1000 resultados para Frutas – Indústria
Resumo:
Chemical industry underwent a significant upturn in the past few years. In Brazil, the position of this industry has been continuously strengthened as the second largest industrial sector. Current circumstances are discussed, especially the need for increased innovation, the impacts of nanotechnology, biotechnology and information technologies. Some misconceptions on the Brazilian chemical industry are criticized and recent improvements are described, including those related to environmental protection, to conclude that its prospects are very good, considering both the availability of basic raw materials (oil, natural gas, agribusiness products and minerals), the growing demand and increased competitiveness.
Resumo:
The production and use of nitroaromatic explosives have resulted in their dissemination into the environment, where their presence in waterways and soil represents an ecological and health hazard. The hazardous characteristics of these compounds need to be carefully studied, so that the impact of their discharge on the environment can be better evaluated. This work presents the characterization of wastewater from Brazilian TNT industry using as analytical techniques mass spectroscopy, chromatography, toxicity assays and other physico-chemical analyses.
Resumo:
Dregs is an alkaline solid by-product generated in the cellulose manufacturing industry that could be used to correct soil acidity. The present study aimed to evaluate the chemical composition of this product and some of its properties. The dregs presented 354 g kg-1 of calcium, neutralization capacity of 80.3%, and pH 10.7, besides low concentration of sodium (10.2 g kg-1), lead (62.9 mg kg-1) and cadmium (5.6 mg kg-1). Thus, it is a product that can safely be used to increase the soil pH.
Resumo:
Dairy wastewater is characterized by frequent episodes of drastic increases of organic content, giving rise to bulking filamentous bacteria and compromising the biological treatment process. This study reports the reduction of organic content of such wastewater by the application of the solar photo-Fenton process. For a wastewater containing 335, 2627 or 5400 mg C L-1 between 90% and 50% of the organic carbon content were removed after 3.5 h irradiation. The results show that the solar photo-Fenton process can be a good alternative for the abatement of organic content of dairy wastewater, especially in cases of organic content fluctuation, allowing an efficient biological treatment.
Resumo:
La Direcció General d’Indústria té com a principal finalitat el control de les instal•lacions i de diferents activitats de l’àmbit industrial; exerceix aquesta funció mitjançant la tramitació de documentacions tècniques i la inspecció. Com tota Administració Pública, es troba en un entorn molt dinàmic, on només les empreses més competitives poden subsistir i els ciutadans tenen noves necessitats molt diferents de les de fa un temps. Ambdós, empreses i ciutadans, exigeixen serveis de qualitat a un sector públic que no té altra alternativa que caminar en la mateixa direcció. L’objectiu d’aquest treball és planificar una sèrie d’accions estratègiques que permetran la millora dels serveis oferts a fi de complir amb les expectatives de la ciutadania. S’ha realitzat una anàlisi interna i de l’entorn de l’organització, el resultat de la qual ha estat la detecció d’una sèrie de punts de millora. A continuació s’ha definit una pla operatiu de qualitat, emmarcat dins del segon Pla Estratègic de Qualitat del Govern de les Illes Balears, amb tres propostes d’actuació: la separació de funcions, la tramitació ràpida d’expedients i el pla de formació. Les propostes esmentades constitueixen les bases d’una nova unitat orgànica (Oficina de Tramitació Ràpida), el model organitzatiu de la qual queda definit en els diferents apartats del treball. Igualment, s’hi descriu el procés de posada en funcionament dels distints procediments que es vagin adaptant al nou sistema i la planificació dels treballs a dur a terme, que seguiran el cicle de la qualitat de Deming, és a dir, planificar, fer, verificar i actuar.
Resumo:
The study evaluated the efficiency of chemical (phosphorylation) and physical (extrusion) modifications of the starch of broken rice. Results demonstrated a reduction in the moisture content of extruded and phosphorylated broken rice and an increase in the ash content of phosphorylated broken rice. Both phosphorylation and extrusion increased cold water binding capacity, swelling power, and solubility. Extruded and phosphorylated pastes were stable under refrigeration, but only extruded paste was stable when submitted to freezing. Phosphorylated paste had the lowest viscosity and the highest stability during heating, while the extruded one gelatinized without heating, but had higher losses during heating.
Resumo:
The ornamental rock industry generates huge amounts of wastes during the process of extraction and sawing of rock blocks. The ornamental rock powder waste is a non-biodegradable material, which represents the increase in environmental problem. The waste was collected from a granitic rock sawing plant located in Santo Antônio de Pádua, Rio de Janeiro. The chemical-environmental characterization and classification of the waste were done according to ABNT standards. The results showed that the granitic rock powder waste should be classified as Class II A - "No Inert", because of its high concentrations of lead, chrome, iron and manganese.
