Associations between the decrease in bovine clinical mastitis and changes in dairy farmers' attitude, knowledge, and behavior in the Netherlands.

The aim of this study was to associate changes in dairy farmers' self-reported attitude, knowledge, and behavior with the decrease in incidence rate of clinical mastitis (IRCM). Farmer-diagnosed clinical mastitis cases were obtained from two surveys conducted before (July 2004-June 2005) and at the end (2009) of a mastitis control program in the Netherlands. Information on farmers' attitude, knowledge, and behavior was also obtained by sending the farmers the same questionnaire during both surveys. Multivariable linear regression models identified that the herd level 2004 IRCM explained 28% of the variation in the decrease of IRCM. Changes in farmers' attitude and knowledge, and changes in farmers' behavior additionally explained 24% and 5%, respectively. These results suggest that the way management measures are executed may be at least as important as the fact that they are executed. No control group was available for this study because the intervention was applied at the national level. We therefore do not claim any causal relationships.

Level of incongruence during cardiac rehabilitation and prediction of future CVD-related hospitalizations plus all-cause mortality

Independent of traditional risk factors, psychosocial risk factors increase the risk of cardiovascular disease (CVD). Studies in the field of psychotherapy have shown that the construct of incongruence (meaning a discrepancy between desired and achieved goals) affects the outcome of therapy. We prospectively measured the impact of incongruence in patients after undergoing a cardiac rehabilitation program. We examined 198 CVD patients enrolled in a 8–12 week comprehensive cardiac rehabilitation program. Patients completed the German short version of the Incongruence Questionnaire and the SF-36 Health Questionnaire to measure quality of life (QoL) at discharge of rehabilitation. Endpoints at follow-up were CVD-related hospitalizations plus all-cause mortality. During a mean follow-up period of 54.3 months, 29 patients experienced a CVD-related hospitalization and 3 patients died. Incongruence at discharge of rehabilitation was independent of traditional risk factors a significant predictor for CVD-related hospitalizations plus all-cause mortality (HR 2.03, 95% CI 1.29–3.20, p = .002). We also found a significant interaction of incongruence with mental QoL (HR .96, 95% CI .92–.99, p = .027), i.e. incongruence predicted poor prognosis if QoL was low (p = .017), but not if QoL was high (p = .74). Incongruence at discharge predicted future CVD-related hospitalizations plus all-cause mortality and mental QoL moderated this relationship. Therefore, incongruence should be considered for effective treatment planning and outcome measurement.

Longitudinal Dichelobacter nodosus status in 9 sheep flocks free from clinical footrot

Footrot is a widespread problem in Swiss sheep farming. The objectives of this study were to determine whether flocks which were clinically free from footrot carry virulent strains of Dichelobacter nodosus, and to describe the infection dynamics for flocks and individual sheep. To this purpose, a new PCR-diagnostic tool was used, which is able to distinguish benign from virulent D. nodosus. Nine farms were examined three times at intervals of 6 months. Cotton swabs were used to collect samples from the interdigital skin to analyze for the presence of virulent and benign strains of D. nodosus. Additionally, epidemiological data of the farms were collected with the aid of a standardized questionnaire. On four farms, benign strains were diagnosed at each visit; in one farm, benign strains were detected once only. Two flocks revealed sheep infected with virulent D. nodosus throughout the study but without clinical evidence of footrot. In two flocks, the virulent strains of D. nodosus were introduced into the flock during the study period. In one farm, clinical symptoms of virulent footrot were evident only two weeks after the positive finding by PCR. Only individual sheep with previously negative status, but none with previously benign status became infected with virulent strains during the study. The newly developed competitive RT PCR proved to be more sensitive than clinical diagnosis for detecting footrot infection in herds, as it unequivocally classified the four flocks as infected with virulent D. nodosus, even though they did not show clinical signs at the times of sampling. This early detection may be crucial to the success of any control program. Both new infections with virulent strains could be explained by contact with sheep from herds with virulent D. nodosus as evaluated from the questionnaires. These results show that the within-herd eradication of footrot becomes possible using the competitive PCR assay to specifically diagnose virulent D. nodosus.

