Chronic restraint or variable stresses differently affect the behavior, corticosterone secretion and body weight in rats

Organisms are constantly subjected to stressful stimuli that affect numerous physiological processes and activate the hypothalamo-pituitary-adrenal (HPA) axis, increasing the release of glucocorticoids. Exposure to chronic stress is known to alter basic mechanisms of the stress response. The purpose of the present study was to compare the effect of two different stress paradigms (chronic restraint or variable stress) on behavioral and corticosterone release to a subsequent exposure to stressors. Considering that the HPA axis might respond differently when it is challenged with a novel or a familiar stressor we investigated the changes in the corticosterone levels following the exposure to two stressors: restraint (familiar stress) or forced novelty (novel stress). The changes in the behavioral response were evaluated by measuring the locomotor response to a novel environment. In addition, we examined changes in body, adrenals, and thymus weights in response to the chronic paradigms. Our results showed that exposure to chronic variable stress increased basal plasma corticosterone levels and that both, chronic restraint and variable stresses, promote higher corticosterone levels in response to a novel environment, but not to a challenge restraint stress, as compared to the control (non-stressed) group. Exposure to chronic restraint leads to increased novelty-induced locomotor activity. Furthermore, only the exposure to variable stress reduced body weights. In conclusion, the present results provide additional evidence on how chronic stress affects the organism physiology and point to the importance of the chronic paradigm and challenge stress on the behavioral and hormonal adaptations induced by chronic stress. (c) 2006 Elsevier B.V. All rights reserved.

Design of fuzzy regulators with optimal initial conditions compensation

In almost all cases, the goal of the design of automatic control systems is to obtain the parameters of the controllers, which are described by differential equations. In general, the controller is artificially built and it is possible to update its initial conditions. In the design of optimal quadratic regulators, the initial conditions of the controller can be changed in an optimal way and they can improve the performance of the controlled system. Following this idea, a LNU-based design procedure to update the initial conditions of PI controllers, considering the nonlinear plant described by Takagi-Sugeno fuzzy models, is presented. The importance of the proposed method is that it also allows other specifications, such as, the decay rate and constraints on control input and output. The application in the control of an inverted pendulum illustrates the effectively of proposed method.

Cerebral ischemia as initial neurological manifestation of atrial myxoma: case report

Infartos cerebrais de etiologia cardíaca são observados em cerca de 20% dos pacientes com acidente vascular cerebral isquêmico. Infarto cerebral ocorre como manifestação clínica inicial em um terço dos casos de mixoma atrial. Embora quase metade dos pacientes com mixoma atrial apresente alteração ao exame neurológico, infarto cerebral não hemorrágico é visto na tomografia computadorizada em praticamente todos os casos. Os autores apresentam o caso de uma paciente, cuja primeira manifestação clínica do mixoma atrial foi um acidente vascular cerebral isquêmico e chamam a atenção para a possibilidade de infarto cerebral silencioso em pacientes portadores de mixoma atrial.

A new short and simple health-related quality of life measurement for paediatric rheumatic diseases: initial validation in juvenile idiopathic arthritis

Objective. To develop and validate a new short and simple measure of health-related quality of life (HRQL) in children with juvenile idiopathic arthritis (JIA).Methods. The Paediatric Rheumatology Quality of Life Scale (PRQL) is a 10-item questionnaire that explores HRQL in two domains: physical health (PhH) and psychosocial health (PsH). Validation of the parent proxy report and child self-report versions of the instrument was accomplished by evaluating 472 JIA patients and similar to 800 healthy children. Validation analyses included assessment of feasibility, face and content validity; construct and discriminative ability; internal structure and consistency; test-retest reliability; responsiveness to clinical change; and minimal clinically important difference.Results. The PRQL was found to be feasible and to possess both face and content validity. The PRQL score correlated in the predicted range with most of the other JIA outcome measures, thereby demonstrating good construct validity, and discriminated well between different levels of disease severity. Assessment of internal structure (factor analysis) revealed that the PhH and PsH subscales identify two unambiguously separated domains. The internal consistency (Cronbach's alpha) was 0.86. The intraclass correlation coefficient for test-retest reliability was 0.91. The PRQL revealed fair responsiveness, with a standardized response mean of 0.67 in improved patients. Overall, the PRQL appeared to be more able to capture physical HRQL than psychosocial HRQL.Conclusion. The PRQL was found to possess good measurement properties and is, therefore, a valid instrument for the assessment of HRQL in children with JIA. This tool is primarily proposed for use in standard clinical care.

