Strain specific variation of outer membrane proteins of wild Yersinia pestis strains subjected to different growth temperatures

Three Yersinia pestis strains isolated from humans and one laboratory strain (EV76) were grown in rich media at 28§C and 37§C and their outer membrane protein composition compared by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-Page). Several proteins with molecular weights ranging from 34 kDa to 7 kDa were observed to change in relative abundance in samples grown at different temperatures. At least seven Y. pestis outer membrane proteins showed a temperature-dependent and strain-specific behaviour. Some differences between the outer membrane proteins of full-pathogenic wild isolates and the EV76 strain could aldso be detected and the relevance of this finding on the use of laboratory strains as a reference to the study of Y. pestis biological properties is discuted.

Molecular analysis of yellow fever virus 17DD vaccine strain

The Oswaldo Cruz Foundation produces most of the yellow fever (YF) vaccine prepared world wide. As part of a broader approach to determine the genetic variability in YF l7D seeds and vaccines and its relevance to viral attenuation the 17DD virus was purifed directly from chick embryo homogenates which is the source of virus used for vaccination of millions of people in Brazil and other countries for half a century. Neutralization and hemagglutination tests showed that the purified virus is similar to the original stock. Furthermore, radioimmune precipitation of 35S-methionine-labeled viral proteins using mouse hyperimmune ascitic fluid revealed identical patterns for the purified 17DD virus and the YF l7D-204 strain except for the 17DD E protein which migrated slower on SDS-PAGE. This difference is likely to be due to N-linked glycosylation. Finally, comparison by northern blot nybridization of virion RNAs of purified 17DD with two other strains of YF virus only fenome-sized molecules for all three viruses. These observations suggest that vaccine phenotype is primarily associated with the accumulation of mutations.

Relations of the job demands-control-support model of job strain with personality attributes : a cross-cultural study in Switzerland and South Africa

Among the various work stress models, one of the most popular to date is the job demands-­‐control (JDC) model developed by Karasek (1979), which postulates that work-­‐related strain will be the highest under work conditions characterized by high demands and low autonomy. The absence of social support at work will further increase negative outcomes. However, this model does not apply equally to all individuals and to all cultures. In the following studies, we assessed work characteristics, personality traits, culture-­‐driven individual attributes, and work-­‐related health outcomes, through the administration of questionnaires. The samples consist of Swiss (n = 622) and South African (n = 879) service-­‐oriented employees (from health, finance, education and commerce sectors) and aged from 18 to 65 years old. Results generally confirm the universal contribution of high psychological demands, low decision latitude and low supervisor support at work, as well as high neuroticism predict the worse health outcomes among employees in both countries. Furthermore, low neuroticism plays a moderating role between psychological demands and burnout, while high openness and high conscientiousness each play a moderating role between decision latitude and burnout in South Africa. Results also reveal that culture-­‐driven individual attributes play a role in both countries, but in a unique manner and according to the ethnic group of belonging. Given that organizations are increasingly characterized with multicultural employees as well as increasingly adverse and complex job conditions, our results help in identifying more updated and refined dynamics that are key between the employee and the work environment in today's context. -- L'un des modèles sur le stress au travail des plus répandus est celui développé par Karasek (1979), qui postule qu'une mauvaise santé chez les employés résulte d'une combinaison de demandes psychologiques élevées, d'une latitude décisionnelle faible et de l'absence de soutien social au travail. Néanmoins, ce modèle ne s'applique pas de façon équivalente chez tous les individus et dans toutes les cultures. Dans les études présentées, nous avons mesuré les caractéristiques de travail, les traits de personnalité, les traits culturels et les effets lies à la santé à l'aide de questionnaires. L'échantillon provient de la Suisse (n = 622) et de l'Afrique du Sud (n = 879) et comprend des employés de domaines divers en lien avec le service (notamment des secteurs de la santé, finance, éducation et commerce) tous âgés entre 18 et 65 ans. Les résultats confirment l'universalité des effets directs des demandes au travail, la latitude décisionnelle faible, le soutien social faible provenant du supérieur hiérarchique, ainsi que le névrosisme élevé qui contribuent à un niveau de santé faible au travail, et ce, dans les deux pays. De plus, un niveau faible de névrosisme a un effet de modération entre les demandes au travail et l'épuisement professionnel, alors que l'ouverture élevée et le caractère consciencieux élevé modèrent la relation entre la latitude décisionnelle et l'épuisement professionnel en Afrique du Sud. Nous avons aussi trouvé que les traits culturels jouent un rôle dans les deux pays, mais de façon unique et en fonction du groupe ethnique d'appartenance. Sachant que les organisations sont de plus en plus caractérisées par des employés d'origine ethnique variées, et que les conditions de travail se complexifient, nos résultats contribuent à mieux comprendre les dynamiques entre l'employé et l'environnement de travail contemporain. personnalité, différences individuelles, comparaisons culturelles, culture, stress au travail, épuisement professionnel, santé des employés.

