Evaluation of Recycled Rubber in Asphalt Concrete - Black Hawk County, HR-330B, Construction Report, 1992

The disposal of discarded tires has become a major problem. Different methods of recycling have been researched. Currently, Iowa is researching the use of ground recycled crumb rubber from discarded tires in asphalt rubber cement. Six projects have been completed in Iowa using asphalt rubber cement. This project is located on IA 947 (University Avenue) in Cedar Falls/Waterloo. The project contains one section with asphalt rubber cement used in both the binder and surface courses and one section using asphalt rubber cement in the surface course with a conventional binder. There are two control sections where conventional asphalt pavement was placed.

Fast Track and Fast Track II - Cedar Rapids, Iowa, HR-544, Construction Report, 1989

Two lanes of a major four lane arterial street needed to be reconstructed in Cedar Rapids, Iowa. The traffic volumes and difficulty of detouring the traffic necessitated closure for construction be held to an absolute minimum. Closure of the intersections, even for one day, was not politically feasible. Therefore, Fast Track and Fast Track II was specified for the project. Fast Track concrete paving has been used successfully in Iowa since 1986. The mainline portion of the project was specified to be Fast Track and achieved the opening strength of 400 psi in less than twelve hours. The intersections were allowed to be closed between 6 PM and 6 AM. This could occur twice - once to remove the old pavement and place the base and temporary surface and the second time to pave and cure the new concrete. The contractor was able to meet these restrictions. The Fast Track II used in the intersections achieved the opening strength of 350 psi in six to seven hours. Two test sections were selected in the mainline Fast Track and two intersections were chosen to test the Fast Tract II. Both flexural and compression specimens were tested. Pulse velocity tests were conducted on the pavement and test specimens. Maturity curves were developed through monitoring of the temperatures. Correlations were performed between the maturity and pulse velocity and the flexural strengths. The project was successful in establishing the feasibility of construction at night, with no disruption of traffic in the daytime, using fast Track II. Both the Fast Track II pavements were performing well four years after construction.

Compendium of projects in the European nanosafety cluster

This is the fourth edition of the Nanosafety Cluster compendium. It documents the status of important projects on nanomaterial toxicity and exposure monitoring, integrated risk management, research infrastructure and coordination and support activities. The compendium is not intended to be a guidance document for human health and environmental safety management of nanotechnologies, as such guidance documents already exist and are widely available. Neither is the compendium intended to be a medium for the publication of scientific papers and research results, as this task is covered by scientific conferences and the peer reviewed press. The compendium aims to bring researchers closer together and show them the potential for synergy in their work. It is a means to establish links and communication between them during the actual research phase and well before the publication of their results. It thus focuses on the communication of projects' strategic aims, extensively covers specific work objectives and the methods used in research, and documents human capacities and available laboratory infrastructure. As such, the compendium supports collaboration on common goals and the joint elaboration of future plans, whilst compromising neither the potential for scientific publication, nor intellectual property rights.

Final architecture diploma projects in the analysis of the UPC buildings energy performance

A partir de maig de 2003, per iniciativa del Vicerectorat adjunt d’Edificacions de la UPC, el Centre Interdisciplinari de Tecnologia, Innovació i Educació per a la Sostenibilitat (CITIES) treballa en l’elaboració i la implantació del Pla d’Eficiència en el Consum de Recursos (PECR), amb l’objectiu d’establir polítiques i definir línees d’actuació per a l’estalvi i l’eficiència en el consum dels recursos energètics i d’ aigua en els edificis de la UPC.El PECR contempla, en una de les primeres fases, la realització d’avaluacions energètiques en les edificacions de la UPC per valorar l’estat actual dels edificis i poder establir uns indicadors del seu comportament energètic a partir dels quals establir els objectius d’estalvi i d’eficiència. Per fer aquestes avaluacions, es va crear una línea de projectes finals de carrera (PFC) per a estudiants de l’Escola Politècnica Superior de l’Edificació de Barcelona (EPSEB), sota la coordinació de professors tutors de diferents departaments y amb la col•laboració indispensable de totes les unitats de recolzament de la UPC.Aquesta publicació és la ponència presentada al IV Congrès "Sustainable City", a Tallinn, en el que es va presentar aquest projecte com a una eina de treball amb l'objectiu de reduir l'impacte ambiental dels edificis universitaris en les ciutats.