The benefits and pitfalls of language change – The case of gender-fair language use

Gender-fair language (GFL) is a symmetric linguistic treatment of women and men. To create GFL two principle strategies can be deployed. Neutralization means that gender-unmarked forms (police officer) are used to substitute the male-biased (policeman). Feminization, implies that feminine forms of nouns are used systematically to make female referents visible. The results of a comprehensive European research program provide evidence in support of a non-discrimination policy in language, yet identify the potential setbacks preventing linguistic reforms to be effective. In general, studies indicate positive effects of GFL. In an applied context, for example women feel more motivated to apply for the position if a job advertisement is formulated in a GFL. However, negative effects of reformed usage were also reported specifically when GFL is novel. For example, a woman referred to as a chairperson was evaluated lower in occupational status than a woman referred to as a chairman.

Investigating the role of free-ranging wild boar (Sus scrofa) in the re-emergence of enzootic pneumonia in domestic pig herds: a pathological, prevalence and risk-factor study

Enzootic pneumonia (EP) caused by Mycoplasma hyopneumoniae has a significant economic impact on domestic pig production. A control program carried out from 1999 to 2003 successfully reduced disease occurrence in domestic pigs in Switzerland, but recurrent outbreaks suggested a potential role of free-ranging wild boar (Sus scrofa) as a source of re-infection. Since little is known on the epidemiology of EP in wild boar populations, our aims were: (1) to estimate the prevalence of M. hyopneumoniae infections in wild boar in Switzerland; (2) to identify risk factors for infection in wild boar; and (3) to assess whether infection in wild boar is associated with the same gross and microscopic lesions typical of EP in domestic pigs. Nasal swabs, bronchial swabs and lung samples were collected from 978 wild boar from five study areas in Switzerland between October 2011 and May 2013. Swabs were analyzed by qualitative real time PCR and a histopathological study was conducted on lung tissues. Risk factor analysis was performed using multivariable logistic regression modeling. Overall prevalence in nasal swabs was 26.2% (95% CI 23.3-29.3%) but significant geographical differences were observed. Wild boar density, occurrence of EP outbreaks in domestic pigs and young age were identified as risk factors for infection. There was a significant association between infection and lesions consistent with EP in domestic pigs. We have concluded that M. hyopneumoniae is widespread in the Swiss wild boar population, that the same risk factors for infection of domestic pigs also act as risk factors for infection of wild boar, and that infected wild boar develop lesions similar to those found in domestic pigs. However, based on our data and the outbreak pattern in domestic pigs, we propose that spillover from domestic pigs to wild boar is more likely than transmission from wild boar to pigs.

The meaning of informal BMT caregiving

Objectives. The aims of this qualitative descriptive exploratory study were to (1) describe informal caregiver commitment in informal caregiving; (2) describe caregiver expectations in informal caregiving; (3) describe caregiver role negotiation in informal caregiving, (4) identify other important caregiver energy sources; and (5) refine the conceptual model of Informal Caregiving Dynamics based on the study results. ^ Methods. Participants were 40 informal caregivers of blood and marrow transplant patients being treated at a comprehensive cancer center who told their caregiving stories in an audiotaped dialogue. Patients consented to have their caregivers contacted about the study and to have information collected from their medical records. To address the specific aims, the dialogues were analyzed for major elements and themes with an adaptation of the descriptive exploratory method. ^ Findings. Commitment was redefined as enduring caregiver responsibility that inspires life changes to make the patient a priority. Commitment calls caregivers to supportive presence and self-affirming loving connection with the patient. Expectation management was defined as envisioning the future and yearning to return to normal. Expectation management includes taking one day at a time, gauging behavior from past experiences with the patient, and reconciling anticipated to actual treatment twists and turns. Role negotiation was defined as appropriate pushing by the caregiver toward patient recovery and independence after getting a handle on complex care that demands shared responsibilities. Role negotiation happens as caregivers determine action with attention to patient voice and vigilantly bridge communication between patients and the health care system. Three additional energy sources of caring for self, gaining insight, and connecting with others, were identified and added to the model as underpinnings for commitment, expectation, and role negotiation respectively. ^ Discussion and implications. Methods of supporting informal caregivers that deserve investigation include consistent acknowledgment of caregiver contribution to patient care; provision of clear, present-focused information; opportunities to reconcile expectations with outcomes by developing a coherent caregiving story; and encouragement to maintain good health habits while caregiving. Patient contribution to the dynamics of caregiving warrants future research attention as does change in energy sources over time as a caregiver. ^

Determining the association between nativity status and mammography utilization among women in the United States using 2000 and 2005 NHIS data

