Tibial tunnel placement in posterior cruciate ligament reconstruction: a systematic review.

PURPOSE: Reconstruction of the posterior cruciate ligament (PCL) yields less satisfying results than anterior cruciate ligament reconstruction with respect to laxity control. Accurate tibial tunnel placement is crucial for successful PCL reconstruction using arthroscopic tibial tunnel techniques. A discrepancy between anatomical studies of the tibial PCL insertion site and surgical recommendations for tibial tunnel placement remains. The objective of this study was to identify the optimal placement of the tibial tunnel in PCL reconstruction based on clinical studies. METHODS: In a systematic review of the literature, MEDLINE, EMBASE, Cochrane Review, and Cochrane Central Register of Controlled Trials were screened for articles about PCL reconstruction from January 1990 to September 2011. Clinical trials comparing at least two PCL reconstruction techniques were extracted and independently analysed by each author. Only studies comparing different tibial tunnel placements in the retrospinal area were included. RESULTS: This systematic review found no comparative clinical trial for tibial tunnel placement in PCL reconstruction. Several anatomical, radiological, and biomechanical studies have described the tibial insertion sites of the native PCL and have led to recommendations for placement of the tibial tunnel outlet in the retrospinal area. However, surgical recommendations and the results of morphological studies are often contradictory. CONCLUSIONS: Reliable anatomical landmarks for tunnel placement are lacking. Future randomized controlled trials could compare precisely defined tibial tunnel placements in PCL reconstruction, which would require an established mapping of the retrospinal area of the tibial plateau with defined anatomical and radiological landmarks.

Ego identity in adolescence: preliminary validation of a French short-form of the EIPQ

Following the seminal work on personal identity of Erikson, Marcia's identity status model has been one of the most enduring paradigms. The Ego Identity Process Questionnaire (EIPQ; Balistreri, Busch-Rossnagel, & Geissinger, 1995) is a widely used measure of identity status. The purpose of this study was to evaluate the factor structure and the reliability of a French version of the EIPQ. The hypothesized structures were not confirmed. In light of the failed attempts to validate the original version, an alternative short-form version of the EIPQ (EIPQ-SF), maintaining the integrity of the original model, was developed in one sample and cross-validated in another sample. Additionally, theoretically consistent associations between the EIPQ-SF dimensions and self-esteem confirmed convergent validity. Globally, the results indicated that the French short-version of the EIPQ might be a useful instrument for the assessment of the identity statuses in adolescence and emerging adulthood.

[Code de l'urbanisme et de l'habitation, art. 257. Décret du 19-9-55 ; arrêté du 1-10-55 et circulaires des 6 octobre et 29 novembre 1955, du Ministère de la reconstruction et du logement. Edition mise à jour au 1er mars 1956.]

[Code]

Recueil des principaux textes concernant les dommages de guerre . [Publié par le Ministère de la Reconstruction et du logement. Edition mise à jour au 1er novembre 1955.]

[Code]

Development of Craniofacial Bone Defect Reconstruction Implant Based on Fibre-Reinforced Composite with Photopolymerisable Resin Systems. Experimental studies in vitro and in vivo.

Reconstruction of defects in the craniomaxillofacial (CMF) area has mainly been based on bone grafts or metallic fixing plates and screws. Particularly in the case of large calvarial and/or craniofacial defects caused by trauma, tumours or congenital malformations, there is a need for reliable reconstruction biomaterials, because bone grafts or metallic fixing systems do not completely fulfill the criteria for the best possible reconstruction methods in these complicated cases. In this series of studies, the usability of fibre-reinforced composite (FRC) was studied as a biostable, nonmetallic alternative material for reconstructing artificially created bone defects in frontal and calvarial areas of rabbits. The experimental part of this work describes the different stages of the product development process from the first in vitro tests with resin-impregnated fibrereinforced composites to the in vivo animal studies, in which this FRC was tested as an implant material for reconstructing different size bone defects in rabbit frontal and calvarial areas. In the first in vitro study, the FRC was polymerised in contact with bone or blood in the laboratory. The polymerised FRC samples were then incubated in water, which was analysed for residual monomer content by using high performance liquid chromatography (HPLC). It was found that this in vitro polymerisation in contact with bone and blood did not markedly increase the residual monomer leaching from the FRC. In the second in vitro study, different adhesive systems were tested in fixing the implant to bone surface. This was done to find an alternative implant fixing system to screws and pins. On the basis of this study, it was found that the surface of the calvarial bone needed both mechanical and chemical treatments before the resinimpregnated FRC could be properly fixed onto it. In three animal studies performed with rabbit frontal bone defects and critical size calvarial bone defect models, biological responses to the FRC implants were evaluated. On the basis of theseevaluations, it can be concluded that the FRC, based on E-glass (electrical glass) fibres forming a porous fibre veil enables the ingrowth of connective tissues to the inner structures of the material, as well as the bone formation and mineralization inside the fibre veil. Bone formation could be enhanced by using bioactive glass granules fixed to the FRC implants. FRC-implanted bone defects healed partly; no total healing of defects was achieved. Biological responses during the follow-up time, at a maximum of 12 weeks, to resin-impregnated composite implant seemed to depend on the polymerization time of the resin matrix of the FRC. Both of the studied resin systems used in the FRC were photopolymerised and the heat-induced postpolymerisation was used additionally.

Reconstruction of networks from their betweenness centrality

In this paper we study the reconstruction of a network topology from the values of its betweenness centrality, a measure of the influence of each of its nodes in the dissemination of information over the network. We consider a simple metaheuristic, simulated annealing, as the combinatorial optimization method to generate the network from the values of the betweenness centrality. We compare the performance of this technique when reconstructing different categories of networks –random, regular, small-world, scale-free and clustered–. We show that the method allows an exact reconstruction of small networks and leads to good topological approximations in the case of networks with larger orders. The method can be used to generate a quasi-optimal topology fora communication network from a list with the values of the maximum allowable traffic for each node.