Project Success through Effective Decisions: Case Studies on Project Goal Setting, Success Evaluation and Managerial Decision Making

The objective of the thesis is to structure and model the factors that contribute to and can be used in evaluating project success. The purpose of this thesis is to enhance the understanding of three research topics. The goal setting process, success evaluation and decision-making process are studied in the context of a project, business unitand its business environment. To achieve the objective three research questionsare posed. These are 1) how to set measurable project goals, 2) how to evaluateproject success and 3) how to affect project success with managerial decisions.The main theoretical contribution comes from deriving a synthesis of these research topics which have mostly been discussed apart from each other in prior research. The research strategy of the study has features from at least the constructive, nomothetical, and decision-oriented research approaches. This strategy guides the theoretical and empirical part of the study. Relevant concepts and a framework are composed on the basis of the prior research contributions within the problem area. A literature review is used to derive constructs of factors withinthe framework. They are related to project goal setting, success evaluation, and decision making. On the basis of this, the case study method is applied to complement the framework. The empirical data includes one product development program, three construction projects, as well as one organization development, hardware/software, and marketing project in their contexts. In two of the case studiesthe analytic hierarchy process is used to formulate a hierarchical model that returns a numerical evaluation of the degree of project success. It has its origin in the solution idea which in turn has its foundation in the notion of projectsuccess. The achieved results are condensed in the form of a process model thatintegrates project goal setting, success evaluation and decision making. The process of project goal setting is analysed as a part of an open system that includes a project, the business unit and its competitive environment. Four main constructs of factors are suggested. First, the project characteristics and requirements are clarified. The second and the third construct comprise the components of client/market segment attractiveness and sources of competitive advantage. Together they determine the competitive position of a business unit. Fourth, the relevant goals and the situation of a business unit are clarified to stress their contribution to the project goals. Empirical evidence is gained on the exploitation of increased knowledge and on the reaction to changes in the business environment during a project to ensure project success. The relevance of a successful project to a company or a business unit tends to increase the higher the reference level of project goals is set. However, normal performance or sometimes performance below this normal level is intentionally accepted. Success measures make project success quantifiable. There are result-oriented, process-oriented and resource-oriented success measures. The study also links result measurements to enablers that portray the key processes. The success measures can be classified into success domains determining the areas on which success is assessed. Empiricalevidence is gained on six success domains: strategy, project implementation, product, stakeholder relationships, learning situation and company functions. However, some project goals, like safety, can be assessed using success measures that belong to two success domains. For example a safety index is used for assessing occupational safety during a project, which is related to project implementation. Product safety requirements, in turn, are connected to the product characteristics and thus to the product-related success domain. Strategic success measures can be used to weave the project phases together. Empirical evidence on their static nature is gained. In order-oriented projects the project phases are oftencontractually divided into different suppliers or contractors. A project from the supplier's perspective can represent only a part of the ¿whole project¿ viewed from the client's perspective. Therefore static success measures are mostly used within the contractually agreed project scope and duration. Proof is also acquired on the dynamic use of operational success measures. They help to focus on the key issues during each project phase. Furthermore, it is shown that the original success domains and success measures, their weights and target values can change dynamically. New success measures can replace the old ones to correspond better with the emphasis of the particular project phase. This adjustment concentrates on the key decision milestones. As a conclusion, the study suggests a combination of static and dynamic success measures. Their linkage to an incentive system can make the project management proactive, enable fast feedback and enhancethe motivation of the personnel. It is argued that the sequence of effective decisions is closely linked to the dynamic control of project success. According to the used definition, effective decisions aim at adequate decision quality and decision implementation. The findings support that project managers construct and use a chain of key decision milestones to evaluate and affect success during aproject. These milestones can be seen as a part of the business processes. Different managers prioritise the key decision milestones to a varying degree. Divergent managerial perspectives, power, responsibilities and involvement during a project offer some explanation for this. Finally, the study introduces the use ofHard Gate and Soft Gate decision milestones. The managers may use the former milestones to provide decision support on result measurements and ad hoc critical conditions. In the latter milestones they may make intermediate success evaluation also on the basis of other types of success measures, like process and resource measures.

