Octanol-water partition coefficients for predicting the effects of tannins in ruminant nutrition

Tannins can cause beneficial or harmful nutritional effects, but their great diversity has until now prevented a rational distinction between tannin structures and their nutritional responses. An attempt has been made to study this problem by examining the octanol-water solubilities of tannins. A relatively simple HPLC method has been developed for screening mixtures of plant tannins for their octanol-water partition coefficients (K-ow coefficients). Tannins were isolated from the fruits and leaves of different Acacia, Calliandra, Dichrostachys, and Piliostigma species, which are known to produce beneficial or harmful effects. The K-ow coefficients of these tannins ranged from 0.061 to 13.9, average coefficients of variation were 9.2% and recoveries were 107%. Acacia nilotica fruits and leaves had the highest K-ow coefficients, that is, 2.0 and 13.9, respectively. These A. nilotica products also have high concentrations of tannins. The combined effects of high octanol solubilities and high tannin concentrations may explain their negative effects on animal nutrition and health. It is known that compounds with high octanol solubilities are more easily absorbed into tissues, and it is, therefore, proposed that such compounds are more likely to cause toxicity problems especially if consumed in large quantities. According to the literature, tannins in human foods tend to have low K-ow coefficients, and this was confirmed for the tannins in Piliostigma thonningii fruits. Therefore, unconventional feeds or browse products should be screened not only for their tannin concentrations but also for low octanol-water partition coefficients in order to identify nutritionally safe feeds and to avoid potentially toxic feeds.

An investigation into the extraction of americium(III), lanthanides and D-block metals by 6,6 '-bis-(5,6-dipentyl-[1,2,4]triazin-3-yl)-[2,2 ']bipyridinyl(C-5-BTBP)

The tetradentate ligand (C-5-BTBP) was able to extract americium(III) selectively from nitric acid. In octanol/kerosene the distribution ratios suggest that stripping will be possible. C-5-BTBP has unusual properties and potentially offers a means of separating metals, which otherwise are difficult to separate. For example C-5-BTBP has the potential to separate paliadium(II) from a mixture containing rhodium(III) and ruthenium(H) nitrosyl. In addition, C-5-BTBP has the potential to remove traces of cadmium from effluent or from solutions of other metals contaminated with cadmium. C-5-BTBP has potential as a reagent for the separation of americium(III) from solutions contaminated with iron(III) and nickel(II), hence offering a means of concentrating americium(III) for analytical purposes from nitric acid solutions containing high concentrations of iron(III) or nickel(II).

Introducing assistive technology into the homes of older people: Some lessons from the Netherlands - A case study

The authors have just completed a study of assistive technology (AT) and how it can be introduced into the existing homes of older people. As part of this empirical study some collaboration with the Netherlands took place for two reasons. First to learn about the use of assistive technology from a country where its creative use was well established and second to learn how older people influence policy. Two Dutch consultants helped the team and a short visit was paid to Eindhoven. As a result of this collaboration new ways of using AT were found and comparisons made with the policy and legislative background. In addition lessons were drawn about the involvement of older people.

An investigation into the mechanics of cutting using data from orthogonally cutting Nylon 66

Cutting force data for Nylon 66 has been examined in terms of various different models of cutting. Theory that includes significant work of separation at the tool tip was found to give the best correlation with experimental data over a wide range of rake angles for derived primary shear plane angle. A fracture toughness parameter was used as the measure of the specific work of separation. Variation in toughness with rake angle determined from cutting is postulated to be caused by mixed mode separation at the tool tip. A rule of mixtures using independently determined values of toughness in tension (mode 1) and shear (mode 11) is found to describe well the variation with rake angle. The ratio of modes varies with rake angle and, in turn, with the primary shear plane angle. Previous suggestions that cutting is a means of experimentally determining fracture toughness are now seen to be extended to identify the mode of fracture toughness as well.

