Assessment of Environmental Impacts of Power Generation

Through indisputable evidence of climate change and its link to the greenhouse gas emissions comes the necessity for change in energy production infrastructure during the coming decades. Through political conventions and restrictions energy industry is pushed toward using bigger share of renewable energy sources as energy supply. In addition to climate change, sustainable energy supply is another major issue for future development plans, but neither of these should come with unbearable price. All the power production types have environmental effects as well as strengths and weaknesses. Although each change comes with a price, right track in minimising the environmental impacts and energy supply security can be found by combining all possible low-carbon technologies and by improving energy efficiency in all sectors, for creating a new power production infrastructure of tolerable energy price and of minor environmental effects. GEMIS-Global Emission Model for Integrated Systems is a life-cycle analysis program which was used in this thesis to make indicative energy models for Finland’s future energy supply. Results indicate that the energy supply must comprise both high capacity nuclear power as well as large variation of renewable energy sources for minimization of all environmental effects and keeping energy price reasonable.

Terpenos com atividade inseticida: uma alternativa para o controle químico de insetos

Many substances from different sources have been used by men for decades to control insects. After the 2nd World War, the use of inorganic compounds have declined drastically and natural products, as well as synthetic derivatives, have been widely used instead. The search for natural alternatives have improved the development of bench top bioassays and an array of synthetic approaches for known and novel natural products that shows relevant activities as feeding supressors and deterrents. The studies concerning mode of action and environmental impact of these substances, that may be biodegradable and selective for undesired insects, had led to the evaluation and discovery of a number of molecules, mostly terpenoids and alkaloids, that are well reported as candidates for inseticidal compounds that could be an effective alternative for insects control with a lower impact on human health, household animals and the environment.

Rheological behavior of Chlorella sp. e Scenedesmus sp. cultures in different biomass concentrations

Studies involving the use of microalgae are increasingly intensifying for the potential they present to produce biofuels, because they are a renewable energy source that does not compete directly with food production, and because they enable the obtaining of a fuel with less environmental impact when compared to fossil fuel. In this context, the use of microalgae is directly associated to its capacity to be produced on a large scale and to be extracted from the culture medium. Rheological studies are important for obtaining the information needed in the elaboration of projects and equipment that will be used in various operations existing in systems of production and extraction of algal biomass. In the evaluation of different levels of dry biomass concentration, studies have been conducted of the rheological behavior of cultures of Chlorella sp. BR001 and Scenedesmus sp. BR003. The Power Law model adjusted well to the data of shear stress as a function of strain rate. In all concentrations the cultures showed non-Newtonian behavior. It was observed to Scenedesmus sp. BR003 little effect of biomass concentration on the apparent viscosity and shear stress.

