Weed-soybean interference studies in Brazil

Recently, a notable shift in weed patterns has occurred in some soybean growing regions, as a result of tillage system change and herbicide use. The weed communities are very diversified and strongly interfere with soybean growth and productivity, especially when the shading of superior leaves of the canopy occurs. Some changes to certain agricultural practices, such as cultivars, row spacing and sowing density, were studied and were considered suitable for the establishment of an integrated weed management system under Brazilian conditions. -from Author

Interference competition between ants (Hymenoptera: Formicidae) in Amazonian clearings

The first case of interference competition through soil dumping in South America is documented between Ectatomma quadridens and Pheidole fallax in Amazonian forest clearings. Workers of the diurnally active E. quadridens arrive at nests of P. fallax at dawn, and begin to fill up nest entrances with soil. During the day, E. quadridens workers remain stationary on the closed nest of P. fallax, and fill soil at the first signs of nest openings. Colonies of P. fallax distant from E. quadridens nests are active for 24 hrs; those near E. quadridens nests are limited for foraging nocturnally after opening nest entrances. This pattern was not found between heterospecific colonies at greater distances from the camp midden, according with the prediction that interference competition is more probable as resources become more concentrated. Colonies of P. fallax near E. quadridens nests located near the camp midden had a net forage intake of 60% of those located in areas without E. quadridens. -Author

Interference of the blood clot on granulation tissue formation after tooth extraction. Histomorphological study in rats.

The interference of a blood clot in the first postoperative hours of dental extraction wounds was studied in rats. Sixty male albino rats were divided into two groups: Group I, immediately after extraction of right maxillary incisor the gingival mucosa was approximated and sutured; Group II, after 6 to 8 minutes postoperatively the blood clot was removed with saline irrigation and absorbent paper cones. The mucosa was then approximated and sutured. Six animals in each group were sacrificed after 12 hours, 1, 4, 7 and 10 days. There was a profound delay in healing in Group II since, although a new blood clot was later formed, it was not organized. The quality and the constitution, maintenance and retraction of the clot are the regulating factors in connective tissue formation during alveolar healing.

Interference competition and scavenging by Crematogaster ants (Hymenoptera: Formicidae) associated with the webs of the social spider Anelosimus eximius (Araneae: Theridiidae) in the central Amazon

Crematogaster cf. victima is a common inhabitant in the sheet web nests of the social spider Anelosimus eximius in the central Amazon basin near Manaus. A number of other ant species were found foraging on the non-sticky webs of A. eximius, but none of these reached the web occupation frequency found in C. cf. victima, nor, with the exception of an unidentified species of Pheidole, did they form satellite nests in the web, as did this species. Many prey which escaped the knock-down threads of the sheet web of A. eximius colonies were captured by ants in the lower web portions which they dominated. Furthermore, prey which were rejected by A. eximius, especially large, heavily sclerotized beetles, were also consumed by this ant. Repeated observations and experiments suggest that C. cf. victima is able to deter A. eximius activity through aerial venom release. Resources lost by A. eximius colonies to ants, especially C. cf. victima, in colonial web area and prey, may pose significant costs and may reduce colony growth.

Interference phenomenon for the Faddeevian regularization of 2D chiral fermionic determinants

The classification of the regularization ambiguity of a 2D fermionic determinant in three different classes according to the number of second-class constraints, including the new Faddeevian regularization, is examined and extended. We find a new and important result that the Faddeevian class, with three second-class constraints, possesses a free continuous one parameter family of elements. The criterion of unitarity restricts the parameter to the same range found earlier by Jackiw and Rajaraman for the two-constraint class. We studied the restriction imposed by the interference of right-left modes of the chiral Schwinger model (χQED2) using Stone's soldering formalism. The interference effects between right and left movers, producing the massive vectorial photon, are shown to constrain the regularization parameter to belong to the four-constraint class which is the only nonambiguous class with a unique regularization parameter. ©1999 The American Physical Society.

Interference phenomena, chiral bosons, and Lorentz invariance

We have studied the theory of gauged chiral bosons and proposed a general theory, a master action, that encompasses different kinds of gauge field couplings in chiral bosonized theories with first-class chiral constraints. We have fused opposite chiral aspects of this master action using the soldering formalism and applied the final action to several well-known models. The Lorentz rotation permitted us to fix conditions on the parameters of this general theory in order to preserve the relativistic invariance. We also have established some conditions on the arbitrary parameter concerned in a chiral Schwinger model with a generalized constraint, investigating both covariance and Lorentz invariance. The results obtained supplement the one that shows the soldering formalism as a new method of mass generation. ©2001 The American Physical Society.