Evaluation of the inclusion of a mixture of organic acids or lactulose into the feed of pigs experimentally challenged with Salmonella Typhimurium

A mixture of organic acids and lactulose for preventing or reducing colonization of the gut by Salmonella Typhimurium was evaluated in pigs. A total of 63 4-week-old commercial piglets were randomly distributed into three different experimental dietary groups: a plain diet without additives (PD) and the same diet supplemented with either 0.4% (w/v) formic acid and 0.4% lactic acid (w/v) (AC) or 1% (w/v) lactulose (LC). After 7 days of adaptation, two-thirds of the pigs (14 from each diet) were challenged with a 2-mL oral dose of 10(8) CFU/mL of Salmonella Typhimurium, leaving the remaining animals unchallenged (UC). After 4 and 10 days post-challenge, pigs were euthanized and the ileum and caecum content were aseptically sampled to (a) quantify lactic, formic, and short-chain fatty acids (SCFA), (b) quantify bacterial populations and Salmonella by fluorescence in situ hybridization and (c) qualitatively analyse bacterial populations through denaturing gradient gel electrophoresis (DGGE). Modification of fermentation products and counts of some of the bacterial groups analysed in the challenged pigs receiving the treatments AC and LC were minimal. Treatments only influenced the bacterial diversity after 10 days post-challenge, with AC generating a lower number of DGGE bands than UC(P < 0.05). Neither the inclusion of a mixture of 0.4% (w/v) formic and 0.4% (w/v) lactic acids nor of 1% (w/v) lactulose in the feed influenced numbers of Salmonella in the ileum and caecum of experimentally challenged pigs. (C) 2009 Elsevier B.V. All rights reserved.

An insight into the mechanism of protein separation by colloidal gas aphrons (CGA) generated from ionic surfactants

Colloidal gas aphrons (CGA), which are surfactant stabilised microbubbles, have been previously applied for the recovery of proteins from model mixtures and a few studies have demonstrated the potential of these dispersions for the selective recovery of proteins from complex mixtures. However there is a lack of understanding of the mechanism of separation and forces governing the selectivity of the separation. In this paper a mechanistic study is carried out to determine the main factors and forces influencing the selectivity of separation of whey proteins with CGA generated from ionic surfactants. Two different separation strategies were followed: (i) separation of lactoferrin and lactoperoxidase by anionic CGA generated from a solution of sodium bis-(2-ethyl hexyl) sulfosuccinate (AOT); (ii) separation of beta-lactoglobulin by cationic CGA generated from a solution of cetyltrimethylammonium bromide (CTAB). Separation results indicate that electrostatic interactions are the main forces determining the selectivity however these could not completely explain the selectivities obtained following both strategies. Protein-surfactant interactions were studied by measuring the zeta potential changes on individual proteins upon addition of surfactant and at varying pH. Interestingly strongest electrostatic interactions were measured at those pH and surfactant to protein mass ratios which were optimum for protein separation. Effect of surfactant on protein conformation was determined by measuring the change in fluorescence intensity upon addition of surfactant at varying pH. Differences in the fluorescence patterns were detected among proteins which were correlated to differences in their conformational features which could in turn explain their different separation behaviour. The effect of conformation on selectivity was further proven by experiments in which conformational changes were induced by pre-treatment of whey (heating) and by storage at 4 degrees C. Overall it can be concluded that separation of proteins by ionic CGA is driven mainly by electrostatic interactions however conformational features will finally determine the selectivity of the separation with competitive adsorption having also an effect. (c) 2006 Elsevier B.V. All rights reserved.

Investigation into the performance of an algorithm for deriving concise descriptions of optic flow fields for real-time control

This paper describes a region-based algorithm for deriving a concise description of a first order optical flow field. The algorithm described achieves performance improvements over existing algorithms without compromising the accuracy of the flow field values calculated. These improvements are brought about by not computing the entire flow field between two consecutive images, but by considering only the flow vectors of a selected subset of the images. The algorithm is presented in the context of a project to balance a bipedal robot using visual information.