The Spatial Distribution of Spanish Transport Infrastructure between 1860 and 1930

The origin of Spanish regional economic divergence can be traced back at least until the seventeenth century, although its full definition took place during industrialisation. Historians have often included uneven regional infrastructure endowments among the factors that explain divergence among Spanish regions, although no systematic analysis of the spatial distribution of Spanish infrastructure and its determinants has been carried out so far. This paper aims at filling that gap, by offering a description of the regional distribution of the main Spanish transport infrastructure between the middle of the nineteenth century and the Civil War. In addition, it estimates a panel data model to search into the main reasons that explain the differences among the Spanish regional endowments of railways and roads during that period. The outcomes of that analysis indicate that both institutional factors and the physical characteristics of each area had a strong influence on the distribution of transport infrastructure among the Spanish regions.

University Institutional Repository and its Place in the University Information Infrastructure

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Creating risk measurement model to project portfolio management in construction company

This thesis was carried out as a case study of a company YIT in order to clarify the sev-erest risks for the company and to build a method for project portfolio evaluation. The target organization creates new living environment by constructing residential buildings, business premises, infrastructure and entire areas worth for EUR 1.9 billion in the year 2013. Company has noted project portfolio management needs more information about the structure of project portfolio and possible influences of market shock situation. With interviews have been evaluated risks with biggest influence and most appropriate metrics to examine. The major risks for the company were evaluated by interviewing the executive staff. At the same time, the most appropriate risk metrics were considered. At the moment sales risk was estimated to have biggest impact on company‟s business. Therefore project port-folio evaluation model was created and three different scenarios for company‟s future were created in order to identify the scale of possible market shock situation. The created model is tested with public and descriptive figures of YIT in a one-year-long market shock and the impact on different metrics was evaluated. Study was conducted using con-structive research methodology. Results indicate that company has notable sales risk in certain sections of business portfolio.

Ympäristöjohtaminen tienrakennushankkeessa

Tässä diplomityössä tutkittiin tienrakentamisen aikaista ympäristöjohtamista. Työn tavoitteena oli arvioida jo toteutuneen infrastruktuuriprojektin rakentamisen aikaisen ympäristöjohtamisen onnistumista, verrata toteutunutta ympäristöjohtamista standardiin SFS-EN ISO 14001 ja löytää standardin avulla kehitysehdotukset vastaavanlaisten projektien toteuttamisen aikaiseen ympäristöjohtamiseen tulevaisuudessa. Työ toteutettiin tutkimalla esimerkkiprojektin ympäristönsuojelulle ja ympäristövaikutusten seurannalle tehtyjä suunnitelmia, projektin rakentamisen aikana koottua laatuaineistoa, projektin aikana pidettyjä kokouksia ja tiedotustilaisuuksia sekä haastattelemalla projektin ympäristöjohtamisen toteutuksen kannalta avainhenkilöitä. Tutkimuksessa havaittiin, että jos projektijohto hyödyntäisi ISO 14001 standardia ym-päristöjohtamisensa perustana vastaavanlaisissa tienrakennusprojekteissa, pystyisi se kehittämään projektin urakoitsijoiden hankintavaihetta, projektin aikaista sisäistä ja ulkoista viestintää sekä projektinjohdon toteuttamaa laadunvalvontaa projektin aikana. ISO 14001 standardin hyödyntäminen projektin toteuttamisen aikaisessa ympäristöjoh-tamisessa vaatisi projektin ylimmän johdon sitoutumista standardin noudattamiseen. Ympäristöjohtaminen tulee implementoida osaksi projektijohtamista ja sen toimijoilla tulee olla konkreettista vaikutusvaltaa projektin toimintaan. Projektijohdon sitoutuminen standardin mukaisuuteen antaa puitteet ja käytännöt sekä vaatia että valvoa projektin toimijoiden ympäristönsuojelun toteutumista, raportointia ja viestintää.

