Ohjelmistoyrityksen tuoteliiketoiminnan ohjaaminen elinkaarimallin avulla

Nopeasti muuttuvissa kilpailutilanteissa varsinkin pienet ja keskisuuret ohjelmistoyritykset joutuvat kilpailuetuja saavuttaakseen tekemään strategisia päätöksiä, joiden vaikutukset voidaan todeta vasta pitkän ajan kuluttua. Sen vuoksi yritysjohto tarvitsee päätöksentekoa varten tukijärjestelmiä, jotka sekä tuottavat informaatiota päätöksenteon tueksi että auttavat vähentämään päätöksistä aiheutuneita riskejä. Tämän työn tavoitteena oli kehittää ohjelmistoyritysten ohjelmistotuoteliiketoimintaa varten elinkaarikustannusmalli, jonka avulla yritysjohto voi arvioida ohjelmistotuotteiden koko-naiskustannuksia koko elinkaaren ajalta. Elinkaarikustannusmallia tutkittiin sekä elinkaarikustannusten että ohjelmistotuotantoprosessien teoreettisissa viitekehyksissä. Empiirinen tieto kerättiin tutkimukseen osallistuneen ohjelmistoyrityksen avulla. Tutkimuksessa kehitetty elinkaarikustannusmalli eroaa monista muista tutkituista kustannusmalleista siinä, että se lähestyy elinkaarikustannusten problematiikkaa strategisesta näkökulmasta, kun taas monet muut mallit toteuttavat tietoteknistä lähestymistapaa. Siten ohjelmistoyrityksen johto voi ohjata tuoteliiketoimintaa osana strategista päätöksentekoa sekä tuotteen elinkaaren kokonaiskustannusten avulla että elinkaarikustannusmallin epäsuorien vaikutusten kautta

Sähkösuodattimen mahdollisuudet sisäilman parantajana

Diplomityön tavoitteena oli selvittää, kuinka sähkösuodattimella voidaan vaikuttaa sisäilman laatuun ja kuinka kilpailukykyinen vaihtoehto pienkiinteistöissä sähkösuodatin on perinteisiin kuitusuodattimiin verrattuna. Teoriaosassa tarkasteltiin, kuinka ilman hengitettävät hiukkaset muodostuvat ja miten ne vaikuttavat sisäilman laatuun sekä ihmisten terveyteen. Tarkasteltiin hiukkasten koon, lukumäärän, massan ja pinta-alan yhteyksiä niiden terveysvaikutuksiin. Ultrapienet hiukkaset ovat terveydelle haitallisimpia, koska hiukkasten lukumäärä ja pinta-ala lisäävät terveyshaittoja enemmän kuin hiukkasten massa. Tutkittiin pienkiinteistöjen ilmanvaihtoratkaisuja ja erilaisia tuloilmanpuhdistus-menetelmiä. Soveltavassa osassa tarkasteltiin sähkösuodattimen toimintaa ja sen mahdollisuuksia sisäilman parantajana verrattuna perinteisiin kuitusuodattimiin. Tehtiin sähkösuodattimen ja kuitusuodattimen välinen elinkaarikustannusvertailu keskisuurelle omakotitalolle. Kirjallisuuden ja tutkimushavaintojen perusteella sähkösuodattimen suurin etu muihin suodattimiin verrattuna on sen kyky poistaa kaiken kokoisia, myös ultrapieniä, hengitettäviä hiukkasia ja siten tehokkaasti vähentää hengitettävien hiukkasten lukumäärää ja pinta-alaa. Tällä voi olla vaikutusta yleisten terveyshaittojen ja ympäristöherkkyyden ennaltaehkäisemisessä. Ympäristöherkkyyteen sairastuneiden oireiluun sähkösuodatin voi tuottaa helpotusta kotioloissa ja siirrettävän ilmanpuhdistimen avulla myös työpaikoilla. Elinkaarikustannusvertailun perusteella selvisi, että sähkösuodatin on kalliimmasta hinnastaan huolimatta kokonaiskustannuksiltaan selvästi edullisempi vaihtoehto kuin kuitusuodattimet. Sähkösuodattimen haasteena on uuden teknologian lanseeraaminen pientalorakentamiseen. Pienrakennusten tuloilman puhdistusmenetelmien kehittämisellä olisi mahdollista parantaa suomalaisten elämänlaatua ja saavuttaa merkittäviä säästöjä terveydenhoitokuluissa.