Reciprocal interference between ants and stingless bees attending the honeydew-producing homopteran Aetalion reticulatum (Homoptera: Aetalionidae)

We evaluated the reciprocal effects between foragers of the ants Camponotus crassus and of the stingless bees Trigona hyalinata on aggregations of the honeydew-producing treehopper Aetalion reticulatum. The interactions were observed in Bauhinia variegata (Caesalpiniaceae) and Mangifera indica (Anacardiaceae) trees. We recorded the presence/absence of each attendant species in homopteran aggregations to test if the observed co-occurrence is lower than that expected by chance. An exclusion experiment was performed in which each attendant species was excluded from aggregations in order to test if an attendant species is more likely to occupy aggregations where the other attendant is not present. We also recorded the number of individuals of each attendant species in homopteran aggregations to search for any correlation between homopteran and attendant abundances. Additionally, we performed experiments using termites (Termitidae, Isoptera) as models to verify if the attendant species have the potential to defend A. reticulatum against natural enemies. The co-occurrence of attendant species was lower than that expected by chance. Homopteran aggregations without stingless bees were more visited by ants than those in which T. hyalinata was present, and vice-versa. The abundance of stingless bees was proportional to homopteran abundance, while ants abundance was not correlated to homopteran abundance. Both attendant species attacked the natural enemies models when we glued the termites ca. 1 cm away from homopteran aggregations, but only ants removed termites glued 5-7 cm away from aggregations. We suggest that the effects of non-formicid attendants should be included as another factor influencing the costs and benefits of ant-homopteran interactions, since honeydew availability for ants also depends on the presence and behavior of interspecific attendants.

Interference of epicuticular wax from leaves of grasses in selection and preparation of substrate for cultivation of symbiont fungus by Atta capiguara (Hym. Formicidae)

The selection of plants is one of the stages of foraging behavior, executed by leaf-cutting ants for the cultivation of symbiont fungus. Anatomical, biochemical and physiological characteristics of vegetal species are some of the factors that influence selection of substrate; however, most studies described in the literature refer to leaf-cutting ants. Due to the scarcity of studies on the role of epicuticular waxes of grasses in relation to foraging behavior of monocotyledonous leaf-cutters, we completed three experiments with the ant species Atta capiguara in which we analyzed: the attractiveness or selectivity of leaves of Saccharum officinarum (sugarcane) and/or Hypharrenia rufa (capim jaraguá), with and without epicuticular wax in relation to the worker of this ant species, their processing and elimination in the form of pellets of epicuticular wax from the referred fragments removed by the workers for cultivation of symbiont fungus. We observed that vegetal fragments without wax were those most transported by workers to the inside of the nests; that they processed the fragments equally with as much as without wax, and eliminated, in the form of pellets, wax removed from the same into garbage chambers of the colonies, leading us to conclude that for monocotyledonous leaf-cutters, epicuticular wax from vegetal leaves has great importance in vegetal integrity by being used as substrate, representing a physical barrier to the growth of symbiont fungus.

Background interference on the color of dental composite materials with different thickness by digital contrast

In this work the color dependence of resin composites with the background color was evaluated. The objective was to measure since what thickness the color of the sample stops being influenced by the color of the background over which the resin is placed and the methodology used in experiment was based in analyzing the contrast of digital images of the sample over a black background. The results shown that since 0.8 mm the images contrast becomes almost constant; it prove that since this thickness the color of resin composite depends on the optical resin properties only. The experiment was repeated under three conditions of luminosity to evaluate the influence of it on the image contrast and the results obtained were identical.

Plasmonic structures fabricated by interference lithography for sensor applications

In this work we demonstrate the use of holographic lithography for generation of large area plasmonic periodic structures. Submicrometric array of holes, with different periods and thickness, were recorded in gold films, in areas of about 1 cm2, with homogeneity similar to that of samples recorded by Focused Ion Beam. In order to check the plasmonic properties, we measured the transmission spectra of the samples. The spectra exhibit the typical surface plasmon resonances (SPR) in the infrared whose position and width present the expected behavior with the period of the array and film thickness. The shift of the peak position with the permittivity of the surrounding medium demonstrates the feasebility of the sample as large area sensors. © 2009 SPIE.