Production of Mg(OH)2 from Mg-silicate rock for CO2 mineral sequestration

Sequestration of carbon dioxide in mineral rocks, also known as CO2 Capture and Mineralization (CCM), is considered to have a huge potential in stabilizing anthropogenic CO2 emissions. One of the CCM routes is the ex situ indirect gas/sold carbonation of reactive materials, such as Mg(OH)2, produced from abundantly available Mg-silicate rocks. The gas/solid carbonation method is intensively researched at Åbo Akademi University (ÅAU ), Finland because it is energetically attractive and utilizes the exothermic chemistry of Mg(OH)2 carbonation. In this thesis, a method for producing Mg(OH)2 from Mg-silicate rocks for CCM was investigated, and the process efficiency, energy and environmental impact assessed. The Mg(OH)2 process studied here was first proposed in 2008 in a Master’s Thesis by the author. At that time the process was applied to only one Mg-silicate rock (Finnish serpentinite from the Hitura nickel mine site of Finn Nickel) and the optimum process conversions, energy and environmental performance were not known. Producing Mg(OH)2 from Mg-silicate rocks involves a two-staged process of Mg extraction and Mg(OH)2 precipitation. The first stage extracts Mg and other cations by reacting pulverized serpentinite or olivine rocks with ammonium sulfate (AS) salt at 400 - 550 oC (preferably < 450 oC). In the second stage, ammonia solution reacts with the cations (extracted from the first stage after they are leached in water) to form mainly FeOOH, high purity Mg(OH)2 and aqueous (dissolved) AS. The Mg(OH)2 process described here is closed loop in nature; gaseous ammonia and water vapour are produced from the extraction stage, recovered and used as reagent for the precipitation stage. The AS reagent is thereafter recovered after the precipitation stage. The Mg extraction stage, being the conversion-determining and the most energy-intensive step of the entire CCM process chain, received a prominent attention in this study. The extraction behavior and reactivity of different rocks types (serpentinite and olivine rocks) from different locations worldwide (Australia, Finland, Lithuania, Norway and Portugal) was tested. Also, parametric evaluation was carried out to determine the optimal reaction temperature, time and chemical reagent (AS). Effects of reactor types and configuration, mixing and scale-up possibilities were also studied. The Mg(OH)2 produced can be used to convert CO2 to thermodynamically stable and environmentally benign magnesium carbonate. Therefore, the process energy and life cycle environmental performance of the ÅAU CCM technique that first produces Mg(OH)2 and the carbonates in a pressurized fluidized bed (FB) were assessed. The life cycle energy and environmental assessment approach applied in this thesis is motivated by the fact that the CCM technology should in itself offer a solution to what is both an energy and environmental problem. Results obtained in this study show that different Mg-silicate rocks react differently; olivine rocks being far less reactive than serpentinite rocks. In summary, the reactivity of Mg-silicate rocks is a function of both the chemical and physical properties of rocks. Reaction temperature and time remain important parameters to consider in process design and operation. Heat transfer properties of the reactor determine the temperature at which maximum Mg extraction is obtained. Also, an increase in reaction temperature leads to an increase in the extent of extraction, reaching a maximum yield at different temperatures depending on the reaction time. Process energy requirement for producing Mg(OH)2 from a hypothetical case of an iron-free serpentine rock is 3.62 GJ/t-CO2. This value can increase by 16 - 68% depending on the type of iron compound (FeO, Fe2O3 or Fe3O4) in the mineral. This suggests that the benefit from the potential use of FeOOH as an iron ore feedstock in iron and steelmaking should be determined by considering the energy, cost and emissions associated with the FeOOH by-product. AS recovery through crystallization is the second most energy intensive unit operation after the extraction reaction. However, the choice of mechanical vapor recompression (MVR) over the “simple evaporation” crystallization method has a potential energy savings of 15.2 GJ/t-CO2 (84 % savings). Integrating the Mg(OH)2 production method and the gas/solid carbonation process could provide up to an 25% energy offset to the CCM process energy requirements. Life cycle inventory assessment (LCIA) results show that for every ton of CO2 mineralized, the ÅAU CCM process avoids 430 - 480 kg CO2. The Mg(OH)2 process studied in this thesis has many promising features. Even at the current high energy and environmental burden, producing Mg(OH)2 from Mg-silicates can play a significant role in advancing CCM processes. However, dedicated future research and development (R&D) have potential to significantly improve the Mg(OH)2 process performance.

The Environmental Status of the Port of HaminaKotka

This study is a part of the Ecologically Friendly Port Ust-Luga (EFP) project. The purpose of this study is to examine the environmental status of the Finnish ports and, more specifically, the Port of HaminaKotka. An analysis of the environmental status is performed mainly as a literature review, because the Finnish ports must comply with Finnish and EU legislation and with the binding international regulations and conventions created by different organizations. The International Maritime Organisation (IMO) has done groundbreaking work in the field of maritime safety and maritime environmental protection. The MARPOL convention has a great impact on decreasing pollution from international shipping and it applies to 99% of the world’s merchant tonnage. Pollution prevention covers: Oil pollution, Chemical pollution, Air pollution and GHG Emissions, Dumping of Wasted and Other Matters, Garbage, Sewage, Port Reception Facilities, Special Areas under MARPOL and Particularly Sensitive Sea Areas. There is also Pollution Prevention for other treaties like anti-fouling systems used on ships, the transfer of alien species by ships’ ballast water and the environmentally sound recycling of ships. There are more than twenty different EU and international regulations that influence ports and port operations in Finland. In addition, there is also national legislation that has an effect on Finnish ports. For the most part, the legislation for ports is common in the EU area, but the biggest and most important difference between the legislation in Finland and other EU countries is due to the Act on Environmental Impact Assessment Procedure. The Act states that the environmental impact assessment procedure shall be applied to projects that may have significant adverse environmental impacts, due to the special features of Finland`s nature and environment. In this Act, the term environmental impact refers to the direct and indirect effects inside and outside Finnish territory of a project or operations on human health, living conditions and amenity; soil, water, air, climate, organisms, interaction between them and biodiversity; community structure, buildings, landscape, townscape and cultural heritage; utilization of natural resources. In Finland, the Environmental Permit requires that ports collect all necessary information concerning environmental effects and make required reports to the Finnish authorities, stakeholders and the public. Commonly, environmental reporting is public and environmental achievements are emphasized in reporting and in media. At the moment, the problem in environmental reporting is that it’s difficult to compare data from different ports. There is enough data concerning the environmental effects and performance, but the manner of reporting and the quality of the data varies between ports. There are differences in the units and codes used, in some cases the information is not sufficient and it can even be rather unreliable. There are also differences regarding the subjects that are emphasized in reporting.