The need of sustainable buildings construction in the Kingdom of Bahrain

This thesis is aimed to initiate implementing sustainable building construction in the kingdom of Bahrain, i.e. Building-Integration PhotoVoltaic (BIPV) or Wind Energy (BIWE). It highlights the main constrains that discourage such modern concept in building and construction. Three groups have been questioned using a questionnaire. These are the policy and decision makers, the leading consultants and the contractors. The main constrains of the dissemination of BIVP and BIWE, according to the policy and decision makers, are: lack of knowledge and awareness of the public in sustainable technology, low cost of electricity, low cost of gas and oil and difficulty in applying local environmental taxes. The consultants had attributed the constrains to ignorance of life cycle cost of PV and Wind turbines systems, lack of education and knowledge in sustainable design, political system, shortage of markets importing sustainable technologies and client worries in profitability and pay-back period. The contractors are found to be very enthusiastic and ready to take over any sustainable building project and prefer to have a construction manger to coordinate between the design and contracting team. Design and Build is found the favorable procurement method in Bahrain for conducting BIPV or BIWE projects.

A system's model for maintenance support and decision making in building services systems

Modern buildings are designed to enhance the match between environment, spaces and the people carrying out work, so that the well-being and the performance of the occupants are all in harmony. Building services are systems that facilitate a healthy working environment within which workers productivity can be optimised in the buildings. However, the maintenance of these services is fraught with problems that may contribute to up to 50% of the total life cycle cost of the building. Maintenance support is one area which is not usually designed into the system as this is not common practice in the services industry. The other areas of shortfall for future designs are; client requirements, commissioning, facilities management data and post occupancy evaluation feedback which needs to be adequately planned to capture and document this information for use in future designs. At the University of Reading an integrated approach has been developed to assemble the multitude of aspects inherent in this field. The means records required and measured achievements for the benefit of both building owners and practitioners. This integrated approach can be represented in a Through Life Business Model (TLBM) format using the concept of Integrated Logistic Support (ILS). The prototype TLBM developed utilises the tailored tools and techniques of ILS for building services. This TLBM approach will facilitate the successful development of a databank that would be invaluable in capturing essential data (e.g. reliability of components) for enhancing future building services designs, life cycle costing and decision making by practitioners, in particular facilities managers.

Comparação entre métodos de dimensionamento de dutos de sistemas de RVAC

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Runoff Water Quality and Pollutant Mass Loads From Extensive Green Roofs

Green roof mitigation of volume and peak flow-rate of stormwater runoff has been studied extensively. However, due to the common practice of green roof fertilization, there is the potential for introduction of nutrients into local bodies of water. Therefore, this study compares green roof runoff quality with the water quality of precipitation and runoff from a bare shingle roof. The runoff from a demonstration-scale extensive green roof was analyzed during the summer of 2011 for its effect on runoff volume and analyzed during eleven storm events in the fall and winter for concentrations of copper, cadmium, zinc, lead, nitrogen species, total nitrogen, total organic carbon, sulfate, orthophosphate, and other monovalent and divalent ions. The green roof reduced the overall volume of runoff and served as a sink for NO3 - and NH4 +. However, the green roof was also a source for the pollutants PO4 3-, SO4 2-, TOC, cations, and total nitrogen. Metals such as zinc and lead showed trends of higher mass loads in the bare roof runoff than in precipitation and green roof runoff, although results were not statistically significant. The green roof also showed trends, although also not statistically significant, of retaining cadmium and copper. With the green roof serving as a source of phosphorous species and a sink for nitrogen species, and appearing to a retain metals and total volume, the life cycle impact analysis shows minimum impacts from the green roof, when compared with precipitation and bare roof runoff, in all but fresh water eutrophication. Therefore, the best environments to install a green roof may be in coastal environments.

