Category theory provides a way of stating wide scale constraints. These constraints lead to a set of design guidelines, which maintain the wide scale constraints under increasing detail. Previous methods of refinement are essentially local, and the proposed method does not interfere very much with these local methods. The result is particularly applicable to semantic web applications, where ontologies provide systems of more or less abstract constraints on systems, which must be implemented and therefore refined by participating systems. With the approach of this paper, the concept of committing to an ontology carries much more force. (c) 2005 Elsevier B.V. All rights reserved.

Combined external-endonasal approach for complete excision of the lacrimal drainage apparatus

Purpose: The purpose of this study was to describe a new surgical technique for the complete excision of the lacrimal drainage apparatus (LDA) that combines external and endoscopic approaches. Methods: This study involved a noncomparative, retrospective chart review of the clinical and pathological findings of four patients presenting with LDA papillomas who underwent a combined open and endonasal excision of the lacrimal system. Results. Of the four patients, three were male. The mean age at referral was 41 years, and all cases were unilateral. Histopathology revealed two transitional cell papillomas, one squamous cell papilloma, and one combined transitional/squamous papilloma. Epiphora and an external lesion were the main complaints at presentation. Nasolacrimal duct obstruction was present in all four patients. Papilloma virus infection was suggested in two cases and was confirmed in the only patient who had recurrence. CT identified a solid enhancing mass in two cases. The surgical approach in all cases was performed with the patient under general anesthetic supplemented with infiltration of local anesthesia with vasoconstriction. The lacrimal sac was exposed as per an external dacryocystorhinostomy with biopsy collection from the lacrimal sac lumen to confirm the diagnosis prior LDA excision. The superior aspect of the LDA was isolated by using lacrimal probes in each canaliculus to stabilized parallel incisions and careful dissection toward the common canaliculus until they met the medial aspect of the lacrimal sac. The sac was then separated from the periosteum from the medial orbital wall, using sharp dissection. Finally, an endoscopic dissection of the lower end of the nasolacrimal duct released the most inferior aspect of the LDA, allowing the surgeon to pull and excise the complete system from the external wound. Conclusions: Extensive LDA papillomas required complete excision of the drainage system to prevent recurrence and/or malignant transformation. The use of a combined approach through an open excision of the superior part of the LDA in conjunction with the direct manipulation of the nasolacrimal duct guided by the nasal endoscope facilitates the complete excision of the system for extensive benign lesions.

Improvements in the data partitioning approach for frequent itemsets mining

Frequent Itemsets mining is well explored for various data types, and its computational complexity is well understood. There are methods to deal effectively with computational problems. This paper shows another approach to further performance enhancements of frequent items sets computation. We have made a series of observations that led us to inventing data pre-processing methods such that the final step of the Partition algorithm, where a combination of all local candidate sets must be processed, is executed on substantially smaller input data. The paper shows results from several experiments that confirmed our general and formally presented observations.

Sustainable tourism planning: A content analysis of local tourism plans

Tourism planning has been advocated by many as a possible means of alleviating some of the negative impacts of tourism. While a number of approaches have evolved, tourism planning based on the philosophies of sustainability has emerged as the most comprehensive approaches. To investigate the tourism planning approaches of local tourism destinations in Queensland, particularly the extent to which tourism plans exhibit the sustainable approach to tourism planning, 30 local tourism planning documents have been reviewed. Despite claims that sustainable tourism planning is one of the most accepted approaches the study has shown that this is not necessarily the case in practice. It was found that although a number of plans addressed the issue of sustainability, the subsequent strategies and actions suggest that the sustainable approach is not the dominant planning approach, but in fact the economic and infrastructure approaches are the primary planning methods.

10,000 Steps Rockhampton: A Whole Community Approach to Increasing Levels of Physical Activity

10,000 Steps Rockhampton is a multi-strategy health promotion program which aims to develop sustainable community-based strategies to increase physical activity.The central coordinating focus of the project is the use of pedometers to raise awareness of and provide motivation for physical activity, around the theme of '10,000 steps/day - Every step counts.' To date, five key strategies have been implemented: (1) a media-based awareness raising campaign; (2) promotion of physical activity by health professionals; (3) improving social support for physical activity through group-based programs; (4) working with local council to improve environmental support for physical activity; and (5) establishment of a ‘micro-grants’ fund to which community groups could apply for assistance with small, innovative physical activity enhancing projects. Strategies were introduced on a rolling basis beginning in February 2002 with 'layering' of interventions designed to address the multi-level individual social and environmental determinants of physical activity. The project was quasi-experimental in design, involving collection of baseline and two year follow-up data from community based surveys in Rockhampton and in a matched regional Queensland town. In August 2001,the baseline CATI survey (N=1281)found that 47.9% of men and 33.0% of women were meeting the national guidelines for physical activity. In August 2002, a smaller survey (N=400) found an increase in activity levels among women (39.7% active) but not in men (48.5%). Data from the two year follow up survey, to be conducted in August 2003, will be presented, with discussion of the major successes and challenges of this landmark physical activity intervention. Acknowledgement: This project is supported by a grant from Health Promotion Queensland