Objective. To determine the association between nativity status and mammography utilization among women in the U.S. and assess whether demographic variables, socioeconomic factors healthcare access, breast cancer risk factors and acculturation variables were predictors in the relationship between nativity status and mammography in the past two years. ^ Methods. The NHIS collects demographic and health information using face-to-face interviews among a representative sample of the U.S. population and a cancer control module assessing screening behaviors is included every five years. Descriptive statistics were used to report demographic characteristics of women aged 40 and older who have received a mammogram in the last 2 years from 2000 and 2005. We used chi square analyses to determine statistically significant differences by mammography screening for each covariate. Logistic regression was used to determine whether demographic characteristics, socioeconomic characteristics, healthcare access, breast cancer risk factors and acculturation variables among foreign-born Hispanics affected the relationship between nativity status and mammography use in the past 2 years. ^ Results. In 2000, the crude model between nativity and mammography was significant but results were not significant after adjusting for health insurance, access and reported health status. Significant results were also reported for years in U.S. and mammography among foreign-born born women. In 2005, the crude model was also significant but results were not significant after adjusting for demographic factors. Furthermore, there was a significant finding between citizenship and mammography in the past 2 years. ^ Conclusions. Our study contributes to the literature as one of the first national-based studies assessing mammography in the past two years based on nativity status. Based on our findings, health insurance and access to care is an important predictor in mammography utilization among foreign-born women. For those with health care access, physician recommendation should further be assessed to determine whether women are made aware of mammography as a means to detect breast cancer at an early stage and further reduce the risk of mortality from the breast cancer.^

Disease risk factors and humoral antibody response to periodontal-associated pathogens: A model to evaluate periodontal disease in older adults

Periodontal diseases (PD) are infectious, inflammatory, and tissue destructive events which affect the periodontal ligament that surround and support the teeth. Periodontal diseases are the major cause of tooth loss after age 35, with gingivitis and periodontitis affecting 75% of the adult population. A select group of bacterial organisms are associated with periodontal pathogenesis. There is a direct association between oral hygiene and prevention of PD. The importance of genetic differences and host immune response capabilities in determining host, susceptibility or resistance to PD has not been established. This study examined the risk factors and serum (humoral) immune response to periodontal diseased-associated pathogens in a 55 to 80+ year old South Texas study sample with PD. This study sample was described by: age, sex, ethnicity, the socioeconomic factors marital status, income and occupation, IgG, IgA, IgM immunoglobulin status, and the autoimmune response markers rheumatoid factor (RF) and antinuclear antibody (ANA). These variables were used to determine the risk factors associated with development of PD. Serum IgG, IgA, IgM antibodies to bacterial antigens provided evidence for disease exposure.^ A causal model for PD was constructed from associations for risk factors (ethnicity, marital status, income, and occupation) with dental exam and periodontitis. The multiple correlation between PD and ethnicity, income and dental exam was significant. Hispanics of low income were least likely to have had a dental exam in the last year and most likely to have PD. The etiologic agents for PD, as evidenced by elevated humoral antibody responses, were the Gram negative microorganisms Bacteroides gingivalis, serotypes FDC381 and SUNYaBA7A1-28, and Wolinella recta. Recommendation for a PD prevention and control program are provided. ^

A STUDY OF ILLNESS AND RESERVOIRS ASSOCIATED WITH GIARDIA LAMBLIA IN RURAL EGYPT

A longitudinal investigation of the health effects and reservoirs of Giardia lamblia was undertaken in forty households located in a rural Nile Delta region of Egypt. Stool specimens obtained once weekly for six months from two to four year old children were cyst or trophozoite-positive in 42 percent of the 724 examined. The mean duration of excretion in all but one Giardia-negative child was seven and one-half weeks with a range of one to 17 weeks. Clinical symptoms of illness were frequently observed within a month before or after Giardia excretion in stool of children, but a statistical inference of association was not demonstrated.^ Seventeen percent of 697 specimens obtained from their mothers was Giardia-positive for a mean duration of four weeks and a range of one to 18 weeks. Mothers were observed to excrete Giardia in stool less frequently during pregnancy than during lactation.^ Nine hundred sixty-two specimens were collected from 13 species of household livestock. Giardia was detected in a total of 22 specimens from cows, goats, sheep and one duck. Giardia cysts were detected in three of 899 samples of household drinking water.^ An ELISA technique of Giardia detection in human and animal stool was field tested under variable environmental conditions. The overall sensitivity of the assay of human specimens was 74 percent and specificity was 97 percent. These values for assay of animal specimens were 82 percent and 98 percent, respectively.^ Surface antigen studies reported from the NIH Laboratory of Parasitic Diseases show that antigens of three Egyptian human isolates are different from each other and from most other isolates against which they were tested.^ The ubiquity of human and animal fecal contamination combined with estimates of ill days per child per year in this setting are substantial arguments for the introduction of a suggested mass parasite control program to intervene in the cyclical transmission of agents of enteric disease. ^