Measuring dynamic effects on underpasses of high-speed railway lines

Underpasses are common in modern railway lines. Wildlife corridors and drainage conduits often fall into this category of partially buried structures. Their dynamic behaviour has received far less attention than that of other structures such as bridges, but their large number makes their study an interesting challenge in order to achieve safe and cost-effective structures. As ballast operations are a key life cycle cost, and excessive vibrations increase the need of ballast regulation in order to ensure track geometry, special attention is paid to accelerations, the values of which should be limited to avoid track instability according to Eurocode. In this paper, the data obtained during on site measurements on culverts belonging to a Spanish high-speed train line are presented. A set of six rectangular-shaped, closed-frame underpasses were monitored under traffic loading. Acceleration records at different points of the structures are presented and discussed. They reveal a non-uniform dynamic response of the roof-slab, with the highest observed values below the occupied track. Also, they indicate that the dynamic response is important up to frequencies higher than those usually observed for standard simply supported bridges. Finally, they are used to obtain a heuristic rule to estimate acceleration levels on the roof-slab.

Improving manufacturing performance by standardization of interprocess communication

A number of environmental forces such as increasing value chain network complexity, decreasing product life-cycle cost, and time-to-market requirements or increasing product complexity act upon manufacturing organizations, enhancing the acute need for organizational routines that foster efficient and effective communication between processes. Such organizational routines erode quickly in the absence of common standards for knowledge sharing, that is why successful manufacturing systems benefit from interprocess standardization. The purpose of this paper is to offer a standardization model of interprocess communication that increases manufacturing operational performance (MOP). First, we propose a novel holistic model that makes standardized interprocess communication possible in manufacturing organizations. Second, we propose a model for quantifying the implications of standardizing interprocess communication upon MOP. Finally, as a matter of application, we show the results of its successful implementation in one Japanese manufacturing organization.

Análisis y propuesta de metodologías para la normalización de los informes de evaluación ambiental que permita la gestión, documentación y participación social

El desarrollo de la Ingeniería Civil en el siglo XXI debe estar dirigido a proporcionar de forma simultánea tanto las necesidades funcionales del proyecto como la conservación y sostenibilidad del territorio. Para que este proceso se pueda realizar de forma eficiente debe integrarse a los promotores (públicos y privados), a la administración y a los ciudadanos y sus asociaciones en el mecanismo de gestión y documentación del proyecto. Las directrices de la Unión Europea y el nuevo marco legislativo actual (Ley 21/2013) está orientado en esta dirección, pero las herramientas que estamos utilizando en este momento no cumplen adecuadamente estas necesidades. La norma UNE 157921:2006 y sucesivas debería renovarse contemplando tanto el nuevo marco legislativo como sobre todo la nueva realidad tecnológica para la gestión de la documentación técnica y científica mediante los lenguajes extensibles, la integración de bases de datos, las herramientas de participación social y las herramientas de protección y conservación del territorio todo ello a lo largo del ciclo de vida del proyecto En esta tesis vamos a presentar los trabajos que estamos realizando de análisis y propuesta de metodologías para la normalización de los informes de evaluación ambiental. que permita la gestión, documentación y participación social ABSTRACT The development of Civil Engineering in the XXI century should be leading towards a simultaneous sustenance of both the functional needs of the project, and the conservation and sustainability of the territory. Public and private promoters should collaborate with administration, citizens and their associations in the management mechanism and project documentation, in order to perform this process efficiently. The guidelines of the European Union and the current legislative framework (Law 21/2013) are oriented towards this, but the tools which are being used at the moment do not adequately meet the mentioned needs. The UNE 157921: 2006 and successive should be renewed in order to contemplate both the new legislative framework and the new technological reality for the management of technical and scientific documentation by the extensible languages, integration of databases, tools of social participation and tools protection and conservation of land all along the project life cycle. The analysis and proposal of different methodologies for the standardisation of environmental assessment reports, which admits for the correct management, documentation and social participation, will be presented in this paper.

