Macro fiber composite (MFC) as a delamination sensor in antisymmetric laminates

The change in extension-twist Coupling due to delamination in antisymmetric laminates is experimentally measured. Experimental results are compared with the results from analytical expression existing in literature and finite element analysis. The application of the Macro-Fiber Composite (MFC) developed at the NASA Langley Research Center for sensing the delamination in the laminates is investigated. While many applications have been reported in the literature using the MFC as an actuator, here its use as a twist sensor has been studied. The real-life application envisaged is structural health monitoring of laminated composite flexbeams taking advantage of the symmetry in the structure. Apart from the defect detection under symmetric conditions, other methods of health monitoring for the same structure are reported for further validation. Results show that MFC works well as a sensor.

Physical activity and diabetic complications in patients with type 1 diabetes

Type 1 diabetes is associated with the risk for late diabetic complications which are divided into microvascular (retinopathy, nephropathy, and neuropathy) and macrovascular (cardiovascular disease, CVD) diseases. The risk for diabetic complication can be reduced by effective treatment, most importantly the glycaemic control. Glycaemia in type 1 diabetes is influenced by the interplay between insulin injections and lifestyle factors such as physical activity and diet. The effect of physical activity in patients with type 1 diabetes is not well known, however. The aim of this thesis was to investigate the physical activity and the physical fitness of patients with type 1 diabetes with special emphasis on glycaemic control and the diabetic complications. The patients included in the study were all part of the nationwide, multicenter Finnish Diabetic Nephropathy (FinnDiane) Study which aims to characterise genetic, clinical, and environmental factors that predispose to diabetic complications in patients with type 1 diabetes. In addition, subjects from the IDentification of EArly mechanisms in the pathogenesis of diabetic Late complications (IDEAL) Study were studied. Physical activity was assessed in the FinnDiane Study in 1945 patients by a validated questionnaire. Physical fitness was measured in the IDEAL Study by spiroergometry (cycle test with measurement of respiratory gases) in 86 young adults with type 1 diabetes and in 27 healthy controls. All patients underwent thorough clinical characterisation of their diabetic complication status. Four substudies were cross-sectional using baseline data and one study additionally used follow-up data. Physical activity, especially the intensity of activities, was reduced in patients affected by diabetic nephropathy, retinopathy, and CVD. Low physical activity was associated with poor glycaemic control, a finding most clear in women and evident also in patients with no signs of diabetic complications. Furthermore, low physical activity was associated with a higher HbA1c variability, which in turn was associated with the progression of renal disease and CVD during follow-up. A higher level of physical activity was also associated with better insulin sensitivity. The prevalence of the metabolic syndrome in type 1 diabetes was also lower the higher the physical activity. The aerobic physical fitness level of young adults with type 1 diabetes was reduced compared with healthy peers and in men an association between higher fitness level and lower HbA1c was observed. In patients with type 1 diabetes, a higher physical activity was associated with better glycaemic control and may thus be beneficial with respect to the prevention of diabetic complications.