STRATEGIES FOR THE TRANSFER OF APPROPRIATE TECHNOLOGY TO DEVELOPING COUNTRIES: THE IMPLEMENTATION AND DEVELOPMENT OF ENVIRONMENTAL HEALTH PROGRAMS IN TUNISIA

This dissertation focuses on Project HOPE, an American medical aid agency, and its work in Tunisia. More specifically this is a study of the implementation strategies of those HOPE sponsored projects and programs designed to solve the problems of high morbidity and infant mortality rates due to environmentally related diarrheal and enteric diseases. Several environmental health programs and projects developed in cooperation with Tunisian counterparts are described and analyzed. These include (1) a paramedical manpower training program; (2) a national hospital sanitation and infection control program; (3) a community sewage disposal project; (4) a well reconstruction project; and (5) a solid-waste disposal project for a hospital.^ After independence, Tunisia, like many developing countries, encountered several difficulties which hindered progress toward solving basic environmental health problems and prompted a request for aid. This study discusses the need for all who work in development programs to recognize and assess those difficulties or constraints which affect the program planning process, including those latent cultural and political constraints which not only exist within the host country but within the aid agency as well. For example, failure to recognize cultural differences may adversely affect the attitudes of the host staff towards their work and towards the aid agency and its task. These factors, therefore, play a significant role in influencing program development decisions and must be taken into account in order to maximize the probability of successful outcomes.^ In 1969 Project HOPE was asked by the Tunisian government to assist the Ministry of Health in solving its health manpower problems. HOPE responded with several programs, one of which concerned the training of public health nurses, sanitary technicians, and aids at Tunisia's school of public health in Nabeul. The outcome of that program as well as the strategies used in its development are analyzed. Also, certain questions are addressed such as, what should the indicators of success be, and when is the time right to phase out?^ Another HOPE program analyzed involved hospital sanitation and infection control. Certain generic aspects of basic hospital sanitation procedures were documented and presented in the form of a process model which was later used as a "microplan" in setting up similar programs in other Tunisian hospitals. In this study the details of the "microplan" are discussed. The development of a nation-wide program without any further need of external assistance illustrated the success of HOPE's implementation strategies.^ Finally, although it is known that the high incidence of enteric disease in developing countries is due to poor environmental sanitation and poor hygiene practices, efforts by aid agencies to correct these conditions have often resulted in failure. Project HOPE's strategy was to maximize limited resources by using a systems approach to program development and by becoming actively involved in the design and implementation of environmental health projects utilizing "appropriate" technology. Three innovative projects and their implementation strategies (including technical specifications) are described.^ It is advocated that if aid agencies are to make any progress in helping developing countries basic sanitation problems, they must take an interdisciplinary approach to progrm development and play an active role in helping counterparts seek and identify appropriate technologies which are socially and economically acceptable. ^

Addressing teenage pregnancy in rural areas: A case study from Liberty County, Texas

This study explores the issue of teenage pregnancy in a case study of Liberty County, a rural area in Texas with no public health department. It also describes the decision-making process and barriers faced in the beginning phases of adopting a sexual education program, and sets forth an implementation plan for two school districts on disseminating an evidence-based, comprehensive curriculum. Methods include a review of epidemiological data surrounding teenage pregnancy on the national, state, and county level; a literature review of factors related to teenage pregnancy and past interventions implemented in a rural community; a policy review of past and current bills in Legislature; and an analysis of barriers and decision making in implementing an evidence based program through qualitative observations, discussions with community members during meetings, presentations, and discussions. Results of this study indicate that there is a lack of research conducted in rural areas in the field of teenage pregnancy prevention and sexual education programs. Barriers experienced in Liberty County are shown to be consistent in scientific literature such as funding, logistical issues, and problems approaching the School Board in adopting a comprehensive sexual education program. This study fills a large gap in the literature on rural adolescents and attempts to analyze the process of decision-making in a rural area related to adoption of sexual education programming. In order to relieve this health disparity, further research should focus on rural areas to gain insight on the attitudes and behaviors of rural adolescents and beliefs among community stakeholders.^