Sorption of fomesafen in Brazilian soils

The study of the dynamics of a herbicide in the soil focus on the interactions with environmental components to obtain agronomic efficiency, ensuring selectivity to the culture and risk reduction of environmental impact. This study evaluated the sorption process of fomesafen in the Brazilian soils Ultisol, Cambisol, and Organosol. Besides soil, washed sand was used as an inert material for determination of the sorption ratio of fomesafen in the soil. The bioassay method was applied, using Sorghum vulgare plants as bio-indicator of herbicide presence. Plant poisoning evaluation and harvest for dry matter determination were carried out 21 days after sorghum sowing. To calculate C50, the nonlinear log-logistic model was applied and sorption ratios of the herbicide were obtained in different soils. The decreasing sorption ratio of formesafen in the soils was: Organosol > Ultisol > Cambisol. It was concluded that the contents of organic matter and clay in the soils were the attributes that most influenced fomesafen sorption.

Sustainable Gold Mining- Life Cycle Assessment of Cyanidation and Thiosulphate Leaching

With the increasing concern of the sustainable approach of gold mining, thiosulphate has been researched as an alternative lixiviant to cyanide since cyanide is toxic to the environment. In order to investigate the possibility of thiosulphate leaching application in the coming future, life cycle assessment, is conducted to compare the environmental footprint of cyanidation and thiosulphate leaching. The result showed the most significant environmental impact of cyanidation is toxicity to human, while the ammonia of thiosulphate leaching is also a major concern of acidification. In addition, an ecosystem evaluation is also performed to indicate the potential damages caused by an example of cyanide spill at Kittilä mine, resulting in significant environmental risk cost that has to be taken into account for decision making. From the opinion collected from an online LinkedIn discussion forum, the anxiety of sustainability alone would not be enough to contribute a significant change of conventional cyanidation, until the tighten policy of cyanide use. International Cyanide Code, therefore, is crucial for safe gold production. Nevertheless, it is still thoughtful to consider the values of healthy ecosystem and the gold for long-term benefit.

Evaluating land-use related environmental impacts of biomass value chains for decision-support : Comparison and testing of methodologies proposed for environmental life cycle assessment

Life cycle assessment (LCA) is one of the most established quantitative tools for environmental impact assessment of products. To be able to provide support to environmentally-aware decision makers on environmental impacts of biomass value-chains, the scope of LCA methodology needs to be augmented to cover landuse related environmental impacts. This dissertation focuses on analysing and discussing potential impact assessment methods, conceptual models and environmental indicators that have been proposed to be implemented into the LCA framework for impacts of land use. The applicability of proposed indicators and impact assessment frameworks is tested from practitioners' perspective, especially focusing on forest biomass value chains. The impacts of land use on biodiversity, resource depletion, climate change and other ecosystem services is analysed and discussed and the interplay in between value choices in LCA modelling and the decision-making situations to be supported is critically discussed. It was found out that land use impact indicators are necessary in LCA in highlighting differences in impacts from distinct land use classes. However, many open questions remain on certainty of highlighting actual impacts of land use, especially regarding impacts of managed forest land use on biodiversity and ecosystem services such as water regulation and purification. The climate impact of energy use of boreal stemwood was found to be higher in the short term and lower in the long-term in comparison with fossil fuels that emit identical amount of CO2 in combustion, due to changes implied to forest C stocks. The climate impacts of energy use of boreal stemwood were found to be higher than the previous estimates suggest on forest residues and stumps. The product lifetime was found to have much higher influence on the climate impacts of woodbased value chains than the origin of stemwood either from thinnings or final fellings. Climate neutrality seems to be likely only in the case when almost all the carbon of harvested wood is stored in long-lived wooden products. In the current form, the land use impacts cannot be modelled with a high degree of certainty nor communicated with adequate level of clarity to decision makers. The academia needs to keep on improving the modelling framework, and more importantly, clearly communicate to decision-makers the limited certainty on whether land-use intensive activities can help in meeting the strict mitigation targets we are globally facing.