Suomalaisen alkuperäiskarjan liha – kuluttajien osto- ja maksuhalukkuus

Tutkielman tavoitteena on selvittää suomalaisen alkuperäiskarjan lihan potentiaalista kysyntää. Alkuperäiskarjan lihan erikoistuotemarkkinat voivat auttaa pitämään uhanalaiset, kotimaiset karjarodut tuotantokäytössä. Näin ollen erikoistuotemarkkinat voivat auttaa arvokkaiden suomalaisten eläingeenivarojen säilyttämisessä. Koska alkuperäiskarjan lihan tuotannon kannattavuus riippuu lihasta saatavasta lisähinnasta, tutkimuksen tavoitteena on myös tutkia, millainen kuluttajien maksuhalukkuus alkuperäiskarjan lihasta on verrattuna tavanomaiseen lihaan. Tutkimusaineisto kerättiin Maa- ja elintarviketalouden tutkimuskeskuksen ja Kuluttajatutkimuskeskuksen suunnittelemalla kyselytutkimuksella keväällä 2010. Tutkimuksessa käytettiin ehdollisen käyttäytymisen ja ehdollisen arvottamisen menetelmiä ja sen otoskoko on 1623. Kuluttajien ostohalukkuutta ja siihen vaikuttavia tekijöitä tutkittiin sekä binäärisen että ordinaalisen regression malleilla. Kuluttajien maksuhalukkuutta alkuperäiskarjan lihasta ja siihen vaikuttavia tekijöitä tutkittiin grouped data -mallin avulla. Malleissa käytettiin selittävinä muuttujina sosioekonomisten muuttujien lisäksi kuluttajien asenteita ja käyttäytymistä kuvaavia muuttujia. Tutkielman tulosten mukaan jopa 86 % vastaajista ostaisi alkuperäiskarjan lihaa, jos sitä olisi tarjolla kaupoissa. Ostohalukkuutta lisää muun muassa, jos vastaajalla on alle 18-vuotiaita lapsia ja vastaaja arvostaa lähellä tuotettua, paikallista ruokaa sekä ympäristöystävällisyyttä. Miehet ostaisivat alkuperäiskarjan lihaa todennäköisemmin kuin naiset. Suurin osa vastaajista ostaisi alkuperäiskarjan lihaa, jos se olisi samanhintaista kuin tavanomainen liha, mutta noin neljäsosa (23,5 %) vastaajista olisi valmis maksamaan alkuperäiskarjan lihasta korkeampaa hintaa kuin tavanomaisesta lihasta. Maksuhalukkuuteen vaikuttivat positiivisesti muun muassa kuuluminen ympäristöjärjestöön ja korkea tulotaso. Negatiivisesti vaikutti puolestaan esimerkiksi se, että vastaaja on nainen. Keskimääräinen maksuhalukkuus alkuperäiskarjan lihasta oli 6,25 % korkeampi kuin tavanomaisesta lihasta. Maksuhalukkuus alkuperäiskarjan lihasta oli selvästi yhteydessä siihen, kuinka usein vastaaja olisi halukas ostamaan sitä. Maksuhalukkuus oli korkein niillä vastaajilla, jotka haluaisivat ostaa lihaa säännöllisesti.

Talouskäsitysten vaikutus hallituksen suosioon Puolassa 2006–2007

Tutkimuksessa tarkastellaan äänestäjien talouskäsitysten vaikutusta hallituksen suosioon Puolassa vuosina 2006 ja 2007. Tutkimusasetelma juontaa juurensa poliittisten suhdannevaihteluiden teoriaan, jonka mukaan poliitikot pyrkivät manipuloimaan taloutta vaalien alla tullakseen uudelleen valituiksi. Vastuullisuushypoteesin mukaan äänestäjät palkitsevat poliitikot hyvästä taloustilanteesta. Näin ollen mikäli äänestäjät ovat tyytyväisiä talouteen he äänestävät hallitusta. Mikäli eivät, he äänestävät oppositiota. Miten äänestäjät sitten tekevät arvionsa taloudesta? Tutkielmassa selvitetään vaikuttiko äänestäjien mielipiteisiin käsitys nykyisestä vai tulevaisuuden taloustilanteesta. Käsitys nykyisestä taloustilanteesta perustuu havaintoihin jo toteutuneesta talouspolitiikasta. Tätä käsitystä kutsutaan retrospektiiviseksi näkemykseksi. Prospektiiviset talousnäkemykset koostuvat näkemyksestä ja odotuksista talouden tulevasta tilasta ja uskosta hallituksen kykyyn tarjota paras vaihtoehto suotuisalle talouskehitykselle. Aikaulottuvuuden lisäksi tutkielmassa testataan, vaikuttaako äänestäjiin enemmän heidän oma taloustilanteensa vai näkemys yleisestä talouden tilanteesta. Mikäli hallituksen suosio perustuu näkemyksiin henkilökohtaisen talouden tilasta, ovat äänestäjät egotrooppisia. Mikäli kannatuspäätös perustuu näkemykseen kansantalouden tilasta, ovat äänestäjät puolestaan sosiotrooppisia. Aineistona tutkielmassa käytetään uusinta saatavilla olevaa Puolan mielipidetiedustelun (Centrum Badania Opinii Publicznej) keräämää kyselyaineistoa vuosilta 2006 ja 2007. Tutkielmassa on yhdistetty kyselyaineistot 22:n kuukauden ajalta. Aineistoa on analysoitu logistisen regressioanalyysin menetelmin. Tutkielman perusteella talousnäkemyksistä suurin vaikutus hallituksen suosioon on äänestäjien näkemyksillä kansantalouden tulevaisuuden tilasta. Henkilökohtaisen talouden osalta positiiviset tulevaisuudennäkymät vaikuttavat positiivisesti myös hallituksen kannatukseen. Retrospektiivinen arvio henkilökohtaisesta taloudesta toimii kuitenkin teorian vastaisesti; oman taloudellisen tilanteen hyväksi arvioineiden todennäköisyys kannatta hallitusta oli pienempää kuin niillä, jotka arvioivat oman taloustilanteensa huonoksi. Kontrollimuuttujiksi valittiin joukko aiemmassa tutkimuksessa äänestyskäyttäytymiseen Puolassa vaikuttaneita tekijöitä. Näitä olivat ikä, sukupuoli, koulutus, asuinpaikka, näkemys työllisyystilanteesta, ideologinen sijoittuminen oikeisto–vasemmisto-akselilla sekä uskonnollisuus. Kontrollimuuttujista merkitseviksi osoittautuivat uskonnollisuus, oikeisto–vasemmisto-ideologia, koulutus, asuinpaikka sekä ikä. Kun edellä mainitut taustamuuttujat on kontrolloitu, taloustekijät selittävät noin viidesosan hallituksen kannatuksen todennäköisyyden vaihtelusta.