Tower and Thistle Construction

Distant view of the tower and construction of the Thistle Complex.

Niagara alternative food projects : networks, discourses and nature /

This thesis undertakes an exploration of the nature of alternative food projects in Niagara. A review of various theoretical approaches to the study of food and agriculture, suggests that actor-network theory offers the most useful lens through which to understand these projects. In particular, actor-network theory facilitates non-dualistic theorisations of power and scale and a commitment to the inclusion of non-humans in the 'social' sciences. The research is based on 19 in-depth interviews with actors involved in various urban and rural projects including community supported agriculture, community gardens, chefs using local seasonal food, a winery that grows organically, the good food box, a value-added small business, and organic producers. The analysis consists of four themes. The first analytical section pays special attention to the prominence of agri-tourism in Niagara, and examines the ways in which the projects in the sample interact with agri-tourist networks. In the second section the discussion focuses on the discourses and practices of resistance among Niagara alternative food actors. The participants' interviews suggest there are more discourses of resistance toward agri-tourist than toward dominant food networks. The third section questions commodity chain theorisations of alternative food projects. In particular, this section shows how the inclusion of non-human actors in an analysis confounds conceptualisations of 'short' and 'local' chains. The final analytical section assesses relations of power in Niagara alternative food projects. Three important conclusions arise from this research. First, Niagara alternative food projects cannot be conceptualised as operating at the 'local' scale. Broadening the scope of analysis to include non-human actors, it becomes apparent that these projects actually draw on a variety of extra-local actors. They are at once local and global. Second, the projects in this sample are simultaneously part of alternative, dominant and agri-tourist networks. While Niagara alternative food projects do perform many of the roles characteristic of alternative food systems, they are also involved in practices of development, business, and class distinction. Thus, alternative food networks should not be understood as separate from and in direct opposition to dominant food networks. Despite the second conclusion, this research determines that Niagara alternative food projects have made significant strides in the reworking of power. The projects represented in this thesis do engage in resistant practices and are associated with increased levels ofjustice.

La protection du territoire agricole de la région métropolitaine de recensement (RMR) de Montréal dans un contexte d’étalement urbain

L’étalement urbain constitue un enjeu de société qui préoccupe tous les acteurs de l’aménagement du territoire. Le développement de superficies urbanisées à la périphérie des villes à des fins résidentielle, industrielle, commerciale et d’infrastructures se caractérise par une faible densité des structures bâties et par une perte de terres agricoles. Les conséquences sont importantes notamment parce que ces pertes sont irréversibles. Ce projet de recherche analyse les tendances actuelles de l’étalement urbain dans la RMR de Montréal et au-delà de celle-ci ainsi que ses impacts sur les territoires agricoles. Il comporte trois objectifs secondaires. Le premier objectif vise à analyser l’importance de la multifonctionnalité de l’agriculture et sa prise en compte dans les stratégies d’aménagement et de revitalisation agricole dans les MRC. Le deuxième objectif vise à établir les liens entre ces stratégies et les pressions urbaines dans la région métropolitaine de Montréal. Les pressions urbaines des 88 municipalités sont analysées en fonction de l’augmentation de la population et des ménages, par le nombre de mises en chantier ainsi que par les demandes de modification de la zone agricole déposées par les municipalités auprès de la CPTAQ entre 2000 et 2009. Le dernier objectif vise à identifier les MRC qui ont développé ces stratégies dans leur schéma d’aménagement et de développement (SAD), pour ensuite comparer les intentions et les actions des MRC par rapport à l’étalement urbain qui se développe concrètement sur leur territoire depuis l’an 2000. Pour ce faire, deux critères ont été retenus : une typologie des stratégies d’aménagement et de revitalisation agricole des SAD et les positions adoptées par les acteurs impliqués dans les demandes de modification. En conclusion, les cinq MRC analysées en détail ont demandé entre 2,1 % et 2,6 % de leur propre zone agricole au cours des dix dernières années, peu importe l’élaboration de leur SAD et les pressions urbaines qu’elles subissent.