A study into the impact of introducing Year 5 students to university and electronic engineering

This paper demonstrates the benefits of introducing Year 5 school students to university life, encountering styles of teaching to which they would be otherwise unaccustomed; and the results of a survey conducted both before and after the study visit to determine whether the visit was beneficial to the students in academic terms.

Cellular and molecular investigations into the development of the pectoral girdle

The forelimbs of higher vertebrates are composed of two portions: the appendicular region (stylopod, zeugopod and autopod) and the less prominent proximal girdle elements (scapula and clavicle) that brace the limb to the main trunk axis. We show that the formation of the muscles of the proximal limb occurs through two distinct mechanisms. The more superficial girdle muscles (pectoral and latissimus dorsi) develop by the “In–Out” mechanism whereby migration of myogenic cells from the somites into the limb bud is followed by their extension from the proximal limb bud out onto the thorax. In contrast, the deeper girdle muscles (e.g. rhomboideus profundus and serratus anterior) are induced by the forelimb field which promotes myotomal extension directly from the somites. Tbx5 inactivation demonstrated its requirement for the development of all forelimb elements which include the skeletal elements, proximal and distal muscles as well as the sternum in mammals and the cleithrum of fish. Intriguingly, the formation of the diaphragm musculature is also dependent on the Tbx5 programme. These observations challenge our classical views of the boundary between limb and trunk tissues. We suggest that significant structures located in the body should be considered as components of the forelimb.

Internal rents and corporate property management: a study into the use of internal rents in UK corporate organisations

Research in the late 1980s showed that in many corporate real estates users were not fully aware of the full extent of their property holdings. In many cases, not only was the value of the holdings unknown, but there was uncertainty over the actual extent of ownership within the portfolio. This resulted in a large number of corporate occupiers reviewing their property holdings during the 1990s, initially to create a definitive asset register, but also to benefit from an more efficient use of space. Good management of corporately owned property assets is of equal importance as the management of other principal resources within the company. A comprehensive asset register can be seen as the first step towards a rational property audit. For the effective, efficient and economic delivery of services, it is vital that all property holdings are utilised to the best advantage. This requires that the property provider and the property user are both fully conversant with the value of the property holding and that an asset/internal rent/charge is made accordingly. The advantages of internal rent charging are twofold. Firstly, it requires the occupying department to “contribute” an amount to the business equivalent to the open market rental value of the space that it occupies. This prevents the treating of space as a free good and, as individual profit centres, each department will then rationalise its holdings to minimise its costs. The second advantage is from a strategic viewpoint. By charging an asset rent, the holding department can identify the performance of its real estate holdings. This can then be compared to an internal or external benchmark to help determine whether the company has adopted the most efficient tenure pattern for its properties. This paper investigates the use of internal rents by UK-based corporate businesses and explains internal rents as a form of transfer pricing in the context of management and responsibility accounting. The research finds that the majority of charging organisations introduced internal rents primarily to help calculate true profits at the business unit level. However, less than 10% of the charging organisations introduced internal rents primarily to capture the return on assets within the business. There was also a sizeable element of the market who had no plans to introduce internal rents. Here, it appears that, despite academic and professional views that internal rents are beneficial in improving the efficient use of property, opinion at the business and operational level has not universally accepted this proposition.

Molecular dynamics simulation insight into the mechanism of phenol adsorption at low coverages from aqueous solutions on microporous carbons

MD simulation studies showing the influence of porosity and carbon surface oxidation on phenol adsorption from aqueous solutions on carbons are reported. Based on a realistic model of activated carbon, three carbon structures with gradually changed microporosity were created. Next, a different number of surface oxygen groups was introduced. The pores with diameters around 0.6 nm are optimal for phenol adsorption and after the introduction of surface oxygen functionalities, adsorption of phenol decreases (in accordance with experimental data) for all studied models. This decrease is caused by a pore blocking effect due to the saturation of surface oxygen groups by highly hydrogen-bounded water molecules.