A mixed finite element method for nonlinear diffusion equations

We propose a mixed finite element method for a class of nonlinear diffusion equations, which is based on their interpretation as gradient flows in optimal transportation metrics. We introduce an appropriate linearization of the optimal transport problem, which leads to a mixed symmetric formulation. This formulation preserves the maximum principle in case of the semi-discrete scheme as well as the fully discrete scheme for a certain class of problems. In addition solutions of the mixed formulation maintain exponential convergence in the relative entropy towards the steady state in case of a nonlinear Fokker-Planck equation with uniformly convex potential. We demonstrate the behavior of the proposed scheme with 2D simulations of the porous medium equations and blow-up questions in the Patlak-Keller-Segel model.

Nash equilibrium strategies in discrete-time finite-horizon dynamic games with risk-and effort-averse players

The objective of this paper is to re-examine the risk-and effort attitude in the context of strategic dynamic interactions stated as a discrete-time finite-horizon Nash game. The analysis is based on the assumption that players are endogenously risk-and effort-averse. Each player is characterized by distinct risk-and effort-aversion types that are unknown to his opponent. The goal of the game is the optimal risk-and effort-sharing between the players. It generally depends on the individual strategies adopted and, implicitly, on the the players' types or characteristics.

Radioimmunotherapy consolidation and rituximab maintenance in the initial treatment of follicular lymphoma.

ABSTRACT: Several reports have documented similar efficacies and tolerable toxicities of radioimmunotherapy (RIT) consolidation and rituximab maintenance after initial R-chemotherapy of follicular lymphoma. The relative merits of these two interventions are currently under discussion. We now raise the question whether both RIT consolidation and rituximab maintenance should be used together aiming to augment the results achievable with R-chemotherapy.

Difference in susceptibility to lysis between clones of the Y strain of Trypanosoma cruzi

Three clones isolated from the Y strain of Trypanosoma cruzi - YP1, YP2 and YP3 - were adapted to in vitro cultivation in VERO cells. The recovery of the parasites from the Y strain and clone YP3 was similar after 24 hr of contact with cells (3.2% and 2.7%, respectively) and much lower than the recovery of clones YP1 and YP2 (56.7% and 60.0% of inoculum, respectively). After five days incubation, the ratio Trypomastigotes/Amastigotes released into the supernatants was about 90/10 for clone YP1, YP3 and Y strain, and 50/50 for clone YP2. After nine days, the ratio was 62/38 for clone YP1, 97/3 for clone YP3, 81/19 for Y strain and 50/50 for clone YP2. The susceptibility of tissue culture derived trypomastigotes (TCT) to lysis in the presence of chronic chagasic human sera and human complement was assessed using Complement Mediated Lysis reaction (CML). Trypomastigotes from clone YP2 were consistently less susceptible to CML (% lysis less than 20), than parasites from the other clones and Y strain. Parasites of clone YP3 had susceptibility to CML comparable to that of the Y strain (about 70%), while TCT of clone YP1 had intermediary susceptibility (40%).

Behavior study of pipes after forming, coating and bending

A study of the main types of coatings and its processes that modern industry commonly apply to prevent to the corrosion due to the environmental effects to energetic market pipelines have been done. Extracting main time and temperature range values, coating heat treatment recreation have been applied to x65 pipelines steel grade samples obtained from a pipe which was formed using UOE forming process. Experimental tensile tests and Charpy V‐Notch Impact test have been carried out for a deeply knowledge of the influence on the steel once this recreations are applied. The Yield Strength and toughness have been improved despite lower values in rupture strain and ductile‐brittle temperature transition have been obtained. Finite Element Method have been applied to simulate the entirely pipe cold bending process to predict the mechanical properties and behaviour of the pipe made from x65 steel grade under different conditions.