Detection of pathogens from periodontal lesions

OBJECTIVE: To comparatively detect A. actinomycetemcomitans and F. nucleatum from periodontal and healthy sites. METHODS: Subgingival clinical samples from 50 periodontitis adult patients and 50 healthy subjects were analyzed. Both organisms were isolated using a trypticase soy agar-bacitracin-vancomycin (TSBV) medium and detected by PCR. Conventional biochemical tests were used for bacteria identification. RESULTS: A. actinomycetemcomitans and F. nucleatum were isolated in 18% and 20% of the patients, respectively, and in 2% and 24% of healthy subjects. Among A. actinomycetemcomitans isolates, biotype II was the most prevalent. Primer pair AA was 100% sensitive in the detection of A. actinomycetemcomitans from both subject groups. Primers ASH and FU were also 100% sensitive to detect this organism in healthy subject samples. Primer pair FN5047 was more sensitive to detect F. nucleatum in patients or in healthy samples than primer 5059S. Primers ASH and 5059S were more specific in the detection of A. actinomycetemcomitans and F. nucleatum, respectively, in patients and in healthy subject samples. CONCLUSIONS: PCR is an effective tool for detecting periodontal pathogens in subgingival samples, providing a faster and safer diagnostic tool of periodontal diseases. The method's sensitivity and specificity is conditioned by the choice of the set of primers used.

Extraction of ochratoxin A in bread samples by the QuEChERS methodology

A QuEChERS method for the extraction of ochratoxin A (OTA) from bread samples was evaluated. A factorial design (23) was used to find the optimal QuEChERS parameters (extraction time, extraction solvent volume and sample mass). Extracts were analysed by LC with fluorescence detection. The optimal extraction conditions were: 5 g of sample, 15 mL of acetonitrile and 3 min of agitation. The extraction procedure was validated by systematic recovery experiments at three levels. The recoveries obtained ranged from 94.8% (at 1.0 μg kg -1) to 96.6% (at 3.0 μg kg -1). The limit of quantification of the method was 0.05 μg kg -1. The optimised procedure was applied to 20 samples of different bread types (‘‘Carcaça’’, ‘‘Broa de Milho’’, and ‘‘Broa de Avintes’’) highly consumed in Portugal. None of the samples exceeded the established European legal limit of 3 μg kg -1.

Technical and economic assessment of energy from Tidal Currents

The present work aims to study the feasibility of deploying a farm of sea current turbines for electricity generation in Portugal. An approach to the tides, which are they, how they are formed, its prediction, is held. It is also conducted a study about the energy of sea currents and it is presented some technology about ocean currents too. A model of tidal height and velocity of the currents it is also developed. The energy produced by a hypothetical park, built in Sines (Portugal), is calculated and afterwards, an economical assessment is performed for two possible scenarios and a sensitivity analysis of NVP (Net Present Value) and LCOE (Levelized Cost of Energy) is figured. The conclusions about the feasibility of the projects are also presented. Despite being desired due to its predictability, this energy source is not yet economically viable as it is in an initial state of development. To push investment in this technology a feed-in tariff of, at least €200/MWh, should be considered.

Technical and economic assessment of energy from Tidal Currents

The present work aims to study the feasibility of deploying a farm of sea current turbines for electricity generation in Portugal. An approach to the tides, which are they, how they are formed, its prediction, is held. It is also conducted a study about the energy of sea currents and it is presented some technology about ocean currents too. A model of tidal height and velocity of the currents it is also developed. The energy produced by a hypothetical park, built in Sines (Portugal), is calculated and afterwards, an economical assessment is performed for two possible scenarios and a sensitivity analysis of NVP (Net Present Value) and LCOE (Levelized Cost of Energy) is figured. The conclusions about the feasibility of the projects are also presented. Despite being desired due to its predictability, this energy source is not yet economically viable as it is in an initial state of development. To push investment in this technology a feed-in tariff of, at least €200/MWh, should be considered.