Advances in the analysis and design of concrete structures, metal containments and liner plate for extreme loads

The material presented in this paper summarizes the progress that has been made in the analysis, design, and testing of concrete structures. The material is summarized in the following documents: 1. Part I - Containment Design Criteria and Loading Combinations - J.D. Stevenson (Stevenson and Associates, Cleveland, Ohio, USA) 2. Part II - Reinforced and Prestressed Concrete Behavior - J. Eibl and M. Curbach (Karlsruhe University, Karlsruhe, Germany) 3. Part III - Concrete Containment Analysis, Design and Related Testing - T.E. Johnson and M.A. Daye (Bechtel Power Corporation, Gaithersburg, Maryland USA) 4. Part IV - Impact and Impulse Loading and Response Prediction - J.D. Riera (School of Engineering - UFRGS, Porto Alegre, RS, Brazil) 5. Part V - Metal Containments and Liner Plate Systems - N.J. Krutzik (Siemens AG, Offenbach Am Main, Germany) 6. Part VI - Prestressed Reactor Vessel Design, Testing and Analysis - J. Nemet (Austrian Research Center, Seibersdorf, Austria) and K.T.S. Iyengar (Indian Institute of Science, Bangalore, India).

Recent Advances in Low CTE and High Density System-on-a-Package (SOP) Substrate with Thin Film Component Integration

The Packaging Research Center has been developing next generation system-on-a-package (SOP) technology with digital, RF, optical, and sensor functions integrated in a single package/module. The goal of this effort is to develop a platform substrate technology providing very high wiring density and embedded thin film passive and active components using PWB compatible materials and processes. The latest SOP baseline process test vehicle has been fabricated on novel Si-matched CTE, high modulus C-SiC composite core substrates using 10mum thick BCB dielectric films with loss tangent of 0.0008 and dielectric constant of 2.65. A semi-additive plating process has been developed for multilayer microvia build-up using BCB without the use of any vacuum deposition or polishing/CMP processes. PWB and package substrate compatible processes such as plasma surface treatment/desmear and electroless/electrolytic pulse reverse plating was used. The smallest line width and space demonstrated in this paper is 6mum with microvia diameters in the 15-30mum range. This build-up process has also been developed on medium CTE organic laminates including MCL-E-679F from Hitachi Chemical and PTFE laminates with Cu-Invar-Cu core. Embedded decoupling capacitors with capacitance density of >500nF/cm2 have been integrated into the build-up layers using sol-gel synthesized BaTiO3 thin films (200-300nm film thickness) deposited on copper foils and integrated using vacuum lamination and subtractive etch processes. Thin metal alloy resistor films have been integrated into the SOP substrate using two methods: (a) NiCrAlSi thin films (25ohms per square) deposited on copper foils (Gould Electronics) laminated on the build-up layers and two step etch process for resistor definition, and (b) electroless plated Ni-W-P thin films (70 ohms to few Kohms per square) on the BCB dielectric by plasma surface treatment and activation. The electrical design and build-up layer structure along- - with key materials and processes used in the fabrication of the SOP4 test vehicle were presented in this paper. Initial results from the high density wiring and embedded thin film components were also presented. The focus of this paper is on integration of materials, processes and structures in a single package substrate for system-on-a-package (SOP) implementation

