Operational and environmental assessment on the use of charcoal in iron ore sinter production

A study was carried out into the use of charcoal as a supplementary fuel in the iron-ore sintering process. The primary fuel was coke breeze and anthracite with 0, 10, 25, 50 and 100% replacement of the energy input with charcoal to produce sinter. This was achieved by considering the carbon content of each fuel and its corresponding participation on fuel blending, in order to have the same carbon input in each test run. An extensive analysis of the environmental impact was carried out regarding the atmospheric pollutants characterization (dust, sulphur dioxide, nitrogen oxides, carbon monoxide, carbon dioxide, methane, total hydrocarbons, and dioxins and furans). Experimental results indicate that fuel blending where 50% of the heat input was provided by charcoal may be comparable with those using 100% coke, under normal sintering conditions, and may result in a 50% reduction on greenhouse gas emission. It was also observed that while dust, methane and hydrocarbons emissions increased, the total dioxins and furans, expressed as polychlorinated dibenzodioxins/furans, decreased approximately 50% when compared with operation with 100% coke.

The role of collective action in the provision of agri-environmental public goods: theoretical development through case studies in Italy

The thesis aims at analysing the role of collective action as a viable alternative to the traditional forms of intervention in agriculture in order to encourage the provision of agri-environmental public goods. Which are the main benefits of collective action, in terms of effectiveness and efficiency, compared to traditional market or public intervention policies? What are the drivers that encourage farmers to participate into collective action? To what extent it is possible to incorporate collective aspects into policies aimed at providing agri-environmental public goods? With the objective of addressing these research questions, the thesis is articulated in two levels: a theoretical analysis on the role of collective action in the provision of public goods and a specific investigation of two local initiative,s were an approach collective management of agro-environmental resources was successfully implemented. The first case study concerns a project named “Custodians of the Territory”, developed by the local agency in Tuscany “Comunità Montana Media Valle del Serchio”, which settled for an agreement with local farmers for a collective provision of environmental services related to the hydro-geological management of the district. The second case study is related to the territorial agri-environmental agreement experimented in Valdaso (Marche), where local farmers have adopted integrated pest management practices collectively with the aim of reducing the environmental impact of their farming practices. The analysis of these initiatives, carried out through participatory methods (Rapid Rural Appraisal), allowed developing a theoretical discussion on the role of innovative tools (such as co-production and co-management) in the provision of agri-environmental public goods. The case studies also provided some recommendations on the government intervention and policies needed to promote successful collective action for the provision of agri-environmental public goods.

Environmental Assessment of the Agricultural Sector

One of the main problems recognized in sustainable development goals and sustainable agricultural objectives is Climate change. Farming contributes significantly to the overall Greenhouse gases (GHG) in the atmosphere, which is approximately 10-12 percent of total GHG emissions, but when taking in consideration also land-use change, including deforestation driven by agricultural expansion for food, fiber and fuel the number rises to approximately 30 percent (Smith et. al., 2007). There are two distinct methodological approaches for environmental impact assessment; Life Cycle Assessment (a bottom up approach) and Input-Output Analysis (a top down approach). The two methodologies differ significantly but there is not an immediate choice between them if the scope of the study is on a sectorial level. Instead, as an alternative, hybrid approaches which combine these two approaches have emerged. The aim of this study is to analyze in a greater detail the agricultural sectors contribution to Climate change caused by the consumption of food products. Hence, to identify the food products that have the greatest impact through their life cycle, identifying their hotspots and evaluating the mitigation possibilities for the same. At the same time evaluating methodological possibilities and models to be applied for this purpose both on a EU level and on a country level (Italy).

Psychosocial and environmental predictors of calcium intake, physical activity and bone health among adolescent girls

