993 resultados para Fractional-order holds
Resumo:
The currently available clinical imaging methods do not provide highly detailed information about location and severity of axonal injury or the expected recovery time of patients with traumatic brain injury [1]. High-Definition Fiber Tractography (HDFT) is a novel imaging modality that allows visualizing and quantifying, directly, the degree of axons damage, predicting functional deficits due to traumatic axonal injury and loss of cortical projections. This imaging modality is based on diffusion technology [2]. The inexistence of a phantom able to mimic properly the human brain hinders the possibility of testing, calibrating and validating these medical imaging techniques. Most research done in this area fails in key points, such as the size limit reproduced of the brain fibers and the quick and easy reproducibility of phantoms [3]. For that reason, it is necessary to develop similar structures matching the micron scale of axon tubes. Flexible textiles can play an important role since they allow producing controlled packing densities and crossing structures that match closely the human crossing patterns of the brain. To build a brain phantom, several parameters must be taken into account in what concerns to the materials selection, like hydrophobicity, density and fiber diameter, since these factors influence directly the values of fractional anisotropy. Fiber cross-section shape is other important parameter. Earlier studies showed that synthetic fibrous materials are a good choice for building a brain phantom [4]. The present work is integrated in a broader project that aims to develop a brain phantom made by fibrous materials to validate and calibrate HDFT. Due to the similarity between thousands of hollow multifilaments in a fibrous arrangement, like a yarn, and the axons, low twist polypropylene multifilament yarns were selected for this development. In this sense, extruded hollow filaments were analysed in scanning electron microscope to characterize their main dimensions and shape. In order to approximate the dimensional scale to human axons, five types of polypropylene yarns with different linear density (denier) were used, aiming to understand the effect of linear density on the filament inner and outer areas. Moreover, in order to achieve the required dimensions, the polypropylene filaments cross-section was diminished in a drawing stage of a filament extrusion line. Subsequently, tensile tests were performed to characterize the mechanical behaviour of hollow filaments and to evaluate the differences between stretched and non-stretched filaments. In general, an increase of the linear density causes the increase in the size of the filament cross section. With the increase of structure orientation of filaments, induced by stretching, breaking tenacity increases and elongation at break decreases. The production of hollow fibers, with the required characteristics, is one of the key steps to create a brain phantom that properly mimics the human brain that may be used for the validation and calibration of HDFT, an imaging approach that is expected to contribute significantly to the areas of brain related research.
Resumo:
In this study, the macro steel fiber (SF), carbon fiber (CF) and nano carbon black (NCB) as triphasic conductive materials were added into concrete, in order to improve the conductivity and ductility of concrete. The influence of NCB, SF and CF on the post crack behavior and conductivity of concrete was explored. The effect of the triphasic conductive materials on the self-diagnosing ability to the load–deflection property and crack widening of conductive concrete member subjected to bending were investigated. The relationship between the fractional change in surface impedance (FCR) and the crack opening displacement (COD) of concrete beams with conductive materials has been established. The results illustrated that there is a linear relationship between COD and FCR.
Resumo:
Correlations between the elliptic or triangular flow coefficients vm (m=2 or 3) and other flow harmonics vn (n=2 to 5) are measured using sNN−−−−√=2.76 TeV Pb+Pb collision data collected in 2010 by the ATLAS experiment at the LHC, corresponding to an integrated lumonisity of 7 μb−1. The vm-vn correlations are measured in midrapidity as a function of centrality, and, for events within the same centrality interval, as a function of event ellipticity or triangularity defined in a forward rapidity region. For events within the same centrality interval, v3 is found to be anticorrelated with v2 and this anticorrelation is consistent with similar anticorrelations between the corresponding eccentricities ϵ2 and ϵ3. On the other hand, it is observed that v4 increases strongly with v2, and v5 increases strongly with both v2 and v3. The trend and strength of the vm-vn correlations for n=4 and 5 are found to disagree with ϵm-ϵn correlations predicted by initial-geometry models. Instead, these correlations are found to be consistent with the combined effects of a linear contribution to vn and a nonlinear term that is a function of v22 or of v2v3, as predicted by hydrodynamic models. A simple two-component fit is used to separate these two contributions. The extracted linear and nonlinear contributions to v4 and v5 are found to be consistent with previously measured event-plane correlations.
Resumo:
Dissertação de mestrado em Ciências da Comunicação (área de especialização em Informação e Jornalismo)
Resumo:
Dissertação de mestrado em Ciências da Comunicação (área de especialização em Publicidade e Relações Públicas)
Resumo:
1730
Resumo:
El control de propiedades hidrodinámicas capaces de influir en la mecánica de ruptura y poración de sistemas lamelares o membranas es de fundamental interés para diferentes aplicaciones biotecnológicas. Resulta de particular interés la conexión entre los procesos microscópicos relacionados al tipo de moléculas o unidades básicas, el orden determinado en el auto-ensamblado de las mismas y la dinámica local del sistema, con las propiedades físicas que determinan el comportamiento macroscópico bajo estimulación acústica. Resultados logrados recientemente sugieren la existencia de resonancias hidrodinámicas que podrian ser utilizadas para lograr la inestabilidad del sistema a baja potencia acústica. Se realizaran estudios experimentales utilizando principalmente técnicas que combinan resonancia magnética nuclear (RMN) y la sonicación de la muestra. También se realizarán estudios teóricos y simulaciones numéricas que permitan modelar los sistemas bajo estudio. Se propone dar continuidad al desarrollo de una técnica de relaxometría magnética nuclear en la cual se estimula acústicamente a la muestra durante el proceso de relajación magnética nuclear, y continuar la implementación de técnicas de RMN con resolución espacial que permitan complementar los estudios mencionados. Se espera comprender los mecanismos físicos que determinan la estabilidad de fases lamelares, logrando un modelo verificable y consistente que permita relacionar las propiedades mecánicas e hidrodinámicas con las propiedades de orden y dinámica molecular. Asimismo, se espera lograr avances en el desarrollo de las técnicas experimentales involucradas. La importancia del proyecto radica en el enfoque del problema. A diferencia de casi la totalidad de los estudios reportados, nuestro interés se enfoca en mecanismos de interacción entre la membrana y el campo acústico que sean eficientes a baja potencia acústica, en un régimen donde los gradientes térmicos y la cavitación sean despreciables.
Resumo:
v. 3
Resumo:
Magdeburg, Univ., Fak. für Mathematik, Diss., 2009