Detection of purkinje images for automatic positioning of fixation target and interferometric measurements of anterior eye chamber

In cataract surgery, the eye’s natural lens is removed because it has gone opaque and doesn’t allow clear vision any longer. To maintain the eye’s optical power, a new artificial lens must be inserted. Called Intraocular Lens (IOL), it needs to be modelled in order to have the correct refractive power to substitute the natural lens. Calculating the refractive power of this substitution lens requires precise anterior eye chamber measurements. An interferometry equipment, the AC Master from Zeiss Meditec, AG, was in use for half a year to perform these measurements. A Low Coherence Interferometry (LCI) measurement beam is aligned with the eye’s optical axis, for precise measurements of anterior eye chamber distances. The eye follows a fixation target in order to make the visual axis align with the optical axis. Performance problems occurred, however, at this step. Therefore, there was a necessity to develop a new procedure that ensures better alignment between the eye’s visual and optical axes, allowing a more user friendly and versatile procedure, and eventually automatizing the whole process. With this instrument, the alignment between the eye’s optical and visual axes is detected when Purkinje reflections I and III are overlapped, as the eye follows a fixation target. In this project, image analysis is used to detect these Purkinje reflections’ positions, eventually automatically detecting when they overlap. Automatic detection of the third Purkinje reflection of an eye following a fixation target is possible with some restrictions. Each pair of detected third Purkinje reflections is used in automatically calculating an acceptable starting position for the fixation target, required for precise measurements of anterior eye chamber distances.

Experience with the first Internet-based course at the Faculty of Medicine, University of São Paulo

PURPOSE: The Internet expands the range and flexibility of teaching options and enhances the ability to process the ever-increasing volume of medical knowledge. The aim of this study is to describe and discuss our experience with transforming a traditional medical training course into an Internet-based course. METHOD: Sixty-nine students were enrolled for a one-month course. They answered pre- and post-course questionnaires and took a multiple-choice test to evaluate the acquired knowledge. RESULTS: Students reported that the primary value for them of this Internet-based course was that they could choose the time of their class attendance (67%). The vast majority (94%) had a private computer and were used to visiting the Internet (75%) before the course. During the course, visits were mainly during the weekends (35%) and on the last week before the test (29%). Thirty-one percent reported that they could learn by reading only from the computer screen, without the necessity of printed material. Students were satisfied with this teaching method as evidenced by the 89% who reported enjoying the experience and the 88% who said they would enroll for another course via the Internet. The most positive aspect was freedom of scheduling, and the most negative was the lack of personal contact with the teacher. From the 80 multiple-choice questions, the mean of correct answers was 45.5, and of incorrect, 34.5. CONCLUSIONS: This study demonstrates that students can successfully learn with distance learning. It provides useful information for developing other Internet-based courses. The importance of this new tool for education in a large country like Brazil seems clear.

Modeling and optimization of extracellular polysaccharides production by Enterobacter A47

Polysaccharides are gaining increasing attention as potential environmental friendly and sustainable building blocks in many fields of the (bio)chemical industry. The microbial production of polysaccharides is envisioned as a promising path, since higher biomass growth rates are possible and therefore higher productivities may be achieved compared to vegetable or animal polysaccharides sources. This Ph.D. thesis focuses on the modeling and optimization of a particular microbial polysaccharide, namely the production of extracellular polysaccharides (EPS) by the bacterial strain Enterobacter A47. Enterobacter A47 was found to be a metabolically versatile organism in terms of its adaptability to complex media, notably capable of achieving high growth rates in media containing glycerol byproduct from the biodiesel industry. However, the industrial implementation of this production process is still hampered due to a largely unoptimized process. Kinetic rates from the bioreactor operation are heavily dependent on operational parameters such as temperature, pH, stirring and aeration rate. The increase of culture broth viscosity is a common feature of this culture and has a major impact on the overall performance. This fact complicates the mathematical modeling of the process, limiting the possibility to understand, control and optimize productivity. In order to tackle this difficulty, data-driven mathematical methodologies such as Artificial Neural Networks can be employed to incorporate additional process data to complement the known mathematical description of the fermentation kinetics. In this Ph.D. thesis, we have adopted such an hybrid modeling framework that enabled the incorporation of temperature, pH and viscosity effects on the fermentation kinetics in order to improve the dynamical modeling and optimization of the process. A model-based optimization method was implemented that enabled to design bioreactor optimal control strategies in the sense of EPS productivity maximization. It is also critical to understand EPS synthesis at the level of the bacterial metabolism, since the production of EPS is a tightly regulated process. Methods of pathway analysis provide a means to unravel the fundamental pathways and their controls in bioprocesses. In the present Ph.D. thesis, a novel methodology called Principal Elementary Mode Analysis (PEMA) was developed and implemented that enabled to identify which cellular fluxes are activated under different conditions of temperature and pH. It is shown that differences in these two parameters affect the chemical composition of EPS, hence they are critical for the regulation of the product synthesis. In future studies, the knowledge provided by PEMA could foster the development of metabolically meaningful control strategies that target the EPS sugar content and oder product quality parameters.