Objectives. The purpose of this study was to identify the psychosocial and environmental predictors and the pathways they use to influence calcium intake, physical activity and bone health among adolescent girls. Methods. A secondary data analysis using a cross-sectional and longitudinal study design was implemented to examine the associations of interest. Data from the Incorporating More Physical Activity and Calcium in Teens (IMPACT) study collected in 2001-2003 were utilized for the analyses. IMPACT was a 1½ year nutrition and physical activity intervention study conducted among 718 middle-school girls in central Texas. Hierarchical regression modeling and Structural Equation Modeling (SEM) were used to determine the psychosocial predictors of calcium intake, physical activity and bone health at baseline. Hierarchical regression was used to determine if psychosocial factors at baseline were significant predictors of calcium intake and physical activity at follow-up. Data was adjusted for included BMI, lactose intolerance, ethnicity, menarchal status, intervention and participation in 7th grade PE/athletics. Results. Results of the baseline regression analysis revealed that calcium self-efficacy and milk availability at home were the strongest predictors of calcium intake. Friend engagement in physical activity, physical activity self-efficacy and participation in sports teams were the strongest predictors of physical activity. Finally, physical activity outcome expectations, social support and participation in sports teams were significant predictors of stiffness index at baseline. Results of the baseline SEM path analysis found that outcome expectations and milk availability at home directly influenced calcium intake. Knowledge and calcium self-efficacy indirectly influenced calcium intake with outcome expectations as the mediator. Physical activity self-efficacy and social support had significant direct and indirect influence on physical activity with participation in sports teams as the mediator. Participation in sports teams had a direct effect on both physical activity and stiffness index. Results of regression analysis for baseline predicting follow-up showed that participation in sports teams, self-efficacy, outcome expectations and social support at baseline were significant predictors of physical activity at follow-up. Conclusion. Results of this study reinforce the relevance of addressing both, psychosocial and environmental factors which are critical when developing interventions to improve bone health among adolescent girls. ^

A STUDY OF DIVERSITY AND COMMUNITY COMPARISON INDICES BY BIOASSAY OF COPPER USING COLONIZED BENTHIC MACROINVERTEBRATES

A community bioassay of copper was performed using benthic macroinvertebrates colonized on multiplate substrate samplers. Five copper concentrations ranging from 0.080-2.20 mg/l total copper were administered to five artificial streams by a Mount and Brungs proportional dilutor. Free copper ion as Cu('++) ranged from .002-.053 mg/l. A sixth stream received no copper and served as a control. Substrates were sampled at days 0, 14, and 28, and the results were used to compare 13 indices used or proposed to assess aquatic environmental impact. Sensitivity of the indices to changes in communities with respect to concentration and time was the basis for the comparison.^ Results indicated that all of the 8 diversity or richness indices tested gave approximately the same result (with the exception of number of species); they increased over the first 2-3 concentrations, then declined. Included among these was the Shannon index which gave false positive results, i.e., it increased, indicating enrichment, when in fact perturbation had occurred. This result was due to the disproportionate effect on the most abundant taxa, which caused a more even distribution of individuals among species. Number of species and individuals declined with increased concentration and time, with only one exception in the case of species, indicating perturbation.^ Results of five community comparison indices were varied at day 14 but by day 28 the results indicated a clear, nearly monotonic, trend due to copper impact. It was assumed that day 28 observations, though probably still changing, were nearer stability than at day 14 and therefore more representative of natural conditions. The changes in community comparison indices showed good agreement at 28 days and reflected the general decline in species and individuals. No single community comparison index could be set apart as superior to the others. ^

Simultaneous environmental and economic process synthesis of Isobutane Alkylation

This multidisciplinary study concerns the optimal design of processes with a view to both maximizing profit and minimizing environmental impacts. This can be achieved by a combination of traditional chemical process design methods, measurements of environmental impacts and advanced mathematical optimization techniques. More to the point, this paper presents a hybrid simulation-multiobjective optimization approach that at once optimizes the production cost and minimizes the associated environmental impacts of isobutane alkylation. This approach has also made it possible to obtain the flowsheet configurations and process variables that are needed to manufacture isooctane in a way that satisfies the above-stated double aim. The problem is formulated as a Generalized Disjunctive Programming problem and solved using state-of-the-art logic-based algorithms. It is shown, starting from existing alternatives for the process, that it is possible to systematically generate a superstructure that includes alternatives not previously considered. The optimal solution, in the form a Pareto curve, includes different structural alternatives from which the most suitable design can be selected. To evaluate the environmental impact, Life Cycle Assessment based on two different indicators is employed: Ecoindicator 99 and Global Warming Potential.