Applying a Systems Approach to the Analysis of the Benefits of Conversion to Organic Production

Although the current level of organic production in industrialised countries amounts to little more than 1-2 percent, it is recognised that one of the major issues shaping agricultural output over the next several decades will be the demand for organic produce (Dixon et al. 2001). In Australia, the issues of healthy food and environmental concern contribute to increasing demand and market volumes for organic produce. However, in Indonesia, using more economical inputs for organic production is a supply-side factor driving organic production. For individual growers and processors, conversion from conventional to organic agriculture is often a challenging step, entailing a thorough revision of established practices and heightened market insecurity. This paper examines the potential for a systems approach to the analysis of the conversion process, to yield insights for household and community decisions. A framework for applying farming systems research to investigate the benefits of organic production in both Australia and Indonesia is discussed. The framework incorporates scope for farmer participation, crucial to the understanding of farming systems; analysis of production; and relationships to resources, technologies, markets, services, policies and institutions in their local cultural context. A systems approach offers the potential to internalise the external effects that may be constraining decisions to convert to organic production, and for the design of decision-making tools to assist households and the community. Systems models can guide policy design and serve as a mechanism for predicting the impact of changes to the policy and market environments. The increasing emphasis of farming systems research on community and environment in recent years is in keeping with the proposed application to organic production, processing and marketing issues. The approach will also facilitate the analysis of critical aspects of the Australian production, marketing and policy environment, and the investigation of these same features in an Indonesian context.

A constituição da representação no local de trabalho na região do Grande ABC

Este estudo visa pesquisar e compreender o fenômeno social da Representação dos Trabalhadores no Local de Trabalho na região do Grande ABC. Inicialmente, através de uma revisão de literatura, traçar um histórico da comissão de fábrica e organizações semelhantes pelo mundo, observando sua prática nestes países e abordando administração participativa e o socialismo europeu e a sua autodeterminação. Na sequência abordar a comissão de fábrica no Brasil, narrar a história da primeira comissão de fábrica oficial instalada no país, na fábrica da Ford em São Bernardo do Campo. Segue estudo de tabulação de pesquisa de campo efetuada, com ênfase aos seguintes aspectos: constata-se a prática da RLT pelas empresas; constitui-se a RLT através de empregados indicados pelos trabalhadores, empresas ou pelos sindicatos de trabalhadores; regulamenta-se a RLT através de estatuto; efetiva-se a participação e influência do sindicato dos trabalhadores na RLT; a quais interesses atende a RLT, empresas, sindicatos de trabalhadores ou trabalhadores. A metodologia a ser utilizada é qualitativa, seguida de pesquisa de campo realizada em grupo, com entrelaçamento destes dados com a experiência profissional do autor. A conclusão do estudo é que a RLT é pouco praticada, seus membros são indicados pelos trabalhadores e respectivos sindicatos, prevalece a RLT regulamentada, havendo participação e influência dos sindicatos de trabalhadores. A RLT atende prioritariamente aos interesses das empresas, seguido dos interesses dos sindicatos de trabalhadores e por último, os interesses dos trabalhadores.(AU)

Dynamical local models for segmentation and prediction of financial time series

In the analysis and prediction of many real-world time series, the assumption of stationarity is not valid. A special form of non-stationarity, where the underlying generator switches between (approximately) stationary regimes, seems particularly appropriate for financial markets. We introduce a new model which combines a dynamic switching (controlled by a hidden Markov model) and a non-linear dynamical system. We show how to train this hybrid model in a maximum likelihood approach and evaluate its performance on both synthetic and financial data.