Serological and infection statuses of dogs from a visceral leishmaniasis-endemic area

OBJECTIVE This study investigated the serological status of dogs living in a visceral leishmaniasis-endemic area and its correlation with the parasitological condition of the animals.METHODS Canine humoral response was evaluated using the sera of 134 dogs by enzyme-linked immunosorbent assay and immunohistochemistry to detect parasites in the skin, lymph node, and spleen of the animals. The specific antibodies investigated were IgG, IgG1, IgG2, and IgE.RESULTS According to the parasitological, laboratory, and clinical findings, the dogs were placed into one of four groups: asymptomatic with (AP+, n = 21) or without (AP-, n = 36) Leishmania tissue parasitism and symptomatic with (SP+, n = 52) or without (SP-, n = 25) parasitism. Higher IgG and IgE levels were positively correlated with the infection condition and parasite load, but not with the clinical status. In all groups, total IgG was the predominant antibody, which occurred at the expense of IgG2 instead of IgG1. Most of the infected dogs tested positive for IgG (SP+, 98.1%; AP+, 95.2%), whereas this was not observed with IgE (SP+, 80.8%; AP+, 71.2%). The most relevant finding was the high positivity of the uninfected dogs for Leishmania-specific IgG (SP-, 60.0%; AP-, 44.4%), IgE (SP-, 44.0%; AP-, 27.8%), IgG1 (SP-, 28.0%; AP-, 22.2%), and IgG2 antibodies (SP-, 56.0%; AP-, 41.7%).CONCLUSIONS The serological status of dogs, as determined by any class or subclass of antibodies, did not accurately distinguish dogs infected with L. (L.) infantum chagasifrom uninfected animals. The inaccuracy of the serological result may impair not only the diagnosis, but also epidemiological investigations and strategies for visceral leishmaniasis control. This complex serological scenario occurring in a visceral leishmaniasis-endemic area highlights the challenges associated with canine diagnosis and points out the difficulties experienced by veterinary clinicians and coordinators of control programs.

Production, purification and characterization of laccase from pleurottus ostreatus grown on tomato pomace

A strain of Pleurotus ostreatus was grown in tomato pomace as sole carbon source for production of laccase. The culture of P. ostreatus revealed a peak of laccase activity (147 U/L of fermentation broth) on the 4th day of culture with a specific activity of 2.8 U/mg protein. Differential chromatographic behaviour of laccase was investigated on affinity chromatographic matrices containing either urea, acetamide, ethanolamine or IDA as affinity ligands. Laccase exhibited retention on such affinity matrices and it was purified on a Sepharose 6B-BDGE-urea column with final enzyme recoveries of about 60%, specific activity of 6.0 and 18.0 U/mg protein and purification factors in the range of 14-46. It was also possible to demonstrate that metal-free laccase did not adsorb to Sepharose 6B-BDGE-urea column which suggests that adsorption of native laccase on this affinity matrix was apparently due to the specific interaction of carbonyl groups available on the matrix with the active site Cu (II) ions of laccase. The kinetic parameters (V (max), K (m) , K (cat), and K (cat)/K (m) ) of the purified enzyme for several substrates were determined as well as laccase stability and optimum pH and temperature of enzyme activity. This is the first report describing the production of laccase from P. ostreatus grown on tomato pomace and purification of this enzyme based on affinity matrix containing urea as affinity ligand.

Visual programming of XSLT from examples

Vishnu is a tool for XSLT visual programming in Eclipse - a popular and extensible integrated development environment. Rather than writing the XSLT transformations, the programmer loads or edits two document instances, a source document and its corresponding target document, and pairs texts between then by drawing lines over the documents. This form of XSLT programming is intended for simple transformations between related document types, such as HTML formatting or conversion among similar formats. Complex XSLT programs involving, for instance, recursive templates or second order transformations are out of the scope of Vishnu. We present the architecture of Vishnu composed by a graphical editor and a programming engine. The editor is an Eclipse plug-in where the programmer loads and edits document examples and pairs their content using graphical primitives. The programming engine receives the data collected by the editor and produces an XSLT program. The design of the engine and the process of creation of an XSLT program from examples are also detailed. It starts with the generation of an initial transformation that maps source document to the target document. This transformation is fed to a rewrite process where each step produces a refined version of the transformation. Finally, the transformation is simplified before being presented to the programmer for further editing.

Elution of proteins from polyacrylamide eels: a simple and economic procedure

A simplified methodology for the quantitative electroelution of proteins from polyacrylamide gels is described. After staining with Coomassie Brilliant Blue R 250, the identified bands are excised from the gel and the proteins eluted using a procedure developed for use in conventional tube gel electrophoresis equipment.