Bandgap voltage reference with low susceptibility to electromagnetic interference (EMI)

In this paper, the susceptibility of a current-mode bandgap voltage reference to electromagnetic interference (EMI) superimposed to the power supply is investigated by simulation. Designed for AMS 0.35 CMOS process, the circuit provides a stable voltage reference in the temperature range of -40-150°C. When EMI disturbances are present, the circuit exhibits only 6.7 mV of offset for interfering signals in the frequency range of 150 kHz-1 GHz. © 2011 ACM.

Effect of microthread presence and restoration design (screw versus cemented) in dental implant reliability and failure modes

Objectives: This study evaluated the reliability and failure modes of implants with a microthreaded or smooth design at the crestal region, restored with screwed or cemented crowns. The postulated null hypothesis was that the presence of microthreads in the implant cervical region would not result in different reliability and strength to failure than smooth design, regardless of fixation method, when subjected to step-stress accelerated life-testing (SSALT) in water. Materials and methods: Eighty four dental implants (3.3 × 10 mm) were divided into four groups (n = 21) according to implant macrogeometric design at the crestal region and crown fixation method: Microthreads Screwed (MS); Smooth Screwed (SS); Microthreads Cemented (MC), and Smooth Cemented (SC). The abutments were torqued to the implants and standardized maxillary central incisor metallic crowns were cemented (MC, SC) or screwed (MS, SS) and subjected to SSALT in water. The probability of failure versus cycles (90% two-sided confidence intervals) was calculated and plotted using a power law relationship for damage accumulation. Reliability for a mission of 50,000 cycles at 150 N (90% 2-sided confidence intervals) was calculated. Differences between final failure loads during fatigue for each group were assessed by Kruskal-Wallis along with Benferroni's post hoc tests. Polarized-light and scanning electron microscopes were used for failure analyses. Results: The Beta (β) value (confidence interval range) derived from use level probability Weibull calculation of 1.30 (0.76-2.22), 1.17 (0.70-1.96), 1.12 (0.71-1.76), and 0.52 (0.30-0.89) for groups MC, SC, MS, and SS respectively, indicated that fatigue was an accelerating factor for all groups, except for SS. The calculated reliability was higher for SC (99%) compared to MC (87%). No difference was observed between screwed restorations (MS - 29%, SS - 43%). Failure involved abutment screw fracture for all groups. The cemented groups (MC, SC) presented more abutment and implant fractures. Significantly higher load to fracture values were observed for SC and MC relative to MS and SS (P < 0.001). Conclusion: Since reliability and strength to failure was higher for SC than for MC, our postulated null hypothesis was rejected. © 2012 John Wiley & Sons A/S.

The effect of locked screw angulation on the biomechanical properties of the S.P.S. Free-Block plate

Objectives: Among the locked internal fixators is one denominated S.P.S. (Synthesis Pengo System) Free-Block, which was designed with a locking ring that allows the screw to be locked and positioned obliquely. Due to the paucity of biomechanical studies on this system, the present work aimed to evaluate the influence of locked screw angulation on the resistance of the S.P.S. Free--Block plate. Methods: Forty synthetic bone cylinders with 10 mm fracture gap were used. Forty seven-hole 3.5 mm stainless steel plates (two AO-like dynamic compression holes and five locked holes) were assembled according to the orientation of the locked screws: mono cortical screws were positioned at 90° to the long axis of the cylinder (Group 1), and monocortical screws were positioned at 70° to its cylinder long axis (Group 2). In both groups, AO-like dynamic compression hole screws were positioned bicortically and neutrally. For each group, six specimens were tested until failure, three in bending and three in compression, to determine the loads for fatigue testing. Subsequently, for each group, 14 specimens were tested for failure --seven by bending and seven in compression. Results: No significant failure differences were observed between Groups 1 and 2 under static-loading or fatigue test. Clinical significance: In a fracture gap model the orientation of the locked monocortical screws did not show any influence on the mechanical performance of the S.P.S. Free-Block to tests of axial compression and four-point bending. © Schattauer 2013.