Modeling of Piezocomposites using Variational Asymptotic Method

This work presents the development of piezocomposites made up of Macro Fiber Composites (MFCs) for aerospace applications and specifically involves, their computational analysis, material characterization and certain parametric studies. MFC was developed by NASA Langley Research Center in 1996 and currently is being distributed by Smart Material Co. 1] worldwide and finds applications both as an actuator as well as for sensor in various engineering applications. In this work, MFC is being modeled as an actuator and a theoretical formulation based on Variational Asymptotic Method (VAM) 2] is presented to analyse the laminates made up of MFCs. VAM minimizes the total electro-mechanical energy for the MFC laminate and approaches the exact solution asymptotically by making use of certain small parameters inherent to the problem through dimensional reduction. VAM provides closed form solutions for 1D constitutive law, recovery relations of warpings, 3D stress/strain fields and displacements and hence an ideal tool for carrying out parametric and design studies in such applications. VAM is geometrically exact and offers rigorous material characterization through cross-sectional analysis and dimensional reduction.

Large Scale Numerical Simulations For Multi-Phase Fluid Dynamics With Moving Interfaces

This short communication presents our recent studies to implement numerical simulations for multi-phase flows on top-ranked supercomputer systems with distributed memory architecture. The numerical model is designed so as to make full use of the capacity of the hardware. Satisfactory scalability in terms of both the parallel speed-up rate and the size of the problem has been obtained on two high rank systems with massively parallel processors, the Earth Simulator (Earth simulator research center, Yokohama Kanagawa, Japan) and the TSUBAME (Tokyo Institute of Technology, Tokyo, Japan) supercomputers.

PICES Press, Vol. 10, No. 2, July 2002

International symposium on North Pacific transitional areas [pp. 1-4] [pdf, 0.8 Mb] PICES Volunteer Observing Ship (VOS) Workshop [pp. 5-7] [pdf, 0.3 Mb] Joint meeting on Causes of marine mortality of salmon [pp. 8-9] [pdf, 0.3 Mb] The state of the western North Pacific in the second half of 2001 [pp. 10-11] [pdf, 0.5 Mb] State of the eastern North Pacific in spring 2002 [pp. 12-13] [pdf. 0.4 Mb] The status of the Bering Sea in the second half of 2001 [pp. 14-15] [pdf. 0.3 Mb] PICES Workshop on “Perturbation analysis” on subarctic Pacific gyre ecosystem models [pp. 16-17] [pdf. 0.4 Mb] Status and future plans for SOLAS-Japan [pp. 18-20] [pdf. 0.5 Mb] China-Korea Joint Ocean Research Center: A bridge across the Yellow Sea to connect Chinese and Korean oceanographic institutes and scientists [pp. 21-22] [pdf. 0.3 Mb] Persistent changes in the California Current ecosystem [pp. 23-24] [pdf. 0.2 Mb] The Hokusei Maru: 53 years of research in the Pacific [pp. 25-28] [pdf. 0.5 Mb] First meeting of the CLIVAR Pacific Panel [pp. 29-30] [pdf. 0.3 Mb] Call for contributions to the North Pacific Ecosystem Status Report [p. 31] [pdf. 0.2 Mb] PICES announcements [p. 32] [pdf. 0.2 Mb]

PICES Press, Vol. 6, No. 1, January 1998

Highlights of PICES VI The state of the eastern North Pacific in the first half of 1997 The state of the western North Pacific in the first half of 1997 The status of the Bering Sea in the first eight month of 1997 Organization of fisheries, environmental and ocean science in Canada Richard James Beamish PICES-GLOBEC Climate Change and Carrying Capacity Program Epipelagic fish production in the open Subarctic Pacific: bottom up or self-regulating control? Activity Report of SCOR Working Group 105 Establishment of Marine Information Research Center: new strategy on oceanographic data management in Japan Bering Sea Ecosystem Biophysical Metadatabase: a collaborative research tool for fisheries-oceanography and ecosystem investigations