A Web-Based Environmental Toolkit to Support Small and Medium-Sized Enterprises in the Implementation of Their Own Environmental Management System

With small and medium sized-enterprises (SMEs) taking up the majority of the global businesses, it is important they act in an environmentally responsible manner. Environmental management systems (EMS) help companies evaluate and improve their environmental impact but they often require human, financial, and temporary resources that not all SMEs can provide. This research encompasses interviews with representatives of two small enterprises in Germany to provide insights into their understanding, and knowledge of an EMS and how they perceive their responsibility towards the environment. Furthermore, it presents a toolkit created especially for small and medium-sized enterprises that serves as a simplified version of an EMS based on the ISO 14001 standard and is evaluated by the representatives of the SMEs. Some of the findings are: while being open to the idea of improving their environmental impact, SMEs do not always feel it is their responsibility to do so; they seem to lack the means to fully implement an EMS. The developed toolkit is considered useful and usable and recommendations are drawn for its future enhancement.

Assessing environmental impacts using a comparative LCA of industrial and artisanal production processes: "Minas Cheese" case

This study uses the Life Cycle Assessment (LCA) methodology to evaluate and compare the environmental impacts caused by both the artisanal and the industrial manufacturing processes of "Minas cheese". This is a traditional cheese produced in the state of Minas Gerais (Brazil), and it is considered a "cultural patrimony" in the country. The high participation of artisanal producers in the market justifies this research, and this analysis can help the identification of opportunities to improve the environmental performance of several stages of the production system. The environmental impacts caused were also assessed and compared. The functional unit adopted was 1 kilogram (Kg) of cheese. The system boundaries considered were the production process, conservation of product (before sale), and transport to consumer market. The milk production process was considered similar in both cases, and therefore it was not included in the assessment. The data were collected through interviews with the producers, observation, and a literature review; they were ordered and processed using the SimaPro 7 LCA software. According to the impact categories analyzed, the artisanal production exerted lower environmental impacts. This can be justified mainly because the industrial process includes the pasteurization stage, which uses dry wood as an energy source and refrigeration.

Environmental assessment and biomonitoring of the Twelve Mile Creek watershed, Niagara Peninsula, Ontario