Refinement and initial validation of a multidimensional composite scale for use in assessing acute postoperative pain in cats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Celecoxib treatment does not alter recruitment and activation of osteoclasts in the initial phase of experimental tooth movement

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Methods Used for Assessing Stresses in Buccomaxillary Prostheses: Photoelasticity, Finite Element Technique, and Extensometry

The authors describe a literature revision on assessing stresses in buccomaxillary prostheses photoelasticity, finite element technique, and extensometry. They describe the techniques and the importance for use of each method in buccomaxillary prostheses with implants and the need of accomplishing more studies in this scarce literary area.

Evaluation of Laser Fluorescence in the Monitoring of the Initial Stage of the De-/Remineralization Process: An in vitro and in situ Study

This study aimed to evaluate laser fluorescence (LF) for monitoring the initial stage of subsurface de- and remineralization (<150 mu m depth). Ninety-six sound blocks of bovine enamel, selected according to surface hardness (SH) and LF were used in two experimental studies, in vitro and in situ. In vitro, blocks were exposed to a demineralizing solution, then remineralized by pH cycling for 6 days. In situ, 10 volunteers wore acrylic palatal appliances, each containing 4 dental enamel blocks that were demineralized for 14 days by exposure to 20% sucrose solution. Following this treatment, blocks were submitted to remineralization for 1 week with fluoride dentifrice (1,100 mu g F/g). In both experiments, SH and LH were measured after demineralization and after remineralization. Further, enamel blocks were selected after the demineralization/remineralization steps for measurement of cross-sectional hardness and integrated loss of subsurface hardness (Delta KHN). SH and Delta KHN showed significant differences among the phases in each study. LF values for sound, demineralized and remineralized enamel were: 5.2 +/- 1.1, 8.1 +/- 1.2 and 5.6 +/- 0.8, respectively, in the in vitro study, and 5.3 +/- 0.3, 16.5 +/- 4.7 and 6.5 +/- 2.5, respectively, in the in situ study, values for demineralized enamel being significantly higher than for sound and remineralized enamel in both studies. However, LF was correlated with Delta KHN only in situ. LF was capable of monitoring de- and remineralization in early lesions in situ, when bacteria are presumably present in the caries lesion body, but is not correlated with mineral changes in bacteria-free systems. Copyright (C) 2009 S. Karger AG, Basel

Influence of thermal and mechanical stresses on the strength of intact and relined denture bases

Statement of problem. Denture bases may become increasingly weaker as a result of thermal stress and flexural cyclic loading. Information regarding this potential problem and its relationship to the denture base reline is limited.Purpose. This study evaluated the influence of thermal and mechanical stresses on the strength of intact and relined denture bases.Material and methods. Twenty-eight microwave-polymerized (Acron MC) intact denture bases were prepared in the shape of a 3-mm-thick maxillary denture. Additionally, fifty-six 2-mm-thick denture bases were relined with 1 mm of autopolymerizing resin (Tokuyama Rebase Fast II or New Truliner) (n = 28). Intact and relined specimens were divided into 4 groups (n = 7) as follows: without stress (control); a mechanical stress at 0.8 Hz for 10,000 cycles; 5000 thermal cycles between 5 degrees C and 55 degrees C; or a combination thermo-mechanical stress. The specimens were vertically loaded in compression with a rounded rod at 5 mm/min until failure, using a universal testing machine. Data on maximum fracture load (N), deflection at fracture (%), and fracture energy (N-mm) were analyzed by 2-way analysis of variance and Student-Newman-Keuls tests (alpha = .05).Results. The strength of the denture bases relined with New Truliner was not significantly affected by any of the experimental conditions, but comparing the control groups, New Truliner exhibited the lowest maximum fracture load values. The maximum fracture load of intact denture bases (P = .002) and those relined with Tokuyama Rebase Fast II (P = .01) showed a significant decrease after thermal stress. Additionally, cyclic loading significantly decreased the maximum fracture load (P < .001), deflection at fracture (P = .025), and fracture energy (P < .001) of intact denture bases and those relined with Tokuyama Rebase (P values of .002, .039, and .001, respectively).Conclusion. Thermal and mechanical stresses exert deleterious effects on the strength of intact and/or relined denture bases, which vary according to the relining material used.