Desarrollo de un sistema hardware modular que implemente los instrumentos de un laboratorio de electrónica

El poder disponer de la instrumentación y los equipos electrónicos resulta vital en el diseño de circuitos analógicos. Permiten realizar las pruebas necesarias y el estudio para el buen funcionamiento de estos circuitos. Los equipos se pueden diferenciar en instrumentos de excitación, los que proporcionan las señales al circuito, y en instrumentos de medida, los que miden las señales generadas por el circuito. Estos equipos sirven de gran ayuda pero a su vez tienen un precio elevado lo que impide en muchos casos disponer de ellos. Por esta principal desventaja, se hace necesario conseguir un dispositivo de bajo coste que sustituya de alguna manera a los equipos reales. Si el instrumento es de medida, este sistema de bajo coste puede ser implementado mediante un equipo hardware encargado de adquirir los datos y una aplicación ejecutándose en un ordenador donde analizarlos y presentarlos en la pantalla. En el caso de que el instrumento sea de excitación, el único cometido del sistema hardware es el de proporcionar las señales cuya configuración ha enviado el ordenador. En un equipo real, es el propio equipo el que debe realizar todas esas acciones: adquisición, procesamiento y presentación de los datos. Además, la dificultad de realizar modificaciones o ampliaciones de las funcionalidades en un instrumento tradicional con respecto a una aplicación de queda patente. Debido a que un instrumento tradicional es un sistema cerrado y uno cuya configuración o procesamiento de datos es hecho por una aplicación, algunas de las modificaciones serían realizables modificando simplemente el software del programa de control, por lo que el coste de las modificaciones sería menor. En este proyecto se pretende implementar un sistema hardware que tenga las características y realice las funciones del equipamiento real que se pueda encontrar en un laboratorio de electrónica. También el desarrollo de una aplicación encargada del control y el análisis de las señales adquiridas, cuya interfaz gráfica se asemeje a la de los equipos reales para facilitar su uso. ABSTRACT. The instrumentation and electronic equipment are vital for the design of analogue circuits. They enable to perform the necessary testing and study for the proper functioning of these circuits. The devices can be classified into the following categories: excitation instruments, which transmit the signals to the circuit, and measuring instruments, those in charge of measuring the signals produced by the circuit. This equipment is considerably helpful, however, its high price often makes it hardly accessible. For this reason, low price equipment is needed in order to replace real devices. If the instrument is measuring, this low cost system can be implemented by hardware equipment to acquire the data and running on a computer where analyzing and present on the screen application. In case of an excitation the instrument, the only task of the hardware system is to provide signals which sent the computer configuration. In a real instrument, is the instrument itself that must perform all these actions: acquisition, processing and presentation of data. Moreover, the difficulty of making changes or additions to the features in traditional devices with respect to an application running on a computer is evident. This is due to the fact that a traditional instrument is a closed system and its configuration or data processing is made by an application. Therefore, certain changes can be made just by modifying the control program software. Consequently, the cost of these modifications is lower. This project aims to implement a hardware system with the same features and functions of any real device, available in an electronics laboratory. Besides, it aims to develop an application for the monitoring and analysis of acquired signals. This application is provided with a graphic interface resembling those of real devices in order to facilitate its use.