Resumo:
This work optimized the HPLC conditions for the simultaneous determination of luteolin, apigenin, myricetin, quercetin and kaempferol in aglycone form, as well defined the best conditions for hydrolysis/extraction of these flavonoids in fruits, using the statistical central composite design and response surface analysis. A reverse phase method was developed using a gradient of methanol/water acidified with 0.3% formic acid as mobile phase and a photodiode array detector. The samples were extracted with methanol/water (50:50 v/v) at 90 ºC. The optimum time and HCl concentration varied for the different fruits investigated, demonstrating the necessity of optimizing these conditions for each fruit analyzed. Good recovery (87.1 to 96.3%), repeatability and linearity were obtained.
Resumo:
Fruits juices are natural sources of several compounds that present antioxidant action. Together with the fruits, they contribute with almost 40% of the antioxidant capacity in a healthy diet avoiding and preventing diseases deriving from oxidative stress. The present study determined the antioxidant capacity of seven samples of industrialized fruits juices applying CRAC (Ceric Reducing/Antioxidant Capacity) assay, a new electrochemistry assay that evaluates, by means of chronoamperometric measurements, the ability of a sample in reducing species Ce4+ in acid media. At the end of the assay was obtained the following classification: cashew > guava > grape > mango > apple > orange > passion fruit.
Resumo:
This article presents a bibliographic review of research carried out on different alternative processes for biodiesel production. The supercritical and subcritical (non catalytic) reaction conditions, the use of solid basic, solid acid and other heterogeneous catalysts, including the use of immobilized enzymes and whole-cell catalysts are also critically compared with the traditional homogeneous alkaline or acid catalysts that are common on industrial applications. Advantages and limitations of all these processes for the transference from the laboratory to the industry are discussed. A correlation of the chemical composition with the quality parameters of the produced biodiesel is done with aim to stablish adequate procedures for the right selection of the raw-material. Castor bean oil is used as an example of inappropriate oil in order to produce a B100 that fulfill all the international physico-chemical quality standards. In this article are presented research results to adequate the values of viscosity, density and iodine number of the castor and soybean biodiesel to the international standard limits by means blending these both biodiesels at the right ratio.
Resumo:
Contextualized overview of the Biodiesel Production Chain, from the lab bench to the industry, with critical evaluation of state-of-art and technological development through scientific articles and patents, focusing on feedstock, reaction/production, first and second generation processes, specification and quality, transport, storage, co-products (effluents and sub-products), and emissions. Challenges are identified and solutions are proposed based on the Brazilian feedstock, edaphoclimatic conditions, process monitoring in remote regions, state policy, and environment preservation, among others. Forecasts are made based on the technology assessment, identifying future trends and opportunities for R&D&I.
Resumo:
The present work aimed to characterize an aluminum industry by-product in natura (L.A. nat) and after phosphate and thermal pretreatments; evaluate the adsorption/desorption capacity of Cd and Pb by this L.A. nat form and after the aforementioned pretreatments, comparing them with an in natura iron mining by-product (L.F. nat). The L.A. nat presented a high pH as well as a high Na concentration and also an oxide-rich mineralogy. Pretreatment of the by-product had no significant effect upon Cd and Pd adsorption/desorption. The L.A. nat performed better than the L.F. nat as an Cd and Pb adsorbent.
Resumo:
In this work the potentiality of reductive-oxidative processes based on zero-valent iron was studied aiming the degradation of nitroaromatic compounds and the remediation of residues from the explosive industry. The reductive process was applied as a continuous treatment system, using steel-wool as zero-valent iron source. The process permitted an almost total degradation of nitrobenzene, nitrophenol, nitrotoluene, dinitrotoluene and trinitrotoluene, probably with generation of the respective amine-derivative. The yellow-water residue, containing soluble trinitrotoluene, was notably modified by the reductive process, a fact that permitted a substantial enhancement of its biodegradability. Furthermore, the subsequent photo-Fenton process allowed TOC removal of about 80%.
Resumo:
Some physicochemical parameters, vitamin C, total phenolic compounds and antioxidant activity (AA) measured by ABTS, FRAP and DPPH methods were determinated in four different varieties of ripe guava produced in Colombia. Samples were statistically similar in their titratable acidity. Soluble solids were statistically similar and higher in "Pear", "Pink Regional", and "White Regional", but lower in "Apple" guavas. Vitamin C was statistically lower in "Pear" guava. Phenolics, ABTS-, FRAP-, and DPPH-AA were statistically lower in "Apple" guava if compared in wet basis. "Pink Regional" and "White Regional" contained the highest levels in vitamin C, phenolics and antioxidant activity.