Metadata Federation of PICES Member Countries

(Document pdf contains 193 pages) Executive Summary (pdf, < 0.1 Mb) 1. Introduction (pdf, 0.2 Mb) 1.1 Data sharing, international boundaries and large marine ecosystems 2. Objectives (pdf, 0.3 Mb) 3. Background (pdf, < 0.1 Mb) 3.1 North Pacific Ecosystem Metadatabase 3.2 First federation effort: NPEM and the Korea Oceanographic Data Center 3.2 Continuing effort: Adding Japan’s Marine Information Research Center 4. Metadata Standards (pdf, < 0.1 Mb) 4.1 Directory Interchange Format 4.2 Ecological Metadata Language 4.3 Dublin Core 4.3.1. Elements of DC 4.4 Federal Geographic Data Committee 4.5 The ISO 19115 Metadata Standard 4.6 Metadata stylesheets 4.7 Crosswalks 4.8 Tools for creating metadata 5. Communication Protocols (pdf, < 0.1 Mb) 5.1 Z39.50 5.1.1. What does Z39.50 do? 5.1.2. Isite 6. Clearinghouses (pdf, < 0.1 Mb) 7. Methodology (pdf, 0.2 Mb) 7.1 FGDC metadata 7.1.1. Main sections 7.1.2. Supporting sections 7.1.3. Metadata validation 7.2 Getting a copy of Isite 7.3 NSDI Clearinghouse 8. Server Configuration and Technical Issues (pdf, 0.4 Mb) 8.1 Hardware recommendations 8.2 Operating system – Red Hat Linux Fedora 8.3 Web services – Apache HTTP Server version 2.2.3 8.4 Create and validate FGDC-compliant Metadata in XML format 8.5 Obtaining, installing and configuring Isite for UNIX/Linux 8.5.1. Download the appropriate Isite software 8.5.2. Untar the file 8.5.3. Name your database 8.5.4. The zserver.ini file 8.5.5. The sapi.ini file 8.5.6. Indexing metadata 8.5.7. Start the Clearinghouse Server process 8.5.8. Testing the zserver installation 8.6 Registering with NSDI Clearinghouse 8.7 Security issues 9. Search Tutorial and Examples (pdf, 1 Mb) 9.1 Legacy NSDI Clearinghouse search interface 9.2 New GeoNetwork search interface 10. Challenges (pdf, < 0.1 Mb) 11. Emerging Standards (pdf, < 0.1 Mb) 12. Future Activity (pdf, < 0.1 Mb) 13. Acknowledgments (pdf, < 0.1 Mb) 14. References (pdf, < 0.1 Mb) 15. Acronyms (pdf, < 0.1 Mb) 16. Appendices 16.1. KODC-NPEM meeting agendas and minutes (pdf, < 0.1 Mb) 16.1.1. Seattle meeting agenda, August 22–23, 2005 16.1.2. Seattle meeting minutes, August 22–23, 2005 16.1.3. Busan meeting agenda, October 10–11, 2005 16.1.4. Busan meeting minutes, October 10–11, 2005 16.2. MIRC-NPEM meeting agendas and minutes (pdf, < 0.1 Mb) 16.2.1. Seattle Meeting agenda, August 14-15, 2006 16.2.2. Seattle meeting minutes, August 14–15, 2006 16.2.3. Tokyo meeting agenda, October 19–20, 2006 16.2.4. Tokyo, meeting minutes, October 19–20, 2006 16.3. XML stylesheet conversion crosswalks (pdf, < 0.1 Mb) 16.3.1. FGDCI to DIF stylesheet converter 16.3.2. DIF to FGDCI stylesheet converter 16.3.3. String-modified stylesheet 16.4. FGDC Metadata Standard (pdf, 0.1 Mb) 16.4.1. Overall structure 16.4.2. Section 1: Identification information 16.4.3. Section 2: Data quality information 16.4.4. Section 3: Spatial data organization information 16.4.5. Section 4: Spatial reference information 16.4.6. Section 5: Entity and attribute information 16.4.7. Section 6: Distribution information 16.4.8. Section 7: Metadata reference information 16.4.9. Sections 8, 9 and 10: Citation information, time period information, and contact information 16.5. Images of the Isite server directory structure and the files contained in each subdirectory after Isite installation (pdf, 0.2 Mb) 16.6 Listing of NPEM’s Isite configuration files (pdf, < 0.1 Mb) 16.6.1. zserver.ini 16.6.2. sapi.ini 16.7 Java program to extract records from the NPEM metadatabase and write one XML file for each record (pdf, < 0.1 Mb) 16.8 Java program to execute the metadata extraction program (pdf, < 0.1 Mb) A1 Addendum 1: Instructions for Isite for Windows (pdf, 0.6 Mb) A2 Addendum 2: Instructions for Isite for Windows ADHOST (pdf, 0.3 Mb)