Técnicas de diseño de pruebas en sistemas embebidos

El software es, cada vez más, una parte muy importante de cualquier circuito electrónico moderno, por ejemplo, un circuito realizado con algún tipo de microprocesador debe incorporar un programa de control por pequeño que sea. Al utilizarse programas informáticos en los circuitos electrónicos modernos, es muy aconsejable, por no decir imprescindible, realizar una serie de pruebas de calidad del diseño realizado. Estas pruebas son cada vez más complicadas de realizar debido al gran tamaño del software empleado en los sistemas actuales, por este motivo, es necesario estructurar una serie de pruebas con el fin de realizar un sistema de calidad, y en algunos casos, un sistema que no presente ningún peligro para el ser humano o el medio ambiente. Esta propuesta consta de la explicación de las técnicas de diseño de pruebas que existen actualmente (por lo menos las más básicas ya que es un tema muy extenso) para realizar el control de calidad del software que puede contener un sistema embebido. Además, muchos circuitos electrónicos, debido a su control o exigencia hardware, es imprescindible que sean manipulados por algún programa que requiera más que un simple microprocesador, me refiero a que se deban controlar por medio de un pequeño programa manipulado por un sistema operativo, ya sea Linux, AIX, Unix, Windows, etc., en este caso el control de calidad se debería llevar a cabo con otras técnicas de diseño. También se puede dar el caso que el circuito electrónico a controlar se deba hacer por medio de una página web. El objetivo es realizar un estudio de las actuales técnicas de diseño de pruebas que están orientadas al desarrollo de sistemas embebidos. ABSTRACT. Software is increasingly a very important part of any modern electronic circuit, for example, a circuit made with some type of microprocessor must incorporate a control program no matter the small it is. When computer programs are used in modern electronic circuits, it is quite advisable if not indispensable to perform a series of quality tests of the design. These tests are becoming more and more difficult to be performed due to the large size of the software used in current systems, which is why it is necessary to structure a series of tests in order to perform a quality system, and in some cases, a system with no danger to humans or to the environment. This proposal consists of an explanation of the techniques used in the tests (at least the most basic ones since it is a very large topic) for quality control of software which may contain an embedded system. In addition, a lot of electronic circuits, due to its control or required hardware, it is essential to be manipulated by a program that requires more than a simple microprocessor, I mean that they must be controlled by means of a small program handled by an operating system, being Linux, AIX, Unix, Windows, etc., in this case the quality control should be carried out with other design techniques. The objective is to study the current test design techniques that are geared to the development of embedded systems. It can also occur that the electronic circuit should be controlled by means of a web page.

Contributions to uncertainty reduction in the estimation of PV plants performance

Esta tesis doctoral presenta un procedimiento integral de control de calidad en centrales fotovoltaicas, que comprende desde la fase inicial de estimación de las expectativas de producción hasta la vigilancia del funcionamiento de la instalación una vez en operación, y que permite reducir la incertidumbre asociada su comportamiento y aumentar su fiabilidad a largo plazo, optimizando su funcionamiento. La coyuntura de la tecnología fotovoltaica ha evolucionado enormemente en los últimos años, haciendo que las centrales fotovoltaicas sean capaces de producir energía a unos precios totalmente competitivos en relación con otras fuentes de energía. Esto hace que aumente la exigencia sobre el funcionamiento y la fiabilidad de estas instalaciones. Para cumplir con dicha exigencia, es necesaria la adecuación de los procedimientos de control de calidad aplicados, así como el desarrollo de nuevos métodos que deriven en un conocimiento más completo del estado de las centrales, y que permitan mantener la vigilancia sobre las mismas a lo largo del tiempo. Además, los ajustados márgenes de explotación actuales requieren que durante la fase de diseño se disponga de métodos de estimación de la producción que comporten la menor incertidumbre posible. La propuesta de control de calidad presentada en este trabajo parte de protocolos anteriores orientados a la fase de puesta en marcha de una instalación fotovoltaica, y las complementa con métodos aplicables a la fase de operación, prestando especial atención a los principales problemas que aparecen en las centrales a lo largo de su vida útil (puntos calientes, impacto de la suciedad, envejecimiento…). Además, incorpora un protocolo de vigilancia y análisis del funcionamiento de las instalaciones a partir de sus datos de monitorización, que incluye desde la comprobación de la validez de los propios datos registrados hasta la detección y el diagnóstico de fallos, y que permite un conocimiento automatizado y detallado de las plantas. Dicho procedimiento está orientado a facilitar las tareas de operación y mantenimiento, de manera que se garantice una alta disponibilidad de funcionamiento de la instalación. De vuelta a la fase inicial de cálculo de las expectativas de producción, se utilizan los datos registrados en las centrales para llevar a cabo una mejora de los métodos de estimación de la radiación, que es la componente que más incertidumbre añade al proceso de modelado. El desarrollo y la aplicación de este procedimiento de control de calidad se han llevado a cabo en 39 grandes centrales fotovoltaicas, que totalizan una potencia de 250 MW, distribuidas por varios países de Europa y América Latina. ABSTRACT This thesis presents a comprehensive quality control procedure to be applied in photovoltaic plants, which covers from the initial phase of energy production estimation to the monitoring of the installation performance, once it is in operation. This protocol allows reducing the uncertainty associated to the photovoltaic plants behaviour and increases their long term reliability, therefore optimizing their performance. The situation of photovoltaic technology has drastically evolved in recent years, making photovoltaic plants capable of producing energy at fully competitive prices, in relation to other energy sources. This fact increases the requirements on the performance and reliability of these facilities. To meet this demand, it is necessary to adapt the quality control procedures and to develop new methods able to provide a more complete knowledge of the state of health of the plants, and able to maintain surveillance on them over time. In addition, the current meagre margins in which these installations operate require procedures capable of estimating energy production with the lower possible uncertainty during the design phase. The quality control procedure presented in this work starts from previous protocols oriented to the commissioning phase of a photovoltaic system, and complete them with procedures for the operation phase, paying particular attention to the major problems that arise in photovoltaic plants during their lifetime (hot spots, dust impact, ageing...). It also incorporates a protocol to control and analyse the installation performance directly from its monitoring data, which comprises from checking the validity of the recorded data itself to the detection and diagnosis of failures, and which allows an automated and detailed knowledge of the PV plant performance that can be oriented to facilitate the operation and maintenance of the installation, so as to ensure a high operation availability of the system. Back to the initial stage of calculating production expectations, the data recorded in the photovoltaic plants is used to improved methods for estimating the incident irradiation, which is the component that adds more uncertainty to the modelling process. The development and implementation of the presented quality control procedure has been carried out in 39 large photovoltaic plants, with a total power of 250 MW, located in different European and Latin-American countries.