Lag-user method: Using laggards to leverage user innovation

Laggards are the last users to adopt a product. Prior literature on user-led innovation ignores laggards’ impact on innovation. In this paper, we develop the Lag-User Method, through which laggards can generate new ideas. Through six studies with 62 teams in three countries, we apply the method to different technologies and services and present our findings to executives to get managerial insights. Findings reveal that laggards who generate new ideas (lag-users) have different perceptions of user-friendly products and different unfulfilled needs. They prefer simple products. We propose that by involving lag-users in NPD, firms can improve the effectiveness of NPD.

Observations on flower visitors to Bertholletia excelsa H.B.K. and Couratari tenuicarpa A.C. Sm. (Lecythidaceae)

Bees visiting flowers of Bertholletia excelsa. (Brazil Nut tree) and Couratari tenuicarpa were collected, their behavior described and the pollen found clinging to their dorsal thorax and stored on their legs was identified. Female bees of Xylocopa frontalis(Olivier) and males of Eulaema mocsaryi (Friese) are apparently effective pollinators of Couratari in igapó near Manaus. Female bees of Euplusia seabrai Moure in litt., Epicharis umbraculata (Fabricius), Epicharis rustica (Olivier) and Eulaema nigrita(Lepeletier), as well as male bees of Eulaema cingulata(Fabricius) and Eulaema nigrita are apparently effective pollinators of adult Brazil Nut trees in the Aleixo plantation near Manaus. Only large bees capable of uncurling the floral androecium can effectively pollinate Couratari or Bertholletia.Pollen analysis indicated that all bees captured carried pollen of the host tree in question and had been foraging on flowers of plant species common in secondary growth. Secondary growth near the Aleixo plantation supports a bee guild which appeared to effectively pollinate almost every flower on the Brazil Nut tree studied. Proximity to primary forest (and to those Euglossine bee species which occur only in primary forest) therefore does not appear to be necessary for pollination of Brazil Nut trees.In the Aleixo plantation chronic low fruit set is probably due to some factor other than pollination. Since natural occurrences of Brazil Nut trees to the north and south of Manaus are associated with a higher soil fertility, low production at the Aleixo plantation may be due to deficiencies of the soil.

Arshile Gorky: An Armenian in New York

Born in Armenia, the oldest Christian country in the world but nevertheless one of the youngest reinstated republics (1991) after the collapse of the Soviet Union, Arshile Gorky flew to the United States in 1920, where he chose to reinvent himself in the struggle to become an artist. This reinvention meant the creation of a persona with, or behind, which Gorky kept alive the artistic flame inside himself. Gorky became one of the most learned voices lecturing on contemporary European modernist artists and movements of the late nineteenth and early twentieth centuries in the United States (New York) without ever visiting Europe. Moreover, he was able to survive the traumatic events he underwent during the Armenian Genocide (1915-1919) to adapt to his new country and identity, to live through the years of the Depression and, eventually, to become the protagonistof a major artistic breakthrough. This paper proposes an insight into the experience of life and frame of work of this Armenian-American artist, whose simultaneously rich, traumatic, dislocated and reenacted life and work established one of the most fertile links between his middle‑eastern origins, his dreamed of Europe and the particular transit of his American artistic creation.