Potential impact of Wild boar (Sus scrofa) on Pheasant (Phasianus colchicus) nesting success

In recent decades wild boar have greatly increased in Europe due a combination of environmental and human factors. Because of a high reproduction rate, wild boar cause conflicts with human activities and in particularly agriculture. However, there are concerns also about environmental impact and in particular on ground nesting birds. Our study aim to evaluate the potential impact of wild boar on pheasants nests. Predation rates were compared between two areas with different wild boar abundance and between nests placed in fenced plots with no wild boar access (but accessible to other predators) and open plots in which the wild boar gains access. Predation rate by wild boar in the area with higher wild boar abundance was 61.5% whereas in the area with lower abundance was 16.0%. In plots with free access, wild boar predation was 34.2% whereas in exclusion plots we did not registered predation by wild boar. Moreover, wild boar resulted the main nest predator (total loss 22.8%). Our findings suggest that wild boar could have e strong impact on pheasant reproductive success.

New Mexico statewide wilderness study.

"BLM-NM-ES-85-002-4332"--P. [2] of cover.

TASSIM: a transportation and air shed simulation model. Volume 1, case study of the Boston region. Final report.

Transportation Department, Secretary of Transportation, Washington, D.C.

Study design for a method of projecting vehicle miles travel. Final report.

Transportation Systems Center, Cambridge, Mass.

Environmental benefits assessment in economic impact studies : a review /

Project no.80.144.

Conceptual Frameworks for SIA Revisited: a cumulative effects study on lead contamination and economic change

This article trials three conceptual frameworks on an Australian case study of a small remote city suffering lead contamination, with cumulative effects from concurrent economic change due to downsizing in the mining industry. It interprets the usefulness of these frameworks, and explores two questions: can they apply to circumstances other than project assessment, and what are their relative merits as guides to SIA? All the frameworks reviewed can be used in non-project and cumulative SIA, although, if they had been used to predict the impacts in our case study, we may easily have been misled as to the resilience of the community. Choosing among these frameworks becomes a matter personal preference: each has different merits.

Risk-based maintenance model for offshore oil and gas pipelines:a case study

Offshore oil and gas pipelines are vulnerable to environment as any leak and burst in pipelines cause oil/gas spill resulting in huge negative Impacts on marine lives. Breakdown maintenance of these pipelines is also cost-intensive and time-consuming resulting in huge tangible and intangible loss to the pipeline operators. Pipelines health monitoring and integrity analysis have been researched a lot for successful pipeline operations and risk-based maintenance model is one of the outcomes of those researches. This study develops a risk-based maintenance model using a combined multiple-criteria decision-making and weight method for offshore oil and gas pipelines in Thailand with the active participation of experienced executives. The model's effectiveness has been demonstrated through real life application on oil and gas pipelines in the Gulf of Thailand. Practical implications. Risk-based inspection and maintenance methodology is particularly important for oil pipelines system, as any failure in the system will not only affect productivity negatively but also has tremendous negative environmental impact. The proposed model helps the pipelines operators to analyze the health of pipelines dynamically, to select specific inspection and maintenance method for specific section in line with its probability and severity of failure.

The impact on agriculture of the drawdown of shallow watertables

The promoters of the large groundwater developments implemented in the 1970's paid little attention to the effects of pumping on soil moisture. A field study, conducted in 1979 in the Tern Area of the Shropshire Groundwater Scheme, revealed that significant quantities of the available moisture could be removed from the root zone of vegetation when drawdown of shallow watertables occurred. Arguments to this effect, supported by the field study evidence, were successfully presented at the Shropshire Groundwater Scheme public inquiry. The aim of this study has been to expand the work which was undertaken in connection with the Shropshire Groundwater Scheme, and to develop a method whereby the effects of groundwater pumping on vegetation can be assessed, and hence the impacts minimised. Two concepts, the critical height and the soil sensitivity depth, formulated during the initial work are at the core of the Environmental Impact Assessment method whose development is described. A programme of laboratory experiments on soil columns is described, as is the derivation of relationships for determining critical heights and field capacity moisture profiles. These relationships are subsequently employed in evaluating the effects of groundwater drawdown. In employing the environmental assessment technique, digitised maps of relevant features of the Tern Area are combined to produce composite maps delineating the extent of the areas which are potentially sensitive to groundwater drawdown. A series of crop yield/moisture loss functions are then employed to estimate the impact of simulated pumping events on the agricultural community of the Tern Area. Finally, guidelines, based on experience gained through evaluation of the Tern Area case study, are presented for use in the design of soil moisture monitoring systems and in the siting of boreholes. In addition recommendations are made for development of the EIA technique, and further research needs are identified.