Potential infectivity of blood from HBsAG asymptomatic carriers due to the presence of HBV-DNA and comparison with other markers of hbv infection

Serum samples from 356 HBsAg positive asymptomatic carriers, which were titrated by reverse passive hemagglutination, were analysed for the presence of HBV-DNA, HBsAg and IgM anti-HBc. The samples were divided in three classes, according to the titers of HBsAg and IgM anti-HBc and the distribution of HBV-DNA and HBsAg among these classes was studied. In the high titer class of HBsAg, 65% of samples have one or both markers against only 19% in the low titer class. From the total of 356 samples, 121 gave positive results for IgM anti-HBc (33.9%). From these, 38.9% of HBV-DNA and 47.9% of HBeAg were observed, whereas in samples with absence of IgM anti-HBc, 18.3% and 16.6% were respectively found. A higher frequency of agreement between all these markers was found in the class of high titers of HBsAg; however, HBV-DNA was detected in the low titer class of HBsAg and little or no IgM anti-HBc, showing potential blood infectivity even in HBsAg positive borderline samples.

Immunomodulatory effect of cimetidine on the proliferative responses of splenocytes from T. cruzi-infected rats

The immunomodulatory effect of cimetidine (CIM), a histamine type-2 receptor antagonist, was evaluated in respect to the blastogenic response to Con A of Wistar Furth (WF) rats infected by the Y strain of Trypanosoma cruzi (T. cruzi). Enhancement of blastogenesis of normal splenocytes was observed at a concentration of 10-3M. However, the splenocytes from infected animals responded to concentrations of CIM ranging from 10-8 to 10-3M. The mitogenic response to Con A of cells from infected animals was restored in the presence of CIM. The results show that CIM modulates the "in vitro" proliferative response of cells from T. cruzi-infected rats and suggest an immunoregulatory role of histamine and/or of cells that express H2 receptors in this infection.

Natural and experimental infection of planorbids from the Island of Santa Catarina (Brazil)

Studies on eight localities on the Island of Santa Catarina revealed the presence of three species of the molluscan family Planorbidae: Biomphalaria tenagophila, Drepanotrema cimex and Biomphalaria oligoza, the first one being naturally infected by Cercaria ocellifera, a furcocercaria with morphological characteristics of Cercaria caratinguensis, and by an unknown furcocercaria. Drepanotrema cimex was infected by a furcocercaria with characteristics of C. caratinguensis and by C. macrogranulosa. No natural infection was found in B. oligoza. B. tenagophila showed no susceptibility to the experimental infection by the BH-MG strain of Schistosoma mansoni from Belo Horizonte and maintained at laboratory in B. glabrata snails.

Immunodiagnosis of hydatid disease: evaluation of antigens from hydatid cyst fluid and the vesicularfluid of Taenia crassiceps metacestode

The specificity and sensitivity of the enzyme immunoassay (EIA), presently used in South America areas where hydatidosis caused by Echinococcus granulosus is endemic, was compared to two alternative EIA. One of these uses an hydatid antigen of different prepraration and the other vesicular fluid of Taenia crassiceps cisticerci (VFCC). The effect of previous neutralization in the serum sample of antibodies anti-normal ovine or murine sera and anti-phosphorylcholine on the diagnostic efficiency of these EIA was studied. The frequency of distribution of the titers obtained with normal sera, hydatid sera positive to DD5 test and hydatid sera negative to DD5 test in three EIA systems was analyzed. Results showed a significant decrease of sensitivity of the EIA using VFCC when compared to these EIA using hydatid antigens. This makes inconvenient the use of VFCC for the immunodiagnosis of hydatid disease. No significant differences between the two EIA using hydatid antigens were observed. SDS-PAGE analysis showed remarkable differences between the VFCC and the hydatid antigens composition and some differences among these latters probably due to manufacturing procedures.

Synthesis of biodiesel from wastes of food industry via direct transesterification with methanol/carbon dioxide mixtures

Dissertation presented at Faculdade de Ciências e Tecnologia from Universidade Nova de Lisboa to obtain the degree of Master in Chemical and Biochemical Engineering