In light of the heavy reliance of the people of the Niagara Peninsula on the T\\'elve Mile Creek (TMC) watershed for recreational activities and for municipal and industrial uses ( e.g., drinking water, shipping and discharge of effluents), it was deemed prudent to assess the envirol1tnental health of the system by analysing the sediments total and exchangeable metal, and TPH contents. The MOEE has set guidelines with limits for the protection and management of aquatic sediments, and the sediments from the headwaters of the TMC have total metal and TPH (subset of O&G) contents well below the lower provincial limits. Areas of environmental concern where total metal contents in sediments, either individually or collectively, exceed the guideline, are the south side of Lake Gibson, the Old WeIland Canal, a segment of TMC just south of the QEW and Martindale Pond. The total metal content of sediments does not in all instances identify areas of biological concern. Instead, it has been found that the exchangeable metal fraction of sediments is a better indicator of metal availability and thus potential accumulation in organisms. In some instances, the exchangeable metal fraction agrees with the total metal fraction defining areas of environmental concern, but it does vary from site to site reflecting the natural variability of the ambient environment. Overall, the exchangeable metal fraction of sediments appears to be a better indicator of anthropogenic pollution and ecosystem impact. A histochemical study of Anodon.ta sp., Elliptio sp. and zebra mussels (Dreissena polyn'101pha) was done in conjunction with passive biomonitoring of zebra and quagga mussels (Dreissena bugensis) from the Twelve Mile Creek watershed and Lake 51. Clair (Jeanette's Creek, Chatham, Ontario). The highest concentrations of divalent metals such as Cu, Ni, Cd, and Zn, and trivalent Al appear to accumulate in gill and kidney tissues. Metal contents of organ tissues in Anodonta sp. vary with size class. Organ metal content varies among size classes, thus requiring consideration of size in biomonitoring studies. Shucked zebra and quagga mussel tissues, exhibited similar size class to Al content trends. In addition they reflected the Al content trends of top (approximately 10 cm) most sediments in the Twelve Mile Creek watershed. Quagga mussels appear to have higher Al concentrations than zebra mussels, thus suggesting that quagga mussels may be better passive biomonitors of AI. Cd content in zebra mussel tissues, seemed to increase with size class trends. This was not demonstrated in the quagga mussel tissues. This suggests that Cd may be regulated by quagga mussels and not by zebra mussels, and that zebra mussels may be better passivebiomonitors of Cd than are quagga mussels. Zebra mussel, quagga mussel, Anodonta sp., and Elliptio sp. were used in a two part, active (translocated) biomonitoring study of the Twelve Mile Creek watershed. There was no statistical difference in death rates between zebra and quagga mussels after 65 days of biomonitoring. However there does appear to be a difference of death rates between sites. Unfortunately the data base did not permit us to differentiate between sites. Relative to Port Colborne Harbour (Port Colborne, Ontario), the Twelve Mile Creek watershed appears to be elevated in bioavailable AI. An area near the terminus of the Twelve Mile Creek appears to be an area of environmental concern since mussels seemed to have accumulated relatively large concentrations of Cd, Zn, and Pb. In addition to possible metal loading from a nearby outfalls, or possible upstream outfalls, road salt runoff from storm sewers may have contributed to metal accumulation through cation exchanges processes. Similar trends in cumulative quagga mussel metal concentrations during the two time periods (65 and 159 days), suggest that quagga mussels may reach equilibrium within 65 days of translocation. Differences in bioaccumulated metal concentrations of the two dreissenid species demonstrate that active biomonitoring studies must use a variety of organisms to adequately assess the environmental situation of specific waterways and/or bodies.

Investigation of the composition of linear alkylbenzenes with emphasis on the identification and quantitation of some trace compounds using GS/MS system in both electron impact and chemical ionization modes

Linear alkylbenzenes, LAB, formed by the Alel3 or HF catalyzed alkylation of benzene are common raw materials for surfactant manufacture. Normally they are sulphonated using S03 or oleum to give the corresponding linear alkylbenzene sulphonates In >95 % yield. As concern has grown about the environmental impact of surfactants,' questions have been raised about the trace levels of unreacted raw materials, linear alkylbenzenes and minor impurities present in them. With the advent of modem analytical instruments and techniques, namely GCIMS, the opportunity has arisen to identify the exact nature of these impurities and to determine the actual levels of them present in the commercial linear ,alkylbenzenes. The object of the proposed study was to separate, identify and quantify major and minor components (1-10%) in commercial linear alkylbenzenes. The focus of this study was on the structure elucidation and determination of impurities and on the qualitative determination of them in all analyzed linear alkylbenzene samples. A gas chromatography/mass spectrometry, (GCIMS) study was performed o~ five samples from the same manufacturer (different production dates) and then it was followed by the analyses of ten commercial linear alkylbenzenes from four different suppliers. All the major components, namely linear alkylbenzene isomers, followed the same elution pattern with the 2-phenyl isomer eluting last. The individual isomers were identified by interpretation of their electron impact and chemical ionization mass spectra. The percent isomer distribution was found to be different from sample to sample. Average molecular weights were calculated using two methods, GC and GCIMS, and compared with the results reported on the Certificate of Analyses (C.O.A.) provided by the manufacturers of commercial linear alkylbenzenes. The GC results in most cases agreed with the reported values, whereas GC/MS results were significantly lower, between 0.41 and 3.29 amu. The minor components, impurities such as branched alkylbenzenes and dialkyltetralins eluted according to their molecular weights. Their fragmentation patterns were studied using electron impact ionization mode and their molecular weight ions confirmed by a 'soft ionization technique', chemical ionization. The level of impurities present i~ the analyzed commercial linear alkylbenzenes was expressed as the percent of the total sample weight, as well as, in mg/g. The percent of impurities was observed to vary between 4.5 % and 16.8 % with the highest being in sample "I". Quantitation (mg/g) of impurities such as branched alkylbenzenes and dialkyltetralins was done using cis/trans-l,4,6,7-tetramethyltetralin as an internal standard. Samples were analyzed using .GC/MS system operating under full scan and single ion monitoring data acquisition modes. The latter data acquisition mode, which offers higher sensitivity, was used to analyze all samples under investigation for presence of linear dialkyltetralins. Dialkyltetralins were reported quantitatively, whereas branched alkylbenzenes were reported semi-qualitatively. The GC/MS method that was developed during the course of this study allowed identification of some other trace impurities present in commercial LABs. Compounds such as non-linear dialkyltetralins, dialkylindanes, diphenylalkanes and alkylnaphthalenes were identified but their detailed structure elucidation and the quantitation was beyond the scope of this study. However, further investigation of these compounds will be the subject of a future study.