Reconstruction of the join time-delay Doppler-scale reflectivity density in the wide-band regime. A frame theory based approach

The inverse scattering problem concerning the determination of the joint time-delayDoppler-scale reflectivity density characterizing continuous target environments is addressed by recourse to the generalized frame theory. A reconstruction formula,involving the echoes of a frame of outgoing signals and its corresponding reciprocalframe, is developed. A ‘‘realistic’’ situation with respect to the transmission ofa finite number of signals is further considered. In such a case, our reconstruction formula is shown to yield the orthogonal projection of the reflectivity density onto a subspace generated by the transmitted signals.

Toward a novel forensic intelligence model: systematic profiling of false identity documents

False identity documents represent a serious threat through their production and use in organized crime and by terrorist organizations. The present-day fight against this criminal problem and threats to national security does not appropriately address the organized nature of this criminal activity, treating each fraudulent document on its own during investigation and the judicial process, which causes linkage blindness and restrains the analysis capacity. Given the drawbacks of this case-by-case approach, this article proposes an original model in which false identity documents are used to inform a systematic forensic intelligence process. The process aims to detect links, patterns, and tendencies among false identity documents in order to support strategic and tactical decision making, thus sustaining a proactive intelligence-led approach to fighting identity document fraud and the associated organized criminality. This article formalizes both the model and the process, using practical applications to illustrate its powerful capabilities. This model has a general application and can be transposed to other fields of forensic science facing similar difficulties.

The Arcuated Lintel and the "Serlian Motif". Imperial Identity, Architectural and Symbolic Interactions in Ancient Rome

Essay on the origin, use and development of the arcuated lintel in ancient Rome and the configuration of the so– called ‘Serlian motif’. These architectural elements will be related to the architecture of prestige on its technical, functional, visual and symbolic sphere. Its depictions, in addition to buildings, can offer a rich repertory of images that speak about the relations between visual culture, religion and power. Furthermore, the analyzed motifs will become important elements of the Western cultural legacy for centuries. The analysis of these events will contribute to the comprehension of the role played by some resources of ancient Rome architecture of prestige and its success

Sparse image reconstruction on the sphere: implications of a new sampling theorem.

We study the impact of sampling theorems on the fidelity of sparse image reconstruction on the sphere. We discuss how a reduction in the number of samples required to represent all information content of a band-limited signal acts to improve the fidelity of sparse image reconstruction, through both the dimensionality and sparsity of signals. To demonstrate this result, we consider a simple inpainting problem on the sphere and consider images sparse in the magnitude of their gradient. We develop a framework for total variation inpainting on the sphere, including fast methods to render the inpainting problem computationally feasible at high resolution. Recently a new sampling theorem on the sphere was developed, reducing the required number of samples by a factor of two for equiangular sampling schemes. Through numerical simulations, we verify the enhanced fidelity of sparse image reconstruction due to the more efficient sampling of the sphere provided by the new sampling theorem.

The Application of 3D Reconstruction Techniques in the Analysis of Ancient Tarraco’s Urban Topography

The widespread implementation of GIS-based 3D topographical models has been a great aid in the development and testing of archaeological hypotheses. In this paper, a topographical reconstruction of the ancient city of Tarraco, the Roman capital of the Tarraconensis province, is presented. This model is based on topographical data obtained through archaeological excavations, old photographic documentation, georeferenced archive maps depicting the pre-modern city topography, modern detailed topographical maps and differential GPS measurements. The addition of the Roman urban architectural features to the model offers the possibility to test hypotheses concerning the ideological background manifested in the city shape. This is accomplished mainly through the use of 3D views from the main city accesses. These techniques ultimately demonstrate the ‘theatre-shaped’ layout of the city (to quote Vitrubius) as well as its southwest oriented architecture, whose monumental character was conceived to present a striking aspect to visitors, particularly those arriving from the sea.

Forensic processing of false identity and travel documents to produce intelligence: a novel approach to assist in fighting organized crime

The production and use of false identity and travel documents in organized crime represent a serious and evolving threat. However, a case-by-case perspective, thus suffering from linkage blindness and a limited analysis capacity, essentially drives the present-day fight against this criminal problem. To assist in overcoming these limitations, a process model was developed using a forensic perspective. It guides the systematic analysis and management of seized false documents to generate forensic intelligence that supports strategic and tactical decision-making in an intelligence-led policing approach. The model is articulated on a three-level architecture that aims to assist in detecting and following-up on general trends, production methods and links between cases or series. Using analyses of a large dataset of counterfeit and forged identity and travel documents, it is possible to illustrate the model, its three levels and their contribution. Examples will point out how the proposed approach assists in detecting emerging trends, in evaluating the black market's degree of structure, in uncovering criminal networks, in monitoring the quality of false documents, and in identifying their weaknesses to orient the conception of more secured travel and identity documents. The process model proposed is thought to have a general application in forensic science and can readily be transposed to other fields of study.

Transsexualisme: enjeux et spécificités liés à la prise en charge d'une demande de réassignation sexuelle [Gender identity disorder: challenges and specificity in the treatment of requests for sexual reassignment].

Gender identity disorder is defined as a permanent desire to relieve one's own sexual features to acquire the sexual features and line to life of the opposite sex. The diagnosis is based on the psychiatric evaluation and treatment on an interdisciplinary approach by endocrinologists, surgeons and psychiatrists, and can be conceptualized into distinct phases: diagnostic evaluation, real life experience, hormonal treatment and surgery. Multiples challenges have to be faced, especially by the psychiatrist who follows the patient during the whole process.