Modélisation de l’exposition à la silice cristalline dans le secteur de la construction

L’exposition prolongée par inhalation à des poussières de taille respirable contenant de la silice cristalline est reconnue pour causer des maladies respiratoires dont le cancer du poumon et la silicose. De nombreuses études ont relevé la surexposition des travailleurs de la construction à la silice cristalline, puisque ce composé est présent dans de nombreux matériaux utilisés sur les chantiers. L’évaluation de l’exposition à la silice cristalline dans cette industrie constitue un défi en raison de la multitude de conditions de travail et de la nature éphémère des chantiers. Afin de mieux cerner cette problématique, une banque de données d’exposition professionnelle compilée à partir de la littérature a été réalisée par une équipe de l’Université de Montréal et de l’IRSST, et constitue le point de départ de ce travail. Les données présentes dans la banque ont été divisées en fonction de la stratégie d’échantillonnage, résultant en deux analyses complémentaires ayant pour objectif d’estimer les niveaux d’exposition sur le quart de travail en fonction du titre d’emploi, et selon la nature de la tâche exécutée. La méthode de Monte Carlo a été utilisée pour recréer les échantillons provenant de données rapportées sous forme de paramètres de synthèse. Des modèles Tobit comprenant les variables de titre d’emploi, tâche exécutée, durée, année et stratégie d’échantillonnage, type de projet, secteur d’activité, environnement et moyens de maîtrise ont été développés et interprétés par inférence multimodèle. L’analyse basée sur le quart de travail a été réalisée à partir de 1346 données d’exposition couvrant 11 catégories de titre d’emploi. Le modèle contenant toutes les variables a expliqué 22% de la variabilité des mesures et la durée, l’année et la stratégie d’échantillonnage étaient d’importants prédicteurs de l’exposition. Les chantiers de génie civil et les projets de nouvelle construction étaient associés à des expositions plus faibles, alors que l’utilisation de moyens de maîtrise diminuait les concentrations de 18% à l’extérieur et de 24% à l’intérieur. Les moyennes géométriques les plus élevées prédites pour l’année 1999 sur 8 heures étaient retrouvées chez les foreurs (0.214 mg/m3), les travailleurs souterrains (0.191 mg/m3), les couvreurs (0.146 mg/m3) et les cimentiers-applicateurs (0.125 mg/m3). 1566 mesures réparties en 27 catégories de tâches étaient contenues dans la seconde analyse. Le modèle contenant toutes les variables a expliqué 59% des niveaux d’exposition, et l’ensemble des variables contextuelles étaient fortement prédictives. Les moyennes géométriques prédites pour l’année 1998 et selon la durée médiane par tâche dans la banque de données étaient plus élevées lors du bouchardage du béton (1.446 mg/m3), du cassage de pièces de maçonnerie avec autres outils (0.354 mg/m3), du décapage au jet de sable (0.349 mg/m3) et du meulage de joints de brique (0.200 mg/m3). Une diminution importante des concentrations a été observée avec les systèmes d’arrosage (-80%) et d’aspiration des poussières (-64%) intégrés aux outils. L’analyse en fonction des titres d’emploi a montré une surexposition généralisée à la valeur guide de l’ACGIH et à la norme québécoise, indiquant un risque à long terme de maladies professionnelles chez ces travailleurs. Les résultats obtenus pour l’évaluation en fonction de la tâche exécutée montrent que cette stratégie permet une meilleure caractérisation des facteurs associés à l’exposition et ainsi de mieux cibler les priorités d’intervention pour contrôler les niveaux d’exposition à la silice cristalline sur les chantiers de construction durant un quart de travail.