Évaluation environnementale de systèmes de construction de cloisons résidentielles : réflexions sur l'adaptabilité et la flexibilité

L’introduction du développement durable apporte de nouvelles préoccupations environnementales au niveau de la construction et de la rénovation résidentielles, une industrie qui représente un marché économique important au Canada. En plus d’engendrer plusieurs impacts sur l’environnement, la conception actuelle ne permet pas d’accommoder le changement initié par l’évolution des pratiques, les avancées technologiques, mais également par l’évolution des patrons de vie des occupants. Dans un premier temps, la revue de littérature dresse le portrait de l’industrie de la construction, rénovation et démolition (CRD) au Canada, ainsi que le profil de gestion des débris de CRD. Ensuite, une analyse documentaire traite de différents outils de conception développés pour améliorer la performance du secteur : 3RV-E, écoconception, écoconstruction et LEED®. De plus, la recension des écrits permet également de cerner les concepts d’adaptabilité et de flexibilité au niveau du bâtiment et dans les approches et mouvements émergents en architecture. Cette démarche nous amène à établir l’hypothèse que l’intégration des critères d’adaptabilité et de flexibilité au niveau du logement aurait pour effet d’améliorer l’adéquation entre les besoins évolutifs des occupants et les nouvelles considérations environnementales. Au niveau méthodologique, l’analyse du cycle de vie simplifiée par l’Eco-indicator99 encadre l’analyse environnementale de l’ossature de trois types de construction de cloison. De cette évaluation, on conclut que c’est la construction traditionnelle à ossature de bois qui produit le moins d’impacts. Dans l’ordre suivant la proposition de construction de cloison à ossature d’aluminium, plus adaptable et flexible, et finalement la construction à ossature d’acier qui est le système le plus dommageable. Par contre, en intégrant le facteur temporel, cette analyse démontre que l’intégration de l’adaptabilité et de la flexibilité procure plusieurs cycles de vie et de rénovation au produit et à ses composantes. Finalement, ces concepts offrent également le potentiel de diminuer les impacts générés par la construction et la rénovation, un constat qui mériterait d’être abordé dans une approche plus systémique.

Studies on Dredging Impact Assessment(DIA) at Cochin, A Tropical Estuarine Harbour

Department of Physical Oceanography, School of Marine Sciences,Cochin University of Science and Technology

Environmental Geochemistry of Core Sediment in the Cochin Estuary (CE), India

Distribution of toxic metal in the sediment core is an important area of research for environmental impact studies. Sediment cores were collected from two prominent region(C1 and C2) of CE and subjected to geochemical analysis to determine distribution of toxic metals (Cd, Co, Cr, Cu and Pb ), texture characteristics, total organic carbon (TOC) and CHNS. Statistical analysis was done to understand the interrelationship between the components. In the studied cores, metal contamination level was identified for Pb, Cu; Cr, in C1 and C2 respectively. The metal distribution depends on the granulometric factor, geogenic mineral components and anthropogenic input. Correlation analysis (CA) and Principal component(PCA) analysis also support these results