Morphological and histochemical study of the myotomal muscle in pacu (Piaractus mesopotamicus Holmberg, 1887) during the initial growth phases

Morphological and histochemical methods were used to evaluate the myotomal muscle characteristics of pacu (Piaractus mesopotamicus) from hatching to 40 days old. During the larval period, the musculature consisted predominantly of white muscle. White and red muscle mass increased at 10, 20, 30 and 40 days after hatching. The larvae had round muscle fibers with a moderate degree of maturation and central nuclei. In subsequent phases, small and immature fibers were visible near larger and more differentiated fibers. Undifferentiated cells or presumptive myoblasts located in embryogenic zones were visible in the dorsal and ventral regions, and were more evident at 30 and 40 days. The red muscle fibers located in the subdermal region, had oxidative metabolism and slow contraction, whereas the more predominant white muscle fibers had glycolytic metabolism and fast contraction. Our findings indicate that during the initial phases, myotomal muscle growth in pacu occurs by both, muscle fiber hypertrophy and hyperplasia. The analysis of frequency of red and white muscle fibers shows that hyperplastic growth is intense in this period. As the growth rate in adult fish is related to the number of muscle fibers in young fish, extrinsic factors could change the muscle fiber phenotype and influence their ultimate size.

Influence of light quality on germination and initial growth of canephori seedlings Peltophorum dubium (Sprenge) Taub.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Peanut genes identified during initial phase of Cercosporidium personatum infection

Late leaf spot (LLS), caused by the fun.-us Cercosporidium personatum, is one of the most severe diseases in peanut (Arachis hypogaea). The vast majority of commercial cultivars do not exhibit satisfactory levels of resistance to the pathogen, whereas non-commercial genotypes cv. 850 and cv. 909 are resistant to LLS and show symptoms similar to hypersensitive response (HR) lesions. In the present study, we investigated the molecular components of the initial stages of the resistance by gene expression profiling using suppression subtractive hybridization and differential screening of cDNA macroarray techniques. Gene expression analyses have allowed us to identify more than 700 peanut unique expressed sequence taus (EST) involved in several aspects of the early stages of C. personatum pathogenesis, such as components of defense signaling pathways, gene expression regulators, cell cycle controlling genes and components of the biosynthesis of transducer and antimicrobial compounds. The most significantly induced gene corresponds to a novel O'-methyltranferase, suggesting its involvement in the production of local lesions in C. personatum-resistant A. hypogea genotypes. Taken together, our results contribute to elucidate the defense strategies of peanut and provide the framework for the generation of pathogen-resistant peanut cultivars. (C) 2007 Elsevier B.V. All rights reserved.

The influence of initial feeding on muscle development and growth in pacu Piaractus mesopotamicus larvae