Lebenszykluskosten von elektrischen Antriebssystemen

Insbesondere bei Antriebssystemen stehen die Energiekosten neben den Anschaffungskosten im Fokus. Jedoch bleiben weitere Folgekosten, die im Laufe des Betriebs eines Antriebssystems in einem Fördermittel entstehen, meist unberücksichtigt. Dieser Artikel beschreibt einen Ansatz, wie sich Lebenszykluskosten von Antriebssystemen in Stetigfördertechnik prognostizieren lassen. Mit Hilfe von allgemein bekannten Normen und Richtlinien kann der Lebenszyklus eines Antriebssystems von der Projektierung über die Herstellung bis zur Entsorgung nach dem Betrieb in Kostenarten eingeteilt und veranschaulicht werden. Unter Verwendung von direkter Verrechnung als auch der Kalkulation mit Prozesskosten wird eine hinreichende Genauigkeit anhand definierter Prozessketten erreicht. Auf Basis dieser Kostenkalkulationen kann ein mehrstufiges Prognosemodell gebildet werden. Somit konnten durch das entwickelnde Modell Anlagenbeispiele untersucht und berechnet werden.

Metodi e strumenti di Facilty Management: una proposta di integrazione tra Piano di Manutenzione e Fascicolo dell’Opera nel caso della Grande Distribuzione Organizzata

Gli ultimi 10 anni hanno visto un crescente aumento delle richieste di fornitura di servizi legati alla manutenzione edilizia da parte della Grande Distribuzione Organizzata; la domanda è quella di servizi riconducibili al Facility Management, ovvero rapporti basati sul raggiungimento di standard qualitativi predefiniti in sede contrattuale e garanzia di intervento 24h/24. Nella prima parte del progetto di tesi viene inquadrata la disciplina del FM, le motivazioni, gli strumenti e gli attori coinvolti. Dopo un excursus normativo sulla manutenzione in Italia, una classificazione delle tipologie di intervento manutentivo e una valutazione sull’incidenza della manutenzione nel Life Cycle Cost, viene effettuata un’analisi delle modalità interoperative del FM applicato alla manutenzione edilizia nel caso della GDO. La tesi è stata svolta nell'ambito di un tirocinio in azienda, il che ha permesso alla laureanda di affrontare il caso di studio di un contratto di Global Service con un’importante catena di grande distribuzione, e di utilizzare un software gestionale (PlaNet) con il quale viene tenuta traccia, per ogni punto vendita, degli interventi manutentivi e della loro localizzazione nell’edificio. Questo permette di avere un quadro completo degli interventi, con modalità di attuazione già note, e garantisce una gestione più efficace delle chiamate, seguite tramite un modulo di Call Center integrato. La tesi esamina criticamente i principali documenti di riferimento per l’opera collegati alla manutenzione: il Piano di Manutenzione e il Fascicolo dell’Opera, evidenziando i limiti legati alla non completezza delle informazioni fornite. L’obbiettivo finale della tesi è quello di proporre un documento integrativo tra il Piano di Manutenzione e il Fascicolo, al fine di snellire il flusso informativo e creare un documento di riferimento completo ed esaustivo, che integra sia gli aspetti tecnici delle modalità manutentive, sia le prescrizioni sulla sicurezza.

Building Information Modeling e Maintenance Management: il caso del Pro-GET-onE

La tesi ha come obiettivo quello di analizzare l’evoluzione del settore della manutenzione edilizia e del cambiamento della politica manutentiva in relazione ai progressi portati dai nuovi strumenti informatici: facendo quindi riferimento ad uno specifico caso di studio e integrando l’utilizzo di software BIM, lo scopo è stato quello di programmare un life cycle adeguato. La prima parte della tesi delinea il cambiamento del quadro normativo dell’ambito della manutenzione e definisce lo stato dell’arte della pratica manutentiva, sia dal punto di vista tecnico e applicativo, ma anche da quello gestionale ed economico, con particolare riferimento al Maintenance Management. Nella seconda parte viene invece approfondito il caso studio di uno studentato di Atene facente parte del programma ProGETonE, definendo gli elementi che possono portare ad una corretta gestione del ciclo di vita di questo fabbricato: l’analisi parte da un approccio tradizionale, basato sul computo metrico e sulla PBS, ma si sviluppa e completa attraverso l’utilizzo di Revit e Mantus-P, con la relativa stesura finale di un piano di manutenzione. Questo processo ha portato ad evidenziare le differenze e i vantaggi che si possono trarre dal cambio di prospettiva e di strumenti nell’ambito della manutenzione edilizia.