Avaliação experimental de compósitos de agregados leves impregnados com PCM, para aplicação em pavimentos rodoviários

Este trabalho visa, em primeiro lugar, a caracterização experimental do comportam ento de argamassas com materiais de mudança de fase (PCM) incorporados através de agregados leves, comparativamente com argamassas de referência sem incorporação de PCM. Verifica-se que a aplicação de argamassas com PCM em camadas de desgaste de pavimentos contribui para a minimização dos potenciais efeitos negativos de gelo e degelo. Os estudos experimentais permitem concluir que o método utilizado de impregnação de PCM em materiais porosos, para posterior incorporação em argamassa ou betão, é um método simples, mas muito eficaz. Os resultados indicam ainda que os materiais compósitos com PCM incorporado, podem melhorar a inércia térmica, bem como, atrasar o tempo de eventual ocorrência de congelamento sob a camada de desgaste de um pavimento

The encore project: sustainable solutions for cementitious materials

Since concrete is the most widely utilized construction material, several solutions are currently being developed and investigated for enhancing the sustainability of cementitious materials. One of these solutions is based on producing Recycled Concrete Aggregates (RCA) from existing concrete members resulting by either industrial processes or demolitions of existing structures as a whole. Moreover, waste resulting from industrial processes other than the building construction (i.e., tire recycling, production of steel, powders resulting from other depuration processes) are also being considered as possible low-impact constituents for producing structural concrete and Fiber-Reinforced Cementitious Composites (FRCC). Furthermore, the use of natural fibers is another option for producing environmentally-friendly and cost-effective materials, depending on the local availability of raw materials. To promote the use of concretes partially composed of recycled constituents, their influence on the mechanical and durability performance of these concretes have to be deeply investigated and correlated. This was the main goal of the EnCoRe Project (www.encore-fp7.unisa.it), a EU-funded initiative, whose activities and main findings are summarized in this paper.

The human eye as human-machine interface

Eye tracking as an interface to operate a computer is under research for a while and new systems are still being developed nowadays that provide some encouragement to those bound to illnesses that incapacitates them to use any other form of interaction with a computer. Although using computer vision processing and a camera, these systems are usually based on head mount technology being considered a contact type system. This paper describes the implementation of a human-computer interface based on a fully non-contact eye tracking vision system in order to allow people with tetraplegia to interface with a computer. As an assistive technology, a graphical user interface with special features was developed including a virtual keyboard to allow user communication, fast access to pre-stored phrases and multimedia and even internet browsing. This system was developed with the focus on low cost, user friendly functionality and user independency and autonomy.

The occurrence of the Asian Clam Corbicula fluminea in the lowe amazon basin

This paper records for the first time the presence of Corbicula fluminea (Philipi, 1844) in the Brazilian Amazon Basin. This exotic bivalve was found in localities on the Amazonas, Pará and Tocantins rivers. Density and population size structure were measured in some localities. Mean density is between 6.66 and 7.3 individuals m-2. Population size structure and the dates of the first records suggest that the introductions may have occurred between 1997 and 1998. The introductions may have been mediated by ocean-going vessels visiting the ports of Manaus and Belém. The potential impact of the invasion on native freshwater bivalves is discussed along with the need for monitoring and prevention of further introductions of non-indigenous bivalves in Brazil.

Segurança contra incêndios na reabilitação sustentável de edifícios antigos

Dissertação de mestrado em Construção e Reabilitação Sustentáveis

Towards effective control of P2P traffic aggregates in network infrastructures

Nowadays, many P2P applications proliferate in the Internet. The attractiveness of many of these systems relies on the collaborative approach used to exchange large resources without the dependence and associated constraints of centralized approaches where a single server is responsible to handle all the requests from the clients. As consequence, some P2P systems are also interesting and cost-effective approaches to be adopted by content-providers and other Internet players. However, there are several coexistence problems between P2P applications and In- ternet Service Providers (ISPs) due to the unforeseeable behavior of P2P traffic aggregates in ISP infrastructures. In this context, this work proposes a collaborative P2P/ISP system able to underpin the development of novel Traffic Engi- neering (TE) mechanisms contributing for a better coexistence between P2P applications and ISPs. Using the devised system, two TE methods are described being able to estimate and control the impact of P2P traffic aggregates on the ISP network links. One of the TE methods allows that ISP administrators are able to foresee the expected impact that a given P2P swarm will have in the underlying network infrastructure. The other TE method enables the definition of ISP friendly P2P topologies, where specific network links are protected from P2P traffic. As result, the proposed system and associated mechanisms will contribute for improved ISP resource management tasks and to foster the deployment of innovative ISP-friendly systems.

Estudo da influência de nanotubos de carbono funcionalizados nas propriedades de revestimentos de poliuretano

Dissertação de mestrado em Propriedades e Tecnologias de Polímeros

Strategic planning of electricity systems: Integrating renewable energies

Tese de Doutoramento - Programa Doutoral em Engenharia Industrial e Sistemas (PDEIS)

A escolha do direito aplicável ao mérito do litígio na arbitragem comercial internacional

Dissertação de mestrado em Direito dos Contratos e da Empresa