The effects of different feeding schemes on pacu Piaractus mesopotamicus early development were evaluated with respect to growth, survival, muscle development, and differential gene expression of MyoD and myogenin. The pacu larvae (4 days post hatch-dph, 0.77 mg wet weight) were given six feeding treatments intentionally designed to cause variations in the larvae growth rate: (A) only artemia nauplii; (CD) only a commercial diet; (ED) only a semi-purified experimental diet; (ACD) and (AED) two treatments that involved weaning; and (S) starvation. Early weaning from artemia nauplii to the formulated diets (ACD and AED) affected growth and survival of the pacu larvae compared with the exclusive use of artemia (A). Starvation (S) and the commercial diet (CD) caused total mortality in pacu larvae at 18 dph. The experimental diet (ED) assured low fish survival and growth. The skeletal muscle morphology was not affected by the delay in somatic growth from early weaning onto the formulated diets. Three distinct muscle compartments were observed throughout the larval development in treatments A, ACD and AED: superficial, deep and intermediate, accompanied by muscle thickening. Severe undernourishment caused drastic differences in growth and in the morphology of the muscle fibers. Pacu larvae fed only formulated diets (CD and ED) showed muscle characteristics similar to the larvae in starvation (S) during the first 15 dph. At 27 and 35 dph, a slight increase in epaxial muscle mass was noted in larvae fed only the experimental diet (ED). At 35 dph, we observed a high frequency of fibers >= 40 mu m in the larvae that were weaned onto the formulated diets (ACD and AED), indicative of hypertrophy. In contrast, the larvae fed only artemia nauplii (A) displayed a larger number of fibers with diameters <= 20 mu m, which is indicative of hyperplasia. The expression of the MyoD and myogenin genes in pacu larvae at 35 dph was not affected by initial feeding (p>0.05). In conclusion, the formulated diets used impaired pacu larvae growth and survival; therefore, they were inadequate for pacu, at least at the times they were introduced. Artemia nauplii were the most adequate food source during first feeding of the pacu, and they produced bigger fish upon completion of the experiment. Moreover, the contribution of hyperplasia to the skeletal muscle growth appeared higher in fast- than in slow-growing pacu larvae. (C) 2011 Elsevier By. All rights reserved.

Metallomic study on plasma samples from Nile tilapia using SR-XRF and GFAAS after separation by 2D PAGE: initial results

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The use of biodiversity as source of new chemical entities against defined molecular targets for treatment of malaria, tuberculosis, and T-cell mediated diseases: a review

The modern approach to the development of new chemical entities against complex diseases, especially the neglected endemic diseases such as tuberculosis and malaria, is based on the use of defined molecular targets. Among the advantages, this approach allows (i) the search and identification of lead compounds with defined molecular mechanisms against a defined target (e.g. enzymes from defined pathways), (ii) the analysis of a great number of compounds with a favorable cost/benefit ratio, (iii) the development even in the initial stages of compounds with selective toxicity (the fundamental principle of chemotherapy), (iv) the evaluation of plant extracts as well as of pure substances. The current use of such technology, unfortunately, is concentrated in developed countries, especially in the big pharma. This fact contributes in a significant way to hamper the development of innovative new compounds to treat neglected diseases. The large biodiversity within the territory of Brazil puts the country in a strategic position to develop the rational and sustained exploration of new metabolites of therapeutic value. The extension of the country covers a wide range of climates, soil types, and altitudes, providing a unique set of selective pressures for the adaptation of plant life in these scenarios. Chemical diversity is also driven by these forces, in an attempt to best fit the plant communities to the particular abiotic stresses, fauna, and microbes that co-exist with them. Certain areas of vegetation (Amazonian Forest, Atlantic Forest, Araucaria Forest, Cerrado-Brazilian Savanna, and Caatinga) are rich in species and types of environments to be used to search for natural compounds active against tuberculosis, malaria, and chronic-degenerative diseases. The present review describes some strategies to search for natural compounds, whose choice can be based on ethnobotanical and chemotaxonomical studies, and screen for their ability to bind to immobilized drug targets and to inhibit their activities. Molecular cloning, gene knockout, protein expression and purification, N-terminal sequencing, and mass spectrometry are the methods of choice to provide homogeneous drug targets for immobilization by optimized chemical reactions. Plant extract preparations, fractionation of promising plant extracts, propagation protocols and definition of in planta studies to maximize product yield of plant species producing active compounds have to be performed to provide a continuing supply of bioactive materials. Chemical characterization of natural compounds, determination of mode of action by kinetics and other spectroscopic methods (MS, X-ray, NMR), as well as in vitro and in vivo biological assays, chemical derivatization, and structure-activity relationships have to be carried out to provide a thorough knowledge on which to base the search for natural compounds or their derivatives with biological activity.