A principled approach to interactive hierarchical non-linear visualization of high-dimensional data

Hierarchical visualization systems are desirable because a single two-dimensional visualization plot may not be sufficient to capture all of the interesting aspects of complex high-dimensional data sets. We extend an existing locally linear hierarchical visualization system PhiVis [1] in several directions: bf(1) we allow for em non-linear projection manifolds (the basic building block is the Generative Topographic Mapping -- GTM), bf(2) we introduce a general formulation of hierarchical probabilistic models consisting of local probabilistic models organized in a hierarchical tree, bf(3) we describe folding patterns of low-dimensional projection manifold in high-dimensional data space by computing and visualizing the manifold's local directional curvatures. Quantities such as magnification factors [3] and directional curvatures are helpful for understanding the layout of the nonlinear projection manifold in the data space and for further refinement of the hierarchical visualization plot. Like PhiVis, our system is statistically principled and is built interactively in a top-down fashion using the EM algorithm. We demonstrate the visualization system principle of the approach on a complex 12-dimensional data set and mention possible applications in the pharmaceutical industry.

An examination of the role of the concept of the community within the current reorganisation of English local government

The thesis will examine the role and impact of the concept of the community within the structural reorganisation of English local government between 1992 and 1995. The methodological approach adopted within this thesis has been to compare the use, application and significance of the community with a case study of a specific local authority and its preparations for reorganisation. The authority in question was Wychavon District Council located in the County of Hereford and Worcester. The conclusions from this case study were then compared to the role and significance of the community in the reviews of other local authorities in England. This study produced two important results. These were that there was an established body of literature which argued that the community could be of value to local government and that the community should be identified by measuring individuals sense of belonging and feelings of attachment, as well as such daily activities as shopping and working (which help to stimulate these feelings). The then Conservative Government even instructed the specially appointed Commission to apply this particular interpretation of the community to their reviews, and to attempt to base any new unitary authorities upon the social and spatial area it created. The Conservative Government also gave the Commission a Community Index to assist with the identification of communities, and appointed the pollsters MORI to support the Commission with the task of identifying the emotional and more subjective senses of community. The Commission eventually came to rely entirely on the MORI polls, and whilst these polls attempted to faithfully apply the Governments interpretation of the community, they unfortunately produced small and often complex communities, which the Commission felt could not be applied to its reviews. This therefore led to the community becoming a secondary consideration to the factors of cost and efficiency. Furthermore the problematic nature of the community - that is, the production of small and complex communities - was repeated in this thesis' own survey of community identities in the District of Wychavon. In fact this authority's proposals for reorganisation were based almost entirely upon the factors of cost, size and efficiency.

Modelling the relationship between local logistics management decisions and overall supply chain performance:A research agenda

Supply chains are advocated widely as being the new units for commercial competition and developments have made the sharing of supply chain wide information increasingly common. Most organisations however still make operational decisions intended to maximise local organisational performance. With improved information sharing a holistic focus for operational decisions should now be possible. The development of a pan supply chain performance framework requires an examination of the conditions under which holistic-decisions provide benefits to either the individual enterprise or the complete supply chain. This paper presents the background and supporting methodology for a study of the impact of an overall supply chain performance metric framework upon local logistics decisions and the conditions under which such a framework would improve overall supply chain performance. The methodology concludes a simulation approach using a functionally extended Gensym's e-SCOR model, together with case based triangulation, to be optimum. Copyright © 2007 Inderscience Enterprises Ltd.

Marking high-technology market evolution through the foci of market stories:the case of local area networks

Previous research suggests that changing consumer and producer knowledge structures play a role in market evolution and that the sociocognitive processes of product markets are revealed in the sensemaking stories of market actors that are rebroadcasted in commercial publications. In this article, the authors lend further support to the story-based nature of market sensemaking and the use of the sociocognitive approach in explaining the evolution of high-technology markets. They examine the content (i.e., subject matter or topic) and volume (i.e., the number) of market stories and the extent to which content and volume of market stories evolve as a technology emerges. Data were obtained from a content analysis of 10,412 article abstracts, published in key trade journals, pertaining to Local Area Network (LAN) technologies and spanning the period 1981 to 2000. Hypotheses concerning the evolving nature (content and volume) of market stories in technology evolution are tested. The analysis identified four categories of market stories - technical, product availability, product adoption, and product discontinuation. The findings show that the emerging technology passes initially through a 'technical-intensive' phase whereby technology related stories dominate, through a 'supply-push' phase, in which stories presenting products embracing the technology tend to exceed technical stories while there is a rise in the number of product adoption reference stories, to a 'product-focus' phase, with stories predominantly focusing on product availability. Overall story volume declines when a technology matures as the need for sensemaking reduces. When stories about product discontinuation surface, these signal the decline of current technology. New technologies that fail to maintain the 'product-focus' stage also reflect limited market acceptance. The article also discusses the theoretical and managerial implications of the study's findings. © 2002 Elsevier Science Inc. All rights reserved.