Multi-performance assessment of a masonry building with a sustainable RC-Framed Skin

Questa tesi si propone di fornire un approccio multidisciplinare per la valutazione delle prestazioni di una tipologia di intervento sostenibile che consiste in un telaio in calcestruzzo armato (RCFramed skin) per la ristrutturazione integrata di edifici esistenti. Viene fornita una descrizione preliminare di tale tecnologia, con particolare attenzione al miglioramento simultaneo delle prestazioni strutturali (sismiche), non strutturali (energetiche) e alle questioni relative alla limitazione dell'invasività e dell'interruzione dell'uso della costruzione. La valutazione delle prestazioni dell'edificio nelle configurazioni pre e post intervento è effettuata, principalmente in termini di capacità sismica, ma anche del comportamento termo-igrometrico. In particolare, i benefici ottenuti sia dal punto di vista strutturale che energetico sono valutati con riferimento a tre diverse città appartenenti a tre differenti zone sismiche e climatiche. La fattibilità e la sostenibilità dell'intervento di adeguamento proposto sono indagate attraverso una valutazione LCA(Life Cycle Assessment) per l'impatto ambientale e LCC(Life Cycle Cost) per l’analisi economica. Infine, viene proposto un metodo per facilitare la selezione della soluzione di intervento ottimale per ogni sito, combinando l'aspetto strutturale con quello energetico, di impatto ambientale ed economico.

Municipal solid waste management system: decision support through systems analysis

Thesis submitted to the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia for the degree of Doctor of Philosophy in Environmental Engineering

Should we await IFN-free regimens to treat HCV genotype 1 treatment-naive patients? A cost-effectiveness analysis (ANRS 95141).

BACKGROUND & AIMS: In treatment-naive patients mono-infected with genotype 1 chronic HCV, treatments with telaprevir/boceprevir (TVR/BOC)-based triple therapy are standard-of-care. However, more efficacious direct-acting antivirals (IFN-based new DAAs) are available and interferon-free (IFN-free) regimens are imminent (2015). METHODS: A mathematical model estimated quality-adjusted life years, cost and incremental cost-effectiveness ratios of (i) IFN-based new DAAs vs. TVR/BOC-based triple therapy; and (ii) IFN-based new DAAs initiation strategies, given that IFN-free regimens are imminent. The sustained virological response in F3-4/F0-2 was 71/89% with IFN-based new DAAs, 85/95% with IFN-free regimens, vs. 64/80% with TVR/BOC-based triple therapy. Serious adverse events leading to discontinuation were taken as: 0-0.6% with IFN-based new DAAs, 0% with IFN-free regimens, vs. 1-10% with TVR/BOC-based triple therapy. Costs were euro60,000 for 12weeks of IFN-based new DAAs and two times higher for IFN-free regimens. RESULTS: Treatment with IFN-based new DAAs when fibrosis stage ⩾F2 is cost-effective compared to TVR/BOC-based triple therapy (euro37,900/QALY gained), but not at F0-1 (euro103,500/QALY gained). Awaiting the IFN-free regimens is more effective, except in F4 patients, but not cost-effective compared to IFN-based new DAAs. If we decrease the cost of IFN-free regimens close to that of IFN-based new DAAs, then awaiting the IFN-free regimen becomes cost-effective. CONCLUSIONS: Treatment with IFN-based new DAAs at stage ⩾F2 is both effective and cost-effective compared to TVR/BOC triple therapy. Awaiting IFN-free regimens and then treating regardless of fibrosis is more efficacious, except in F4 patients; however, the cost-effectiveness of this strategy is highly dependent on its cost.