Densification & affordability : comparative real estate projects across Montreal

Montréal, Québec se construit vers une forme urbaine compacte, mais il en relève des questionnements quant aux effets sur l’abordabilité et l’accession à la propriété. En tenant compte du processus de la densification urbaine, une enquête sur une série de projets de condominiums immobiliers à travers la ville est menée afin de divulguer les prix des projets nouveaux ou en construction. Au préalable, ceci survole la littérature et les études actuelles portant sur la planification urbaine, notamment celles qui sont reliées au Smart Growth, études dans lesquelles le contexte de densification et de tendances consuméristes à préférer les formes urbaines étalées est mis en évidence. Essentiellement, Moroni (2010) souligne l’approche dichotomique en planification urbaine entre les perspectives «teleocratic» et «nomocratic». La densification montréalaise actuelle contemporaine s’exprime par une multitude de modèles de condos conformes aux nouvelles tendances démographiques et des modes de vie. En s’appuyant sur les critères du programme Accès Condos, sur les critères du SCHL (32% du revenu) et sur le revenu médian des ménages, le niveau d’accessibilité à la propriété d’un condominium peut être mesuré. Les résultats indiquent que selon ces critères, les logements de style condominium, neufs et en construction, sont abordables. L’analyse contribue empiriquement à la littérature en exposant les liens entre les stratégies actuelles de densification urbaine avec l’abordabilité des logements condos. La recherche porte un regard nouveau sur le phénomène condo à Montréal et ses tendances démographiques. La ville est divisée selon le modèle Burgess et la recherche mène un sondage comparatif des prix pour déterminer l’abordabilité. Les résultats suggèrent que les projets condos actuels sont relativement abordables pour les ménages avec un revenu médian et plus, selon Accès Condos.

Sustainability of Participatory Projects: Study of Productive Sector under Peoples’ Planning in Chempu Village Panchayat of Kottayam District

The study has wider policy implications as it identifies the possible variables which influence the sustainability of participatory productive sector projects. The method which is developed to study the sustainability of projects under People’s Planning in Chempu Panchayat could be used for studying the same in other panchayats also. Unlike the case of the standard features of sustainability identified, the independent variables vary according to the nature of the project. Hence, this needs to be modified accordingly while applying the method in a dissimilar domain. Selection of a single panchayat for the present study is relevant on the basis of a common package of inputs for decentralised planning which is forwarded by the State Planning Board respectively for the three-tier panchayat system in Kerala. The dynamic filed realities could be brought out in view of a comprehensive planning approach through an in depth study of specific cases.The assessment of the nature and pattern of productive sector projects in the selected Village Panchayat puts the projects under close scrutiny. The analysis has depended largely on secondary sources of information, especially from panchayat level plan documents, and also on the primary information obtained using direct observation and on-site inspection of project sites. An analysis of the nature and pattem of productive sector projects is important as it gives all necessary information regarding follow-up, monitoring/evaluation and even termination of a particular project. It has also revealed the tendencies of including infrastructure and service sector projects under ‘productive’ category, especially for maintaining the stipulated ratio (40:30:30) of grant-in-aid distribution. The study regarding the allocation and expenditure pattern of plan funds is vital in policy level as it reveals the under-noticed allocation and expenditure pattern of plan funds other than grant-in-aid. One major limitation of the study has been the limited availability of secondary data, especially regarding project-wise expenditure and monitoring/evaluation reports of various project committees.