Caracterização geométrica e mecânica de macrofibras poliméricas.

Uma grande diversidade de macrofibras poliméricas para reforço de concreto se encontram disponibilizadas hoje em dia. Por natureza estas fibras apresentam grande diversidade de características e propriedades. Estas variações afetam sua atuação como reforço no concreto. No entanto, não há normas brasileiras sobre o assunto e as metodologias de caracterização de normas estrangeiras apresentam divergências. Algumas normas definem que a caracterização do comportamento mecânico deva ser feita nos fios originais e outras que se devam utilizar métodos definidos para caracterização de materiais metálicos. A norma EN14889-2:2006 apresenta maior abrangência, mas deixa dúvidas quanto à adequação dos critérios de caracterização geométrica das fibras e não define um método de ensaio específico para sua caracterização mecânica. Assim, há a necessidade de estabelecimento de uma metodologia que permita a realização de um programa de controle de qualidade da fibra nas condições de emprego. Esta metodologia também proporcionaria uma forma de caracterização do material para estudos experimentais, o que permitiria maior fundamentação científica desses trabalhos que, frequentemente, fundamentam-se apenas em dados dos fabricantes. Assim, foi desenvolvido um estudo experimental focando a caracterização de duas macrofibras poliméricas disponíveis no mercado brasileiro. Focou-se o estudo na determinação dos parâmetros geométricos e na caracterização mecânica através da determinação da resistência à tração e avaliação do módulo de elasticidade. Na caracterização geométrica foi adotada como referência a norma europeia EN14889-2:2006. As medições do comprimento se efetuaram por dois métodos: o método do paquímetro e o método de análise de imagens digitais, empregando um software para processamento das imagens. Para a medição do diâmetro, além das metodologias mencionadas, foi usado o método da densidade. Conclui-se que o método do paquímetro, com o cuidado de esticar previamente as macrofibras, e o método das imagens digitais podem ser igualmente utilizados para medir o comprimento. Já parar determinar o diâmetro, recomenda-se o método da densidade. Quanto à caracterização mecânica, foi desenvolvida uma metodologia própria a partir de informações obtidas de outros ensaios. Assim, efetuaram-se ensaios de tração direta nas macrofibras coladas em molduras de tecido têxtil. Complementarmente, foi avaliado também o efeito do contato abrasivo das macrofibras com os agregados durante a mistura em betoneira no comportamento mecânico do material. Também se avaliou o efeito do método de determinação da área da seção transversal nos resultados medidos no ensaio de tração da fibra. Conclui-se que o método proposto para o ensaio de tração direta da fibra é viável, especialmente para a determinação da resistência à tração. O valor do módulo de elasticidade, por sua vez, acaba sendo subestimado. A determinação da área da seção da fibra através do método da densidade forneceu também os melhores resultados. Além disso, comprovou-se que o atrito das fibras com o agregado durante a mistura compromete o comportamento mecânico, reduzindo tanto a resistência quanto o módulo de elasticidade. Assim, pode-se afirmar que a metodologia proposta para o controle geométrico e mecânico das macrofibras poliméricas é adequada para a caracterização do material.